RSS
 

Archive for August, 2020

Is There a Right and a Wrong Way To Expose Your Photos?

27 Aug

The post Is There a Right and a Wrong Way To Expose Your Photos? appeared first on Digital Photography School. It was authored by Kevin Landwer-Johan.

I have never liked the term ‘correct exposure.’ I don’t believe there’s often a single right way to expose your photos. There’s always room for artistic interpretation depending on:

  • Light
  • Subject
  • Camera
  • Lens
  • Exposure setting choices
  • Composition choices
  • Intent

All these will have some influence on the way a photograph will appear. One of the most important aspects of achieving a pleasing exposure is your intent. This cannot be measured by an exposure meter.

Buddha statue for Expose your photos
© Kevin Landwer-Johan. Nikon D800 | 35mm | 1/8000 sec | f/2.8 | ISO 400.

Choose how you expose your photos

How you expose your photos is a key choice when working with your camera. Most photos you take will display variation in tone from the brightest point to the darkest. You won’t often photograph subjects that are the same tone throughout.

The quality of light and how it reflects off the surfaces in your composition will help determine the exposure value for each tone. Sometimes the range of tones in a composition means your camera will not be able to render them all with visible detail.

Young Chinese woman on a white background
© Kevin Landwer-Johan. Nikon D800 | 35mm | 1/200 sec | f/1.4 | ISO 100.

When the level of contrast is beyond what your camera’s sensor can capture in a single exposure, you have to choose how to expose your photos. What is the most important part of the composition you want to expose correctly? Often this will be the middle tones. Other times it will be either the highlights or the darkest parts of your composition.

Particularly with high contrast lighting, you must choose how you want to expose your photograph. This is where the intent you have for how the photo will look comes into play. Do you want a bright, energetic image, or a more somber and moody one? What look will best suit your subject?

With a more monotone subject, the tonal range will not be large, especially when what you are photographing is not highly reflective. It was very easy to make a nice, even exposure of this dusty little dog lying in the dirt. This was because of the limited tonal range, low-contrast light, and overall beige color.

looking down at a dog on the dirt for expose your photos
© Kevin Landwer-Johan. Nikon D800 | 50mm |1/1000 sec | f/4.5 | ISO 400.

Think like a film photographer

The dynamic range of film is far narrower than that of modern camera sensors. Our digital cameras are far more capable of recording a broader tonal range in a single image than any film. When you take photos with film, you need to be more precise about how you expose your photos. This is more vital in high contrast situations.

Because the tonal range of film is much narrower, you’re more likely to lose detail in the shadows and/or highlights than when you work with a digital camera. Imagining that you are using film can help you be more aware of what part of your composition you want to expose well.

Novice Buddhist monk in the dark
© Kevin Landwer-Johan. Nikon D800 | 35mm | 1/125 sec | f/3.2 | ISO 1000.

For example, when I photographed this novice monk (above), he was in a dark space with light coming through a window. The contrast was significant. I knew that if I let my camera decide the exposure, it would mean the light area of the boy’s face would be overexposed. This is because most of the composition was in shadow.

I used my spot meter to take an exposure reading from the light reflecting off the monk’s face and set my exposure accordingly. In my original file, there is some detail visible in the shadows. I have boosted the contrast during post-processing to eliminate it.

The bell-shaped histogram myth

The notion that a correctly exposed image will produce a bell-shaped histogram is nonsense. You can’t rely on a histogram to provide useful information about exposure.

Histograms are a graphical representation of the tones present in a photo. When the photo is mostly middle tones, you’ll see the histogram as a bell shape: high in the middle section and low toward the left and the right.

The tonal range of the scene you are photographing has an influence on what the histogram will look like. This is why you cannot gauge exposure by looking at the histogram. Some people may find it helpful, but it’s not good practice to rely on it to help you choose your exposure settings. Don’t aim to make your histogram a bell shape.

Old Karen woman against a black background for expose your photos
© Kevin Landwer-Johan. Nikon D800 | 85mm | 1/640 sec | f/2.8 | ISO 400.

For example, portraits made against a black background will never display a bell-shaped histogram. The graph will always spike on the left because there are more dark tones in the image than midtones or light tones. Depending on what a person is wearing, such a histogram may be very flat.

For the image above, the grandma’s face is where I wanted the correct exposure. It would not be possible, even if I wanted it, to set my exposure so that detail in both the background and the headscarf was visible.

Expose your photos with intent

Know what you want before you press the shutter release.

Often, you have chosen your subject. You’ve composed carefully. Then you take a photo with no real regard for the lighting or your exposure setting.

Letting the camera take care of the exposure using averaged metering and an automatic setting is the way many people take pictures. The results of such exposures are relatively predictable. This is because of how cameras are designed and calibrated. To obtain the best exposure each time you take a photograph, you must match it to your intent.

How do you want the light on your subject to look? What is the mood you want your photo to convey? Are you capable of achieving this with the current lighting? These things must be considered before you press the shutter release.

Be in control of your exposure settings. Read your meter as a guide. Rather than ensuring that your meter is reading zero for every photo, adjust your settings to where you can capture the photo that matches your intent.

Buddhist nun at a temple for expose your photos
© Kevin Landwer-Johan. Nikon D800 | 35mm | 1/100 sec | f/2.8 | ISO 400.

Conclusion

I do not believe there is a right or wrong exposure choice for any photo. You can take into account all the technical aspects, but while this approach may produce technically correct images, they will often lack expression and feeling of any kind.

Not being intentional when you expose your photos often produces bland results.

The post Is There a Right and a Wrong Way To Expose Your Photos? appeared first on Digital Photography School. It was authored by Kevin Landwer-Johan.


Digital Photography School

 
Comments Off on Is There a Right and a Wrong Way To Expose Your Photos?

Posted in Photography

 

Ricoh releases Silver Edition version of its Pentax K-1 Mark II DSLR, three D FA* lenses

27 Aug

Ricoh has announced the limited release of a Silver edition of its Pentax K-1 Mark II DSLR as well as, for the first time ever, silver versions of its D FA* lenses.

The limited-edition camera is identical to its black counterpart, complete with a 36MP full-frame CMOS sensor, Safox 12 autofocus system with 33 AF points and a maximum ISO of 819,200. The only difference is the paint scheme, which is silver with contrasting parts, including a black shutter release and hot shoe.

In addition to the camera, Ricoh is also releasing Silver edition versions of three lenses: the HD Pentax-D FA* 70–200mm F2.8, 50mm F1.4 and 85mm F1.4. Like the camera, these lenses are identical to their black counterparts, but unlike the camera, just 600 units for each model will be produced.

This isn’t the first time Ricoh has released Silver editions of their gear. In March 2010, the Pentax K-7 Limited Silver camera was released and, more recently, the Pentax K-1 Limited Silver was released in September 2017.

The Pentax K-1 Mark II Silver Edition camera body will be available in September for $ 2100. The lenses will also be released in September with prices ranging from $ 1200–2100. All Silver Edition cameras and lenses will come with specially designed product boxes.

Press release:

Ricoh announces Silver Edition of PENTAX K-1 Mark II, plus three HD PENTAX-D FA? Silver Edition lenses

PARSIPPANY, NJ, August 26, 2020 – Ricoh Imaging Americas Corporation today announced the PENTAX K-1 Mark II Silver Edition, a special silver-colored version of its digital single-lens reflex (SLR) flagship model. Ricoh is also releasing for the first time silver versions of its D FA? series lenses, with high-grade silver coating that is especially well suited to the top-of-the-line PENTAX optics.

The camera will be available in a limited quantity of 1,000 units worldwide, and the three lenses— HD PENTAX-D FA? 70-200mm f/2.8, 50mm f/1.4 and 85mm f/1.4—will be available worldwide in limited quantities of 600 units for each model. These lenses join the silver-edition PENTAX full-frame lenses currently available: SMC PENTAX FA 31mm F1.8 LTD, SMC PENTAX FA 43mm F1.9 LTD and SMC PENTAX FA 77mm F1.8 LTD.

The limited-edition silver models of the camera and lenses are coveted by PENTAX photographers worldwide. The PENTAX K-1 Mark II Silver Edition camera sports contrasting black parts–a shutter release button and hot shoe—to provide a handsome complementary color and enable it to be color coordinated whether used with traditional black or the special silver-colored lenses.

Previously issued limited-edition cameras include the PENTAX K-7 Limited Silver (March 2010) and the PENTAX K-1 Limited Silver (September 2017).

Pricing and Availability

The PENTAX K-1 Mark II Silver Edition camera body will be available in September for a manufacturer’s suggested retail price of $ 2099.95. The HD PENTAX-D FA? Silver Edition lenses will be available in September with prices ranging from $ 1199.95 – $ 2099.95. Both the camera and lenses can be purchased at www.us.ricoh-imaging.com and at select Ricoh Imaging-authorized retail outlets.

Main features of the PENTAX K-1 Mark II Silver Edition

  • ? The camera body and detachable battery grip feature a high-grade, fine-textured silver coating, with an exclusive silver SR badge placed on the front of the body.

  • ? The camera’s shutter release button and hot shoe, as well as the battery grip’s shutter release button, feature black parts, so the camera is coordinated with either black or silver lenses.

  • ? Each camera has been given a unique serial number, from 0000001 to 0001000, to further support its exclusivity.

  • ? Two exclusive batteries are included in a product package to simultaneously power both the camera body and the battery grip.

  • This special camera and its accessories come in a specially-designed product box.

  • The camera body comes with the latest firmware version pre-installed.

Main features of the HD PENTAX-D FA? Silver Edition lenses

  • The lenses’ high-grade silver coating complements their use with silver-edition camera bodies.
  • Each lens has been given a unique serial number, from 0000001 to 0000600, to further support its exclusivity.
  • The lenses come in a specially-designed product box.

NOTE: The features and specifications of this camera body and lenses are identical to those of standard models, except for the camera firmware

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Ricoh releases Silver Edition version of its Pentax K-1 Mark II DSLR, three D FA* lenses

Posted in Uncategorized

 

Canon releases FW 1.1 for EOS R5, with bug fixes and improvements to video shooting time

27 Aug

Canon has released firmware 1.1 for the EOS R5. Alongside a flurry of minor bug fixes, the new firmware also promises to improve video shooting times. We’ve had the new firmware for a few days, and prepared a test.

Check out Jordan’s take on the new firmware in the video, above, and see below for Canon’s official description of the changes in FW 1.1 and a link to download it.

Download firmware 1.1.0 for the Canon EOS R5 (Canon USA)

Press release:

Firmware Version 1.1.0 incorporates the following fixes and enhancements:

  • Useful messaging is now displayed when [HDMI display?Camera+External monitor] and [Overheat control: on] settings are enabled.
  • When using certain RF lenses for movie shooting, the in-lens image stabilization mechanism has been improved.
  • Fixes a phenomenon in which the “Slow Synchro” setting screen is not accurately displayed, when the language is set to English.
  • Fixes a typo displayed on the communication setting screen, when the language is set to Korean.
  • Connectivity during FTP transmission has been improved.
  • Fixes a phenomenon, in which the card access time may take longer, when using certain CF express cards.
  • Temperature detection and shooting time control in video shooting have been improved. In addition, the total shooting time when the short-time recording and power-on/off are performed repeatedly at room temperature is improved.
  • The phenomenon in which the movie recording time available is not correctly displayed when the Date/Time/Zone is not set has been corrected.

*The firmware scheduled for release in early September will incorporate the following improvements for the RF100-500mm F4.5-7.1 L IS USM.
-Supports 6-stop image stabilization. (CIPA-compliant)
-Improves IS capabilities when performing continuous shooting under specific conditions.

Firmware Version 1.1.0 is for cameras with firmware up to Version 1.0.0. If the camera’s firmware is already Version 1.1.0, it is not necessary to update the firmware.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon releases FW 1.1 for EOS R5, with bug fixes and improvements to video shooting time

Posted in Uncategorized

 

Canon EOS R6 Review: not the hybrid king, but a great photographers’ camera

27 Aug

Introduction

$ (document).ready(function() { SampleGalleryStripV2({“galleryId”:”0000646042″,”isMobile”:false}) })

Sample photoSample photoSample photoSample photoSample photo

All product photography by Dan Bracaglia

Gold Award

90%
Overall score

The Canon EOS R6 is a 20MP full-frame mirrorless camera aimed at enthusiast photographers and videographers. It sits below the R5 much as the EOS 6Ds did beneath the 5D DSLRs, and offers a well-rounded combination of features for both disciplines.

It’s also one of the first enthusiast-level cameras to shoot both stills and video that can exploit the capabilities of the latest high-dynamic range displays. However its tendency to hit its temperature limits take the edge off its video capabilities.

Key specifications:

  • 20MP Dual Pixel CMOS Sensor
  • In-body stabilization rated at up to 8EV of correction
  • Dual Pixel AF II with AI-trained subject tracking and 100% AF coverage
  • 20 fps shooting with e-shutter, 12 fps mechanical
  • UHD 4K shooting at up to 60p, 1080 at up to 120p
  • 10-bit 4:2:2 internal recording in either C-Log or HDR PQ
  • 10-bit HDR photos in HEIF format
  • 3.68M dot EVF
  • 1.62M dot fully-articulated rear touchscreen
  • New battery rated at around 380 shots per charge (EVF)

The R6 is available with a recommended price of $ 2499, body-only. It can also be bought in a kit with the 24-105mm F4L for around $ 3599 or with the 24-105mm F4-7.1 STM IS for approximately $ 2899.


What’s new and how it compares

The EOS R6 can’t boast 8K video but it’s got a solid feature set nonetheless, including the same IS and AF as its big brother.

Read more

Body, controls and handling

The R6 has elements of the original EOS R to its design but it also gains a fair amount from Canon’s DSLR range. We think the combination works nicely.

Initial impressions

We’ve been shooting with the EOS R6 and think Canon users (and, in particular, Canon DSLR users) will find a lot to like about the camera.

Image Quality

The 20MP sensor, combined with Canon’s JPEG color does a great job, despite having fewer pixels than its peers.

Read more

Dynamic Range

The EOS R6’s files prove very flexible, but that performance is aided by noise reduction you can’t turn off.

Read more

Autofocus

The EOS R6 offers at least the performance that the EOS-1D X III does in live view mode. It’s powerful, customizable yet often very easy-to-use.

Read more

Video

The EOS R6 can shoot some very attractive 4K footage, but despite a well thought-out interface, its propensity for hitting its thermal cut-off means it’s not as good a stills/video hybrid as the specs make out.

Read more

Conclusion

The EOS R6 has a lot going for it: it offers excellent image quality, shoots at high speeds and includes impressive image stabilization. It’s not the best stills-and-video option but it’s a superb photographer’s camera.

Read more

Sample gallery

We’ve put together a gallery from the EOS R6, to show what its image quality looks like.

See more

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon EOS R6 Review: not the hybrid king, but a great photographers’ camera

Posted in Uncategorized

 

Canon launches 1/1.8-inch sensor for video recording in extreme low light

27 Aug

Canon has announced a new CMOS image sensor that is designed to perform in extreme low light conditions. The LI7050’s is a sensor of the 1/1.8-inch variant which means it has the same size as many image sensors that can be found in smartphone cameras. However, this is not the new sensor’s intended use.

Instead it’s meant to be used for industrial applications that require extreme low light capabilities. For example, it could record low light video with realistic color and good detail in security cameras that are monitoring public areas, transport infrastructure or manufacturing facilities. Thanks to its compact dimensions it could also help improve image quality in underwater drones or wearable cameras for security personnel that operates in dark environments.

Canon says in its press release: ‘Conventional nighttime monitoring employs infrared cameras and records video in monochrome. However, network cameras equipped with the LI7050 can capture video at night in such locations as public facilities, roads or transport networks, thereby helping to identify details including the color of vehicles or subjects’ clothing.’

Thanks to the ‘architecture’ of its 4.1 µm pixels the sensor is capable of recording Full-HD color video in near darkness – light levels as low as 0.08 lux – and also comes with an HDR mode that dramatically expands the dynamic range. When recording in this mode the sensor can capture scenes with extremely high contrast (light levels between 0.08 lux and 80,000 lux) while avoiding clipping in both highlight and shadow areas of the frame, achieving a dynamic range of 120dB (approximately 20EV).

HDR mode merges a bright and a dark exposure into one frame and is only available at 30 frames per second. If you need faster frame rates of 60 frames per second the sensor can still avoid clipping anywhere between 0.08 and 500 lux and offers a dynamic range of 75dB (approximately 12.5 EV).

Those are impressive numbers and they are backed up by the low light footage in Canon’s sample clips which does not only have very good exposure but also maintains excellent detail in the bright illuminated areas of the frame, something that a lot of cameras struggle with.

Even though the sensor is marketed as a security and surveillance product there could be interesting applications in consumer imaging as well. Modern smartphones come with multi-camera arrays for different focal length already. Why not add a dedicated low light video camera?

Sample shipments of the LI7050 have started in August and official sales will be launched in late October. We’ll probably see sometime next year if the new sensor will be confined to its industry niche or possibly make it out to the wider consumer imaging market.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon launches 1/1.8-inch sensor for video recording in extreme low light

Posted in Uncategorized

 

DJI releases its newest smartphone gimbal, the Osmo Mobile 4

26 Aug

DJI has unveiled its latest smartphone gimbal, the Osmo Mobile 4 (OM4). Like its predecessors, the OM4 is an ultra-compact three-axis gimbal for keeping your smartphone footage as stable as possible, with a few other unique features baked in.

Visually, the OM4 isn’t much different than its predecessor, the Osmo Mobile 3 (OM3). It is a light grey instead of a darker grey, but aside from the joystick, trigger and grip being a bit more rubberized, the body of the gimbal remains largely unchanged.

The only functional difference is a new mounting system that uses magnets to hold the phone in place. Whereas the OM3 had a built-in clamp, the OM4 has a clamp that can be removed and kept on a smartphone, then snapped back into place when the gimbal is needed. There’s even a small sticker-style mounting bracket that can be semi-permanently attached to a smartphone for even faster operation.

The OM4 works alongside the DJI Mimo app to enable multiple shooting modes, including an improved ActiveTrack 3.0, Gesture Control and pre-programmed movements and modes. Three of the new pre-programmed modes include Dynamic Zoom, Spin Mode and a ‘Clone Me’ panorama mode.

Dynamic Zoom is effectively a digital dolly zoom feature, that allows you to move away from the subject while the DJI Mimo app automatically zooms in, or move in as the app zooms out. Spin mode is an Inception-inspired mode that makes it possible to rotate the smartphone for a spinning effect (although it’s not posisble to do a full 360-degree spin). The ‘Clone Me’ panorama feature is another new mode that will wait between shots of a panorama so you can move into place and be ‘cloned’ in the final image.

Even if you don’t want to use the DJI Mimo app, the OM4 can also control basic camera functions with the stock iOS camera app when connected via Bluetooth.

The DJI Osmo Mobile 4 is available to order from the DJI Store and authorized retailers for $ 149. It comes with a wrist strap, grip tripod and storage pouch.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DJI releases its newest smartphone gimbal, the Osmo Mobile 4

Posted in Uncategorized

 

Tips for Managing Digital Noise in Lightroom and Photoshop

26 Aug

The post Tips for Managing Digital Noise in Lightroom and Photoshop appeared first on Digital Photography School. It was authored by Kevin Landwer-Johan.

If you’ve ever set your ISO toward the higher end of your camera’s range, you will find that your photos don’t always turn out so great. Digital noise is generally noticeable in photos that have been taken with a high ISO setting. Managing digital noise is important when you move toward the limits of your camera’s ISO range.

In this article, we’ll take a look at various techniques, both in-camera and during post-processing, for managing digital noise.

Person launching a sky lantern at the Loi Krathong festivlal in Thailand.
© Kevin Landwer-Johan. Nikon D700 | 70mm | 1/100 sec | f/2.8 | ISO 6400.

What does digital noise look like?

Digital noise appears like colored sand scattered through your photos. It’s particularly noticeable in darker and lighter areas of your compositions when you’ve used a high ISO setting.

Noise varies from camera to camera depending on the quality of the sensor. You’ll have noticed it in photos made with your smartphone at night. When the light is low and the ISO is high, a phone or camera with a very small sensor is prone to producing a lot of digital noise. On higher-end full-frame cameras there’s not so much of an issue with digital noise until your ISO reaches the highest settings it’s capable of.

At first glance, digital noise may not be so noticeable. But when you enlarge an image made using a high ISO, it is easy to see noise speckles. These speckles are discolored pixels and pixels with an incorrect luminance value. They contrast with the surroundings in an unnatural way.

Digital noise in photos is not the same as grain. Grain is associated with film and has a different appearance than digital noise. Different types of film have different grain structures. Grain can be used to creatively enhance photos, whereas digital noise degrades an image.

Managing digital noise detail
Detail showing digital noise. Nikon D700 | 70mm | 1/100 sec | f/2.8 | ISO 6400.

Two types of digital noise

There are two types of digital noise that affect your photos when you use a high ISO setting. These are color noise and luminance noise

Color noise, or chromatic noise, appears as discolored pixels that contrast with how the colors in a photo should look. It’s most apparent in the very light or very dark areas of photos taken at high ISO settings. Sometimes this type of noise is difficult to eradicate. The best approach can be to simply convert your photo to black and white.

Luminance noise shows up as pixels that are brighter than they should be. When you raise the ISO setting on your camera, the pixels on the sensor become amplified and distort. Think of it as like turning the volume on your stereo up too high to the point that the sound distorts.

How can you avoid digital noise in photos?

The most surefire way to avoid digital noise is to keep your ISO setting low. This is not always possible, especially when photographing in low light conditions.

Raising your ISO increases the risk of adding unsightly noise, but it also allows you to choose a narrower aperture and faster shutter speed. 

Getting sharp photos of action at night requires a fast shutter speed. And an easy way to achieve this is by raising your ISO setting. So it’s not always possible to avoid noise. Managing digital noise when you post-process your photos then becomes necessary. There are various tricks and tools you can use to do this.

launching a sky lantern during Loi Krathong festival in Thailand
© Kevin Landwer-Johan. Nikon D700 | 35mm | 1/100 sec | f/2.8 | ISO 6400.

Try this exercise to discover the highest ISO setting you are comfortable using on your camera:

Find a reasonably dark place to take photos of a static subject, such as a room with the drapes drawn or outside at night. Set your camera on a tripod, or on a firm surface where it won’t move.

You can set your camera to any exposure mode you’re comfortable with, but you must set your ISO to manual. And if you use your camera’s manual exposure setting, balance your aperture or shutter speed before each shot (so your meter is always reading zero).

Start with the lowest ISO setting. This is usually ISO 100. Take a photo of your subject. Then change your ISO setting to 200. Take another photo.

Repeat this process, doubling the ISO, until you have taken a series of images throughout the ISO range.

Study the photos on your computer. Zoom in to 100% and look at the digital noise. At what ISO setting does the digital noise appear to degrade image quality? The ISO setting below that point should be the maximum you use.

How can you reduce digital noise in photos?

sky lanterns being released during the Loi Krathong festival in Thailand
Unprocessed photo. © Kevin Landwer-Johan. Nikon D700 | 24mm | 1/100 sec | f/3.2 | ISO 6400.

Post-processing programs and apps have functions that can reduce digital noise in photos. 

The less noise apparent in a photo, the more successfully you can remove it. If you’re too aggressive with managing digital noise, your photos will appear soft and blurry.

managing digital noise illustration from Lightroom
Detail showing digital noise.

Reducing digital noise using Lightroom

In the Develop module in Lightroom, click on the Details Panel on the right side of the screen. Here you’ll see a number of sliders. The ones you want to use are the Luminance and Color sliders.

Start with Luminance slider and drag it to the right. Then slide the Color slider if you still see some noise. Watch what’s happening to your image as you do this. You don’t want to slide it further than you need to. The further to the right you move these controls, the softer your image becomes.

The amount you need to adjust the sliders will vary from image to image.

Managing Digital Noise detail showing reduced noise.
Detail with noise reduced. Note the position of the Color and Luminance sliders.

Reducing digital noise using Photoshop

If you prefer using Photoshop, you’ll still find good controls for managing digital noise. 

In the top menu select Filter>Camera Raw Filter. In the new window that opens, select the Details icon (it’s the two triangles). Here you have the same two sliders as in Lightroom: Luminance and Color. Slide them to the right only enough to get a satisfactory result.

Managing Digital noise in Photoshop
Detail of unprocessed image showing noise reduction tools in Photoshop.

You can further reduce noise by selecting Filter>Noise>Reduce Noise from the top menu. 

Managing digital noise in Photoshop
Applying the noise reduction filter in Photoshop.

Photoshop allows you more flexibility in reducing noise. You can isolate the problem areas with masks or multiple layers. This can help retain detail in important areas of your compositions.

Try this noise reduction technique

When you are photographing a static subject and have your camera on a tripod, take two or more photos. 

Open two of the photos in separate layers of the same file in Photoshop. Once you’ve done this, the easiest way to reduce the noise and retain clarity is by changing the blend mode of the top layer. The Multiply blend mode usually works well. You can also experiment with Overlay and Soft Light blend modes.

Conclusion

Whenever I’m taking photos, I try to maintain the lowest ISO setting possible to avoid digital noise. In many low light situations, using a higher ISO setting is necessary to take photos without extra lights.

Each camera model manages digital noise differently. Use the experiment I outlined in this article to ascertain the highest ISO setting at which you are comfortable shooting. 

Managing digital noise is now easier than ever. Cameras have more advanced sensors than early digital cameras had. And imaging software has also evolved to be better at managing digital noise.

The post Tips for Managing Digital Noise in Lightroom and Photoshop appeared first on Digital Photography School. It was authored by Kevin Landwer-Johan.


Digital Photography School

 
Comments Off on Tips for Managing Digital Noise in Lightroom and Photoshop

Posted in Photography

 

Landscape Photography: Complete Guide for Beginners; Equipment, Settings, and Tricks

26 Aug

The breathtaking landscape before you is just begging to be photographed. The only problem is that you don’t know how to do it. You try taking a few images, but upon reviewing them your disappointment sinks in. They don’t hold a candle to the real thing — and they certainly don’t look like those gorgeous landscape images that show up Continue Reading

The post Landscape Photography: Complete Guide for Beginners; Equipment, Settings, and Tricks appeared first on Photodoto.


Photodoto

 
Comments Off on Landscape Photography: Complete Guide for Beginners; Equipment, Settings, and Tricks

Posted in Photography

 

Netgear launches Meural WiFi Photo Frame with automatic wireless photo album syncing

26 Aug

Netgear has announced the Meural WiFi Photo Frame. The frame is designed to conveniently display your photographs using an accompanying smartphone application.

The Meural is a 13.5″ x 7.5″ frame with a 15.6″ diagonal display offering a 1920 x 1080 resolution and anti-glare coating. The display promises a wide viewing angle and ambient light sensor to ensure it looks good in any setting and from a large variety of angles. Including its bezel, the Meural Photo Frame is 16″ (408mm) wide, 10″ (259mm) tall and has a depth of 1.68″ (42.4mm). The frame weighs 2.9 lb. (1.3kg).

Like Netgear’s Meural Canvas before it, the smaller WiFi Photo Frame also utilizes touchless gestures for photo control, allowing you to scroll through images with a wave of your hand. The frame can also quickly be rotated between portrait and landscape orientation.

On the inside of the Meural is 1GB of DDR3 RAM, 8GB of storage (of which 4GB are utilized for storing photos), a Quad-core ARM processor and WiFi 802.11a/b/g/n/ac (2.4GHz and 5GHz). The frame includes gesture sensors for both portrait and landscape orientation, an orientation sensor itself and an ambient light sensor to automatically adjust brightness. The frame utilizes a DC power port for power and Netgear states that it uses approximately 20W during typical usage. The included power cord is 6′ long.

Image credit: Netgear

Using an app on your smartphone, you can link existing photo albums to automatically upload and display on the Meural WiFi Photo Frame. The frame can also display location and data information so you will always know when and where images were captured by simply gesturing upward. You can also use the app to invite family and friends to upload their own photo albums to a specific Meural. This means that distant family and friends can upload new photos to your own Meural, allowing you to quickly share memories with one another via personalized photo playlists.

Image credit: Netgear

The Meural Photo Frame is compatible with Apple and Android devices. For iPhone and iPad users, you must have iOS 11 or later. On Android, the frame is compatible with Android 5.0 or later. For iOS users, the Meural Photo Frame supports Live Photos. When using either compatible device, you can also display short videos up to 15 seconds in duration.

In addition to the power cord, the Meural WiFi Photo Frame also comes with a cleaning cloth, wall mount, wall anchor and screws (for drywall), pre-loaded sample art images from the Meural art library and a quick start guide. Speaking of the Meural art library, the library contains more than 30,000 images and artworks in total. You can schedule the display of your favorite art from the library.

Image credit: Netgear

Of the Meural WiFi Photo Frame, Netgear’s David Henry, senior vice president for Connected Home Products, says, ‘So many photos are captured on smartphones every day, yet many are not seen on screens that showcase them in their fullest, richest detail, With our new Meural WiFi Photo Frame we’ve created a new way to enjoy and relive those special memories.’ Henry continues, ‘[with the included connectivity features] this new premium photo frame will also help to keep people close in a time when we all need to stay connected.’

The Meural Photo Frame is available to order now for $ 299.95 USD. The frame is available in one colorway: charcoal gray bezel with a wood-grain inlay. The full Meural art library membership is $ 8.95 USD per month or $ 69.95 per year. The membership is not required. However, membership does add 16GB to your Meural Cloud storage and allow you to send artwork to multiple frames using a single account. A subscription also includes 24/7 customer support, which is otherwise limited to the first 90 days with your Meural Photo Frame. You can learn more about the membership by clicking here.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Netgear launches Meural WiFi Photo Frame with automatic wireless photo album syncing

Posted in Uncategorized

 

Whitney Museum cancels ‘Collective Actions’ exhibit after backlash

26 Aug

The Whitney Museum in New York is cancelling its planned ‘Collective Actions’ exhibit, which was scheduled to begin September 17th, after an online backlash. Farris Wahbeh, the curator, sent out a letter of apology and confirmed that the museum will not show works it acquired at discount prices at a recent ‘See in Black’ charity auction.

‘My sincere hope in collecting them was to build on a historical record of how artists directly engage the important issues of their time. Going forward, we will study and consider further how we can better collect and exhibit artworks and related material that are made and distributed through these channels,’ Wahbeh explains.

The museum attracted criticism for purchasing prints from a recent See in Black auction. 100% of the proceeds from sales went directly to various social justice organizations. The museum paid $ 100 for each print – a deep discount compared to what the artists typically charge, with the intention of placing them in the upcoming ‘Collective Actions’ exhibit. Wahbeh did not initially ask the photographers involved for permission to display their work. Instead, the following message was sent out as revealed by Women Photograph:

Greetings from the Whitney and I hope this message finds you in good health and spirits.

I’m writing to let you know that I have acquired your work…from the project See in Black for the Whitney’s special collections. Your work is incredibly important and speaks to our time, and I’m so honored that the Whitney was able to acquire this work.

Alongside the acquisition, I’m also working on an exhibition comprised largely of works from our Special Collections holdings titled Collective Actions: Artist Interventions in a Time of Change that will feature work by artists involved with collective projects that were organized in response to COVID-19 and Black Lives Matter.

The exhibition will open in September in our 3rd floor exhibition space in the Museum and am excited to share that I plan to include your work as part of this project, work that I believe aptly demonstrates what you have done both individually and as part of a collective.

We are planning to reopen on September 3 following new safety and health protocols and city guidelines. In the meantime, we will install the exhibition so that it will open on September 17.

In recognition and appreciation of your inclusion in the Whitney’s program, I’m happy to note that you will receive an Artist Lifetime Pass which allows you and a guest free entry to the museum as well as other benefits. If you can please provide me with your full contact information (address, email, and phone) to send that Pass to you, I would be most appreciative.

One of the artists involved in See in Black’s print sale took to Twitter to express his outrage:

As of June 2016, the Whitney Museum’s endowment has grown to an estimated $ 308 million. This is why See in Black, and the artists involved, were put off by an Artist Lifetime Pass as compensation. Clearly, the museum has the means to compensate each artist monetarily. See in Black released the following public statement today:

‘We started See in Black as a way to invest in black imagery and permanence through the sale of black–made photography. It has always been our objective to promote ownership, autonomy, and respect for black creatives in an effort to shift the current paradigm upheld by white supremacy.

With that said, the Whitney’s use of the works acquired through the See in Black print sale at significantly discounted prices – the proceeds of which were 100% donated to charity – constitutes unauthorized use of the works to which the artists do not consent and for which the artists were not compensated. Furthermore, See in Black is not affiliated with the Whitney’s exhibition.

The Whitney Museum’s Director recently posted a statement on racial equality to their website. It includes a pledge to ‘re-examine our exhibitions and programs to ensure they continue to address the art and experiences of people of color, especially Black communities.’

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Whitney Museum cancels ‘Collective Actions’ exhibit after backlash

Posted in Uncategorized