RSS
 

Posts Tagged ‘made’

MS Optics has developed the Sonnetar 73mm F1.5 FMC, a lightweight lens made for portraits

30 Oct

MS Optics, a niche optics manufacturer that operates in the basement of Miyazaki san’s Chiba, Japan home, has developed yet another custom lens for Leica M-mount cameras, the Sonnetar 73mm F1.5 FMC.

Inspired by his love for Zeiss’ Sonnar lenses, Miyazaki san created this medium telephoto lens with a unique aesthetic and lightweight design that’s perfect for portraiture. It’s handmade with five elements in four groups and features a multi-coating on every surface for a 97.5% transmission rate.

The lens measures in at 50mm/1.97in in diameter and 56.4mm/2.22in in length, and weighs just 197g/6.95oz. It uses an M49 filter and hood thread size and can focus from infinity to 0.8m/31.5in.

Below are a collection of sample shots graciously provided by Bellamy Hunt of Japan Camera Hunter, shot with the Sonnetar 73mm F1.5 FMC on his Leica M6 with Japan Camera Hunter’s own Streetpan film and filmed with a Canoscan 9000F.

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_4939884495″,”galleryId”:”4939884495″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Bellamy Hunt has also shared a few digital images captured with the Sonnetar 73mm F1.5 FMC.

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_7096994813″,”galleryId”:”7096994813″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Japan Camera Hunter says the lens is still in development and will be available “from the end of October.” As with all MS Optics lenses, numbers are very limited and delivery times are long due to the handmade nature of the lenses.

Japan Camera Hunter is currently selling the Sonnetar 73mm F1.5 FMC for ¥140,000/USD$ 1,252 and says “this is [effectively] a pre-order for the lens with expected delivery around the middle of November.”

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on MS Optics has developed the Sonnetar 73mm F1.5 FMC, a lightweight lens made for portraits

Posted in Uncategorized

 

This lens only existed for a minute and was made from a crystal clear iceberg

24 Oct

French photographer and YouTuber Mathieu Stern is known for his look at rare, vintage glass, but his latest lens might just top it all. While on Iceland’s famous “iceberg beach,” Stern fulfilled his dream of shooting photos and videos with a lens made of ice.

“Shooting photos using an ice lens [has been] my dream for almost 2 years. After some research I saw that almost no one ever tried this crazy idea, mainly because it’s hard as hell to find pure ice, and even harder to get a clear image,” says Stern in the video’s description. “So I had the choice to give up on my idea because it was too hard, or to just level up in the craziness […] If it’s hard to find pure ice in my city, maybe I should go where I could find some 10 000 year old pure ice — Iceland’s famous iceberg beach.”

The night before Stern and his friends were supposed to go to the beach, a “huge” storm went through and took all of the icebergs away from shore. So, they waited a few days and eventually went back three days later at 5am in the morning to get a chunk from one of the icebergs that had made its way to shore.

Stern says it took nearly six hours to create a single working ice lens, after four of them had broken inside of the housing. Every iteration, each of which took 45 minutes to make, was done so with the help of a Japanese cocktail ice ball maker, which Stern had hacked to form the piece of iceberg into a half-sphere.

The housing of the lens he created was 3D-printed, which held the continuously-melting piece of ice in place in front of Stern’s camera. As you could imagine, shooting with the lens was less than ideal. The lens lasted only a minute or so after it was completed and trying to focus as it was melting proved to be a challenge.

According to Stern, no cameras were harmed in the making of the video. As to whether or not he was happy with the result, Stern says “This project is a scientific, artistic and poetic project — I never imagined the result would look like the photos that comes from an ultra modern lens, but I was amazed by the strange beauty of the images I made with the first ever 10,000 year old lens.”

You can read Stern’s detailed account on the creation of the lens and see more of his work on his website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on This lens only existed for a minute and was made from a crystal clear iceberg

Posted in Uncategorized

 

Seagate 14TB IronWolf and IronWolf Pro NAS HDDs are made for creative pros

14 Sep

Seagate has introduced new hard drives for Network Attached Storage (NAS) devices: the 14TB IronWolf and 14TB IronWolf Pro HDDs. The new models offer users access to high-performance hardware alongside management and recovery tools, making it possible to upload and download large amounts of data remotely without stressing about drive failures.

Both the 14TB IronWolf and IronWolf Pro models feature Seagate’s AgileArray technology, which optimizes the HDDs for multi-drive storage systems. Both models also offer up to 256MB cache, but the IronWolf Pro has a longer mean time between failures (MTBF) of 1.2 million hours versus the IronWolf’s 1 million hours.

As well, the 14TB IronWolf comes with a 3-year warranty, whereas the IronWolf Pro has a 5-year warranty. The regular IronWolf model is targeted at small businesses and home use with a 180TB/year workload rating, while the IronWolf Pro is intended for creative professionals, among others, with a 300TB/year workload rating.

The Pro model includes data rescue services, which are an optional addition for the IronWolf model

Both the 14TB IronWolf and IronWolf Pro feature rotational vibration sensors, but differ in support for multi-drive configurations: the IronWolf can be used in devices with up to 8 bays and the IronWolf Pro can be used in devices with up to 24 bays. The Pro model includes data rescue services, which are an optional addition for the IronWolf model.

Seagate’s IronWolf product page doesn’t currently include the 14TB model in its retailer availability search, but Tom’s Hardware reports that the 14TB IronWolf costs $ 530 USD and the 14TB IronWolf Pro costs $ 600 USD.

Via: Seagate

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Seagate 14TB IronWolf and IronWolf Pro NAS HDDs are made for creative pros

Posted in Uncategorized

 

Mirrorless Cameras and Wedding Photography – A Match Made in Heaven?

26 Aug

Can you use mirrorless cameras for wedding photography? My answer is yes you can, absolutely. Why not?

That doesn’t mean mirrorless is for every photographer. I will preface this discussion by saying that your camera is a tool, and it’s all personal taste. No camera is perfect, neither is any photographer. It’s about using what fits.

mirrorless cameras and weddings - two kids at a wedding

I can promise you that many professional wedding photographers will shun the idea of trusting a mirrorless camera for the job of photographing weddings. Some of the best in the world will say that. In turn, some of the best wedding photographers in the world use mirrorless cameras. Some of the naysayers’ concerns are valid, some are ignorant.

Switching over to mirrorless

I will share my experiences and you can use that to help you make an informed decision. I’ve used Fuji mirrorless cameras as my exclusive platform since July of 2014. It started with me needing to upgrade my 7 and 9-year-old Canon 1D series SLRs and being rather unexcited with my upgrade options.

mirrorless cameras - black and white wedding candid photo

My friend at my local camera shop had recently switched from Nikon to Fuji mirrorless and let me play with his camera. It was a rangefinder design and had a lot of resemblance to retro film cameras. It was fun to use and due to its smaller size, it wasn’t a daunting task to take it everywhere. So I picked up a Fuji XT-1 of my own.

This was 2014 when mirrorless technology was still in its infancy and didn’t have the capabilities it does today. It was a rocky 3-4 month learning curve, and some of it was frustrating, especially as I tried to incorporate the Fuji into my professional work.

mirrorless cameras wedding candid photo

Something was different about my work so I stuck with it. When getting used to a different platform, logic should prevail that you have to learn that system, not expect it to work as you think it should. That principle is a hard one to swallow for many. It requires you to think differently, it requires you to change. Sometimes that can do wonders for your inspiration and overall work.

What is different?

When I was getting used to the Fuji system, it seemed that few photographers really understood the system, and we would just learn it together. The image goes straight from the lens to the sensor, there is no mirror inside the camera body. It also uses a contrast phase detection autofocus.

Mirrorless Cameras and Wedding Photography - bride in black and white

In the early days before improved sensors, firmware updates, and faster lenses, the camera hunting for focus was a huge issue. Particularly in low light and in points of lower contrast.

Today, the technology is greatly improved, but there are still advantages an SLR has over mirrorless, particularly for sports and rapid-fire shooters. But anyone who loves the mirrorless system can use it for any kind of professional work. If you learn the system.

What really changed?

Mirrorless Cameras and Wedding Photography - couple getting married

For me, getting used to the mirrorless system changed how I worked and shifted many things about my whole approach. The biggest was using all prime lenses, where before I was using all zoom lenses.

The primes are faster to focus and have better depth of field control from the available Fuji lens lineup. That made me move my feet and become more strategic with my composition. It’s been easier to rely on fewer focal lengths and pick my most versatile lenses.

Mirrorless Cameras and Wedding Photography - couple toasting

I’ve worked closely with the subjects and have become more deliberate with my work. More negative space in my composition and more watching and waiting for the shot, less rapid fire. The tack sharp glass and amazing Fuji color, the electronic viewfinder, and compact size made the system a joy to use.

The things that at first seem to be shortcomings can actually help us become stronger artists through patience and adaptability. My whole point of discussing these past issues is it emphasizes the transition that was required then, and many didn’t make it through. Which is neither right or wrong. The point is that anyone who wants to learn the system has better tools to do so in the present day.

Why or why not to use mirrorless cameras for wedding photography

Mirrorless Cameras and Wedding Photography - first dance b/w

No one can address the future of photography as far as SLR, mirrorless, etc. Nor should that matter. Here are some key facts that may help offer an inside perspective.

Battery life isn’t as long as SLR cameras so spares are needed. You can disable the live electronic viewfinder and switch to optical which helps.

Most mirrorless wedding photographers use two active bodies. You can use a harness or wear one around your neck with your most used lens, and have another camera at your hip with a side holster – just as an example. There’s something more deliberate about primes, and less of a clinical look.

Mirrorless Cameras and Wedding Photography - dance and kiss

There are limitations with TTL flash and mirrorless cameras. The options are to work with that and use manual, which I always have anyway, or not use flash. Which is not always an option.

Pixel peeping and stressing over crop sensor (APS-C)

NOTE: Sony does make full-frame mirrorless bodies if it bothers you that much, or you can stick with your DSLR.

Those people stressing over the smaller sensor make no sense to me. Only other photographers notice noise or will pick an image apart for technical imperfections.

Mirrorless Cameras and Wedding Photography

What about capturing a decisive moment full of emotion? If the images well-composed and exposed, no client will notice or care about things pixel peepers do. Most who insist they need full frame can’t give a proper explanation why. “Oh, the pictures are better.” Pffft.

Use the tool you feel comfortable with. If the good outweighs the quirks you’ve gotten used to, it’s a win. There are many large prints out there shot on crop sensors and mirrorless cameras.

Clients might think you look unprofessional with a mirrorless camera

Two guys walk into a bar, flex their muscles back and forth, and the only lady in the place starts talking to a simple businessman minding his own business.

Mirrorless Cameras and Wedding Photography

If it takes the biggest, loudest, or camera with a specific image to command respect as a photographer, they’re lacking something. Never once has a wedding guest or couple cared about my gear. It’s all about what you can do with it. This would be a ridiculous reason not to go mirrorless. Be secure in who you are as a pro.

You can be less intrusive or conspicuous

Being less intrusive – that has value for me. You can blend in with guests and not be a spectacle.

With a documentary approach, that helps me maintain a low profile, and I’m seldom noticed. Being able to work closer gives you an advantage in that regard. With the smaller camera, it feels less clumsy and doesn’t stand out as much to guests and the couple.

Mirrorless Cameras and Wedding Photography

When you work closer to the subjects, you feel in your soul what is going on at that moment, and it’s less likely that you’ll have your shot blocked. Again, it is less a clinical feeling.

It’s also easier on the body, particularly the shoulders or neck, your back, etc. When you hear about other wedding photographers being sore the day after a wedding, and all you can do is shrug your shoulders, you might be a mirrorless shooter.

Getting used to the mirrorless platform before using it for a wedding

It’s only responsible to be well versed with your equipment, and know its strengths and weaknesses in different areas before using it for a no do-over occasional like a wedding.

Mirrorless Cameras and Wedding Photography

The best way to get used to a new platform, body, or lens is to do some street photography. It’s a very psychological thing to have confidence in your equipment and know its operation well enough to fully trust it. Not doing so sets you up for failure and the clients stand to suffer.

Weddings are demanding and fast-paced, full of decisive moments, and you have to deal with constant lighting and setting changes. It pays to think and act swiftly and keep calm. Street photography is great field training as it is also decisive and fast-paced, and you have to look for the mood or setting you want within time constraints.

Mirrorless Cameras and Wedding Photography

Mirrorless Cameras and Wedding Photography

Plus, you’re also dealing with textures, colors, depth, dimensions, all the things that help make a great photo. Street photography is a great way for you to become one with your gear.

Conclusion

Whether or not mirrorless cameras are for you is a personal choice. But, don’t let anyone tell you that you can’t use them for weddings, or worry about the wrong things.

The post Mirrorless Cameras and Wedding Photography – A Match Made in Heaven? appeared first on Digital Photography School.


Digital Photography School

 
Comments Off on Mirrorless Cameras and Wedding Photography – A Match Made in Heaven?

Posted in Photography

 

PinBox is a DIY 120 format pinhole camera made from cardboard and an acid-etched aperture

07 Jul

Not all Kickstarters need to be overly-ambitious projects with goals reaching six figures. Sometimes, they can be humble, affordable, and downright fun. Case in point is PinBox, a DIY pinhole camera from the Hamm Camera Company.

The PinBox is a do-it-yourself 120 format 6×6 pinhole camera designed specifically to teach you how to make your own.

This is the second crowdfunding effort from Hamm Camera Company. The first was a Kickstarter for NuBox 1, a modular box camera that blew away its funding goal and started shipping out March 2018.

The PinBox kit, which is still available as a ‘super early bird’ special for $ 20, comes with pre-cut sections of cardboard for the frame of the camera, four film winding keys (two flat and two raised) and a precision-made acid etched aperture disk.

PinBox has a focal length of 30mm and a variable aperture, depending on the disk you choose from. Hamm Camera Company suggests going with the F120 or F200 aperture disks, but says it’ll have ‘a whole range of apertures to choose form in the backer survey’ for ‘about’ $ 6 a piece and available in sets at a discount.

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_4569060864″,”galleryId”:”4569060864″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Similar to the NuBox 1, the PinBox is meant to be tinkered with and altered. In Hamm Camera Company’s own words:

Our unique design changes the playing field of conventional cardboard pinhole camera. Our approach is to create a camera from cardboard that you can rapidly iterate. Want to double your focal length? Go for it.

Each kit comes with a digital PDF with layout and instructions so you can tweak and adjust your PinBox as you see fit. All photographs currently show the PinBox camera as plain cardboard, but the Kickstarter notes the team is still working on various finishes, including color options such as red, blue, yellow, grey and maybe more.

PinBox is set to ship ‘around the end of August 2018.’ Once the early bird specials are gone, it’ll cost you $ 27 for a complete PinBox kit, as well as an additional $ 7 for shipping in the United States and $ 14 for international shipping.

To find out more details and to pre-order your PinBOx, head on over to the Kickstarter campaign.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on PinBox is a DIY 120 format pinhole camera made from cardboard and an acid-etched aperture

Posted in Uncategorized

 

5 Common Camera Setting Mistakes Made by Newbie Photographers

01 Jun

Photography is a process of constant learning, so it’s only natural to make mistakes along the way. But with a little bit of advice from those who have been there already, fledgling photographers can avoid a few common camera setting mistakes and focus on bigger and better things. Here are a few tips and tricks I learned early on that will help you get stuck into quality image making.

1 – Leaving image stabilization on when using a tripod

Image stabilization is a handy device that can reduce camera shake and improve image quality when it’s used properly. When activated, image stabilization counteracts slight movements of the camera to help reduce blur in your photos. It can be so effective that cameras and lenses equipped with the system allow you to use a shutter speed of between three and five stops slower than cameras without the feature.

This makes for sharper images in lower light conditions. Sounds great right? Well yes, but not all the time. In fact, when image stabilization is used with a tripod, it can sometimes be more of a hindrance than a help.

If your camera is already set up on a tripod, it should be steady enough by itself. In this case, with the image stabilization left on, the system may try to compensate for minuscule vibrations that wouldn’t otherwise have an effect on the image, increasing blur rather than reducing it.

Check your camera or lens user manual to learn how to switch the system off while shooting with a tripod and you’ll get much sharper images. Just don’t forget to turn it on again when you are going to hand-hold the camera.

5 Common Camera Setting Mistakes Made by Newbie Photographers

In this example, you can see the difference in sharpness between the photograph taken with Image Stabilization on and the photograph taken with IS off. Notice that the photograph with IS off is sharper, with greater contrast.

2 – Using the wrong autofocus mode

When I started out in photography, I remember struggling to properly focus on a subject in my frame, often leaving the camera to select a point at random and hoping for the best. At the time, I didn’t realize the importance of different autofocus modes.

Autofocus offers several different modes which you can select. These are One-Shot AF (Canon)/AF-S (Nikon), AI Servo AF (Canon)/AF-C (Nikon), and final AI Focus (Canon) and AF-A (Nikon).

Probably the most commonly used focus mode is the One-Shot/Single-Servo option. It is the best choice for stationary subjects and serves as the standard setting on your camera. For this setting, the autofocus system achieves focus and then locks that setting in until the shutter is actuated. Once locked, you are assured that your subject will be sharply focused.

AI Servo/AF-C, on the other hand, focuses the lens continuously, which makes it ideal for tracking a moving subject. In this focus mode, the camera will let you take a picture at any time, even if the subject isn’t in focus. This mode is the best choice when you have a moving subject like children, animals, shooting sports, birds, etc.

5 Common Camera Setting Mistakes Made by Newbie Photographers

You can change your focus mode in the quick control panel (this shows the Canon options).

Many cameras also offer a third autofocus mode: AI Focus (Canon) or AF-A (Nikon). This mode attempts to automatically detect whether the subject is stationary or moving and sets the focus mode depending on the situation. However, AI Focus isn’t as reliable as the other two dedicated settings, so it’s best to deliberately select between One-Shot/AF-S or AI Servo/AF-C where possible.

 

5 Common Camera Setting Mistakes Made by Newbie Photographers

AI Servo/AF-C focus mode is ideal for photographing moving subjects.

3 – Not shooting in RAW format

For much of my early photography, I shot in jpeg. It was a familiar file format, so I just went with it. Only later did I discovered what I was missing out on. JPEG files are processed by the camera. That means that while settings like color temperature and exposure are set based on your camera settings, the camera will process the image to adjust blacks, contrast, brightness, noise reduction and sharpening. The file will then be compressed into a JPEG.

But because the image has been edited, compressed and then saved as a JPEG, information in the original photograph gets discarded and cannot be recovered. This limits how much editing you can do with the image in post-production.

Advantages of RAW format

RAW files, on the other hand, are uncompressed and unprocessed. Although they come out looking flatter and darker than JPEG images, they retain all the information recorded in the original image. This allows for a lot more flexibility in post-production, allowing you to take full control over adjustments that you want to apply to a photograph.

Shooting in JPEG can be useful for happy-snaps or circumstances where output doesn’t need to be as higher quality. Otherwise, for professional-grade imagery, you want to shoot in camera RAW. And if you aren’t sure, it is possible to shoot both at the same time – just make sure you have an extra CF card or two on hand.

5 Common Camera Setting Mistakes Made by Newbie Photographers

You can see that the unedited, uncompressed RAW image is a lot flatter than the JPEG because it retains all the information of the original shot. Only after processing will the RAW image match or surpass the look of the JPG.

4 – Always shooting in automatic mode

Automatic exposure mode means that the shutter speed, aperture and ISO are set automatically by the camera for a given situation, leaving you to depress the shutter button and move onto the next shot. But what if you want to take more control over your images?

The biggest advantage of shooting in manual mode (or shutter/aperture priority mode) over automatic is creative control. Plus, the camera doesn’t always get the algorithm for exposure right, so you can end up with underexposed or overexposed images.

Choose a semi-automatic mode instead

You don’t have to shoot fully manual to take better control of your images either. Aperture and Shutter Priority modes allow you to select and adjust either your aperture or shutter speed while the camera compensates to give you the right exposure.

5 Common Camera Setting Mistakes Made by Newbie Photographers

Auto shooting mode.

By using Aperture Priority, you have much more control over the depth of field in your image, dictating how much of the image is in sharp focus. This is helpful for many genres from portraiture to landscape photography, changing the dynamic of your images depending on the situation and how deep you want your photographs to look.

As for using Shutter Priority, being able to take control of the motion in an image allows for a lot more creative leeway. Motion blur has long been used to make images more dynamic. Think waterfalls with smooth flowing water and time-lapse cityscapes, as well as intentional camera movement.

While Automatic exposure mode is useful and often effective, relying only on Auto is allowing your creative photographic potential go to waste. Experimenting with shooting in full Manual or Shutter or Aperture Priority Mode means that you can truly get to know your camera and exploit its artistic possibilities.

5 – Not backing up files

We have a saying in Australia; “She’ll be right”. The term asserts that whatever is wrong will right itself with time. It’s both an optimistic and an apathetic outlook, and when it comes to photography, it can be the start of a spiral into digital file oblivion. I’m talking about backing up files.

Okay, so it isn’t technically an in-camera setting mistake, but photography has an enormous output of content that needs to be maintained so that it is as fresh as the day it was created.

From day one, “she’ll be right” just doesn’t cut it. If you only have one copy of your images stored on a hard drive, and that hard drive fails, (as they often do) then you’ll completely lose all your work. Forever! The easy solution is to have a second or even third copy of your images stored somewhere else, either on an external hard drive or cloud storage service.

Make the investment now and you’ll thank yourself later.

5 Common Camera Setting Mistakes Made by Newbie Photographers

An old favorite, this image is backed up on two separate hard drives!

Conclusion

Starting out in photography can sometimes seem like a daunting task – there’s so much to learn! But photographers, for the most part, are a friendly bunch. We’re happy to pass on the tips and tricks we’ve learned along the way.

By doing your research, there are plenty of ways to dig into photography, avoiding common mistakes, and delve into the world of photography with confidence!

The post 5 Common Camera Setting Mistakes Made by Newbie Photographers appeared first on Digital Photography School.


Digital Photography School

 
Comments Off on 5 Common Camera Setting Mistakes Made by Newbie Photographers

Posted in Photography

 

Leaked Panasonic firmware update is made official

24 May

Panasonic had been planning on a May 30th announcement and release of firmware updates for its GH5, GH5S and G9 models, only to have that plan foiled by a leak of the announcement in Japan today. So while you can’t download the actual firmware updates themselves until next week, here’s a high-level look at what you can expect from the new software.

Autofocus performance is said to be improved on all three models for both stills and video shooting along with an improvement of the quality and performance of sound recording during video. For the G9 and GH5, the image stabilizer has been tweaked, and there have been some refinements of the high-resolution mode for the flagship G9.

Unfortunately, the web pages with all of the nitty gritty details for each camera (see the links in the press release below) aren’t yet live, so we can’t comment on what exactly the ‘New Functions’ and ‘Other Improvements’ will be for each model. That said, we’re certainly looking forward to seeing how effective these AF enhancements will be when they land next week.

Firmware Update Service for DC-GH5, DC-GH5S, DC-G9 To Enhance Performance and Add New Functions

Newark, NJ (May 23, 2018) – Panasonic is pleased to announce new firmware updates for the DC-GH5 (Firmware Version 2.3), DC-GH5S (Firmware Version 1.1) and DC-G9 (Firmware Version 1.1) to further enhance their performance and usability. The firmware will be available on May 30, 2018.

The new firmware includes following upgrades:

LUMIX DC-GH5 Firmware Ver.2.3

  1. Improvement of AF performance
  2. Improvement of Body I.S. (Image Stabilizer) performance
  3. Improvement of sound recording performance
  4. New functions5. Other improvements

LUMIX DC-GH5S Firmware Ver.1.1

  1. Improvement of AF performance
  2. Improvement of sound recording performance
  3. New functions
  4. Other Improvements

LUMIX DC-G9 Firmware Ver.1.1

  1. Improvement of AF performance
  2. Improvement of Body I.S. (Image Stabilizer) performance
  3. Improvement of High Resolution Mode
  4. Improvement of sound recording performance
  5. New functions
  6. Other improvements

The new firmware programs will be available at LUMIX Customer Support Site on May 30, 2018 at: http://av.jpn.support.panasonic.com/support/global/cs/dsc/download/index.html


The details of each firmware programs will also be available at the following pages:

LUMIX DC-GH5 Firmware Ver.2.3: http://www.panasonic.com/global/consumer/lumix/gh5_firmware.html

LUMIX DC-GH5S Firmware Ver.1.1: http://www.panasonic.com/global/consumer/lumix/gh5s_firmware.html

LUMIX DC-G9 Firmware Ver.1.1: http://www.panasonic.com/global/consumer/lumix/g9_firmware.html

*Specifications are subject to change without notice

To learn more about Panasonic’s line of LUMIX Digital Cameras and other consumer electronic products please visit www.shop.panasonic.com and www.lumixlounge.com. You can also follow Panasonic on Twitter (@mypanasonicNA) and Facebook.

About Panasonic Consumer Electronics Company

Based in Newark, NJ, Panasonic Consumer Electronics Company is a division of Panasonic Corporation of North America, the principal North American subsidiary of Panasonic Corporation. The company offers a wide range of consumer solutions in the U.S. including LUMIX Digital Cameras, Camcorders, Blu-ray players, Home Audio, Technics, Cordless Phones, Home Appliances, Beauty, Grooming, Wellness and Personal Care products and more. Panasonic was featured in Fortune Magazine’s 2016 ranking of 50 companies that are changing the world and doing well by doing good. Specifically cited were its smart and sustainable technologies, including its contributions to smart cities and the electric vehicle revolution.

Follow Press Updates for Panasonic Consumer Products:

Internet – http://us.panasonic.com/news

Facebook – http://www.facebook.com/panasonicusaconsumerpress

Instagram – http://www.instagram.com/panasonicusa_consumer_press

Press Resource Contacts:

Panasonic North America Corp. Consumer Press consumer: press@us.panasonic.com

Blair Riley (Porter Novelli): blair.riley@porternovelli.com

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Leaked Panasonic firmware update is made official

Posted in Uncategorized

 

This 7.3-gigapixel panorama ‘timelapse’ of London is made from 6,240 D850 pictures

18 May

Photographer Henry Stuart has created a 24-hour panoramic timelapse image of London that combines 6,240 raw photographs to form a picture that contains over 7 billion pixels.

Captured through a Nikon D850 and AF-S Nikkor 300mm F2.8 lens using a robotic mount by Nikon-owned robotics company Mark Roberts Motion Control (MRMC), the 155° view presents the city in an incredible amount of detail, with Nikon claiming that you can read signs up to 5 miles away from where the image was captured.

The full frame
A fully zoomed-in frame from the center of the picture above

The Twenty Four Hour London project was taken on by Visualise—a company of virtual reality filmmakers—in partnership with Nikon UK and MRMC. The camera was supported and moved by MRMC’s Ulti-Head robotic camera mount, which allowed Stuart to repeat the exact shooting position—to pixel level, according to the release —for 260 shots per hour over the course of the 24-hour sequence.

Once processed and stitched together, the resulting image allows viewers to pick the time of day and to zoom into the image to see the details of distant buildings—and even people relaxing inside their apartments!

The concept was a commission for Lenstore, a UK vision-care company, to promote eye health. To see the full 7 gigapixel ‘timelapse’ for yourself, and explore London in all its glory, head over to the 24 Hour London website.

Press Release

World’s first 24-hour Gigapixel time-lapse panorama, captured with the Nikon D850 and MRMC’s robotic Ulti-Head

24 Hour London is a unique collaboration between Lenstore, Nikon, Visualise and the Nikon-owned robotics company MRMC. Together they have created the biggest ever time-lapse of London’s skyline, taken from the roof of Canary Wharf’s One Canada Square.

In total, over 6,240 photos were taken across a 155-degree view over 24 hours, and subsequently stitched together to create an incredibly detailed panorama, and the first gigapixel timelapse of London. This level of detail was achieved by combining a Nikon D850 and AF-S NIKKOR 300mm f/2.8 lens with MRMC’s robotic Ulti-Head to precisely repeat the same pattern of detailed photos 260 times an hour for 24 hours. The finished product allows you to see London change colours across the hours, from sunrise to sunset, with all the shades the capital has to offer in between.

Commenting on the collaboration, Jeremy Gilbert, Marketing Director for Nikon Northern Europe said:

We’re thrilled to be involved with this unique project. The Nikon D850 captured London in incredible detail in challenging conditions. Finding the best combination of camera, lens and precise motion-control was essential for this project and we are proud to have been integral to its success.

The project was shot by Henry Stuart from Visualise, he had the following to say:

Shooting gigapixel photos is hard – we have been shooting them for the Olympics, the World Cup, for events and places all around the globe. Each panorama is so large it needs specially built computers to process it. In this case, we had to build a special server system and network all of the workstations in our studio to the content so that we could stitch five of the photos at a time.

To capture a photo like this you need a really capable camera – we used the Nikon D850. It has this beautiful big sensor and captures a huge range of light and dark (large dynamic range). This is so important when shooting panoramas where one part of the image is bright, such as towards the sun, and another is dark such as over the Thames. We shot everything on the camera’s ‘RAW’ setting, which keeps loads of extra information in the shots that you would usually lose.

The 24 Hour London ‘Gigalapse’

  • The image is 7.3 Gigapixels (7,300 Megapixels or 7bn pixels), which is over 1000x more powerful than the camera on an iPhone X.
  • The Nikon D850 and Nikon AF-S NIKKOR 300mm f/2.8 lens combination delivered phenomenal detail – you can even read signs which are up to 5 miles away in the photo!
  • The robotic motion control technology using the MRMC Ulti-Head used to create the pinpoint accuracy of images, leading to every single pixel of every point in the panorama being the exact same position as the photos 24 hours earlier.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on This 7.3-gigapixel panorama ‘timelapse’ of London is made from 6,240 D850 pictures

Posted in Uncategorized

 

Google just made the tech behind its ‘portrait mode’ open source

14 Mar

Semantic image segmentation is the task of categorizing every pixel in an image and assigning it a semantic label, such as “road”, “sky”, “person” or “dog”. And now, Google has released its latest image segmentation model as open source, making it available to any developers whose apps could benefit from the technology.

The function can be used in many ways. One recent application in the world of smartphones is the portrait mode on Google’s latest Pixel 2 devices. Here, semantic image segmentation is used to help separate objects in the foreground from the image background. However, you could also imagine applications for optimizing auto exposure or color settings.

This kind of pixel-precise labeling requires a higher localization accuracy than other object recognition technologies, but can also deliver higher-quality results. The good news is that Google has now released its latest image segmentation model, DeepLab-v3+, as open source, making it available to any developers who might want to bake it into their own applications.

Modern semantic image segmentation systems built on top of convolutional neural networks (CNNs) have reached accuracy levels that were hard to imagine even five years ago, thanks to advances in methods, hardware, and datasets. We hope that publicly sharing our system with the community will make it easier for other groups in academia and industry to reproduce and further improve upon state-of-art systems, train models on new datasets, and envision new applications for this technology.

If you are interested in finding out more about DeepLab-v3+, head over to the Google Research Blog for more details.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Google just made the tech behind its ‘portrait mode’ open source

Posted in Uncategorized

 

Avoid These 5 Major Mistakes Made By Travel Photographers

18 Feb

Whether you are traveling abroad or within your own country, there are several mistakes that I’ve seen travel photographers make that hinder the process of making memorable photos.

Five Major Mistakes Made By Travel Photographers

Mistake #1: Not being aware of cultural sensitivities and laws

When you travel to another country it’s easy to forget that the people there may see certain things differently than you. For example, in China, you will see signs up in temples asking you not to take photos. So it should be fairly obvious that doing so may cause offense.

Others are not so obvious. Did you know that in Spain the law prohibits photographers from taking photos of people in public without permission unless they are taking part in a cultural event such as a festival? That’s right, Spain is not a great place to be a street photographer (although that doesn’t stop people from doing it).

Unless you know this, you probably think taking candid photos of people in Spain is perfectly okay (as it is in most other places). Once you understand the attitude (and the law) towards photographing people in Spain, you can adjust your behavior to fit in with local expectations and behavior.

If you want to create a street photo of somebody, it’s best to stop them and ask for permission. That way you protect yourself and (added bonus!) keep out of trouble with the police.

Avoid These 5 Major Mistakes Made By Travel Photographers

I made this street portrait in Cadiz, Spain after asking the street vendor if I could take his photo. If I had tried to take a photo without him noticing it would have been illegal, and if he had called the police I would have been on the wrong side of the law.

Some countries have laws forbidding the photography of certain buildings, like airports. Did you know that photographers have been arrested, jailed, and accused of spying in Greece for photographing an airshow at a military base? If you’re going to Greece it’s a good idea to know which buildings are out of bounds for photographers. Make sure you’re aware of any legal restrictions in your country of travel.

Mistake #2: Being disrespectful to local people

When you travel somewhere new, especially somewhere that is exotic to you, it’s easy to treat people as if they were laid out, like colorful extras in a movie scene, for you to take photos of. That is not true, and it’s disrespectful and unkind to act as if it is. Imagine how you would feel if somebody from another country came and tried to take photos as you went about your daily life, without consideration for you and your feelings.

It seems to me that a big part of the problem is when people travel through other countries without interacting with locals in anything other than a commercial context, such as renting a hotel room or eating in a restaurant. Sometimes this is down to language – it’s hard to strike up a conversation in China if you don’t speak Chinese, for example.

But your travels (and life in general) can become a lot more interesting if you are open to non-commercial experiences with local people. Try having conversations with people about their hopes and dreams, what they do for a living, how they like living in their town and similar topics. You’ll gain a deeper understanding and appreciation of the places you’re traveling through when you do.

Avoid These 5 Major Mistakes Made By Travel Photographers

A Spanish friend of mine invited me to see a farm owned by a member of her family. I would never have gotten to see the farm or make this photo if we didn’t know each other.

Language study is an excellent way to meet local people. I have many good friends in Spain and South America that I met online through websites aimed to help people learn other languages. I’ve met most of them in person and learned a lot about their culture and countries in the process.

Mistake #3: Not putting safety first

Another mistake I’ve seen photographers make is forgetting to take care of their personal security or failing to take appropriate precautions to guard their gear against theft.

Most photographers travel to most places without any security problems, but there is always the potential for something to go wrong, especially if you don’t put much thought into your personal safety and the security of your camera and computer equipment. Some countries are safe, others can be dangerous, so make sure you do your research beforehand and take any appropriate precautions.

A good travel insurance policy that covers your gear (check the fine print) will help give you peace of mind if the worse does happen.

Mistake #4: Taking too much gear

We’ve all seen the type of photographer that walks around with a large dSLR camera and telephoto lens, perhaps even two, swinging from their side.

At the other extreme are photographers who travel with just one camera and one lens. When I worked at EOS magazine we published an article about a photographer who traveled to India with one camera and a single 50mm lens. He made some beautiful images so the approach worked for him.

Avoid These 5 Major Mistakes Made By Travel Photographers

During a recent trip to China, I calculated afterward that I had used my 35mm lens for 73% of the photos, including the one above. That tells me that I probably could have taken just that lens and still enjoyed a very productive journey.

There’s nothing wrong with taking lots of gear, especially if it works for you. Professionals often take lots of lenses so they know they are covered for just about any situation they may encounter. But there are a couple of things worth considering.

  • The first is that a large camera and lens combo is an obvious target for theft. Smaller cameras attract less attention and don’t look as expensive.
  • The other consideration is creative. If you have too much gear it’s heavy to carry around and you can waste time trying to decide which lens/camera combination to use.

The key is to think in advance about the subject matter you intend to photograph and what gear you’ll need for it. If you are into long exposure photography, for example, then you’re going to need a tripod, cable release and neutral density filters.

If you are photographing people, you need to decide what lens or lenses you are going to use for portraits. If you are photographing local architecture, you will probably need a good wide-angle lens. If you are going to walk around all day taking street photos, a small camera and lens are much less tiring than a large DSLR with a telephoto zoom.

You get the idea. Ultimately, you need to find the right balance between taking enough gear to meet your needs and taking too much. Also, if security is a concern, you may want to consider leaving your more expensive gear at home.

Mistake #5: Not doing enough research

If there’s one mistake that links all the others, it’s this one – not doing enough research. It’s important because it makes you aware of any local laws or cultural sensitivities you need to know (mistake #1).

As part of your research, you may get in touch with local people (mistake #2) who can give you advice or help you gain access to places or events you would never know about otherwise. Some photographers go even further and work with a fixer – somebody who introduces you to other people, translates if necessary, and acts as a bridge between you and the local culture.

Research alerts you to any security considerations (mistake #3). It helps you decide what gear you need to take, and avoid overload caused by taking too much equipment (mistake #4).

In other words, doing your research is a key part of avoiding the mistakes that many travel photographers make.

Avoid These 5 Major Mistakes Made By Travel Photographers

Research also helps you find interesting places to photograph, such as this ancient fishing village in north Devon.

Conclusion

These mistakes are based on my observations of other photographers while traveling. But what mistakes have you seen other photographers make? What mistakes have you made yourself? I’m looking forward to hearing your responses in the comments section below.


The Candid Portrait

If you’d like to learn more about street and travel photography then please check out my popular ebook popular ebook The Creative Portrait.

The post Avoid These 5 Major Mistakes Made By Travel Photographers by Andrew S. Gibson appeared first on Digital Photography School.


Digital Photography School

 
Comments Off on Avoid These 5 Major Mistakes Made By Travel Photographers

Posted in Photography