RSS
 

Posts Tagged ‘increased’

CamRanger 2 brings faster speeds, increased compatibility and more

03 Dec

When launched in 2013, the original CamRanger was one of the first devices that let you wirelessly control a DSLR via a smartphone phone app. Since then the company launched the CamRanger mini which mainly focused on offering CamRanger capability in a smaller package.

Now the CamRanger 2 has been released and the updated version is larger than the original but supports more camera models, is faster and comes with additional features.

The original CamRanger could be used with Canon and Nikon DSLRs. Compatibility has now been expanded to Sony Fujifilm mirrorless models, opening up new customer groups to the device. A full list of compatible cameras can be found on the CamRanger website.

There are now also a new standard tripod mount that opens up new attachment options and a for multiple camera attachment options and a SD/SDHC/SDXC memory card slot which should be useful for use with cameras with only a single card slot.

Despite a larger capacity rechargeable battery (3300mAh vs 1800mAh on the original), according to CamRanger battery life has decreased from approximately six to five hours, though.

On the plus side the new model now supports 5Ghz wireless networking in addition to the 2.4Ghz of the original. The range has been doubled from 250 feet to 500 feet (152m) as well.

New features include a ‘quick RAW’ viewing mode which uses an embedded JPG-image for faster reviewing, advanced image rating, video viewing and downloading, saving to SD-card, editing, croppind and more.

For more information head over to the CamRanger website where you’ll also be able to order the device for $ 350.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on CamRanger 2 brings faster speeds, increased compatibility and more

Posted in Uncategorized

 

Canon 1D X Mark III: Includes IBIS, Increased Resolution, and More

23 Sep

The post Canon 1D X Mark III: Includes IBIS, Increased Resolution, and More appeared first on Digital Photography School. It was authored by Jaymes Dempsey.

Canon 1D X Mark III: Includes IBIS, Increased Resolution, and More

The Canon 1D X Mark III may be the last of its kind, but it won’t go down without a fight.

Information has leaked regarding the Canon flagship camera, predicting a 2020 release. This follows on the heels of Nikon’s D6 announcement and its claim that the D6 will be Nikon’s “most advanced DSLR to date.”

The Canon 1D X series and the Nikon D6 series have been longtime competitors, aimed at professional photographers in need of rugged, high-performing camera bodies. Hence, it’s no surprise that the 1D X Mark III should come out in 2020, most likely in time for the Summer Olympics in Tokyo.

The leak also suggests that the Canon 1D X Mark III will have in-body image stabilization (IBIS), a feature traditionally offered by mirrorless models but kept out of DSLRs. This will be appreciated by low-light shooters who need to eke out every bit of stability they can get.

The Canon 1D X Mark III is also said to feature significantly increased resolution “for an EOS-1 series camera.” Note that Canon’s EOS-1 line is short on resolution but high on autofocus capabilities and shooting speed, which explains why the 1D X Mark II tops out at 20.2 megapixels, despite its ‘flagship’ label.

What would count as significant?

My guess would be a jump in the 4-megapixel range, to put the 1D X Mark III at 24 megapixels. But it could be less, considering the low bar for 1D X resolution.

Apparently, the Canon flagship will also include 6K video (without a crop) and an upgraded DIGIC processor, as well as dual CFExpress card slots.

As of now, the 1D X Mark III is looking on par with the Nikon D6, which is rumored to drop in 2020.

Both cameras will undoubtedly be pricey; the Canon 1D X Mark II retails at $ 5500 USD, and the Nikon D5 sits at nearly $ 6000.

But for the professional action photographer, the cameras will undoubtedly be worth the cost.

Are you looking forward to the Canon 1D X Mark III announcement? What specs are you hoping to see? Share your thoughts in the comments!

The post Canon 1D X Mark III: Includes IBIS, Increased Resolution, and More appeared first on Digital Photography School. It was authored by Jaymes Dempsey.


Digital Photography School

 
Comments Off on Canon 1D X Mark III: Includes IBIS, Increased Resolution, and More

Posted in Photography

 

GoPro Plus now offers unlimited cloud storage and increased accessory discounts

31 Jan

GoPro has given a boost to its Plus subscription service. From now on the service offers unlimited cloud storage space for photos and videos to its subscribers. Previously users could upload unlimited photos but there was a 35-hour limit for video footage.

The service is specifically useful for users of WiFi-enabled GoPro cameras, such as the Hero5, Hero6 and Hero7 models, who can now automatically upload all captured footage to the cloud, without the need for any manual data transfer to a computer or other device first.

In addition to the lifted storage limit, the discount on GoPro accessories has also been increased for Plus subscribers. It is now 50% off most mounts and other accessories, compared to 20% previously. What hasn’t changed is the monthly subscription rate at $ 5 which makes the service a pretty enticing option for GoPro power users. There’s also a 30 day free trial period for the service if you’re interested in trying it out first.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on GoPro Plus now offers unlimited cloud storage and increased accessory discounts

Posted in Uncategorized

 

DJI addresses alleged corruption scandal that reportedly increased product prices by 20%

19 Jan

DJI Technology, China’s largest drone manufacturer, is looking at a substantial financial loss in the midst of ongoing investigations wherein 45 current and former employees are facing allegations of corruption.

According to a report from Yicai Global, more than 100 individuals are involved in an alleged widespread corruption scandal for falsely increasing the prices of parts and materials used to make DJI drones.

The report says 26 people allegedly involved in the scandal ‘are from the research and development department, as well as the procurement division.’ Another 19 individuals work in other various departments including administration, design, factories and sales. 16 people have been reported to authorities regarding the allegations.

In a statement to DroneDJ, DJI said:

‘We hold our employees to the highest ethical standards and take any violation of our code of ethics very seriously. During a recent investigation, DJI itself found some employees inflated the cost of parts and materials for certain products for personal financial gain. We took swift action to address this issue, fired the bad actors, and contacted law enforcement officials. We continue to investigate the situation and are cooperating fully with law enforcement’s investigation.’

DJI is facing losses of more than CNY1 billion (approximately $ 147.6 million USD), according to Yicai Global’s estimates. It is believed DJI products suffered from a 20% price increase in 2018 due to the alleged widespread corruption within the supply chain.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DJI addresses alleged corruption scandal that reportedly increased product prices by 20%

Posted in Uncategorized

 

Canon interview: ‘increased competition allows us to level-up’

18 Mar
Canon executives (L-R) Yoshiyuki Mizoguchi, Group Executive of Imaging Communications Business Group, Go Tokura, Chief Executive Officer of Canon’s Image Communications Products Operation, and Naoya Kaneda, Advisory Director and Group Executive of Canon’s Optical Business Group.

At this year’s CP+ show in Yokohama, we sat down with senior executives from several major manufacturers, including Canon. Topics covered during our conversation with Go Tokura, Yoshiyuki Mizoguchi and Naoya Kaneda included Canon’s ambitions for high-end mirrorless cameras, and the importance of responding to changing definitions of image capture from the smartphone generation.

Answers from the three interviewees have been combined, and this interview (which was conducted through an interpreter) has been edited for clarity and flow.


How important is it for Canon to add higher-end mirrorless products to your lineup?

At Canon we have what’s called a ‘full lineup strategy’. This means that we want to satisfy all of the demands in the market, so we have mirrorless and also DSLR, which combined makes an EOS hierarchy. We want to fill the gaps to satisfy customer demands across the board.

The new M50 is an entry-level model, because that’s where the high-volume sales are. We want to establish ourselves in this market, and then move forward [from there]. In accordance with the full lineup strategy, we will be tackling [the mid-range and high-end mirrorless market] going forward.

The EOS M50 offers 4K video and Dual Pixel CMOS AF, but not at the same time. Is there a technical reason for this limitation?

With the EOS 5D Mark IV, we do offer 4K video and Dual Pixel CMOS autofocus, so technically it is feasible. But given the position of the M50 in the lineup, we can’t include all of the features available in a product like the 5D IV. Given the position of the product, we wanted to achieve the optimal balance [of features] in a camera in that range. We’ve optimized the M50 as best we can [for its market position], and within those parameters, the combination of 4K video and Dual Pixel CMOS autofocus was not possible.

Canon’s new EOS M50 offers limited 4K video capability, making it the first of Canon’s mirrorless cameras to go beyond HD video capture.

Another manufacturer that we spoke to estimated that Canon would have a full-frame mirrorless camera within a year. Is that realistic?

That would be nice, wouldn’t it?

The Tokyo Olympics in 2020 is coming up – when we look at photographers shooting with Canon at Tokyo in two years time, what will we see?

The Tokyo Olympics is a very important opportunity for us. If we look at the professional camera market, we would like to introduce a professional model at that time. Having said that, we take reliability very seriously. So when we talk about [creating] a model for the Olympics, we’re not just talking about performance. We’re also want to make sure that we can achieve the same level of reliability that we’ve always delivered [in our professional DSLRs].

The Tokyo Olympics is a very important opportunity for us

We also want to raise Canon’s presence overall, with camera products and also events and services. We have been instructed [by our senior leadership] to maximize the opportunity!

Canon’s gear room at the 2016 Olympics in Rio. Major sporting events like this have always been a major focus for Canon, and have often served as showcases for new professional cameras and lenses. The next Olympic Games will be held in Tokyo, in 2020 and is sure to be a major event for Canon.

In your opinion, what is the most important quality for an entry-level camera?

We are always looking for speed, ease of use, and maximum resolution. We’re also thinking about how we can deliver better image quality than a smartphone. So it’s about really focusing on speed, ease of use and image quality. Small size and weight comes into [the calculation] as well, and also the GUI.

Looking beyond the entry-level class towards cameras aimed at high-end amateurs like the 5D class, those customers need even better image quality, and they also want to take more control over operation. They want to expand, and express their creativity. Reliability also comes into play.

The Canon EOS 5D Mark IV offers both 4K video capture and Dual Pixel autofocus – not a combination available lower down in Canon’s ILC lineup (for now).

Do you think that 4K video is a more important feature at the entry-level end of the market, or the enthusiast / professional segment?

We believe that 4K video is important for all market segments, and all users. Given that we have a range of products, we always have to think about how best [to implement 4K] in that class of camera. And you can do more with 4K video in a higher-end camera than in an entry-level model.

Why is that?

The cost required to introduce [features like 4K] into cameras dictates the kind of features that we can introduce [in products of different classes]. 4K is important to offer in all market segments, and in the M50 we’ve achieved 4K at 25 fps, and that’s the best we can do at this time. We can’t introduce all of the features [in an entry-level camera] that we could in a higher-end model. Another point is that consumption of 4K footage in terms of devices to view 4K video – the penetration of those devices in the market, and their adoption, was a little faster than we expected.

In the past, you’ve said that you won’t introduce a high-end mirrorless product until there would be no compromises compared to DSLR technology. Are we getting close?

In the EOS hierarchy we have cameras from entry-level to professional with different features. When it comes to mirrorless cameras, we have entry-level models, and we’ve just about started on the mid-range class. What that tells you is that Canon is confident about mirrorless technology within this range of products.

We still believe there’s work to be done before we can achieve the level of satisfaction that our users are looking for before they could confidently move from DSLR to mirrorless

But if you look at the enthusiast and high-end product class, in terms of both autofocus and viewfinder [experience], we still believe there’s some work to be done before we can achieve the level of satisfaction that our users are looking for before they could confidently move from DSLR to mirrorless. That’s where we are right now. We’re still on the path to development.

So far, the EOS M5 is the nearest thing Canon has made to a high-end mirrorless camera. The M5 is a great product, but a far cry from some of the industry-changing cameras that Canon has been responsible for in the past.

Having said that, it’s not like we don’t have the components required to create a mirrorless model that would be on a par with DSLR models. For example Dual Pixel CMOS autofocus, lenses that can focus quickly, and optical components like the EVF. We have the technology required to create a camera that would be satisfactory. It’s just a matter of combining [those components] together. So you can look forward to our developments in the future.

There’s still a perception among our readers that Canon is a little conservative. Where is Canon innovating right now?

Rather than some of the very novel features that some of our competitors have been introducing, we believe that it’s really important to deliver the basics. Speed, ease of use, and good image quality. Dual Pixel CMOS autofocus is representative of that [philosophy]. It’s not only important for stills photography, but also for video. Only Canon is pursuing this area [of development] right now. We also have Dual Pixel Raw, and we’re looking for new ways of applying [this technology] currently.

Canon’s schematic of its Dual Pixel CMOS AF sensor structure. The top layer illustrates the light-gathering micro-lenses and conventional Bayer-type color filter array. The lower layer shows how each pixel is split into two photo-diodes, left and right, which are colored blue and red respectively. (Note that this does not indicate different color sensitivity.)

With lenses, we introduced the EF 70-300mm [EF70-300mm F4-5.6 IS II USM] zoom lens, and the EF-S 18-135mm [EF-S 18-135mm F3.5-5.6 IS USM] which both have Nano USM focus motors. This makes three focus actuators: ring type, stepping motor and Nano USM. This gives us more options when it comes to optical design. For a super wide lens like the 10-24mm L [EF11-24mm F4L USM] for example, we offer ring-type USM, which provides higher torque. Our optical technology is a strength that we’re proud of.

Maybe Canon lenses don’t look that different to our competitors, but in terms of performance, we’re able to create lenses that are superior

We also have a range of [special] optical materials, and methods to process these materials. If you just look at specs, maybe Canon lenses don’t look that different to our competitors, but in terms of performance, we’re able to create lenses that are superior. It’s also about post-purchase support. Durability, reliability, and the ability to withstand extreme temperatures. Our users are able to enjoy this level of performance and they appreciate that.

We also have a new product – our new Speedlite 470EX-AI flash, for automatic bounce photography. So we believe that we can provide innovation across the system of cameras, lenses and accessories. Our customer base is also diversifying, particularly generations ‘Y’ and ‘Z’. They’re looking for new things. We were just at CES in Las Vegas, where we showed some new concept models. We got a lot of feedback, and we want to turn [the concepts] into a marketable product pretty soon.

When we look at trends in mirrorless technology, we’re considering the technical advancements that are possible.

Clearly, the transition to mirrorless will be a big challenge, technically. When you look ahead to further mirrorless development, are you envisaging a new lens system?

It’s been more than 30 years since we launched our EF lens mount, and we’ve sold more than 130 million EF lenses during that time, so we can’t simply ignore that many lenses in the market. At the same time, when we look at trends in mirrorless technology, we’re considering the technical advancements that are possible. It’s a difficult question to answer, but maybe let your imagination suggest some possibilities!

The move from FD to EF in 1987 was bold but also controversial given the legacy of FD lenses and the lack of compatibility between the two platforms. Do you think that situation will happen again?

That’s a difficult question to answer. There was a lot of discussion and debate about that shift, in 1987, and we’re going through the same thing now. We want to nurture and support our [existing] EF customers and we’re in discussion about that at the moment.

Canon’s recently-announced EF 85mm F1.4L, showing the electronic contacts which are a defining element of the EF lens system, first introduced more than 30 years ago to replace the all-mechanical FD lens platform.

In 1987, the shift was from a mechanical interface to an electronic interface. That [precluded cross-compatibility]. Despite that shift, the change provided significantly more value for our customers, which is why we went ahead. If it turns out that [the introduction of mirrorless] will create a similar situation, this might be a decision that we would take [again]. But we’re not sure yet.

Because we’re already using an electronic interface, the shift will be more gradual [than it was in 1987] so [we would better able to] maintain compatibility.

Looking ahead, what is Canon’s main priority?

We want to improve our product lineup, including lenses. We just released an entry-level model (the EOS M50), and because young people are really getting into photography more actively, the entry-level segment is one that we always need to make sure to tackle.

The entire concept of capturing images has changed over the past couple of years

When it comes to maintaining market share and ensuring growth, what is the most difficult challenge that Canon is facing?

We’ve been producing cameras for a long time, but the entire concept of capturing images has changed over the past couple of years, and we need to engage with this new style of capturing images. The first stage is our new concept cameras. It’s important for us to relax and expand our concepts of image capture.

This is of the several concept cameras that Canon has been showing this year – an ‘intelligent compact camera’ designed to automatically capture images, and intelligently learn about the kinds of pictures you want to take.

Now, maybe the camera can be beside you, or maybe even away from you, and still capture the image that you’re looking for. We need to have the technologies to respond to [these new ways of capturing images] in the way that Canon should.

For a very long time, Canon and Nikon dominated the professional market. There’s a lot more competition these days. Is more competition good for Canon?

More players means more activity in the industry, which is a positive thing. Having said that, of course it’s tough.

Does this pressure generate better ideas? More innovation?

Very much so, and it goes both ways. For all players, to be stimulated by increased competition allows us to level-up across the board.

Is it more important for camera manufacturers to design cameras that behave more like smartphones, or that they communicate the benefits of a dedicated camera to smartphone photographers?

I think we have to do both. We have to continue to evolve the traditional benefits that a camera can provide, and at the same time we have to consider the diversification of image capturing tools, including smartphones, and what they have to offer. Our mission is to pursue both approaches.


Editor’s note:

This interview was the fourth time I’ve spoken to Mr. Tokura in recent years, who has become more senior within Canon since we first met back in 2014. Our conversation at CP+ covered some old ground (the perception among some industry-watchers that Canon is a little conservative, increased competition from the likes of Sony, etc.) but this year I really got the sense from talking to him that Mr. Tokura and his team will have some pretty interesting products to show us in the not too distant future.

We know from previous conversations with both Mr. Tokura and his boss Mr. Maeda that increasing the speed of product development has been a priority at Canon in recent years. Since then, we’ve seen some solid refreshes at the top and middle of Canon’s DSLR lineup (along with some truly excellent new lenses), but a lot of the company’s energy seems to have been directed towards the lower-end, especially within the EOS M lineup. This focus on the entry-level segment of the camera market (‘where the sales are’, as Mr. Tokura said in our interview) makes sense, but I’ve expressed my own disappointment in the past about such a ‘slow and steady’ approach in the face of increasingly fast-moving competition.

Canon has the technology for high-end mirrorless – it just has to put all the pieces together

It’s been a long time coming, but in this interview Mr. Tokura came pretty close to at least hinting that higher-end, perhaps even full-frame mirrorless is imminent – and maybe even within the next 12 months. As he said, Canon has the technology – it just has to put all the pieces together.

Possibly even more exciting is the possibility of a professional model to come by 2020. Back in 2016, Mr. Tokura reminded me that Canon likes to launch flagship models in Olympic years, and the fact that the next Olympiad will be held in Tokyo is likely to present an irresistible opportunity. You heard it here first.

Canon has shaken up the photography market several times in the past, and has the potential to do so again.

Speaking of the future, the Canon executives I spoke to at CP+ were very keen to show me the mockups of a range of concept cameras that were first unveiled at this year’s CES show in Las Vegas, in January. While none are finished, marketable products (yet) it’s clear that Canon is keen to explore products that respond to what Mr. Tokura calls ‘a new style of capturing images’.

Canon is sometimes criticized for taking a conservative approach to product development, and in some cases this is true (although it isn’t always a bad thing). It’s important to remember though that Canon has shaken up the photography market several times in the past, and there’s every chance it could do so again.


Previous interviews with Canon executives:

An interview with the heads of Canon’s L lens factory (2017)

CP+ 2017: ‘We want to be number one in the overall ILC market’

CP+ 2015: ‘Every day I’m saying ‘speed up!’

Photokina 2014: Mirrorless ‘in the very near future’

CP+ 2014: ‘We don’t see the smartphone as an enemy’

CP+ 2013: Interview with Canon’s Masaya Maeda

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon interview: ‘increased competition allows us to level-up’

Posted in Uncategorized

 

Astropad 2.0 brings better performance and increased compatibility

04 Aug

Astropad, the app that turns your iPad into a graphics tablet for your Mac, has released its first major update. Astropad 2.0 comes with a range of improvements that allow for a more responsive drawing experience and increased compatibility with Mac software packages. The makers of the app claim the technology is so good that users are starting to replace their Wacom tablets with Astropad.

The new version of Astropad comes with the following improvements:

  • Astropad’s LIQUID technology, which allows for very smooth operation at 60 fps, has been upgraded to run three times faster and with significantly reduced pixelation.
  • The new velocity control analyzes network conditions at a very high frequency to find the optimal balance between image quality and latency.
  • Astropad 2.0 uses 3x less CPU power and 4x less memory than before, extending the iPad’s battery life.
  • The pressure curve has been refined for a more natural drawing feel.
  • Ehanced software capability means that the app now supports panning and zooming gestures across more software applications, including: Affinity Designer, Affinity Photo, Art Rage, Clip Studio Paint, Lightroom, Mischief, Autodesk Sketchbook.
  • The cursor can now be auto-hidden while drawing.
  • The user interface has been updated for a sleeker look and feel.

The update to Astropad 2.0 is free for existing users. Anyone else can purchase the app now for $ 29.99 on the Apple App Store. Astropad 2.0 works on all iPads with iOS 8 and all Macs with 10.9 (Mavericks) or later.


Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Astropad 2.0 brings better performance and increased compatibility

Posted in Uncategorized

 

Canon’s Q3 financial results show increased profit, decline in ILC sales volume

29 Oct

Canon’s Imaging Systems business has reported its third quarter sales fell by ¥26.5bn ($ 220m), compared to the same time last year. The company blamed a decline in worldwide demand for its interchangeable lens cameras ‘due to market shrinkage,’ with unit sales down 17% year-on-year, despite sales increases in Japan and Europe. Read more

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon’s Q3 financial results show increased profit, decline in ILC sales volume

Posted in Uncategorized

 

Nikon D7200 boasts low-light AF improvements and increased buffer depth

03 Mar

Nikon’s prosumer line gets an update today in the form of the D7200. With a 24.2MP APS-C CMOS sensor it offers a very slight resolution increase over its 24.1MP D7100 predecessor, and like that model it lacks an optical low-pass filter. But the D7200’s primary enhancements include a next-generation 51-point AF module with increased low-light sensitivity, built-in Wi-Fi with NFC and an improved 100-shot buffer depth when shooting JPEGs or Raw files at 6 fps. Read more

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikon D7200 boasts low-light AF improvements and increased buffer depth

Posted in Uncategorized

 

GoPro points to increased costs as it reports deeper losses in financial results

06 Aug

Despite the ubiquity of GoPro’s diminutive ‘action cam’ video solutions, the company has reported a loss of $ 19.8 million for the second quarter following an additional loss of $ 5.1 million from the year prior. GoPro first went public in June of this year, and while shares have dropped a whopping 11-15% following the financial results, everything is not necessarily doom and gloom for the company. Read more

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on GoPro points to increased costs as it reports deeper losses in financial results

Posted in Uncategorized