RSS
 

Pixel Knight TR-332 Review

28 Dec

Pixel Knight TR-332 Review
Video Rating: 4 / 5

 
20 Comments

Posted in Nikon Videos

 

Tags: , , ,

 
 

  1. webdivers1996

    December 28, 2012 at 10:53 am

    yes I have tried and it is actually always on otherwise nothing works…it does something but not 100%…to bad! 🙁

     

  2. John Bodally

    December 28, 2012 at 10:54 am

    Well read up first but i am sure they do work great on 5d i no there is a setting in the tr332 for the 5d you tried that yet?

     

  3. webdivers1996

    December 28, 2012 at 11:29 am

    ok, thanks. I will check YN. Are u sure they work well with 5D mk 2? For some strange reason (???) this camera series seems to have a lot of compatibility probs with not originals accessories…bah!

     

  4. John Bodally

    December 28, 2012 at 11:31 am

    I no there was problems with the mk11 i would get rid mate and get the yn-622c there cheap and are AWSOM. I have done reviews on these also mine work great every time or i am sure there is a setting in the tr332 for mk11?

     

  5. webdivers1996

    December 28, 2012 at 11:34 am

    Hallo John, thanks for the nice review. I use a tr-332 set with my 5d mk II and I can not solve the problems of “half black images” below 1/250 sec. I am driving crazy. I mean, if flash is on ETTL mode and camera on M I can almost done what I want but…when camera and flash are on M…than I can only use shutter speeds faster than 1/250 otherwise I got half black screen. Can you help?

     

  6. John Bodally

    December 28, 2012 at 12:08 pm

    Hi mate try the pixel kings there AWSOM i review them 5 part video 🙂

     

  7. PhotoSuhadolnik

    December 28, 2012 at 12:19 pm

    To buy any Pixel Knight product is absolute waste of your money. Yes it is cheap! But you do not get device you can count on when you need it !!! Bought three of them and no one works more than few days. When you count all the time and money you spend ordering that s**t, you can easly buy original EX 600 RT with transsmiter

     

  8. Saritkhun

    December 28, 2012 at 12:34 pm

    do they work with yongnuo flash units?

     

  9. John Bodally

    December 28, 2012 at 1:22 pm

    video now up mate flash help cheers john

     

  10. John Bodally

    December 28, 2012 at 1:55 pm

    Check my new flash video

     

  11. Angel Salazar

    December 28, 2012 at 2:18 pm

    I been having rpoblems with my tr 331 nikon version. It under exposes or over exposes. I resorted back to my commander mode trigger.

     

  12. TheOriginalJoeBloggs

    December 28, 2012 at 2:32 pm

    true
    

     

  13. John Bodally

    December 28, 2012 at 3:20 pm

    Hi mate yes the yn560 works on the tr-332 if flash. And i got mine of ebay just go there good look with flash photography you will love it cheers john

     

  14. ThePhotographybysimo

    December 28, 2012 at 3:25 pm

    Good morning John thank you for the quick reply have you a link for the cheap ones my plan is to have at least one ettl and the rest manual as I want to start doing off camera stuff thanks once again

     

  15. John Bodally

    December 28, 2012 at 3:29 pm

    Hi there ill try them later but if so they will only work in manual mode so if thats all u need them for go for the cheap onces for around 30 pounds for 2 i got them has i have a 580ex and can use ettl with them

     

  16. ThePhotographybysimo

    December 28, 2012 at 4:23 pm

    Hi John great videos do these work with the Yn flash as I’m looking to get my hands on some 560.s thanks and keep up the good work

     

  17. nmotiontravelguide

    December 28, 2012 at 5:08 pm

    Heart video man. Lots of great info. I’m excited to unbox my kings

     

  18. John Bodally

    December 28, 2012 at 5:43 pm

    Hi mate well hss is on all the time but if you put your flash into manual and also the triggers then go above your sync speed and if its working there will be no black line 🙂

     

  19. carlos00926

    December 28, 2012 at 6:34 pm

    I have (2) 580ex and (2) 430ex. From what I’ve read if you dont have the ver II you cant change the settings from the transmitter but have to manually go to the flash unit. My question is, how can I verify that the hypersync is indeed working? I assume you put the transmitter on manual mode at 100% power.

    Im not sure if I have the version 1, 2 or 3.

     

  20. Angel Salazar

    December 28, 2012 at 7:04 pm

    They suck to operate but the only affordable option to control the trigger w/o having to bring down the umbrella and stand