RSS
 

Posts Tagged ‘monitor/recorder’

Sony a7S III to get 4K/60p ProRes Raw capture over HDMI with Atomos’ Ninja V monitor/recorder

28 Jul

To coincide with the announcement of Sony’s a7S III, Atomos has announced it will release a firmware update for its Ninja V recorder/monitor that will enable it to record 4K/60p ProRes Raw video over HDMI.

The 16-bit linear Raw video output of the a7S III is sent via HDMI to the Ninja V recorder, which then compresses and records the video as 12-bit ProRes Raw at up to 4K/60p. The Ninja V will also be able to record the a7S III’s 10-bit 4:2:2 HDMI video output as 10-bit 4:2:2 Log or Rec.709 video at up to 4K/60p in ProRes or DNx codecs.

Atomos has shared the following video from Phillip Bloom, shot on the Alpha 7S III and Ninja V in ProRes RAW:

Atomos expects the firmware update to be available in September of this year.

Press release:

Atomos to record 4Kp60 ProRes RAW over HDMI from Sony’s Alpha 7S III

Melbourne, Australia – July 28, 2020 – Atomos are today announcing RAW recording at up to 4Kp60 via HDMI from Sony’s new Alpha 7S III (ILCE-7SM3) full-frame mirrorless camera to the Ninja V HDR monitor-recorder.

The Alpha 7S III has a state-of-the-art CMOS image sensor and the Ninja V can record its full dynamic range in Apple ProRes RAW for maximum detail and latitude in post-production. The RAW files are optimal for HDR finishing, or for greater flexibility in SDR (Rec.709), giving stunning results in either. Images are recorded directly to affordable, reliable AtomX SSDmini or other compatible SSD drives for quick transfer to your editing system.

Unrestricted RAW recording
RAW recording with the Ninja V from the Alpha 7S III is only limited by your imagination. The combination will record ProRes RAW video for as long as you have disk space on your SSD and power for the camera and recorder. The active cooling employed means that internal record time limitations can be bypassed making a perfect setup for performances and long interviews. Optionally, RAW video can also be captured on the Ninja V at the same time as compressed video is recorded internally to memory card on the Alpha 7S III, providing several workflow options and a useful backup

Making low light RAW video a reality
Alpha 7S III low light performance is especially impressive, with the data from the camera’s large photosites making recording RAW in dim conditions a practical option. The Alpha 7S III also has 5-axis optical image stabilisation that is available while shooting RAW video, allowing for amazingly stable and detailed handheld RAW shots.

16-bit Linear RAW perfectly captured as 12-bit Log RAW
The data-rich 16-bit linear RAW output of the Alpha 7S III is compressed and recorded in the Ninja V as 12-bit ProRes RAW at up to 4Kp60. The result is a high quality ProRes RAW file that combines the superb visual quality of the Alpha 7S III with the workflow advantages of RAW and the incredible real-time performance of ProRes. One key benefit, especially in low light, is that the ProRes RAW files allow you to take fine control of how noise reduction and sharpening is applied to images, tuning these precisely for each shot.

A defined standard
Atomos believes ProRes RAW is the new standard for RAW video capture, which is supported by an ever growing number of cameras outputting RAW over HDMI to the Ninja V. The format gives filmmakers enormous latitude when adjusting the look of their images and extending brightness and shadow detail, making it ideal for HDR workflows. Both ProRes RAW, and the higher bandwidth, less compressed ProRes RAW HQ are supported. Manageable file sizes speed up and simplify file transfer, media management, and archiving. ProRes RAW is supported in Final Cut Pro X, Adobe Premiere and Grass Valley Edius, along with a collection of other apps including ASSIMILATE SCRATCH, Colorfront and FilmLight Baselight.

10-bit 4kp60 Apple ProRes or Avid DNx for extended recording
For the first time in a mirrorless camera from Sony there is also a 10-bit 422 HDMI video output option available. The Ninja V and other current Atomos monitor-recorders can record this as 10-bit 422 Log or Rec.709 video at up to 4Kp60 into production ready ProRes or DNx codecs. These provide long record times and practical data rates when the additional flexibility of RAW is not required. This is ideal for situations where the camera needs to integrate into an established post workflow, or a fast turnaround is needed.

HDR monitoring perfection
The accurate 5” 1000nit HDR high brightness display of the Ninja V allows users to view the Alpha 7S III RAW signal in HDR in a choice of HLG and PQ (HDR10) formats or view natively in Sony’s S-Log profile and used with LUTs. The monitor offers touchscreen access to tools like waveform, magnification and peaking so users can check focus and make adjustments to get the perfect HDR or SDR shot.

Launch film from filmmaker Philip Bloom
Renowned filmmaker Philip Bloom has shot a short film titled ‘The Paddleboarder’ to test the ProRes RAW capabilities of the Alpha 7S III with the Ninja V. Shot on the river Thames in just one day it clearly demonstrates just how filmic the RAW images look. In his time with the camera he has also shot ProRes RAW in various lighting conditions including near darkness.

He said: “Sony’s Alpha 7S III is incredibly powerful and does pretty much everything I need from a camera. Having the ability to record RAW over HDMI to the Atomos Ninja V is the icing on the cake. Not only can I record at full quality 10-bit 4K internally to the camera’s memory cards, I can simultaneously record 12-bit ProRes RAW to an SSD which gives me more flexibility to grade and bypass things like the in-camera sharpening and noise reduction. This is especially invaluable when shooting at very high ISO where working with RAW allows me to adjust the noise in post processing with much more precision.”

Atomos and ProRes RAW
Jeromy Young, Atomos CEO, said: “What Sony have done with the Alpha 7S III for RAW recording to the Ninja V is truly amazing. I’m delighted that together we are able to bring this first Sony’s Alpha™ into the Atomos RAW ecosystem. Sony’s engineers have delivered an amazing quality RAW over HDMI output to the Ninja V that will open up countless creative opportunities. The detail, dynamic range and especially low light performance is outstanding in RAW. The stable operation and long RAW record times that the Ninja V brings to the Alpha 7S III make it a brilliant tool for almost any production.”

Ninja V users will receive a free AtomOS update to enable RAW recording over HDMI from the Alpha 7S III. This is set to be available in September 2020.

To learn more about the Ninja V and Sony’s Alpha 7S III visit www.atomos.com

VIEW: See the launch film The Paddleboarder” shot on the Alpha 7S III and Ninja V in ProRes RAW by DP Philip Bloom here

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Sony a7S III to get 4K/60p ProRes Raw capture over HDMI with Atomos’ Ninja V monitor/recorder

Posted in Uncategorized

 

Atomos announces Shinobi SDI monitor, Shogun 7 monitor/recorder and a Ninja V SDI module

06 Apr

Atomos has been on a roll this past week with the introduction of three new video products ahead of NAB 2019: the Shinobi SDI, Shogun 7 and AtomX SDI module. Below we’ve summarized the news of each product.

Shinobi SDI

The Atomos Shinobi SDI is a new, super-lightweight 5-inch 4K HDR monitor that offers HD-SDI and 4K HDMI connectivity. The monitor features a compact, durable frame that offers a 1000nit display with a pixel density of 427 pixels-per-inch (PPI) behind an anti-reflection, anti-fingerprint screen. The monitor comes factory calibrated with the option to calibrate the screen on-demand.

Atomos says this monitor was built as a means of addressing one of its customers most-demanded products, a stand-alone SDI monitor. The monitor operates on AtomOS 10 and offers a number of features, including focus peaking, 4:1 / 2:1 / 1:1 zoom, customizable zebras, false color, frame guides, broadcast markers and a suite of scope options that include waveform, RGB parade, vector scope and audio level meters.

The Shinobi SDI weighs in at 226g / 7.8oz and is available for pre-order at B&H for $ 499 USD and is expected to ship at the end of April 2019.

Shogun 7

Also new is the Atomos Shogun 7, a new seven-inch HDR monitor, recorder and switcher. The 1,500nit daylight-viewable display features a new 1920 by 1200 panel with a 1,000,000:1 contrast ratio and 15+ stops of dynamic range.

Atomos says the ‘screen uses a unique combination of advanced LED and LCD technologies which together offer deeper, better blacks than rival OLED screens, but with the much higher brightness and vivid color performance of top-end LCDs.’

A new 360 zone backlight inside the Shogun 7 is controlled by the Dynamic AtomHDR engine that enables the panel to show ultra-wide color with 105% of the DCI-P3 colorspace covered. Atomos has also teamed up with Dolby to create Dolby Vision HDR ‘live,’ which makes it possible to capture HDR footage on the Shogun 7 and display it on an HDR-capable TV or monitor over HDMI.

On the recording front, the Shogun 7 can record video up to 5.7K / 80p, 4K / 120p or 2K / 240p in RAW/Log or HLG/PQ over SDI/HDMI. Video is stored directly to an AtomX SSDmini or comparable SATA SSD drives. Recording options include Apple ProRes RAW and ProRes, Avid DNx and Adobe CinemaDNG RAW codecs.

The Shogun 7 can also be used with an optional balanced XLR breakout cable that can record up to 12 channels of 24/96 digital audio from HDMI or SDI connections. Monitoring of the audio can be done using the onboard 3.5mm headphone jack.

The Shogun 7 is available for pre-order at B&H for $ 1,499 USD and is expected to ship June 2019.

AtomX SDI module for Ninja V

The third and final product Atomos has announced is the AtomX SDI module for Ninja V. As its name suggests, this add-on module adds the ability to record and output video over 12G-SDI at up to 4K / 60p.

Atomos says it’s been one of the most-requested products from video professionals around the globe. The module is approximately the size of an NP-type battery and attaches to the rear of the Nija V via the modular expansion port. It adds two user-configurable 12G-SDI connections and full-sized 75 Ohm BNC connectors.

Apple ProRes and Avid DNx file formats are used when recording over single or dual-link SDI uses, and shooting is supported in Log, HLG and Rec.709 gammas.

The AtomX SDI module is available for pre-order at B&H for $ 199 and is expected to ship in May 2019.

For more information on all these products and more, head over to Atomos’ website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Atomos announces Shinobi SDI monitor, Shogun 7 monitor/recorder and a Ninja V SDI module

Posted in Uncategorized

 

Blackmagic Designs promises scopes for 4K Video Assist monitor/recorder

25 Apr

Blackmagic designs has announced a variety of professional ‘scopes’ will be added to its Video Assist 4K monitor/recorder. In the meantime, the company has also added support for ten extra languages.

Firmware v2.5, due in June, will add waveform, RGB parade, vectorscope and histogram options to the device. These can either be displayed on a black background, overlaid on top of the video feed or shown as picture-in-picture frames.

Waveform, RGB parade and vectorscope are tools used by video professionals for quickly assessing exposure and color. These are powerful tools, each of which gives a different way of understanding the brightness and color makeup of the footage, to help set up and monitor your video as you capture it.

‘Scopes’ being added to the Video Assist 4K include this RGB parade, showing the spacial distribution of per-channel brightness values within the scene, helping with exposure and color balance.

We were recently impressed when the Panasonic DC-GH5 became the first camera we’ve reviewed to provide in-camera scopes, but the addition of these functions to the Video Assist mean that they’re now accessible to anyone shooting with a camera offering HDMI output.

Update v2.4, available today, adds support for ten additional languages, meaning the device can now be operated in: Chinese, English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish and Turkish.

The latest firmware can be downloaded from the Blackmagic Designs website.


Press Release:

Blackmagic Design Announces New Professional Scopes and Multi Lingual Support for Video Assist

New software update supports 10 additional languages, plus a beta demonstration of full professional scopes for professional monitoring.

NAB 2017, Las Vegas, Nevada – April 24, 2017 – Blackmagic Design today announced the immediate availability of Blackmagic Video Assist 2.4 update which adds support for multi-lingual support for 10 separate languages. This means customers can now use Video Assist in their native language. This update is available now as a free update for all Blackmagic Video Assist and Blackmagic Video Assist 4K customers.

Also demonstrated at the NAB 2017 show are powerful new professional scopes operating on the Blackmagic Video Assist 4K model, including waveform, RGB parade, vectorscope and histogram that can be viewed full screen for accurately evaluating video signals passing through Blackmagic Video Assist 4K. These scopes are shown as a development preview and will also be available in June as a software update free of charge for all Blackmagic Video Assist 4K customers.

Customers can see a beta demonstration of the new language support and preview the new professional scopes on Blackmagic Video Assist 4K at the Blackmagic Design NAB 2017 booth at #SL216.

The new scopes make the Blackmagic Video Assist 4K model perfect for live production monitoring, as portable test scope for broadcasters, and even for balancing color when color grading using the RGB parade scope.

The new localized Video Assist adds interface support for Chinese, English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish and Turkish. This broad language support now makes it easier for more customers to use Video Assist anywhere in the world.

“Video Assist has become an indispensable part of everyone’s production kit,” said Grant Petty, Blackmagic Design CEO. “It’s the perfect portable field monitor and recorder. The addition of full blown professional scopes makes it even more exciting and useful for customers. Plus, the new multi-lingual interface will make it easier for non-English speaking customers to use it!”

Availability and Price

Blackmagic Video Assist 2.4 update is available now from the Blackmagic Design website free of charge for all current Blackmagic Video Assist and Blackmagic Video Assist 4K customers. Blackmagic Video Assist 2.5, which will support scopes on the Blackmagic Video Assist 4K model will be available in June.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Blackmagic Designs promises scopes for 4K Video Assist monitor/recorder

Posted in Uncategorized