Mesh « 360Photography

RSS

Posts Tagged ‘Mesh’

Steel Mesh Kraken Sunken Off British Virgin Islands to Create an Artificial Reef

23 Oct

[ By SA Rogers in Destinations & Sights & Travel. ]

Perched atop the Kodiak Queen, a former WW2-era Navy fuel barge, this 80-foot ‘Kraken’ now serves as the base of an artificial reef and marine research station on the ocean floor near the British Virgin Islands. The project, entitled BVI Art Reef, accomplishes a range of goals all at once: saving a decorated ship from destruction, transplanting coral to a new site in the hopes that it will flourish, creating an epic dive site and underwater art gallery, and providing a new habitat for marine life.

Photographer Owen Buggy documented the process, from the early stages of building the massive sea monster to sinking it in April 2017 to checking out the results a few months later. Sunken off the coast of the island Virgin Gorda with the help of tugboats and helicopters, the installation is already helping to rehabilitate heavily over-fished marine populations. Filmmaker Rob Sorrenti also got some great footage, presented as a documentary entitled ‘The Kodiak Queen,’ which is due for release in early 2018.

“This is the story of learning from past lessons and coming together to create something greater; rooted in joy and fueled by the power of play,” reads the BVI website. “This is the story of a group of friends from around the world who fell in love with the BVIs… and turned a weapon of war into a platform for unity – and a catalyst for new growth. This charitable kick-off in the British Virgin Islands combine art, ocean conservation, world history, marine science and economy… to solve a series of challenges in the BVIs by asking: how can we use play and collaboration to install permanent solutions that boost the local economy, secure the prosperity of these pristine islands for generations to come?”

“Our solution: a fantasy art eco-dive and ocean conservation site that puts the BVIs on the map as having one of the most unique and meaningful dive sites in the world… and one of the most forward-thinking approaches to creative problem solving that secures the education of its youth, and the health and prosperity of this island nation.”

Get updates on the project at the BVI Art Reef Facebook page.

[ By SA Rogers in Destinations & Sights & Travel. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]

WebUrbanist

Comments Off

Posted in Creativity

Ghost Ship: Wire Mesh Sails Make an Eerie Sight in Italy’s Bay of Sapri

24 Aug

[ By SA Rogers in Art & Sculpture & Craft. ]

A ghostly ship sails through the Bay of Sapri in Southern Italy, just translucent enough for onlookers to doubt whether they’re imagining it, its silhouette obscured by a jumble of rectilinear columns. The latest wire mesh masterwork by artist Edoardo Tresoldi, ‘Locus’ is a collaboration with Italian musician IOSONOUNCANE, bringing sculpture and music together in a public performance enjoyed by a crowd gathered on the nearby shore.

The musician debuted his unreleased composition during the installation, presented as part of Sapri’s Derive Festival, an experimental art, music and poetry project curated by Antonio Oriente. The combination of the ship’s visuals, the lighting, the music and the setting truly made it a one-of-a-kind experience, with the sounds amplified by the water.

“Sapri Bay become sone of the characterizing elements of the event, acquiring a temporal and performative dimension,” states the Derive website (translated from Italian. “Collaboration blends different contemporary languages, redefining the relationship between audience and artist in a kind of hic et nunc [here and now] unrepeatable.”

Edoardo Tresoldi is known for his eerily beautiful wire compositions, which are typically architectural in nature, recreating entire classical and historic structures like echoes of churches that fell into ruins centuries ago and palatial interior installations augmented by flying birds.

[ By SA Rogers in Art & Sculpture & Craft. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]

WebUrbanist

Comments Off

Posted in Creativity

Ghostly Garden: Classical Wire Mesh Architecture Haunts Abu Dhabi

20 May

[ By SA Rogers in Art & Sculpture & Craft. ]

Seeming like a ghostly image of structures long gone overlaid onto the current reality, these wire mesh architectural creations arch over 75,000 square feet of event space in Abu Dhabi. The way the mesh shifts between transparency and opacity depending on how it’s layered, paired with its grid pattern, gives it the look of a light-based projection, yet it’s physical and three-dimensional, crafted in full-scale skeletal form to suggest structures rather than bring them to fruition.

Artist Edoardo Tresoldi previously resurrected an ancient church in Puglia, Italy that had been destroyed by earthquakes in the 13th century right where it once stood, allowing visitors to get a sense of how the structure interacts with the site before and after its demise. This time, Tresoldi sculpts a whole series of architectural sculptures, along with flying birds and cubes that hang suspended in midair.

The Abu Dhabi installation acts as a decorative tableau for a royal event attended by 1,900 guests from all over the Middle East, and took three months to complete, representing the artist’s first time creating a large installation for an indoor space. After the event, some of the structures will be moved and reassembled in public places across the UAE capital, including museums, parks and universities.

Many of these forms are reminiscent of previous Tresoldi works, including an archway used on a fashion runway, and a caged bird. Tresoldi creates figurative wire mesh sculptures, as well. You can see the evolution of his process at his Behance profile.

[ By SA Rogers in Art & Sculpture & Craft. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]

WebUrbanist

Comments Off

Posted in Creativity

Free to Forge: Open Source 3D-Printed Metal Mesh Furniture

23 May

[ By WebUrbanist in Gadgets & Geekery & Technology. ]

3d printed metal bench

Completed by a robot programmed to extrude material in midair, the world’s first fully 3D-printed metal furniture shows off a fresh range of possibilities for creating intricate structures and complex shapes on demand.

dragon bench design details

Employing Autodesk and an MX3D machine, Dutch designer Joris Laarman created the Dragon Bench (above) and other pieces (below) that illustrate the rich potential of metals using additives to harden as they are deployed.

mx3d robot machine

With this “industrial robot [and] advanced welding machine we are able to print with metals, such as steel, stainless steel, aluminium, bronze or copper without the need for support-structures. By adding small amounts of molten metal at a time, we are able to print lines [horizontal, vertical and spiral] in mid air. The combination robot/welding is driven by different types of software that work closely together. This will eventually have to end up in a user friendly interface that allows the user to print directly from CAD.”

3d printed exhibit design

3d open source maker

3d printed chair series

Within this series, currently on display at Friedman Benda gallery in New York City, are a set of organic (also 3D-printed) polyurethane chairs and table. Puzzle-piece parts are made first, costing around $ 50 – the components are assembled into a finished whole. The plans for these are also going to be made available online as free resources for anyone who wants to make their own – an easier, less material-dependent entry point for someone without access to their own metal-printing robot (at least as of yet).

mx3d demo example

bench

The potential of this technology extends well beyond stand-alone objects – components for cars, buildings or other infrastructure could be generated using the same machines and techniques. Meanwhile, when it comes one-off custom works of either art or design, three-dimensional complexity is suddenly a much lower hurdle to overcome.