RSS
 

Posts Tagged ‘macOS’

Canon brings its macOS EOS Webcam Utility out of beta and updates Windows version to 1.1

13 Nov

Canon has announced a full production version (1.0) of its EOS Webcam Utility software for macOS and a version 1.1 update for Windows computers.

Less than a week after Nikon announced its webcam utility was out of beta, Canon has done the same. Canon says its beta program has been downloaded more than one million times around the world and with this new update comes new support for a total of 43 compatible EOS interchangeable lens and PowerShot cameras. Below is a complete list of the cameras currently supported:

  • EOS 1DX Mark III
  • EOS 1DX Mark II
  • EOS 1DX
  • EOS 1D C
  • EOS 5DS R
  • EOS 5DS
  • EOS 5D Mark IV
  • EOS 5D Mark III
  • EOS 5D Mark II
  • EOS 6D
  • EOS 7D Mark II
  • EOS 7D
  • EOS 90D
  • EOS 80D
  • EOS 77D
  • EOS 70D
  • EOS 60D
  • EOS Rebel T8i
  • EOS Rebel T7i
  • EOS Rebel T6s
  • EOS Rebel T6i
  • EOS Rebel T5i
  • EOS Rebel T3i
  • EOS Revel SL3
  • EOS Rebel SL2
  • EOS Rebel SL1
  • EOS Rebel T7
  • EOS Rebel T6
  • EOS Rebel T3
  • EOS Rebel T100
  • EOS R5
  • EOS R6
  • EOS R1
  • EOS R
  • EOS RP
  • EOS M6 Mark II
  • EOS M50 Mark II
  • EOS M50
  • EOS M200
  • PowerShot G5X Mark II
  • PowerShot G7X Mark III
  • PowerShot SX70 HS

Canon has also improved compatibility with third-party videoconferencing and streaming programs. Canon says its EOS Webcam Utility has been tested and confirmed to work with the following programs:

  • Apple Facetime
  • Cisco Webex
  • Discord
  • Facebook Live
  • Facebook Messenger
  • Google Hangouts
  • Google Hangouts Meet
  • Microsoft Teams
  • OBS
  • Skype
  • Slack
  • Streamlabs OBS
  • YouTube Live
  • Zoom

Below are two guides from Canon on how to get started with using your Canon camera as a webcam input on macOS and Windows computers:

Canon says it will ‘continue to lean on customers [and] listen to the market’ to improve the utility going forward. You can download EOS Webcam Utility version 1.0 for macOS and version 1.1 for Windows computer on Canon’s website. If you have questions, comments or complaints, Canon has opened up a new forum specifically for discussing its webcam utility.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon brings its macOS EOS Webcam Utility out of beta and updates Windows version to 1.1

Posted in Uncategorized

 

Nikon brings its Webcam Utility out of beta, adds support for macOS computers

05 Nov

Nikon has released the first non-beta version of its free webcam utility for macOS and Windows computers.

Back in July, Nikon announced it was working on a webcam utility that would turned select Nikon cameras into webcams with compatible videoconferencing and streaming software. In August, they followed through on that promise with the release of a beta utility for Windows 10 users. Nikon confirmed a macOS version was on the way, but that has yet to be seen—until today.

In addition to being the first non-beta version of the app for Windows 10 users, Webcam Utility Software version 1.0.0 is also available for macOS computers.

As with previous versions of the software, all you need is a compatible Nikon camera, a USB cable for plugging the camera into your computer and a videoconferencing or streaming app that supports external webcams, such as Facebook Messenger, Google Meet, Skype, Zoom, OBS and others. Below is a full list of compatible cameras:

  • Z7
  • Z6
  • Z5
  • Z50
  • D6
  • D850
  • D780
  • D500
  • D7500
  • D5600

You can download Nikon’s Webcam Utility Software version 1.0.0 for macOS and Windows 10 computers on Nikon’s website. Additional information and a full list of compatibility notes can also be found on Nikon’s website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikon brings its Webcam Utility out of beta, adds support for macOS computers

Posted in Uncategorized

 

Sony brings its Imaging Edge Webcam utility to macOS, updates Windows version

16 Oct

Sony has announced the release of a macOS version of its Imaging Edge Webcam utility as well as an update for the Windows version.

Back in August, Sony followed in the footsteps of other manufacturers with the announcement of Imaging Edge Webcam, a utility that turned three dozen Sony cameras into webcams without the need of a capture card. At the time, the utility was Windows-only, but it’s now available for macOS.

Much like the Windows version, the macOS version (1.0) makes it easy to turn one of the following Sony camera systems into a dedicated webcam by simply connecting it over USB:

?: E-mount?ILCE-?

  • ILCE-7M2
  • ILCE-7M3
  • ILCE-7RM2
  • ILCE-7RM3
  • ILCE-7RM4
  • ILCE-7S
  • ILCE-7SM2
  • ILCE-7SM3
  • ILCE-9
  • ILCE-9M2
  • ILCE-5100
  • ILCE-6100
  • ILCE-6300
  • ILCE-6400
  • ILCE-6500
  • ILCE-6600

?: A-mount?ILCA-?

  • ILCA-77M2
  • ILCA-99M2
  • ILCA-68

Digital Still Camera?DSC-/Vlog camera)

  • DSC-HX95
  • DSC-HX99
  • DSC-RX0
  • DSC-RX0M2
  • DSC-RX100M4
  • DSC-RX100M5
  • DSC-RX100M5A
  • DSC-RX100M6
  • DSC-RX100M7
  • DSC-RX10M2
  • DSC-RX10M3
  • DSC-RX10M4
  • DSC-RX1RM2
  • DSC-WX700
  • DSC-WX800
  • ZV-1

The Windows version has also received a 1.1 update. No specific changes were mentioned, but it’s safe to assume there were a number of bugs dealt with.

You can download both the macOS (1.0) and Windows (1.1) versions of Imaging Edge Webcam from Sony’s website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Sony brings its Imaging Edge Webcam utility to macOS, updates Windows version

Posted in Uncategorized

 

You can now use select Nikon DSLRs, mirrorless cameras as webcams on macOS

24 Sep

Yesterday, Nikon released a beta version of its Webcam Utility software for macOS. Like the Windows version, released back on August 6, the macOS utility will allow owners of Nikon Z series and DSLR camera owners to use their compatible cameras as webcams with popular livestreaming and video conferencing software via USB.

The macOS version of the Webcam Utility appears to function identically as the Windows version, complete with support for the following cameras: Z7, Z6, Z5, Z50, D6, D850, D780, D500, D7500 and D5600. The process is as simple as installing the utility, plugging in your camera via USB and selecting it as an input source with a compatible livestreaming or video conferencing program, such as Zoom, Google Teams, OBS Studio and others.

You can find out more information on the process at Nikon’s dedicated Webcam Utility page and download the Webcam Utility beta on Nikon’s website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on You can now use select Nikon DSLRs, mirrorless cameras as webcams on macOS

Posted in Uncategorized

 

Olympus releases its OM-D Webcam Beta for macOS computers

27 Aug

Olympus has announced the macOS version of its OM-D Webcam Beta utility is now available. Like the Windows version, released back in June, the macOS version enables select OM-D cameras to be used as webcams with compatible videoconferencing and streaming software over USB.

The utility is free to download from Olympus’ website. Once installed, the process is as simple as plugging one of the compatible Olympus cameras and selecting the OM-D Webcam Beta as an input in the conferencing or streaming program of your choosing. Below is the limited list of compatible cameras:

  • OM-D E-M1X
  • OM-D E-M1 Mark III
  • OM-D E-M1 Mark II
  • OM-D E-M1
  • OM-D E-M5 Mark II

Olympus notes the utility won’t capture audio from your camera, so plan on having another microphone nearby (or just use your computer’s built-in microphone). Olympus also says streaming quality will be lower if there isn’t a memory card inside the camera.

We have contacted Olympus to see if any other cameras will be compatible in the future. You can find out more information and download the utility on Olympus’ website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Olympus releases its OM-D Webcam Beta for macOS computers

Posted in Uncategorized

 

Cascade Pro Webcam can turn more than 100 popular cameras into webcams on macOS

16 Jul

While the likes of Canon, Fujifilm, Panasonic and others have released firmware updates or dedicated apps to turn cameras into webcams, not every camera owner is lucky enough to have their camera’s manufacturer release such utilities. Thankfully, there are third-party developers stepping up to the plate to help bring webcam functionality to many more cameras.

One of the latest attempts is from Cascable, a development team known for making wireless remote, tethering and transferring solutions for iOS and macOS devices. The team’s newest creation is Cascable Pro Webcam, a new macOS app that will turn compatible Canon, Fujifilm, Nikon, Olympus, Panasonic and Sony cameras into a webcam for popular video conferencing and streaming programs.

Over 100 cameras are supported by Cascable Pro Webcam, with some even offering wireless connectivity if the camera has built-in WiFi. Cascable has a full list of compatible cameras on its website. Note that in order for the camera to be supported, it must have a checkmark under the ‘Control & Automation’ column on the linked page.

The highlighted (red) column is what determines whether or not your camera is compatible with Cascade Pro Webcam.

As for the video conferencing and streaming apps it supports, the Cascade team says it’s specifically tested it with Google Chrome, Microsoft Edge, Microsoft Teams, OBS Studio, Quicktime Player, Skype (8.59 or later), Twitch Studio and Zoom (5.0.5 or later).

Cascable Webcam Pro is available to download for free to try out. The free trial doesn’t limit how many times you can use it, but not all features will be available and streams will show an overlay when they last more than five minutes. Cascable Pro Webcam will retail for $ 40, but until July 24, it’s just $ 30 as part of a ‘launch sale.’ You can download the free trial and purchase a license on the Cascable website. You need to be running macOS 10.14.4 or higher.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Cascade Pro Webcam can turn more than 100 popular cameras into webcams on macOS

Posted in Uncategorized

 

Panasonic announces minor firmware updates for 6 cameras, release of macOS streaming utility and more

14 Jul

Panasonic has announced minor firmware updates for half-a-dozen of its G Series mirrorless cameras and announced the upcoming release of new software for Windows and macOS computers that will give its mirrorless cameras the ability to be used as a webcam without the need for a capture card.

The firmware updates are for Panasonic’s GH5, GH5S, G9, G95, G85 and GX9 camera systems. The respective updates improve compatibility with Panasonic’s new Tripod Grip DMW-SHGR1 and add ‘operational stability’ with the LUMIX G VARIO 12–32mm / F3.5–5.6 lens. The new firmware updates will go live on Panasonic’s support page on July 21.

Panasonic has also announced the release of LUMIX Streaming (Beta) for macOS. Like the Windows version released back on June 9, the macOS version allows select Panasonic mirrorless cameras to be used as webcams through a derivative version of Panasonic’s LUMIX Tether utility that removes unnecessary interface elements to create a clean output for using as a webcam feed.

A screenshot of the Windows version of LUMIX Streaming (Beta).

At this time, the LUMIX Streaming (Beta) supports Panasonic’s S1H, S1R, S1, GH5S, GH5 and G9 mirrorless cameras. It requires at least macOS 10.11 (El Capitan), 2GB of RAM for 64-bit systems and 200MB of space. You can download the utility for free on Panasonic’s website.

Beyond the LUMIX Streaming (Beta) for macOS and Windows, Panasonic is also developing LUMIX Webcam Software. Unlike LUMIX Streaming (Beta), which is effectively a tweaked version of its tethering utility, LUMIX Webcam Software ‘[will make] it possible to use an applicable LUMIX camera as a webcam over a USB connection not only for live streaming, but also for video conferencing, etc.’ Panasonic says the software will be compatible with its S1H, S1R, S1, GH5S, GH5, and G9 camera systems, and is due for a September release on Windows and an October release for macOS.

Press release:

Panasonic Announces the Release of Firmware Update Programs for LUMIX G Series Cameras, “LUMIX Streaming (Beta)” for Mac and the Development of “LUMIX Webcam Software” for Windows/Mac

Newark, NJ (July 14, 2020) – Panasonic is pleased to announce the release of firmware update programs for the LUMIX G Series of Digital Single Lens Mirrorless Cameras and software programs “LUMIX Streaming (Beta)” for Mac and the development of “LUMIX Webcam Software” for Win/Mac.

The firmware update programs are for DC-GH5,GH5S, G9, G95, G85 and GX9 to improve compatibility with the new Tripod Grip DMW-SHGR1 and operational stability with LUMIX G VARIO 12-32mm / F3.5-5.6 ASPH. /MEGA O.I.S.(H-FS12032) lens. Meanwhile, “LUMIX Streaming (Beta)” and “LUMIX Webcam Software” enhance work-at-home activities using LUMIX cameras.

1. Firmware update programs for DC-GH5, GH5S, G9, G95, G85 and GX9

Model

Firmware Version

?Tripod grip DMW-SHGR1 can be used.

?Improved operational stability with the Panasonic LUMIX G VARIO 12-32mm / F3.5-5.6 ASPH. /MEGA O.I.S.(H-FS12032)

DC-GH5

Firmware Version 2.7

Yes

Yes

DC-GH5S

Firmware Version 1.6

Yes

DC-G9

Firmware Version 2.2

Yes

Yes

DC- G95

Firmware Version 1.2

Yes

Yes

DC- G85

Firmware Version 1.5

Yes

Yes

DC-GX9

Firmware Version 1.5

Yes

The firmware program will be available at LUMIX Global Customer Support website https://av.jpn.support.panasonic.com/support/global/cs/dsc/ on July 21, 2020.

2. LUMIX Streaming (Beta) for Mac

Followed by the release of “LUMIX Streaming (Beta)” for Windows, the “LUMIX Streaming (Beta)” for Mac has also been released. It is derived from conventional “LUMIX Tether (Ver.1.7)” with an additional display option for the cases where this software is used for live streaming purposes. It may help user convenience in the growing self-streaming opportunities.

As “LUMIX Tether” is a software program originally designed for tethered shooting, GUIs such as a focus area mark as well as control panels are displayed with live view images on the PC monitor during USB tethering. However, these graphic items become a hindrance when the software is used to capture camera view for live streaming. In response to the demands of customers to resolve this issue, LIVE VIEW mode has been added on “LUMIX Streaming (Beta)”. It enables displaying camera view only, making it easy for the separate streaming software to read it. Users can choose to show or hide these graphic items during USB tethering according to the usage purpose.

“LUMIX Streaming (Beta)” is provided as a pre-release version that is currently still under development. Please note that this software is not eligible for operation warranty and customer support.

Compatible models: DC-S1H, DC-S1R, DC-S1, DC-GH5S, DC-GH5, DC-G9

LUMIX Tether for Streaming (Beta) for Mac Operating Environment

OS

Mac OS X 10.11,

Mac macOS 10.12, macOS 10.13, macOS 10.14

*Operation with macOS 10.15 Catalina is under verification but some issues are reported. https://av.jpn.support.panasonic.com/support/global/cs/dsc/info/macos_tether.html

(When to officially support macOS 10.15 Catalina is yet to be fixed.)

CPU

Intel CPU of 1 GHz or higher

Display

1024 x 768 pixels or more

RAM

1GB or more (32bit),2GB or more (64bit)

HDD

Free space of 200 MB or more for installation

Interface

USB 3.0/3.1

LUMIX Tether for Streaming (Beta) web page with download link

https://www.panasonic.com/global/consumer/lumix/lumixtether.html

3. LUMIX Webcam Software

While the “LUMIX Streaming (Beta)” is basically a software for tethered shooting that can also be used to capture camera views for live streaming, the upcoming “LUMIX Webcam Software” makes it possible to use an applicable LUMIX camera as a webcam over a USB connection not only for live streaming, but also for video conferencing, etc.

Compatible models: DC-S1H, DC-S1R, DC-S1, DC-GH5S, DC-GH5, DC-G9, DC-G100 *

Release Date*: End of September (for Windows) / End of October (for Mac), 2020

*The release date of LUMIX Webcam Software for DC-G100 is yet to be decided.

Panasonic is committed to continuous improvement with its LUMIX product line, including the Full-Frame S Series and the Micro Four Thirds G Series, by providing customers with valuable products and services, a part of which are these firmware and software update programs.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Panasonic announces minor firmware updates for 6 cameras, release of macOS streaming utility and more

Posted in Uncategorized

 

You can now use your (compatible) Fujifilm camera as a webcam on macOS

11 Jul

Fujifilm has released its Fujifilm X Webcam utility for macOS, making it possible to use compatible Fujifilm cameras as webcams on Apple computers.

As with the Windows version, the macOS version of Fujifilm X Webcam makes it so you can use the following cameras as webcams in compatible video conferencing and live broadcasting apps when plugged into your Apple computer via USB:

  • GFX 100
  • GFX 50S
  • GFX 50R
  • X-H1
  • X-Pro2
  • X-Pro3
  • X-T2
  • X-T3
  • X-T4

Fuji X Webcam version 1.0.0 is compatible with macOS 10.12 (Sierra) or later and is free to download on Fujifilm’s website. Fujifilm has published a user guide to help you get up and running.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on You can now use your (compatible) Fujifilm camera as a webcam on macOS

Posted in Uncategorized

 

WWDC2020 : A round-up of photo features and updates in iOS 14, iPadOS 14 and macOS Big Sur

24 Jun

Apple’s virtual WWDC keynote yesterday was light on photography-related news, but hidden within the iOS 14 and macOS 11.0 (Big Sur) are a few small updates worth noting.

iOS 14

In iOS 14 the launch time of the stock camera app has been improved and time required between shots has been reduced. Specifically, Apple says ‘you can now shoot photos up to 90% faster (compared to iOS 13.5) at up to 4 frames per second’ and start-up time for the camera app has been improved by 25%.

Additionally, Apple has added a new exposure compensation control that lets you lock an exposure value while separately locking focus on another point — something third-party camera apps have offered for years now. Also new is an updated interface when shooting in Night mode on the iPhone 11 and 11 Pro that provides an overlay using gyroscope information to ensure you stay steady throughout the image capture.

A final small update is a new option within the camera settings that lets you mirror photos captured with the front-facing camera.

Also, although it’s not directly related to photography, Apple has added an option within its accessibility settings to run Shortcuts with a double- or triple-tap on the back of the device. This means you could trigger various photo-related Shortcuts with either of these gestures, such as opening up a third-party camera app with a double-tap and opening up the editing app of your choice with a triple-tap.

You can see all of the latest iOS 14 features on Apple’s iOS 14 ‘New Features’ page.

iPadOS

iPadOS doesn’t put as much emphasis on the capturing of photos as iOS, but Apple didn’t leave it hanging either. In camera mode, Apple has added quick toggles to change video resolution and framerate within the camera app and like iOS, there’s now an option to mirror images captured with the front camera.

The Photos app on iPadOS is redesigned using Apple’s new full-height sidebar, making it easier to navigate between albums, search and more. It’s also possible to add captions to images within the Photos app and Apple has also improved the Memories function, which should better select more relevant photos and videos to highlight.

The image picker has also been redesigned, which should make it easier to find and share or upload images within Safari, Messages, Mail and other third-party apps.

You can find a full rundown of all the new iPadOS 14 features on Apple’s website.

macOS 11.0 (Big Sur)

Aside from the overall user interface changes and a few changes to the Photos app, there aren’t many photo-specific changes within macOS Big Sur. At least not for now.

As much as macOS Big Sur changes things up on the visual side of things, it’s also about laying the groundwork for Apple’s forthcoming computers that will use its own ARM-based architecture. This requires a lot of behind-the-scenes work and programming to ensure apps designed for current computers and CPUs will work with the first computers with Apple’s own chipsets, the first of which Apple CEO Tim Cook says will be out by year’s end.

Apple showcased both Adobe Lightroom CC and Photoshop running on one of its ARM-based developer kit computers and specifically said it’s working with Adobe to make sure Creative Cloud apps will work with the new architecture out of the gate, but we’ve heard similar statements before that took a little longer to come to fruition to be expected (i.e. Photoshop for iPad), so you might want to keep your expectations subdued for the time being.

Still, making the jump from Intel chips to its own is no minor feat for processor-intensive applications such as Lightroom and Photoshop, so any collaboration between Apple and Adobe ahead of future hardware releases is a welcomed sight.

As for the Photos app, Apple has added new video editing capabilities such as adjustments, filters and cropping, as well as improved the Retouch tool, which now uses ‘advanced machine learning to remove blemishes, dust specks, and other objects from photos.’

Like the iPadOS update, Photos for macOS adds improved navigation, the ability to add captions to images and the aforementioned improvements to Memories for more relevant collections.

Wrapping up

Overall, the photo-related updates to iOS, iPadOS and macOS are relatively minor based on the hardware currently available. However, it’s usually the hardware that brings major changes and all of these operating system updates, macOS Big Sur in particular, lay the foundations for future hardware. You can watch the complete keynote on Apple’s YouTube Channel.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on WWDC2020 : A round-up of photo features and updates in iOS 14, iPadOS 14 and macOS Big Sur

Posted in Uncategorized

 

Fujifilm gives X-A7, X-T200 webcam mode via firmware, bringing X Webcam utility to macOS next month

22 Jun

Fujifilm has released firmware updates for its X-17 and X-T200 camera systems that makes it possible to use the mirrorless cameras as webcams without the need for extra software. Additionally, Fujfiilm has announced its X Webcam program will be launched for macOS next month.

Screenshot of the USB webcam option within the Fujifilm menu system.

Firmware version 1.30 for the X-A7 and version 1.10 for the X-T200 adds the option to use the camera as a webcam when connected to a computer via a USB cable. To access this setting, go into the menu, navigate to ‘Connection Setting,’ enter ‘USB Mode’ and plug in the camera to a computer via USB. Once connected, the camera should appear as a camera option on compatible video conferencing and messaging programs, such as Google Meet, Skype and Zoom.

A collection of screenshots showing how cameras should appear as input options for Zoom, Skype and Google Meet.

Fujifilm says this functionality should work on Windows 10 (x64), macOS 10.14 Mojave and macOS 10.15 Catalina. You can download firmware version 1.30 for the X-A7 and version 1.10 for the X-T200 on Fujifilm’s website.

On the topic of macOS, Fujifilm has also announced announced it’s working on bringing its Fujifilm X Webcam utility to macOS. First launched on PC back in May, the utility will allow macOS users to turn their compatible X and GFX cameras into webcams. Fujifilm says the program will be available in mid-July.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm gives X-A7, X-T200 webcam mode via firmware, bringing X Webcam utility to macOS next month

Posted in Uncategorized