Filter system manufacturer Nisi has introduced a new filter holder that allows photographers to rotate two filters independently of each other, in much the same way that Lee’s Tandem operates. The Nisi Switch attaches to the existing 82mm filter holder and provides an additional rotation point so that the forward filter can be twisted separately to filters in the main holder.
The system is designed for those using graduated filters to make tackling mountainous horizons easier and so that graduated filters can be placed at more than a single angle to allow photographers to control different areas of the scene individually.
The Switch is part of the company’s 100mm filter system and will cost around $ 99. Those without the current 82mm filter holder will also need to buy a V6, a V5Pro or a V5 kit as well. These kits start at $ 169. For more information see the Nisi website.
A new Kickstarter project wants to provide photographers with a retro storage solution for their SD and microSD cards. Called VNTG8, this project takes old 8mm film canisters and transforms them into SD card holders via a foam insert. This foam insert features six large pockets for full-size SD cards and six small pockets for microSD cards.
The foam insert has a somewhat clever radial design clearly inspired by the film spool it replaces. VNTG8 comes in two varieties, one that features a new Goldberg Brothers canister from remaining stock produced in the 1970s, the other featuring used canisters sourced from various places throughout the US.
In addition, the polyethylene foam insert will be offered as a standalone option for buyers who have their own 8mm film canisters, but only if the Kickstarter campaign reaches its $ 7,000 stretch goal. A Goldberg canister VNTG8 with foam insert is offered to backers who pledge at least $ 19. Delivery is estimated to start in February 2018 if the campaign is successful.
Modern mosquito-borne diseases like Zika and West Nile fever call for traditional insect repellents like pyrethrum mosquito coils and creative coil holders.
The classic mosquito coil was invented in Japan over a century ago and has changed very little over time. Ditto for the coil holders, usually made of heat-proof ceramic traditionally crafted in the form of an open-ended pig. Called “katori buta“, these hog-like holders have become symbolic of summer in Japan, Australia, Africa and South America, where smoldering mosquito coils have always been the go-to skeeter repellent.
Never Boaring
The coils are made mainly from Pyrethrum derived from the powdered seed heads of Tanacetum cinerariifolium, a type of Chrysanthemum. Considered non-toxic to humans and pets, the smoke emitted by mosquito coils effectively repels any and all insects while its coiled design ensures it will smolder for roughly 7 to 9 hours. Some variations on the classic pig-design coil holder evoke cows, cats and even hedgehogs should one be feeling a tad kosher. Others take the opposite tack and, er, totally and realistically pig out.
Fruit-Fighters
With over a century of use to work with, creative types have come up with a plethora of mosquito coil holder designs with which to complement your newly bug-free home. Here is the Shigaraki-yaki Watermelon Ceramic Mosquito Coil Holder, individually made in Japan and available in red or yellow.
Feelin’ Hut Hut Hut
Mosquitoes can transmit a number of debilitating illnesses and in sub-saharan Africa, malaria is endemic. No surprise, then, that in Malawi if one wants a mosquito coil holder it’s a simple matter of browsing the local pottery market. That’s where Matt & Rachel Floreen of Africa Stories found this delightful hand-made ceramic coil holder.
Spidey Sense
Some folks want to set tradition aside, others chuck it out the window – and nail the window shut! Take this spider-themed mosquito coil holder from northern Thailand, if you dare. The matte black finished steel holder is no doubt child-proof while using it should keep your home skeeter-proof. In related news, some mosquito coils in Thailand are purple.
Goofy Is As Goofy Does
Here’s a goofy mosquito coil holder listed for sale at T3-Toys. We’re not “hav’n a go,” by the way, it really is a Goofy mosquito coil holder – officially authorized by Disney and sold sometime in the ’90s at Tokyo Disneyland. Guess it’s a better souvenir than a dumb t-shirt.
Next Page – Click Below to Read More: Buzz Off 15 Smokin Hot Mosquito Coil Holders
Pretty Pointy: 15 Cool Concept Toothpick Holders
You can pick your friends and you can pick your teeth, but you can’t pick your friends’ teeth… until now, thanks coinci-dentally to 15 cool concept toothpick holders sweet enough to make anyone …
Stacked Ceramics: Shop Floor Made from 25,000 Pieces of Pottery
A 400-year-old ceramics studio in Japan has completely remodeled their store with a most remarkable addition: a walkable surface constructed from a stack of tens of thousands of scrapped pieces …
You’re Fired: 9 Smokin’ Hot Abandoned Match Factories
Churned out by the billions in enormous unsafe factories, matches were indispensable whether the aim was repelling Morlocks or merely lighting one’s pipe.
If celebrity gossip, comic books or certain shades of monochrome are higher on your reading list than classic literature, no need to feel bad. Just grab your camera and library card and listen up!
In a few quick steps we will show you how to use your photography skillz to hide your favorite (if slightly embarrassing) reads in plain sight.
These photo magazine/book holders will make your shelf look perfectly respectable while your secrets are still just a quick reach away.
Go put on your dark coat and sunglasses – we are going undercover!
Learn How to Make Your Own Incognito Magazine Holders
(…) Read the rest of Incognito Magazine Holders (243 words)
The Holidays are quickly approaching, and it’s time to get crafty.
So what are you bringing to the table?
It may be all about the turkey, dressing and casseroles, but these handmade table place holders are sweeter than pumpkin pie.
This DIY tutorial incorporates some of our favorite things: photos (duh!), tiny pumpkins (yay!) and Thanksgiving (yum!).
They’ll make your dinner table look *awesome*, and they’ll show your loved ones how much they mean to you.
Now isn’t that what Thanksgiving is all about?
Make Photo-rific Table Decor!
p.s. Today you can win a photo-licious Camera Cookie Cutter Set! Just follow our Pinterest to enter.
Why it’s cool:
Show your family what Thanksgiving means to you.
Even if you’re not hosting the big dinner, bringing these to the table is sure to be a hit.
These two projects keep it simple and make a statement.
Make photo place settings that list reasons why you’re thankful for each person on the back.
They’re quick and easy to make, and the gesture will go a long way.
Or make a family tree centerpiece that incorporates your loved ones near and far.
It will brighten up the table, and maybe even get you an extra slice of pie! (score!)
Photo Table Settings:
Ingredients:
Photographs
Cardstock
Glue
Regular Scissors
Scalloped Edge Scissors
Pen and Pencil
Ruler
18-gauge Floral Wire
Baby Pumpkins
STEP 1: Prep Images:
Choose your favorite photo of each person, or even a pic of you two together.
If you don’t have photos of them, choose one that represents a happy memory or something special about them.
Use editing software to adjust the color and contrast, or turn them black and white.
Size each photo to 2.5″ square. This could be larger or smaller, depending on the size of your table, plates, and pumpkins.
Print them out using photo paper in your home printer, or take them to a nearby photo lab.
TIP: Make a mockup with a few different sizes before you print the photos. That way you can see which size will work best in your setting.
Step 2: Cut Photos:
Trim your photos with normal scissors to a little larger than you want them to be.
Use a pair of scalloped edge scissors to give your photos that old-timey feel. You can pick these up at any craft store.
Go around all four sides of the photo with the scalloped edge.
TIP: Be creative. You can cut your images square, with or without a border, or go for funky shapes… circles, stars, you name it!
Step 3: Cut Card stock:
To give your photo place card some stability, you’ll want to attach it to a piece of card stock.
Measure your image and determine how much of a border you want around the photograph.
To get a 1/4″ border on each side of your photo, place your photo in the corner, and measure 1/2″ larger than your picture.
Draw your lines and use regular scissors and cut out your shape..
Step 4: Glue:
Put a thin layer of glue on the backside of your photo.
Make sure to spread it evenly, lumpy photos won’t look so hot.
Center the photo, and press it into place.
Let it dry.
TIP: Don’t forget the edges! Make sure you cover those scalloped edges with glue. That will keep them from sticking up at the end.
Step 5: Write:
After your images are completely dry, flip them over on a clean surface.
Write why you’re thankful for them on the backside of the place card.
TIP: Practice what you will say and your handwriting on another piece of paper before putting it on the back of your photo.
Step 6: Wrap Wire:
Cut your wire into 12″ sections.
Take the top part, and wrap it around your fingertip 3 times to make a tight spiral for the photo to sit in.
Wrap the bottom of the wire to the stem of the pumpkin.
You want to make sure it has a good grip, and won’t fall over when you place the photo in the top.
TIP: If your pumpkin has a very short stem, you can use a bit of glue to hold your wire in place. Be sure to let it dry before putting your photo in the top. The thicker the wire (smaller gauge number), the stronger it will be. Stronger wire will hold it’s shape better.
Step 7: Position Photo:
Now, place your photo in between that spiral you made at the top.
Check its stability, and make any adjustments necessary to keep it in place.
You might need to reposition some of the wire at the bottom, or squeeze that spiral a little tighter.
Place your pumpkin in the center of your plates.
Set your table, and oh yea, invite your family to dinner!
Family Tree Centerpiece:
Ingredients:
Photographs
Cardstock
Glue
Xacto or Scissors
Ruler
Pencil
Vase/Jar
Small Pebbles
Tree Branches
18-gauge Floral Wire
Floral Tape (optional)
Decorative Berries (optional)
Step 1: Prep Images:
Gather the images you want to use for your family tree.
Edit and size them on the computer, then print them out.
We made our images 2″ x 3″ to fit our branches. You may want yours bigger or smaller.
Use an Xacto or scissors to cut them down to size.
Step 2: Make Leaves:
Pencil in a leaf shape on the photo itself.
Use scissors to cut it out.
Next, place the leaf on a colored piece of card stock. This will be the backside of each leaf.
Cut the card stock to the exact size of the photograph, or leave a little border for some colorful accents.
TIP: Draw out a few leaf shapes on a scratch piece of paper first to get a feel for what you like. Using a stencil could help, but they don’t all have to be perfect.
Step 3: Glue Wire:
Glue together the photograph, card stock, and wire.
Place a thin layer of glue on the card stock, and sandwich the wire between the card stock and the photo.
Let it dry completely.
Step 4: Wrap Wire:
Once your glue has dried, you can start wrapping your leaves onto the branches.
Place the leaf at the end of the branch.
Tuck the branch behind the photo, and start wrapping the wire.
TIP: You’ll be able to adjust the placement after it’s attached, so don’t worry about that too much right now.
Step 5: Cover Wire:
This step is optional, but can look great if you choose to do it.
Wrap your wire and the branch with brown floral tape.
This will make it blend the wire with the branch, and give a nice, finished look to your centerpiece.
This tape stretches and sticks to itself. Start on the inside of the branch, wrap down to the photo leaf, then back up.
Step 6: Bend into Place:
Now you’ve given the branch some stability and flexibility by adding the wire.
You can bend your photo leaves to face the direction you desire.
The colored card stock on the back makes sure it looks good from all angles!
Repeat Steps 1 through 6 for the rest of your photos.
Step 7: Set It Up:
Once you’ve secured all of your leaves on your branches, place them in a jar or vase filled with pebbles.
Add some decorative berries to fill out the inside of those bare branches, and add some fall colors to your table.
Place these on the center of your table to really bring the family together!
More Thanksgiving Ideas
Use photos as paper leaves to make a Family Tree Centerpiece.
Make a Photo Cornucopia. Ask guests to bring pics of what they are thankful for.
Set up a Photobooth after dinner to capture (thank)full expressions.
Related posts:
Turn Your Photos into Beautiful Glass Etchings! Extra photos for bloggers: 1, 2, 3 Before printers spewed…
Vote With Your Camera: The Polling Place Photo Project ~Have a cool photo product or site? Reach 225,000 photo…
Prism Yard — A Place to Share & Browse Camera Collections You consider your cameras family. You remember the day each…
Extra photos for bloggers: 1, 2, 3
Show your family what Thanksgiving means to you.
Choose your favorite photo of each person, or even a pic of you two together.
Trim your photos with normal scissors to a little larger than you want them to be. 
To give your photo place card some stability, you’ll want to attach it to a piece of card stock.
Put a thin layer of glue on the backside of your photo.
After your images are completely dry, flip them over on a clean surface. 
Cut your wire into 12″ sections. 
Now, place your photo in between that spiral you made at the top.
Gather the images you want to use for your family tree. 
Pencil in a leaf shape on the photo itself. 
Glue together the photograph, card stock, and wire.
Once your glue has dried, you can start wrapping your leaves onto the branches.
This step is optional, but can look great if you choose to do it.
Now you’ve given the branch some stability and flexibility by adding the wire.
Once you’ve secured all of your leaves on your branches, place them in a jar or vase filled with pebbles.
You must be logged in to post a comment.