RSS
 

Posts Tagged ‘Fiber’

Knit Wit: 17 Fantastically Weird Fiber Art Creations

03 Dec

[ By Steph in Art & Sculpture & Craft. ]

weird knits my boyfriend

Imagine your grandmother presenting  you with a knitted facehugger, dwarven helm or a life-sized boyfriend pillow for your birthday instead of a scratchy wool scarf. The world of knits goes far beyond beginner’s patterns for sweaters and caps, occasionally encompassing entire rooms or covering military tanks. This collection of weird knitted and crocheted things might even inspire you to break out a pair of needles yourself.

Facehugger Mask
weird knits facehugger

Well, isn’t that cute. It’s a cozy little alien face hugger, just like you always wanted.

Brutal Knitting by Tracy Widdess
weird knits brutal

weird knits brutal 2

weird knits brutal 3

weird knits brutal 5

‘Brutal Knitting’ is a fitting name for this ongoing project by artist Tracy Widdess, which stretches the craft far beyond its humble origins of warmth and practicality. Her highly unusual knit works include some of the most bizarre hats you’ve ever seen, and a replica of the Lament Configuration puzzle box from Hellraiser.

The World’s Cutest Penguin Sweaters
weird knits penguin sweaters

weird knits penguin sweaters 2

weird knits penguin sweaters 3

Australia’s oldest man, 109-year-old Alfred Date, put his 80 years of knitting experience to work to create the world’s cutest sweaters for a bunch of oil-covered penguins after a spill on the Australian Phillip Island. The sweaters keep the penguins from ingesting toxins and prevent water from getting trapped under their oily feathers, which can cause them to freeze.

Gimli’s Dwarven Helm
weird knits dwarven helm

“The helm I based directly on the helm that Gimli wears in the Lord of the Rings movies, the beard was my own design with massive creative input from my brother,” says DeviantArt member SadDaysCrochet of this creation.

My Knitted Boyfriend
weird knits my boyfriend 2

weird knits boyfriend 3

If it’s a little lonely in your bed, but you don’t have the patience that a real flesh-and-blood boyfriend requires, there’s a solution. ‘My Knitted Boyfriend’ can be worn like a terrifying bodysuit by a real person, or stuffed to create a life-sized man-shaped pillow.

Surreal Knitted Room by Olek
weird knits room oleksiak

weird knits room oleksiak 2

The fiber artist known as ‘Olek,’ who’s responsible for yarn bombing practically every surface you can think of, knitted an entire gallery space for a piece called ‘Keith Meets Arch of Hysteria,’ a tribute to artists Keith Haring, Annie Leibovitz and Louise Bourgeois.

Next Page – Click Below to Read More:
Knit Wit 17 Fantastically Weird Fiber Art Creations

Share on Facebook





[ By Steph in Art & Sculpture & Craft. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]


WebUrbanist

 
Comments Off on Knit Wit: 17 Fantastically Weird Fiber Art Creations

Posted in Creativity

 

ARRI announces the ALEXA Mini 4K UHD, a lightweight carbon fiber cinema camera

24 Feb

We don’t normally write about thirty-thousand-dollar cinema camera, but the ARRI ALEXA Mini caught our eye. This digital motion picture camera packs a whole lot of firepower into a super compact, carbon-fiber body. The specs also foreshadow what me might expect in future consumer-level cameras, in terms of video capabilities. Read more

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on ARRI announces the ALEXA Mini 4K UHD, a lightweight carbon fiber cinema camera

Posted in Uncategorized

 

Review: Zenelli Carbon Fiber Gimbal Tripod Head

27 Jan

One of the more impressive pieces of gear that I’ve been using as of late is the Zenelli CARBONZX Carbon Fiber Gimbal Head. I can’t say I’d have ever thought of myself being excited over a tripod head, but Zenelli has made one of the sexiest pieces of equipment I’ve seen and used. As you’d imagine any product that is Carbon Fiber is going to come with a hefty price tag and this gimbal head is no exception, but for those in need of cutting the weight of their gear for remote trips this could be worth the spend. It’s important to note that the fact this gimbal head is carbon fiber is not the only reason to consider it. The engineers at Zenelli have come up with very innovative features to protect high value super telephoto lenses with the Save Lens Lever®, Pin Save Tablet® and SaveLook® lever.  The Save Lens Lever ensures the lens remains balanced and does not fall when changing gear or leaving your gear unattended. The Pin Save Tablet is a mechanism that ensures the arm of the gimbal head cannot uncouple accidentally.  The Save Look lever ensures that the gimbals quick release can’t be accidentally released allowing your camera and/or lens to fall plus it allows for preset tightening of your Arca-type lens plates. I was also impressed the manufacturer thought to support panoramic photography by engineering the head so the lens plate mount is perfectly centered atop the rotational axis of the tripod head base. I demonstrate all of these features in my review video and with out a doubt the Zenelli CARBONZX Carbon Fiber Gimbal Head  gets my highest rating.

Order your Zenelli CARBONZX Carbon Fiber Gimbal Head at B&H

Key Specifications

Height: 9.25″ (23.5 cm)

Width: 3.58″ (9.1cm)

Depth: 9.33″ (23.7 cm)

Weight: 2.6 lb

Distance from Center of Lens to Vertical Arm: 3″ (7.6 cm)

Arca-Type Compatible

360° Pan & Tilt Ranges

Quick-Release Lever

Save Lenses Lever (Home Bar)

Bubble Level

(optional) Camouflage Cover

Copyright Jim M. Goldstein, All Rights Reserved

Review: Zenelli Carbon Fiber Gimbal Tripod Head

The post Review: Zenelli Carbon Fiber Gimbal Tripod Head appeared first on JMG-Galleries – Landscape, Nature & Travel Photography.

       

Related Stories

  • Review: Zenelli Carbon Fiber Gimbal Tripod Head – Enclosure
  • Review: Landscapes in Lightroom 5 eBook
  • Review: Landscapes in Lightroom 5 eBook – Enclosure
Feed Ads by FeedBlitz
powered by ad choices

 


JMG-Galleries

 
Comments Off on Review: Zenelli Carbon Fiber Gimbal Tripod Head

Posted in Equipment

 

Future Materials: Lightweight Carbon Fiber Architecture

11 Dec

[ By Steph in Conceptual & Futuristic & Technology. ]

carbon fiber architecture 3

The buildings of the future might just look as lightweight as a spiderweb, seeming as if they could blow away at any moment, while actually being incredibly strong. In the past, architects had to choose between delicate looks and durability, but the development of new composite materials unveils all sorts of possibilities. The c-LITH research project demonstrates the strength of digitally fabricated carbon fiber filaments stacked in small sections.

carbon fiber architecture 2

carbon fiber architecture 6

The team created a prototype that’s 14 feet tall and 8 feet wide at the base, yet uses only 30 pounds of material. It’s made of 143 wound carbon fiber filament ‘bricks’ that can be scaled up for architectural production. The use of carbon fiber has been fairly limited in architecture, as it usually comes in panels like those used for airplanes, and isn’t exactly cost-effective.

carbon fiber architecture 4

carbon fiber architecture 5

Michigan-based architecture firm Area used inexpensive cardboard molds to create the sections using carbon fiber filament pre-pregnated with epoxy resin to keep it malleable until baked. They built their own low-heat oven to cure the sections at 260 to keep the cardboard from catching fire. Once finished, the pieces were soaked in water so the cardboard could be removed.

carbon fiber architecture 7

The resulting bricks are stacked into a tetrahedral geometric shape, and pins connect the components, making them easy to assemble and disassemble. The designers see the possibilities as virtually endless, and it’s fun to imagine what could be made with this material at a larger scale.

Share on Facebook





[ By Steph in Conceptual & Futuristic & Technology. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]


WebUrbanist

 
Comments Off on Future Materials: Lightweight Carbon Fiber Architecture

Posted in Creativity

 

Mobile 3D Clay Printer: Whole Houses from Local Mud & Fiber

03 Nov

[ By WebUrbanist in Architecture & Houses & Residential. ]

3d printing dirt water

Easy to disassemble and transport on demand, this 3D-printing solution uses natural materials to build completely stable homes from readily available resources.

3d printed architecture mud

Designed by WASP (World’s Advanced Saving Project) and deployed recently at a maker fair in Rome, the Delta device itself is lightweight and can be loaded onto a truck, moved then rebuilt in a matter of hours.

3d printed architectural home

Structurally, the system employs curved walls, arches and domes to create solid buildings that can withstand the test of time. For its source material: dirt, clay and water are fed into the machine, leaving the results to dry naturally in the sun. Other substances like wool can be added to help bind the solution. Architecturally, the designs draw on regional vernaculars.

3d printer delta machine

Part of WASP’s larger goal here is to raise awareness of non-plastic building materials that can be used in 3D printers, all with the same degree of precision found when using plastics. This process has started with demo models and is leveling up to full-scale structures.

3d house printing technology

As for future endeavors: “the company is in the process of exploring 3D printing implantable ceramics, such as hydroxylapatite, bioglass and aluminium oxide, to create bone implants with the same porous structure as natural bone.”

Share on Facebook





[ By WebUrbanist in Architecture & Houses & Residential. ]

[ WebUrbanist | Archives | Galleries | Privacy | TOS ]


WebUrbanist

 
Comments Off on Mobile 3D Clay Printer: Whole Houses from Local Mud & Fiber

Posted in Creativity

 

Manfrotto announces carbon fiber BeFree tripod

14 Aug

Manfrotto has announced a carbon fiber version of its BeFree tripod, previously available only in aluminum. The lighter carbon fiber BeFree weighs 1.1 kg/2.4 lbs (as compared to the 1.4 kg/3 lb aluminum version) and features a reverse folding design that allows it shrink to 15.7 inches (~40cm) in length when collapsed and stored. Designed for travel, it can hold up to 4 kg/8.8 lbs and is available now in the US for $ 389. Read more

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Manfrotto announces carbon fiber BeFree tripod

Posted in Uncategorized

 

Travel tripods: 5 carbon fiber kits reviewed

28 Jul

What makes a tripod a good travel companion? We test out five carbon fiber ‘travel’ tripods that while compact and light, are also comfortably tall and capable of supporting a reasonable amount of gear. This review covers five models, examining their features, functions and ergonomics in use both in the studio and out in the field. Click through to read the roundup.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Travel tripods: 5 carbon fiber kits reviewed

Posted in Uncategorized

 

Accessory Review: Manfrotto 190 Carbon Fiber Tripod

13 Dec

Manfrotto-190-Feature.jpg

Lauded as a compact semi-professional model and constructed of cross-woven carbon fiber, the new 190 ($ 409.88 body only) would be an eye-catching addition to any camera kit. Manfrotto made several updates to the new model, but do they place it far enough beyond the old 190, which cost $ 259.95, to justify price hike? Find out in our review

News: Digital Photography Review (dpreview.com)

 
Comments Off on Accessory Review: Manfrotto 190 Carbon Fiber Tripod

Posted in Uncategorized

 

Accessory Review: Manfrotto 294 Carbon Fiber Tripod

03 Nov

Manfrotto-294-CF-Tripod-News.jpg

Carbon fiber is recognizable by its distinctive ‘woven’ appearance and useful because of its impressive strength-to-weight ratio. This makes it a great choice for structures and products that need to be light and portable, but capable of supporting a lot of weight. For this reason, carbon fiber is all the rage in the high-performance world of motorcycles, cars, boats and also photography. Manfrotto’s 290 Series is aimed at photographers on a budget. Should the Manfrotto 294 CF be on your shopping list? Find out in our review.

News: Digital Photography Review (dpreview.com)

 
Comments Off on Accessory Review: Manfrotto 294 Carbon Fiber Tripod

Posted in Uncategorized

 

Accessory Review: Manfrotto 294 Carbon Fiber Tripod

02 Nov

Manfrotto-294-CF-Tripod-News.jpg

Carbon fiber is recognizable by its distinctive ‘woven’ appearance and useful because of its impressive strength-to-weight ratio. This makes it a great choice for structures and products that need to be light and portable, but capable of supporting a lot of weight. For this reason, carbon fiber is all the rage in the high-performance world of motorcycles, cars, boats and also photography. Manfrotto’s 290 Series is aimed at photographers on a budget. Should the Manfrotto 294 CF be on your shopping list? Find out in our review.

News: Digital Photography Review (dpreview.com)

 
Comments Off on Accessory Review: Manfrotto 294 Carbon Fiber Tripod

Posted in Uncategorized