RSS
 

Posts Tagged ‘Cases’

Mobile by Peak Design is a new line of smartphone cases and accessories with unique ‘SlimLock’ design

20 Oct

Peak Design is back with its latest crowdfunding campaign. This time, the San Francisco-based accessory manufacturer has found a way to put a unique spin on a new line of cases and accessories for smartphones.

The legs of the tripod accessory fold out wide to create a sturdy base. If you’re using larger, heavier devices, the case even has a built-in hex tool for tightening the joints of the ball mount and legs.

The new Mobile by Peak Design lineup consists of smartphone cases and universal mounts that use Peak Design’s ‘SlimLink’ hardware to easily connect an ecosystem of accessories, including an ultra-compact tripod, various magnetic and locking mounts, a wallet and even wireless charging mounts.

The tripod accessory is tapered and easily snaps into place on the rear of the case or universal mount.

What makes the SlimLink connection on each of the cases and adapters unique is its ability to work with both hard-locking (mechanical) and soft-locking (magnetic) mounts. This means some of the accessories, such as the mobile tripod, can connect with a quick snap of the built-in magnets, while mounts that need a more secure hold, such as the bike and moto mounts, can lock into place for a more secure hold.

A close-up shot of the proprietary SlimLock system.

The SlimLink connection is made of ceramic-zirconium, meaning it will still allow Qi charging to work through the case. At launch, the Mobile by Peak Design lineup will offer dedicated Peak Design Everyday Cases for the following devices (other phones will work using the universal adapter):

  • iPhone 12 (6.1” + 5.4”), Pro Max, Pro
  • iPhone SE2
  • iPhone 11, Pro, Pro Max
  • Samsung S20, S20 Ultra, S20 +
The universal mount ensures nearly any older device—even those with cases—should be able to be adapted to work with the Mobile by Peak Design system.

Peak Design is also supporting cross-compatibility between its mounting system and the new MagSafe connection found in Apple’s latest iPhone 12 devices. Specifically, Peak Design says its soft-locking mounts and accessories (tripod, wallet, charging stand, wall mount and car mounts) will work with Apple’s MagSafe phones and cases. Peak Design also says iPhone 12 devices in the Peak Design Everyday Case will work with Apple’s MagSafe charger and notes Apple’s MagSafe accessories, such as their wallet, will be able to be connected to a Peak Design Case, but it doesn’t specify how exactly that will be achieved.

As of the announcement of the Kickstarter campaign, Peak Design lists four different cases or adapters and eleven different accessories. An infographic overview of the ecosystem is shared below:

You can find out more information on the Mobile by Peak Design lineup by heading over to the Kickstarter campaign. Below is an infographic with a pricing breakdown for the various accessories, adapters and cases. As with all of Peak Design’s other products, all cases and accessories are individually serialized and guaranteed for life.

This is Peak Design’s 10th Kickstarter campaign and should, if it reaches its goal, ensure Peak Design surpasses smartwatch manufacturer Pebble for the all-time most money raised through Kickstarter campaigns — $ 43.4M.

After a successful funding and launch on Kickstarter, the Mobile by Peak Design system will be available to purchased through Peak Design’s online shops as well as partnered retailers in Spring 2021.


Disclaimer: Remember to do your research with any crowdfunding project. DPReview does its best to share only the projects that look legitimate and come from reliable creators, but as with any crowdfunded campaign, there’s always the risk of the product or service never coming to fruition.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Mobile by Peak Design is a new line of smartphone cases and accessories with unique ‘SlimLock’ design

Posted in Uncategorized

 

Filmmaker uses COVID-19 work lull to make and sell $10 3D-printed camera battery cases

07 May

A documentary film maker from Utah has designed and built a series of battery holder magazines that he says help to solve the problem of knowing which batteries are fresh and which are depleted. The 3D printed magazines hold three or four batteries from common cameras and allow the batteries to be inserted contacts up for dead batteries and down for fresh ones.

Tim Irwin, who is printing the magazines in his basement, had been meaning to come up with a solution to this problem for a while, and had tried downloaded plans for 3D printed magazines in the past, but found they always broke. ‘I originally found files on Thingiverse that worked for a bit. But all the designs I tried from there ended up breaking because of a weak point in the print’ he explains. ‘When the travel restrictions around Covid 19 hit every one of my gigs was cancelled or postponed, so it seemed like prefect time to dive into this side mission. I designed my own from scratch and refined it over a long period of time until I was happy with the product. I’m always looking for ways to make my kit more efficient, quick, and organized. The Battery Mag was born out of that.’

Tim has designed the magazine so that when fresh batteries are loaded with their contacts down they are isolated from each other and from anything else the magazine might come into contact with, so the risk of shorting is avoided. And with deads loaded with the contacts facing up it is easy to see at a glance which battery to reach for next in fast moving situations.

Tim, who owns Functional Films, makes commercial video documentaries and says he is usually on the road shooting about 140 days a year. That has all stopped due to the coronavirus out-break, so this is how he is filling his time.

The Battery Mags are available for Panasonic DMW-BLF19, Canon LP-E6/N, Pentax DLI90, Sony NP-FZ100, Sony NP-FW50 batteries and he says a unit for Panasonic S cameras is also in production. The magazines are $ 9, $ 10 and $ 14 each, respectively, and can be ordered via the Battery Mag website.

For examples of Tim’s work see his Instagram page.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Filmmaker uses COVID-19 work lull to make and sell $10 3D-printed camera battery cases

Posted in Uncategorized

 

Nomad launches iPhone 11, Google Pixel 4 cases with Moment lens mount

07 Feb

Accessory maker Nomad has announced new smartphone cases in its Rugged line. The new models are available for all Apple iPhone 11 models as well as the Google Pixel 4 and feature an integrated mount for Moment lenses.

In a press release, Nomad said:

Our newest cases are Moment compatible. Meaning, they are the same style and quality you’ve come to expect from Nomad but now with an integrated Moment mounting plate. These will be available for all iPhone 11 models as well as Google Pixel 4 phones.

According to Nomad the cases are designed to withstand drops from up to six feet height and available in two colors, black or brown Horween Leather. They also come with a lanyard attachment point.

The lens mount allows you to attach any lens from premium accessory lens makers Moment, which includes an 18mm wide-angle, a 15mm fisheye, an anamorphic lens, a macro lens, and a 58mm tele lens, making the Nomad lenses an interesting alternative to Moment’s own cases.

The cases are available now form the Nomad website for $ 50.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nomad launches iPhone 11, Google Pixel 4 cases with Moment lens mount

Posted in Uncategorized

 

Shiftcam add-on lens cases are now available for Apple’s iPhone 11 models

08 Jan

Most current high-end smartphones come with ultra-wide and/or dedicated tele lenses, offering wider focal length ranges than older devices. However, add-on lenses are still a popular way to expand the creative potential of smartphone cameras even further.

ShiftCam has been supplying its add-on lens cases since the iPhone 7 generation. Now the company has announced the latest versions for the iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max.

The Shiftcam model for the iPhone 11 model adds a 180-degree fisheye lens, 10x macro, and a circular polarizer to your arsenal. The iPhone 11 Pro and Pro Max models get four lenses in addition to a circular polarizer:

  • 180-degree fisheye
  • 4x telephoto
  • 10x macro
  • 20x macro
  • Circular Polarizer

Like for previous Shiftcam cases, operation is easy. You move the required lens into place on a slider and select the corresponding lens of the built-in camera in the Apple camera app. This also means all your add-lenses are always with you and on the phone, so you don’t have to carry spare lenses in a bag like for more conventional add-on systems.

On the downside, your phone is bulkier than usual and you cannot use any other cases.

The new Shiftcam cases are available now. The iPhone 11 version is $ 64.99, while the iPhone 11 Pro and Pro Max cases will each set you back $ 74.99. More information is available on the Shiftcam website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Shiftcam add-on lens cases are now available for Apple’s iPhone 11 models

Posted in Uncategorized

 

Apple’s Smart Battery Cases for iPhone 11 models feature a dedicated camera button

21 Nov

Apple has announced its new Smart Battery Cases for its latest iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max devices, and hidden within them is a little surprise. Each of the Smart Battery Cases features a dedicated camera button that launches the Camera app.

According to the product description, the dedicated camera button will launch the Camera app regardless of whether the iPhone is locked or unlocked. ‘A quick press of the button takes a photo and a longer press captures a QuickTake video,’ reads the description.

A close-up look at the dedicated camera button, located on the right-hand side of the case when looking at the screen of the iPhone.

This marks the first time any dedicated camera button has been found on a first-party case or battery case from Apple and further amplifies Apple’s emphasis on photography with its latest devices.

The Smart Battery Cases cost $ 129 for all iPhone 11 models and come in three colors: Black, White and Pink Sand. They are available to order now through Apple’s online store, physical Apple Stores and authorized Apple retailers.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Apple’s Smart Battery Cases for iPhone 11 models feature a dedicated camera button

Posted in Uncategorized

 

Moment launches new sling bags, wallet cases for mobile photographers

30 May

Moment has introduced a new range of sling-style bags and a series of wallet cases for photographers who like to travel light. Described as part fanny-pack, part sling the bags are intended to look good and be functional at the same time.

The bags are designed to hold a mobile phone as well as Moment’s accessory smartphone lenses and even a small compact camera, as well as the usual travel essentials like passports. The bags can be worn over the shoulder like a sling or around the waist like a fanny pack, and come in a range of materials and colors.

Smaller wallet cases are aimed at those who want to carry only daily essentials along with their phone, while a new line of phone cases come with pockets for credit cards for those who really want to travel light.

The Fanny Slings costs $ 69.99 and the Crossbody Wallets cost $ 74.99. To purchase either or for more information visit the Moment website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Moment launches new sling bags, wallet cases for mobile photographers

Posted in Uncategorized

 

Think Tank teams up with SKB for hard cases, launches MindShift ‘PhotoCross’ sling bags

03 Jul

MindShift Gear has announced ‘PhotoCross,’ a new lineup of sling bags designed for adventure photographers. Coming alongside this announcement is one from sister company Think Tank Photo, which has teamed up with SKB to offer the latter company’s hard cases fitted with soft inner dividers and organizers from Think Tank. The SKB/Think Tank hard case lineup currently includes 10 models.

The new hard case lineup comprises ‘SKB designed by Think Tank’ models featuring SKB’s own waterproof and durable iSeries hardshell exteriors. Think Tank has fitted its own internal modular organizers and protective padding into the cases, including movable dividers and lid organizers. The hard case lineup ranges in price from $ 109.99 to $ 329.99.

Joining those hard cases is MindShift Gear’s PhotoCross 10 and PhotoCross 13 bags for photographers in the field. Both bags feature space for photographic gear and either a 10-inch tablet (the PhotoCross 10) or up to a 13-inch laptop (the PhotoCross 13). The bags’ designs include T-pulls, carrying handles on both the side and top, a 320G breathable air-mesh back panel, a pocket that can accommodate most 1-liter water bottles and a 3-point harness.

The PhotoCross 10 bag can accommodate either a mirrorless camera body and up to five lenses or an ungripped DSLR and up to two lenses plus a tablet. The larger PhotoCross 13 can accommodate up to an ungripped DSLR alongside up to four lenses – including a 70–200mm F2.8 lens, MindShift explains – plus ‘some’ 13-inch laptops. The PhotoCross 13 will cost $ 129.99; PhotoCross 10 will cost $ 114.99.

Via: Think Tank Photo

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Think Tank teams up with SKB for hard cases, launches MindShift ‘PhotoCross’ sling bags

Posted in Uncategorized

 

Tenba updates Roadie line of rolling cases

10 Jun

The cases come with a water-repellent exterior of 1680-denier ballistic nylon, YKK RC-Fuse zippers and aircraft-grade aluminum luggage handles. A rain cover provides additional protection in wet weather and the wheels are user-replaceable.

The new Roadie Roller 18, 21, Hybrid 21 and Air Case 21 all comply with most international and U.S. domestic carry-on regulations, while the Roadie Roller 24 is suitable for non-airline use only but can carry cameras and lenses along with flash and lighting systems. 70-200mm 2.8 lenses will fit standing vertically to maximize interior storage. More information is available on the Tenba website.

Press Release:

Tenba Roadies are sleek, discrete cases for uncompromising photographers and filmmakers that include some key “industry first” features like a removable camera insert, an exterior pocket for a portable battery, and an Air Case model with a rigid shell that can be safely shipped or checked at the airport. Roadies were designed with a high-end luggage aesthetic to ensure they look professional yet don’t draw unwanted attention to the gear inside.

Tethered Case Lid
Interior straps keep the lid upright when opened so it works as a mobile workstation, and they help the Roadie maintain a small footprint in tight environments.

Drop-In Tripod Carrier
This is Tenba’s quickest and simplest tripod carrier ever. Virtually any size tripod can be stored in just a few seconds. Also holds light stands when Roadie is being used for lighting gear.

Extra Bag Strap
A quick and hands-free way to attach a second bag to the Roadie, just like pilots and flight attendants do.

Leather Trimmed Handles
Padded top and side handles make the Roadie comfortable to carry even when fully loaded, and waterproof full-grain leather trim improves the grip.

Integrated TSA-Approved Security
The Roadie includes an integrated lock for the zipper on the camera compartment, plus an additional security cable and padlock to secure the case on location. Both locks are TSA approved.

Professional Features
Roadies are built to deliver on Tenba’s promise for durability, with a water-repellent exterior of 1680-denier ballistic nylon, YKK® RC-Fuse zippers and aircraft-grade aluminum luggage handles. For additional protection in wet weather, each bag includes a WeatherWrap rain cover. The user-replaceable wheels combine shock absorbing TPU with high carbon steel bearings so they are sure to roll smoothly and quietly over any surface.

The Roadie Roller 18, 21, Hybrid 21 and Air Case 21 all comply with most international and U.S. domestic carry-on regulations, while the Roadie Roller 24 is suitable for non-airline use. Roadies are available now at Tenba authorized resellers.

Introducing Roadie Air Case Roller 21, Roadie Roller 24, Roadie Hybrid Roller 21, and a Few Industry First Features

Introducing Our Checkable, Shippable, Uncrushable Carry-on Rolling Case
One model in the Roadie Collection, the Roadie Air Case Roller 21, utilizes Tenba’s patented layered wall construction to provide the protection of a hard-shell case at a fraction of the weight. It can withstand more than 400 pounds stacked on top, so it will ensure equipment protection when the case needs to be checked unexpectedly, like when airline overhead space has filled up, or when flying on a small regional jet.

Introducing the Roadie Roller 24
Due to its larger-than-carry-on dimensions, the Roadie Roller 24 can efficiently carry large systems in a single case. Cameras and lenses can be stored along with flash and lighting systems, and 70-200mm 2.8 lenses will fit standing vertically to maximize interior storage.

Introducing the Roadie Hybrid Roller 21
A comfortable backpack harness enables the Roadie Hybrid Roller 21 to be carried when terrain is not especially “wheel friendly,” such as on stairs or over sand or dirt.

Quick Access Battery Pocket
Available in all models except Roadie Hybrid Roller 21 and Roadie Air Case 21
The rear zippered pocket can hold a battery for charging mobile phones and other portable devices. Twin zippers allow cables to be easily threaded out of the pocket.

Removable Padded Camera Insert
Included with all Roadie Roller models except Roadie 18
The removable insert allows a camera and 2-3 lenses to be carried independently inside a smaller shoulder bag. The insert can be paired with Tenba’s Packlite 10 travel bag to create a portable camera bag solution, allowing the user to leave the rolling case behind and just carry a core camera kit.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Tenba updates Roadie line of rolling cases

Posted in Uncategorized

 

Moment rolls out Kickstarter for redesigned lens and new cases for iPhone 7 / 7 Plus

08 Feb

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_5370414927″,”galleryId”:”5370414927″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });

Mobile photo accessory provider Moment is introducing two iPhone 7 / 7 Plus cases via Kickstarter: a battery case for storing extra charge, and a standard case. Both cases are compatible with a new wide-angle attachment lens designed specially for the 7 and 7 Plus.

The Battery Photo Case offers a two-stage shutter release button. When used with Moment’s camera app a half-press will acquire focus. Apple’s stock camera app will only recognize a full press and shoot accordingly. The case does not use Bluetooth to communicate with the phone, unlike previous Moment cases. Instead, it uses the Lightning connector, which the company says is 75% faster.

Moment’s new Photo Case is a cheaper alternative without the shutter button or backup battery. It’s slim and offers basic protection from wear-and-tear, and offers an attachment for a wrist strap.

Both cases provide a mount for the new Wide Lens (as well as an adapter for existing Moment lenses), which can be positioned over the phone’s wide and telephoto lenses. Moment says the lens has been re-designed considering the iPhone 7 and 7 Plus’ wider aperture lenses. The slightly larger lens is also lens prone to vignetting cause by misalignment. 

Planned MSRP for the Wide Lens is $ 100, the Photo Case is $ 30 and the Battery Photo Case is $ 100. The company is well on its way to its $ 500,000 Kickstarter goal, and is offering discounts to early backers. As with any Kickstarter project things might go awry, but if all goes to plan Moment will ship the new cases and lenses starting the end of May.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Moment rolls out Kickstarter for redesigned lens and new cases for iPhone 7 / 7 Plus

Posted in Uncategorized

 

Pelican lightens up with Air cases

15 Apr

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_2062335725″,”galleryId”:”2062335725″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });

Pelican cases have a reputation for sturdiness and reliability, making them a go-to for pros who want to guarantee their gear makes it to the shoot and back intact. Today Pelican has introduced the Air series of cases, boasting the same level of protection without all of the weight. The Air series cases are up to 40% lighter than their Protector series counterparts.

At launch, the Air series will include six sizes including an overhead compartment-friendly wheeled version, and Pelican plans to introduce 20 sizes over the next year and a half. The new cases are made of an HPX2 resin and will be offered in four configurations: no foam, with customizable cubed foam, with padded dividers or with Pelican’s TrekPak rigid dividers.

The Pelican Air series are available for pre-order now at pelican.com/air and will ship starting May 1, 2016. Prices range from $ 180 for the 1485 Air up to $ 340 for the 1615 Air wheeled check-in model.


Press release:

Pelican Products Introduces Pelican™ Air Cases That Are Up To 40% Lighter

TORRANCE, CA — April, 15, 2016 – Since 1976, the Pelican™ classic Protector™ case has been the go-to protective case solution for millions of people worldwide. It has made an impact in industries ranging from military and aerospace to photography and hunting. Today, Pelican is proud to announce the outcome of a relentless quest to offer Pelican users more versatility than ever before: Introducing Pelican Air cases. These new cases have been engineered to maintain the same standard of durability, but reduce the weight of each case by up to 40 percent and offer new size selections not currently available in the Pelican classic or Pelican Storm lines.

Available in six long-form, travel-ready sizes, Pelican Air cases are constructed of lightweight HPX2 resin, the next generation of Pelican’s proprietary formula that rebounds to stress without breaking. With the busy traveler in mind, the 1535 Pelican Air case (Wheeled Carry On) complies with overhead bin standards and the 1615 Pelican Air case (Wheeled Check In) complies with current airline check-in size regulations. 

Additional models are currently in development with more than 20 new sizes making their debut over the next 18 months. Each case passes the same performance tests (impact, drop, submersion, high and low temperature) that Pelican users have come to trust and is backed by the company’s legendary lifetime guarantee of excellence.

 “The Pelican brand is synonymous with protection and has set the gold-standard in the protective case market for more than 40 years,” said Lyndon Faulkner, President and CEO of Pelican Products. “While using the Pelican classic case design as the basis for the new line, our engineers have spent the past two years reimagining the classic case with a focus on taking out weight while maintaining the same high level of performance customers have come to expect from Pelican. This revolutionary Pelican Air case design underscores Pelican’s continuing commitment to innovation and making a legendary product even better.”

To construct a lighter case, Pelican’s engineering team faced the challenge of building lightness into every facet of the design without compromising Pelican’s renowned durability. By working with a team of materials scientists, Pelican was able to construct cases that are the lightest protective cases on the market today.

Pelican Air cases are available with several configurations:

  • No Foam (empty)
  • Pick N Pluck™ foam – manually customizable cubed foam
  • Padded Dividers – newly redesigned with a fully-sewn tub, felt exterior and high-visibility yellow interior, making it easier to identify equipment
  • TrekPak™ – a completely new divider system with rigid, customizable panels and locking pins

Pelican Air cases are available through select dealers, distributors and retailers starting May 1, 2016. For more information on Pelican Air cases and the full Pelican line, visit http://pelican.com/air. 

Pelican Products, Inc. is a portfolio company of Behrman Capital, a private equity investment firm based in New York and San Francisco. 

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Pelican lightens up with Air cases

Posted in Uncategorized