RSS
 

iFixit takes a look inside the Olympus PEN E-PL7

11 Jun

Inside the Olympus PEN E-PL7

The Olympus PEN E-PL7, like its Micro Four Thirds peers, is a pretty impressive little piece of engineering. It houses a 16MP Four Thirds sensor and a 3″ LCD that flips up 180-degrees. It accepts Micro Four Thirds lenses and ships with a pocket-sized external flash. Being curious types of people, we wanted to know how Olympus squeezes everything into a camera of the E-PL7’s size. Thankfully, there’s iFixit. Their disassembly guide gives an up-close look at what’s inside the camera – and you don’t have to void your warranty in the process.

Inside the Olympus PEN E-PL7

This disassembly starts the way so many projects do: with a screwdriver. Screws are removed from the bottom plate and sides of the camera.

Image via iFixit

Inside the Olympus PEN E-PL7

With some screws removed from the lens mount, this inner ring is revealed and carefully removed.

Image via iFixit

Inside the Olympus PEN E-PL7

With even more screws gone a pair of tiny springs can be taken out of the mount.

Image via iFixit

Inside the Olympus PEN E-PL7

Removing even more screws makes it possible to gently pull the chassis apart, but not quite all the way with a ribbon cable connecting the two pieces. 

Image via iFixit

Inside the Olympus PEN E-PL7

A camera divided. Highlighted in red is the ZIF connector keeping the ribbon cable attached to the motherboard.

Image via iFixit

Inside the Olympus PEN E-PL7

With the cable disconnected, the camera can be handled one half at a time.

Image via iFixit

Inside the Olympus PEN E-PL7

Here’s another look at the motherboard, with even more ribbon cables attached.

Image via iFixit

Inside the Olympus PEN E-PL7

Up top, the plate that holds the mode dial and shutter release can be removed once one more screw is out of the way. 

Image via iFixit

Inside the Olympus PEN E-PL7

…And with some ribbon cables disconnected, the sensor comes free of the camera body too.

Image via iFixit

Inside the Olympus PEN E-PL7

 E-PL7’s 16MP sensor lies 

Here’s a front view of the E-PL7’s 16MP sensor. 

Image via iFixit

Inside the Olympus PEN E-PL7

The camera is looking quite empty at this point. Here’s a sense of how small that motherboard is.

Image via iFixit

Inside the Olympus PEN E-PL7

…And with a few last cables disconnected and screws removed, the E-PL7 disassembly is complete.

Image via iFixit

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on iFixit takes a look inside the Olympus PEN E-PL7

Posted in Uncategorized

 

Tags: , , , , ,

Comments are closed.