RSS
 

How to: iFixit disassembles the Fujifilm X100T

22 Mar

Fujifilm X100T iFixit disassembly guide

Curious about what lies beneath the black (and maybe silver) panels of your Fujifilm X100T? Wonder no more, as iFixit has just published a disassembly guide. With nary more than a Phillips #00 screwdriver, tweezers and a heavy-duty spudger you’ll be well on your way to unlocking the mysteries of Fujifilm’s beloved mirrorless model. See some of the highlights here, and be sure to check out the full guide at iFixit.

Fujifilm X100T iFixit disassembly guide

An easy but important first step – removing the camera battery to ensure you make it through the disassembly process unscathed, whether or not your camera does. 


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

A nylon spudger is recommended to nudge the edge of the leather skin up, so that you don’t scratch the surface of the camera. From there, it can be carefully peeled back by hand.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

Starting on the bottom, you’ll put the screwdriver to work removing the screws securing the cameras side and bottom plates.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

After removing many tiny screws, the back panel can be pulled back from the camera body, revealing a scene that looks like this. The LCD and back panel can both be removed by gently pulling on the ribbons that connect them to the camera body.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

With a couple more screws removed, a silver frame covering the guts of the camera can be pulled back. You’ll use a plastic opening tool to pry the orange ribbon connecting this component the main part of the camera.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

After removing even more screws, the top panel can be lifted from the camera body, and detached using a plastic opening tool.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

Before long, you’ll find something that looks like this. You’re looking at the back side of the sensor and its associated circuitry, beyond which lies the lens.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

With the sensor out of the way, the next step is to remove the covering on the back of the lens.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

With that removed, you’ll remove some more screws to reveal a coiled spring. We were a bit puzzled by this one, but our friend Roger Cicala over at LensRentals had some insight, as usual. The X100T’s focus motor only drives the focusing element in one direction, so the spring works to push the element back the other way. Using this kind of system probably saves a bit of battery life and reduces size. You learn something new every day, right?


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

Here’s the X100T’s motherboard, freed from the body of the camera. iFixit recommends metal tweezers to pull the orange ribbon from the component and detach it.


All images courtesy of iFixit

Fujifilm X100T iFixit disassembly guide

If all goes well, your disassembly will result in something like this. Don’t worry, you can put the whole thing back together again by following the directions in reverse.


All images courtesy of iFixit

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on How to: iFixit disassembles the Fujifilm X100T

Posted in Uncategorized

 

Tags: , , ,

Comments are closed.