RSS
 

Fujifilm X-S10 initial review

15 Oct

Introduction

When you first catch a glimpse of the Fujifilm X-S10, your first thought might be ‘this is a Fujifilm?’ With a deep grip, more pronounced viewfinder ‘hump’ and a big dial that adjusts your shooting mode rather than the shutter speed, the X-S10 is something of a departure in design from previous midrange and high-end X-series cameras.

The company describes the X-S10 as a cross between the X-T30 and the X-H1: You get the guts from the former and the design and in-body image stabilization feature (in a new miniaturized form) from the latter. The camera is targeted toward users who may have Canon Rebels or lower-end Nikon DSLRs who want something a little more ‘familiar’ than a typical Fujifilm camera. And, with a price of $ 999 for the body – $ 100 more than the X-T30 – it’s not necessarily out of reach for that audience.

Key specifications

  • 26MP X-Trans BSI-CMOS sensor
  • 5-axis in-body image stabilization
  • On-sensor phase detection
  • 3″, 1.04M-dot fully articulating touchscreen
  • 2.36M-dot OLED electronic viewfinder
  • 30 fps burst shooting with crop (up to 20 fps without)
  • DCI and UHD 4K capture at up to 30p with F-Log support
  • External mic and headphone sockets
  • 325 shots per charge using LCD
  • USB Power Delivery support
  • Single UHS-I card slot
  • Wi-Fi + Bluetooth
Photo taken with a pre-production X-S10.
ISO 160 | 1/800 sec | F5.6 | XF 16-80mm F4 @ 19mm (28.5mm equiv.)

The X-S10 is very much a blend of the X-T30 and X-T4 in terms of specs. You get the same sensor, processor and performance of the X-T4, but with things like the EVF resolution and single, slower SD card slot on par with the X-T30.

You’ll be able to buy the X-S10 in three kits:

  • Body only: $ 999
  • Body + XF 18-55mm F2.8-4 R LM OIS lens: $ 1399
  • Body + XF 16-80mm F4 R OIS WR lens: $ 1499

Unlike most other Fujifilm cameras, the X-S10 only comes in black.

  • What’s new and how it compares
  • Body, handling and controls
  • Video
  • Initial impressions
  • Sample gallery
  • Specifications

What’s new and how it compares

Most of the features on the X-S10 are well-established at this point, so in this section we’re going to focus on a few things on this camera that you won’t find on other Fujifilm models.

New IBIS unit

Being a smaller camera, it’s no surprise that the X-T4’s IBIS unit wasn’t going to fit into the X-S10. So, the company designed a new one that is 30% smaller and lighter than the X-T4’s. A new motion sensor makes the unit more efficient, and the X-S10 has a redesigned circuit board that reduces power consumption.

There’s a very small difference in stabilization performance on the X-S10 versus the X-T4: just half a stop. It offers 6 stops of shake reduction on all unstabilized Fujifilm lenses save for the XF 16-55mm F2.8, which weighs in at 5.5 stops. All stabilized Fujifilm lenses vary from 5.5 to 6 stops, save for the XF 80mm macro, which offers 5 stops.

Refined auto and scene modes

Those who stick to auto and scene modes will gain a few new features. The X-S10 now has an ‘auto’ Film Simulation mode which will select between Provia (Standard), Velvia (Vivid) and Astia (Soft) depending on the scene. (Users can still manually select any of the Film Simulation modes offered.)

Photograph taken on a pre-production camera.
ISO 160 | 1/320 sec | F5.6 | XF 18-55mm F2.8-4 @ 55mm (82.5mm equiv.)

You can now use any AF area mode in Auto or Scene modes, from spot to zone to wide/tracking. Previous cameras were locked in the ‘wide’ mode.

Lastly, Raw shooting is now available in these modes, rather than being ‘stuck’ with JPEGs.

New joystick functionality

The joystick (officially known as the focus lever) works a bit differently on the X-S10 than on other Fujifilm models. Now, when you press it inward, it ‘punches in’ to the selected focus point. The clickable rear dials on other Fujifilm models operated this way by default. Simply nudging the stick in any direction allows you to select both the focus point, and you can also use the dials to select the focus mode (single-point, zone, wide/tracking).

You can change the functions of the joystick to a limited extent. Pushing inward can edit the focus area instead of punching in (or you can assign it to do nothing), while nudging it in a direction direction can only adjust the focus point (rather than also allowing you to change the focus mode with the dials). It can also be assigned to switch between detected faces if face detection is enabled.

Updated Film Simulation mode interface

Now, when you switch Film Sim modes, which you can do using the top-left dial or the menus, you can press the Q button to see a description of what each mode does, along with an image resembling a classic film box from the old days.

Compared to…

The closest competitors to the X-S10 in our opinion are the Nikon Z50, Olympus OM-D E-M5 III and Sony a6600. The Nikon is a bit cheaper, though it lacks the in-body image stabilization of the X-S10, E-M5 III and a6600. It’s also worth pointing out that the Olympus and Sony cost a few hundred dollars more than the Fujifilm. (Sony offers the a6400 for less, although again it doesn’t have stabilization.)

Fujifilm X-S10 Nikon Z50 Olympus E-M5 III Sony a6600
MSRP (body) $ 999 $ 859 $ 1199 $ 1399
Sensor res. 26MP X-Trans 21MP 20MP 24MP
Sensor size APS-C APS-C Micro 4/3 APS-C
Image stab. In-body Lens only In-body In-body
LCD type Fully articulating Tilting Fully articulating Tilting
LCD size/res 3.0″ / 1.04M-dot 3.2″ / 1.04M-dot 3.0″ / 1.04M-dot 3.0″ / 921k-dot
EVF res / mag
(equiv.)
2.36M-dot
0.62x
2.36M-dot
0.68x
2.36M-dot
0.68x
2.36M-dot
0.71x
Built-in flash Yes Yes No Yes
Burst w/AF 20 fps 11 fps 10 fps 11 fps
Video res. 4K/30p 4K/30p 4K/30p 4K/30p
(1.23x crop)
Log F-Log
(8-bit internal, 10-bit over HDMI)
No OM-Log
(8-bit)
S-Log
(8-bit)
Mic / headphone socket Yes / Yes (with adapter) Yes / No Yes / No Yes / Yes
SD card speed UHS-I UHS-I UHS-II UHS-I
Battery life (LCD) 325 shots 320 shots 310 shots 810 shots
Weight 465g (16.4oz) 450g (16.9oz) 414g (14.6oz) 503g (17.8oz)

Return to index


Body, controls and handling

As mentioned earlier, the overall design of the X-S10 is different than the majority of Fujifilm cameras, though it does resemble the much larger X-H1 from the front, and has similarities with the X-T200 to the left of the grip. Its DSLR-shaped body has a prominent EVF ‘hump’, on which you’ll find the built-in flash, along with a large handgrip.

The X-S10’s build quality is very solid, to the point where we wondered if it was weather-sealed (it’s not). The only parts that feel plasticky are the two unlabeled dials on the top plate and the door that covers the HDMI and USB ports. The handgrip is deep and well-designed, and gives you easy access to the front dial and nearby buttons. Controls on the rear plate are fairly sparse, but it feels like the right amount for the camera’s target audience.

Perhaps the most notable thing that differentiates the X-S10 from the X-T30 and X-T4 is that, instead of having dedicated dials for shutter speed and exposure compensation, there’s a traditional mode dial. While Fujifilm traditionalists may scream in horror, the switch to a mode dial is part of the company’s outreach to beginners and upgraders from DSLRs who seek something more familiar. Fujifilm hasn’t left more experienced users out in the cold: there are still plenty of dials and menus that can be customized.

The LCD and electronic viewfinder specs are unremarkable for this class. The former is 3″ in size and has a resolution of 1.04 million dots. The usual touchscreen features are here: you can tap to focus, change menu options and swipe through photos you’ve taken. The OLED viewfinder has 2.36 million dots, a magnification of 0.62x and a refresh rate of 100 fps: the same as on the X-T30.

The camera doesn’t have the clever ‘slider’ interface when you’re browsing through Film Simulation modes, and there aren’t any selfie modes like you’ll find on lower-end models like the X-T200.

The X-S10 uses the same NP-126S battery as the X-T30, and not the higher capacity NP-W235 pack found on the X-T4. The official CIPA battery life is 325 shots per charge when using the LCD (battery life numbers for the EVF were not available at time of publication). Unless you’re using Wi-Fi a lot, you’ll likely do quite a bit better. The camera can be charged and operated over its USB Type-C connector, though to do the latter you’ll need a USB PD compatible power source.

Return to index


Video

The X-S10’s video features are essentially the same as the X-T30’s, but they’re still worth a quick mention.

The camera captures oversampled DCI and UHD 4K video, at frame rates of 24p and 30p, respectively. Fujifilm estimates that you can record up to 30 minutes of 4K video, thanks in part to a new heat dispersion system that uses the magnesium alloy front plate as a heat sink. The X-S10 can also capture high speed Full HD video at up to 240 fps.

The magnesium alloy front plate is used as a heat sink to allow longer recording times

As in stills mode, the X-S10 can take advantage of its capable on-sensor phase detection system for face and eye tracking. The camera allows you to quickly switch between faces using the joystick. The in-body image stabilization system is along along for the ride, and shake can be reduced further with electronic IS (which adds a 1.1x crop).

The camera supports flat F-Log recording for preserving the option to color-grade later, but only captures 8-bit 4:2:0 video internally. For more flexible 10-bit 4:2:2 output, you’ll need an external recorder. When F-Log is in use, you can turn on the View Assist feature, which gives you a feel for what the footage will look like when graded. The X-S10 also features the Eterna profile, a favorite of video shooters.

One new feature that video shooters may appreciate is that the camera now counts up from zero seconds when recording, rather than counting down from whatever the capacity of the memory card is.

The X-S10 has 3.5mm mic socket, and adds a headphone connector if you attach the included USB dongle. Audio levels can be adjusted, and both wind and low cut filters are available.

Return to index


Initial impressions

I’m long been a fan of Fujifilm cameras and, if I wasn’t already invested in an older Canon system that admittedly gets a dwindling amount of use, I would consider switching over. I’ve always been happy with Fujifilm’s out-of-camera JPEGs and extensive lens collection, and it recent years the company has made great strides in terms of autofocus and video performance.

I’m also one of those people who still likes shooting with a DSLR. I like my optical viewfinder and the large grip that helps my somewhat shaky hands get a better hold on the camera. With the exception of the aging X-H1, Fujifilm’s X-series cameras just aren’t very ‘grippy’. And while many people like having the shutter speed dial on the top plate, I use it so rarely that I’d gladly trade it for a mode dial.

ISO 160 | 1/110 sec | F4.5 | Fujifilm 18-55 F2.8-4 @ 51mm equiv.
Photo by Jeff Keller

The X-S10 gives me what I’ve been waiting to see on a Fujifilm camera. I’ve got my large grip, a mode dial, in-body stabilization and many of the features from the X-T4, packed into a solid, portable body. I can get to both dials and the joystick without moving my hand, and the latter is in a better location (and feels better-built) than on the X-T30. Yes, a larger, higher resolution EVF would’ve been nice, but the 2.36M-dot panel on the X-S10 is typical for this class.

While I had only had a few days with the X-S10, a lot of how it will perform is a known quantity. The sensor, processor and AF system are the same as on the X-T4, which means great image quality and very respectable autofocus. The X-S10’s video specs surprised me given its price, and I can’t imagine that too many potential buyers of a $ 1000 camera want or need the additional capabilities of the more expensive X-T4.

ISO 160 | 1/480 sec | F4.5 | Fujifilm 18-55 F2.8-4 @ 83mm equiv.
Photo by Jeff Keller

While some Fujifilm traditionalists may scoff at the idea of a more ‘conventional’ X-series camera, I’m glad to see that the company broke the mold on the X-S10. For those folks (myself included) who want the shape and controls of a DSLR – and I believe there are many – it’s a really nice option to have.

Return to index


Sample gallery

Photos are from a pre-production camera. Fujifilm has requested that Raw images not be made available for download.

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_9084728490″,”galleryId”:”9084728490″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Return to index


Fujifilm X-S10 Specifications

Price
MSRP $ 999 (body only), $ 1399 (w/18-55mm lens), $ 1499 (w/16-80mm lens)
Body type
Body type SLR-style mirrorless
Body material Magnesium alloy
Sensor
Max resolution 6240 x 4160
Image ratio w:h 1:1, 3:2, 16:9
Effective pixels 26 megapixels
Sensor size APS-C (23.5 x 15.6 mm)
Sensor type BSI-CMOS
Color space sRGB, Adobe RGB
Color filter array X-Trans
Image
ISO Auto, 160-12800 (expands to 80-51200)
Boosted ISO (minimum) 80
Boosted ISO (maximum) 51200
White balance presets 7
Custom white balance Yes (3 slots)
Image stabilization Sensor-shift
Image stabilization notes Up to 6 stops with select stabilized lenses. 5-5.5 stops with other lenses.
CIPA image stabilization rating 6 stop(s)
Uncompressed format RAW
JPEG quality levels Fine, normal
File format
  • JPEG (Exif v2.3)
  • Raw (Fujifilm RAF, 14-bit)
Optics & Focus
Autofocus
  • Contrast Detect (sensor)
  • Phase Detect
  • Multi-area
  • Center
  • Selective single-point
  • Tracking
  • Single
  • Continuous
  • Touch
  • Face Detection
  • Live View
Autofocus assist lamp Yes
Digital zoom Yes
Manual focus Yes
Number of focus points 425
Lens mount Fujifilm X
Focal length multiplier 1.5×
Screen / viewfinder
Articulated LCD Fully articulated
Screen size 3
Screen dots 1,040,000
Touch screen Yes
Screen type TFT LCD
Live view Yes
Viewfinder type Electronic
Viewfinder coverage 100%
Viewfinder magnification 0.93× (0.62× 35mm equiv.)
Viewfinder resolution 2,360,000
Photography features
Minimum shutter speed 900 sec
Maximum shutter speed 1/4000 sec
Maximum shutter speed (electronic) 1/32000 sec
Exposure modes
  • Program
  • Aperture priority
  • Shutter priority
  • Manual
Built-in flash Yes
Flash range 7.00 m (at ISO 200)
External flash Yes (via hot shoe)
Flash X sync speed 1/180 sec
Continuous drive 20.0 fps
Self-timer Yes
Metering modes
  • Multi
  • Center-weighted
  • Average
  • Spot
Exposure compensation ±5 (at 1/3 EV steps)
AE Bracketing ±5 (2, 3, 5, 7 frames at 1/3 EV, 1/2 EV, 2/3 EV, 1 EV, 2 EV steps)
WB Bracketing Yes
Videography features
Format MPEG-4, H.264
Modes
  • 4096 x 2160 @ 30p / 200 Mbps, MOV, H.264, Linear PCM
  • 4096 x 2160 @ 25p / 200 Mbps, MOV, H.264, Linear PCM
  • 4096 x 2160 @ 24p / 200 Mbps, MOV, H.264, Linear PCM
  • 4096 x 2160 @ 23.98p / 200 Mbps, MOV, H.264, Linear PCM
  • 3840 x 2160 @ 30p / 200 Mbps, MOV, H.264, Linear PCM
  • 3840 x 2160 @ 25p / 200 Mbps, MOV, H.264, Linear PCM
  • 3840 x 2160 @ 24p / 200 Mbps, MOV, H.264, Linear PCM
  • 3840 x 2160 @ 23.98p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 240p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 120p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 60p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 50p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 30p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 25p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 24p / 200 Mbps, MOV, H.264, Linear PCM
  • 1920 x 1080 @ 23.98p / 200 Mbps, MOV, H.264, Linear PCM
Microphone Stereo
Speaker Mono
Storage
Storage types SD/SDHC/SDXC slot (UHS-I supported)
Connectivity
USB USB 3.2 Gen 1 (5 GBit/sec)
USB charging Yes
HDMI Yes (micro-HDMI)
Microphone port Yes
Headphone port No
Wireless Built-In
Wireless notes 802.11b/g/n + Bluetooth
Remote control Yes (via smartphone)
Physical
Environmentally sealed No
Battery Battery Pack
Battery Life (CIPA) 325
Weight (inc. batteries) 465 g (1.03 lb / 16.40 oz)
Dimensions 126 x 85 x 65 mm (4.96 x 3.35 x 2.56)
Other features
Orientation sensor Yes
Timelapse recording Yes
GPS None

Return to index

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm X-S10 initial review

Posted in Uncategorized

 

Nikon Z6 II and Z7 II: what you need to know

15 Oct

Intro

The Nikon Z6 II and Z7 II are the first time the company has used ‘Mark II’ branding and it makes sense: these are relatively subtle refreshes of already established cameras.

However, while the overall specs of the cameras don’t change dramatically, the updates and improvements address a number of key criticisms of the original models and will start to add up for some users. Both the Z6 and Z7 have benefited from fairly substantial firmware updates since their release, but the biggest changes in the Z6/7 II come courtesy of different hardware.

Dual card slots

One of the most obvious changes to the Mark II models is the provision of dual card slots. Both cameras gain a UHS-II SD card slot in addition to the XQD/CFexpress Type B socket. As you’d expect, there are options to have the two slots provide simultaneous backup, overflow capability or Raws to the primary card and JPEGs to the second. There’s no option to record stills to one card and video to the other.

The change won’t make a lot of difference to some people, but it may make the Z6 and Z7 II a lot more practical for some workflows.

Full vertical grip

Another much noted absence on the original Z cameras was the option for a grip with duplicate controls for portrait orientation shooting. The Z6 and Z7 do have a grip available, but it’s a simple battery grip with no duplicate controls.

The MB-N11 ($ 399) is a proper vertical grip, which duplicates the main control dials and AF positioning joystick for vertical shooting. The grip displaces the Z6/7 II’s in-body battery, effectively providing space for one additional battery. The outermost battery is hot-swappable, meaning you can replace it on-the-fly while recording video, without having to pull the whole battery tray out or stop recording. There’s an additional USB type C socket on the grip, meaning you could power the camera from one socket while sending data over the one on the camera body.

Both cameras bodies are identical in dimension to their predecessors, though, so can also use the older MB-N10 control-less battery grip or any other cage, bracket or accessory you might have for one of the older models.

Battery

The new cameras use the latest version of Nikon’s EN-EL15 battery. The EN-EL15c is a higher capacity version of the existing type ‘b’ battery and, like that unit, can be charged over USB. The cameras will work with all previous EN-EL15-pattern batteries but for best performance you’ll want one of the latest versions.

The battery is higher capacity but the dual processor designs mean both cameras deliver between five and ten percent mode shots. The Z6 II is rated at 410 shots per charge with the LCD, 340 through the viewfinder, while the Z7 II offers 420 and 360, respectively. Energy saving modes boost all these figures by a further 5 percent on the Z7 II and around 14 percent on the Z6 II.

Dual processors: faster shooting / more shots

Under the skin, the biggest change in the new Mark II cameras is the move to dual Expeed 6 processors. This doubling of the cameras’ processing power is what allows the Z6 II’s shooting rate to be expanded up to 14 frames per second from 12, while the Z7 II hits 10 fps, rather than nine. Note that these maximum framerates are only available if you’re shooting 12-bit Raw and using a single AF point.

The added processing power helps both cameras clear their buffers much faster, more than trebling the number of Raw files you can shoot in a burst, in some instances.

AF improvements

The new cameras have received a major update to the way their autofocus works, with human or animal eye/face detection now available in the cameras’ Wide area AF modes. The significance of this is that it lets you limit the zone of face/eye detection to the part of the frame you want to focus on, making it easier to select your subject.

Nikon says this feature is contingent on the additional processing power supplied by the dual processors, and so is unlikely to be extended to the original Z6 and Z7 via firmware. The company also claims that overall AF performance has been improved, specifically in terms of stickiness, when it comes to focus tracking.

The low-light capabilities of the cameras’ focus systems are also improved, with the Z7 II capable of achieving AF down to –3EV in standard AF mode and the Z6 II reaching –4.5EV with an F2.0 lens. This is a one stop improvement over the existing models and comes without engaging the slower, low-light AF mode for shooting in extreme low light.

Viewfinder improvements

The cameras continue to use the same 3.69M dot OLED viewfinder panels, but we’re told that blackout times between exposures have been improved.

Nikon also says the response lag of the finders have been improved but it hasn’t provided a number for this claim. It does point out that the EVF optics, which provide an impressive 0.8x magnification, are made from Nikon glass.

USB power

Another change from the older models is the ability to operate the cameras using USB power. A modern USB-C power supply should provide sufficient current (Nikon says the source must use a USB-C to USB-C cable). This comes on top of the ability to charge the camera over USB, and opens up the possibility of extended video or timelapse shoots.

Video updates internal

Nikon has made a series of improvements on the video side of things. The most significant for people using internal capture is the ability to shoot 60p 4K footage. The Z7 II will capture the higher frame rate footage from 93% of the width of the sensor, and will need to line-skip or pixel-bin to do so. The Z6 II instead uses a native 3840 x 2160 crop from the middle of its sensor, which is essentially an APS-C (‘DX’ in Nikon speak) region. Z6 II users will need to wait until February 2021, when 60p capability will be added as part of a free update.

60p can only be recorded internally, possibly held back by the cameras’ HDMI sockets.

Video updates external

There are a couple of significant improvements for anyone capturing video using an external recorder, too. The first is that, in addition to N-Log output, the Mark II cameras gain the ability to output ready-to-view Hybrid Log Gamma footage for viewing on HDR TV sets. This provides a way to deliver HDR content but it’s worth noting that Panasonic’s S5 can do this without the need for an external recorder. Both cameras will be limited to 4K/30p output.

The both cameras will have a paid upgrade option to output Raw video streams. In the case of the Z6 II, this will be like-skipped 4K from most of the width of the sensor, on the Z7 II will output Full HD (1080p) Raw from the full sensor area or 4K from an APS-C crop. Initially, there will be support for the Atomos Ninja V, which encodes the steam as ProRes RAW. In February 2021 a further update is promised, adding compatibility with Blackmagic recorders for encoding as Blackmagic Raw, opening up the ability to use Raw footage with DaVinci Resolve.

Minor updates

As well as the larger updates, both cameras also gain a series of small tweaks and improvements that Nikon is bringing to its latest models.

These include the option of exposure times as long as 900 seconds (15 minutes) rather than being limited to 30 seconds. The cameras also gain the ability to create videos from interval timer mode (which lets you also save JPEGs or Raws of every frame), rather than just from the simpler timelapse mode. These are both features we first saw on the D780.

Video shooters are also likely to appreciate the new (and overdue) option to reverse the direction of the focus ring when manual focusing. All Z-mount lenses are focus-by-wire, so can be programmed to respond in the same direction as most other brands, or remain Nikon-like, depending on your preference. It’s unclear whether this feature will come to the original Z6 and Z7 via firmware (but we hope so).

What’s the same?

The cameras’ ergonomics and handling are fundamentally unchanged, which we think is a welcome decision. Nikon has a history of putting well-designed hand grips and sensibly-positioned control dials into its medium / high-end cameras, and the Z6 and Z7 II are (literally) no different.

A few small adjustments have been made to the user interface though, including the addition of ‘Wide + Human Face/Eye detect’ and ‘Wide + Animal Face/Eye detect’ to the ‘i‘ quick menu, but most of the UI remains the same.

Overall

The Z6 and Z7 II are solid mid-life updates to the original Z6/7 which, on the face of it, make helps the Nikon Z-mount look a little more fresh alongside the latest cameras from Canon, Sony and Panasonic which have been released in the past two years. While some Z6/7 owners will find little reason to upgrade, these new Mark II versions should prove more attractive to some of Nikon’s DSLR customers who’ve been waiting to make the switch to mirrorless.

We can’t say yet how well the Z6/7 II compare to the best of their peers in terms of autofocus or video performance, but, on paper at least, they appear likely to to be competitive. An effective doubling of processor power opens up of potential for performance tweaks via firmware, too, going into the future.

So should you buy a Z6 or Z7 II? As always, that depends (and we’ll be breaking down the reasons for and against in another article coming soon). Upgrading from an original Z-series model will be unusually painless – they’re physically identical, and the interface is all-but unchanged. If you don’t need the extra power (or the extra card slot) and you’re not much of a video shooter, it’s a harder question to answer, especially given that the original Z6 and Z7 are continuing in Nikon’s product line, and are likely to get cheaper in the coming months.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikon Z6 II and Z7 II: what you need to know

Posted in Uncategorized

 

11 Things to Experiment With When Starting Out in Digital Photography

15 Oct

The post 11 Things to Experiment With When Starting Out in Digital Photography appeared first on Digital Photography School. It was authored by Megan Kennedy.

Starting out in digital photography can seem a little daunting. With so many avenues to explore, it can be hard to pinpoint exactly where to begin. Here are 11 things to experiment with when first taking up photography.

experiment when starting out in digital photography wattle flower
Canon 5D Mark II | Canon EF 50mm f/1.8 II with extension tubes | 1/250 sec | f/7.1 | ISO 100

1. Semi-automatic and manual modes

When first getting started in photography, it can be tempting to switch a camera over to Auto mode and forget about making manual adjustments, especially when starting out in digital photography. Why make manual adjustments when the camera can do it all for you, right?

The truth is that shooting with Auto mode sacrifices experience, flexibility, and control. If you can avoid Auto mode, you should.

Now, the prospect of shooting in Manual can prove overwhelming to start with. Fortunately, there are often semi-automatic modes available in-camera to bridge the gap between Manual and Auto.

Shutter Priority allows you to alter shutter speed while the camera automatically adjusts the aperture. Aperture Priority is similar, but it allows you to change the aperture while the camera adjusts the shutter speed instead.

experiment when starting out in digital photography spider's web
Canon 5D Mark II | Canon EF 50mm f/1.8 II with extension tubes | 1/125 sec | f/1.8 | ISO 800

Shutter Priority and Aperture Priority facilitate a creative approach to photography while allowing the camera to manage some of the load in maintaining a decent exposure. This balance of functionality allows you to experiment, which in turn helps you develop a good sense of the right settings for any circumstance.

And after becoming familiar with the dynamics of semi-automatic modes, graduating to Manual is a lot more fluid, when you can finally take full advantage of the camera as a creative tool.

2. ISO

ISO is a little misunderstood; there’s a great video about it here. But in basic terms, ISO is a setting that brightens an image in-camera. As the ISO value is increased, images grow progressively lighter. It’s a function that is useful for photography in darker environments.

However, raising the ISO value also increases noise, which can compromise the quality of a digital image.

Experimenting with ISO will give you a sense of how your images will turn out in low-light situations. By becoming familiar with ISO and its trade-offs, you can learn to anticipate the outcome of a photograph, maintaining as strong image quality as possible in a variety of environments.

3. Metering modes

In-camera metering is how a camera determines the appropriate exposure for a given situation. Metering modes refer to the method the metering system uses to evaluate a scene.

starting out in digital photography metering modes

Different metering modes allow photographers to select the ideal settings for a particular situation. For example, Matrix metering (Nikon)/Evaluative metering (Canon) measures the light intensity at several zones in a scene, then combines the results to find the average settings for the exposure. Spot metering, on the other hand, measures only a very small portion of a scene to determine exposure settings.

While Matrix/Evaluative metering is useful for situations with evenly-distributed tones, Spot metering is ideal for metering in high-contrast scenarios. Experimenting with metering modes exposes a user to effective ways of working in different lighting conditions, leading to greater creative and technical control.

4. White balance

Different lighting conditions can impact the color temperature of the overall photo. For example, fluorescent lights can generate a different color cast than the afternoon sun. To rectify this, many digital cameras offer a function that balances the whites in a scene in order to make images appear more natural.

Experimenting with preset or custom white balance modes can help achieve a more aesthetically pleasing result in-camera. Although white balance can be set to Auto, the camera doesn’t always get it right. Trying out custom or preset white balance functions prepares a photographer for tricky lighting situations down the track.

5. Manual focus

As a beginner photographer, achieving sharp images can be a challenge. Although a camera’s autofocus function is quick and relatively easy to use, shooting with manual focus can sometimes be the difference between successful and unsuccessful images.

Often, manual focus is much more effective than autofocus in low-light and low-contrast conditions, and shooting through objects (like glass or fencing) with autofocus engaged can be a frustrating experience. The autofocus system may even get confused when the user is trying to focus on a fast-moving subject.

starting out in digital photography manual focus
Canon 5D Mark II | Canon EF 50mm f/1.8 II with extension tubes | 1/125 sec | f/4.0 | ISO 800

While autofocus may be convenient in some situations, switching to manual focus can play a vital role in creating quality images. Experimenting with manual focus when starting out in digital photography builds and reinforces technical experience. Using manual focus also fosters a greater awareness of camera capabilities and generates a more diverse range of images.

6. Composition

Throughout the history of visual art, concepts have emerged to aid in the formulation of impactful imagery. Composition refers to the organization of visual elements within an artwork. Whether it’s a painting, a photograph, or a sculpture, all art hinges on composition.

Experimenting with composition allows photographers in the early stages of their practice to arm themselves with helpful knowledge that has been passed down by artists. By experimenting with compositional elements (such as perspective, the rule of thirds, and leading lines), new photographers can quickly start to identify and utilize key visual aspects of a scene.

7. Abstraction

Wikipedia defines abstract photography as “a means of depicting a visual image that does not have an immediate association with the object world and that has been created through the use of photographic equipment, processes, or materials.”

Basically, abstract photographers generate subject matter that prioritizes aesthetic experience over conventional discernibility.

starting out in digital photography abstraction
Left: Canon 5D Mark II | Canon EF 24-105mm f/4L IS USM | 1/250 sec | f/8.0 | ISO 100
Right: Canon 5D Mark II | Canon EF 24-105mm f/4L IS USM | 1/250 sec | f/6.3 | ISO 100

Abstraction is a unique facet of photography in that it encourages a more experimental approach to the photo-making process.

By taking advantage of abstraction, those starting out in digital photography are free to experiment beyond the conventional notion of a photograph. This experimentation will inevitably inform other areas of a new photographer’s practice, building experience and developing individual perspective.

8. Subject matter

There is nothing wrong with specializing, but tackling a range of different photographic fields expands your photographic experience. And it can also completely alter the way you approach your preferred subject matter.

For example, landscape photography can reveal opportunities for beautiful outdoor portraits. Abstract photography can impact the way motion is expressed in action shots. Street photography can help you develop an eye for subtle photographic opportunities. Macro photography will help you notice small details.

In short, experience with different photographic subjects can feed into one another in surprising ways. Experimenting with a variety of subjects is a solid means of developing a well-rounded photographic approach.

9. Perspective

One of the reasons photography is so effective is because it challenges both the photographer’s and the viewer’s comprehension of the world. However, it can be easy to get into the habit of photographing subjects from the same eye-level viewpoint, especially when starting out.

starting out in digital photography plane
Canon 5D Mark II | Canon EF 24-105mm f/4L IS USM | 1/160 sec | f/9.0 | ISO 100

We all know the saying, “Show, don’t tell.” Moving around with the camera is one of the simplest ways to convey a unique photographic experience. You can shoot from above your subject, below your subject, or off to the side.

And by experimenting with different camera positions, you explore the nature of photography and the world we live in. By photographing from interesting or unusual perspectives, the physicality of the image-making process is emphasized, providing a unique insight into the world through the experience of the photographer.

10. Post-production

Getting it right in-camera is ideal, but sometimes a bit of work in post-production is necessary. Becoming familiar with digital post-production techniques can be very handy, especially because even minor adjustments can create a positive impact. In addition, editing can affect your overall approach to digital image-making by revealing photographic techniques that work well or need improvement.

Photoshop is a great tool for editing images, but there are also free applications such as GIMP to make use of. With practice, you can develop a sense of how to bring the best out of a photograph.

11. Accessories

There are plenty of ways to expand your creative image-making through economical accessories.

For example, extension tubes are a cheap way of getting into macro photography. Filters can significantly alter the outcome of a photograph. And a budget tripod will help you achieve sharp images. Renting or buying second-hand is also a viable option. In some cases, digital photographers can even make use of old lenses designed for film cameras.

Investing in economical accessories allows new photographers to experiment with engaging techniques without breaking the bank.

starting out in digital photography flower
Extension tubes are a cheaper alternative to a macro lens. Canon 5D Mark II | Canon EF 50mm f/1.8 II with extension tubes | 1/2000 sec | f/2.5 | ISO 500

Starting Out in Digital Photography: Conclusion

While there are plenty of considerations to take into account when starting out in digital photography, experimenting with technical settings, creative approaches, and accessories gives you a strong foundation for future photography endeavors.

And this allows for a more comprehensive skillset and well-developed creative instincts.

Now over to you:

Have you tried experimenting with any of these items? What are you going to experiment with first? Leave a comment and let us know!

The post 11 Things to Experiment With When Starting Out in Digital Photography appeared first on Digital Photography School. It was authored by Megan Kennedy.


Digital Photography School

 
Comments Off on 11 Things to Experiment With When Starting Out in Digital Photography

Posted in Photography

 

DJI releases RS 2, RSC 2 3-axis gimbals with higher payloads, new shooting modes and more

15 Oct

DJI has revealed a new pair of gimbals that are successors to the company’s popular Ronin-S and Ronin-SC stabilization systems. The new DJI RS 2 and RSC 2 are ‘redesigned and reimagined’ three-axis handheld gimbals for filmmakers of all types.

DJI RS 2

The DJI RS 2 is the successor to the Ronin-S and is made to be used with DSLR and compact cinema camera setups up to 4.5kg (10lbs). Despite the heavy payload, DJI claims the new RS 2 features up to 12 hours of battery life, as well as a new quick-charge function built into the handle for quickly adding two hours of use with just 15 minutes of charging.

DJI is using its ‘newly optimized’ Titan Stabilization Algorithm for driving the onboard brushless motors, which it claims ‘reduces the need for manual user input while compensating for user movement and optimizing the gimbal tilt and angle.’ Also new is a SuperSmooth mode that’s specifically tuned to compensate for movement when using longer focal lengths up to 100mm.

Like its predecessor, the RS 2 features axis locks for secure transport and a new dual-layer mounting plate that’s compatible with both Arca-Swiss and Manfrotto standards.

A new 1.4” color touchscreen on the rear of the RS 2 serves as a way to cycle through settings, camera data or even a live feed from the camera. Two onboard RSA ports can double as NATO ports, enabling the RS 2 to be used in conjunction with other DJI and third-party accessories, including jibs, car attachments, sliders, grips and remote controllers.

DJI RSC 2

Just as the the DJI RS 2 is a successor to the Ronin-S, the RSC 2 is a successor to DJI’s Ronin-SC. The updated gimbal is constructed of steel and aluminum, which work to increase rigidity while reducing the overall weight of the unit compared to the Ronin-SC by 35%. It also has a smaller physical footprint with a folded size of 180mm x 190mm (7” x 7.5”) — roughly the size of an A5 sheet of paper.

Despite the reduction in both size and weight, the RSC 2 features an increased maximum payload of 3kg (6.6lbs) over the Ronin-SC. DJI notes this makes it more than strong enough to carry a combination such as the Panasonic S1H with a 24–70mm lens attached.

It too features DJI’s improved Titan Stabilization Algorithm, dual-plate mount system and OLED screen, albeit slightly smaller at just 1”.

Other features and accessories

In addition to new hardware, both the RS 2 and RSC 2 have received a new pre-programmed movement mode — Time Tunnel. This new option is an inception-esque mode that performs a 360º roll while capturing a hyperlapse. This mode is in addition to other pre-programmed modes such as Flashlight, One-Tap Portrait Mode, Panorama, Roll 360, Timelapse and more.

Ronin RSC 2

The two gimbals also include an array of accessories for building out the gimbals to fit your needs. Optional accessories include a cheese plate, Focus Wheel, 3D Focus System, Twist Grip Dual Handle, RavenEye Image Transmission System, Tethered Control Handle, counterweight systems and more.

The DJI RS 2 is available starting today for $ 849 USD as a standalone unit and $ 999 in its Pro Combo configuration. The DJI RSC 2 is available starting today for $ 849 USD as a standalone unit and $ 999 in its Pro Combo configuration. Units are available through DJI’s online store and authorized DJI retailers.

Press release:

DJI’s Ronin Series Grows Stronger, Lighter, and Smarter with New DJI RS 2 and RSC 2 Gimbals

Two Stabilization Systems Offer Reworked Designs and New Creative Functions to Become Workhorses for Filmmakers and Content Creators

October 14, 2020 – DJI, the global leader in civilian drones and creative camera technology, today expands the legacy of the highly popular and prestigious DJI Ronin series, by introducing the rebranded DJI RS 2 and DJI RSC 2. Redesigned and reimagined, both systems offer the filmmaking and content creation community an extremely robust, versatile, and professional 3-axis camera gimbal for their various needs. DJI RS 2 brings added strength and agility to creators using heavier camera systems such as DSLR and compact cinema cameras. At the same time, DJI RSC 2 was created to be more portable, meeting the needs of mirrorless and more compact camera operators.

“DJI’s first Ronin-S and the original Ronin-SC created so much excitement when they launched that we immediately went back to the drawing board to figure out how to make our products even better,” said Paul Pan, Senior Product Line Manager. “Just like with the first version, we took time to research how our professional customers use their Ronin products and what new features they wanted in the next generation of a handheld gimbal. Yet again, the result is the culmination of user feedback, years of design and development, and significant advancements in stabilization technology. Now we are excited to showcase two new filmmaking tools designed to meet the needs of a wide array of filmmakers. From cinema cameras to mirrorless systems, we have a solution for you.”

DJI RS 2: Masterfully Crafted

Considering a tremendous amount of feedback from professional operators, DJI RS 2 incorporates carbon fiber in vital structural components, reducing weight down to 1.3 kg (2.86 lbs) while remaining highly durable. Pushing the innovation of single-handed gimbal technology even further, DJI RS 2 now supports a tested dynamic payload of 4.5 kg (10 lbs) for creators to use heavier camera and lens combinations while still achieving up to 12 hours of battery life. A new quick-charge function directly to the battery handle has been added for urgent situations, providing an extra two hours of battery life with just a 15-minute charge.

DJI RS 2 continues pushing gimbal technology forward with the ability to support heavier payloads while capturing ultra-smooth cinematic footage. Based on years of experience developing predictive technology, a newly optimized Titan Stabilization Algorithm reduces the need for manual user input while compensating for user movement and optimizing the gimbal tilt and angle. Additionally, a new SuperSmooth mode provides another level of camera stability, especially for compensating longer focal length lenses of up to 100mm.

Simple to set up, easy to operate, and highly customizable, DJI RS 2 was created to allow filmmakers to adapt their system to their filming needs while feeling confident it will easily integrate into their workflow. Axis locks enable easier transportation and balancing, while a dual-layer camera mounting plate is compatible with both the Arca-Swiss and Manfrotto standard. A fine-tune balancing knob allows for even more precise balancing of the camera payload. The built-in 1.4” color touchscreen can display camera data, gimbal settings, or a live feed from the camera. Supporting 11 different languages, the ultra-bright screen can also initiate key functions such as ActiveTrack and intelligent shooting modes. The built-in front dial above the trigger allows for precise focus control and complements a DJI Focus Wheel mounted on the RSA port to create two-channel focus and zoom.[] DJI RS 2 also turns into a versatile tool that can be attached and used with other systems such as jibs, car attachments, and sliders. Two RSA ports double as NATO ports so that users can mount accessories and attachments such as grips and a remote controller.

DJI RSC 2: Filmmaking Unfolds

A completely new and portable folding design makes DJI RSC 2 easy for creators to carry everywhere without adding additional weight to the gear list. Additionally, the folding design provides creative ways to use the gimbal such as vertical filming without additional accessories, as well as a new Briefcase mode, where the main gimbal arm can be loosened and slung forward to provide unique shooting angles. Durable materials like steel are used on vital and frequently used components, while lightweight materials such as aluminum reduce overall weight. DJI RSC 2 weighs in at 1.2 kg (2.65 lbs), nearly 35% less than the original Ronin-S, and has a folding footprint of 180×190 mm, the same size as a sheet of A5 paper. The built-in battery offers an impressive 12 hours of battery life and – like DJI RS 2 – the new quick-charge function directly to the battery handle has been added for urgent situations.

DJI RSC 2 remains lightweight and portable, featuring stronger motors to support a tested payload of up to 3 kg (6.6 lbs). This increased dynamic payload supports popular mirrorless cameras along with heavier combinations like the Panasonic S1H and a 24-70mm lens. Using the same advanced technology as DJI RS 2, the newly optimized Titan Stabilization Algorithm generates a new level of stability – smoothing out fine details in conjunction with the motorized gimbal for some of the most advanced stabilization on the market. DJI RSC 2 is compatible with a wide array of camera models so users can get the most out of the system. Axis locks enable easier transportation and balancing, while a dual-layer camera mounting plate is compatible with both the Arca-Swiss and Manfrotto standard. A 1” built-in OLED screen displays camera data with the ability to adjust settings directly.

Multifaceted Gimbals Supported by an Advanced App and Accessories
DJI RS 2 and RSC 2 were designed to expand beyond single-handed stabilization into tools that can be customized with additional accessories to achieve the desired shot. These accessories include a cheese plate, Focus Wheel, 3D Focus System, Twist Grip Dual Handle, RavenEye Image Transmission System, Tethered Control Handle, counterweight systems, and more.[] For remote operation, both DJI RS 2 and DJI RSC 2 can use ActiveTrack 3.0 when the RavenEye Image Transmission System is connected, sending a 1080p/30fps low-latency feed to a mobile device using the Ronin app from up to 200 meters away.

Vital features and functions can now be controlled and adjusted over long distances with the Ronin app such as gimbal movement using the virtual joystick and Force Mobile, where the gimbal mimics the mobile device’s movement. For solo operators using manual-focus lenses, the 3D Focus System uses state-of-the-art TOF sensors mounted above the camera to provide autofocus. This enables a single shooter to capture smooth and cinematic footage using a manual lens, without relying on a second camera operator or focus puller.

Pre-Programmed Movements and Features That Make Stories Come to Life

DJI RS 2 and RSC 2 expand on their predecessors’ suite of creative modes, movements, and features with tools to help capture content that stands out, including:

  • *New* Time Tunnel: The system performs a 360-degree roll while capturing a hyperlapse, adding a level of creativity to footage.[]
  • Flashlight: The system tilts the camera all the way forward so users can grip the base like a flashlight.
  • One-Tap Portrait Mode: The gimbal quickly orients the camera into vertical shooting for professional-level social media content.
  • Panorama: After configuring sensor and focal length, choose a start and stop point for panoramas up to gigapixel size.
  • Roll 360: The gimbal enters into the Flashlight position and rolls the camera system 360 degrees.
  • Timelapse: This classic feature shows subtle changes over durations of your choosing.

DJI Care Refresh
DJI Care Refresh is now available for both DJI RSC 2 and RS 2. For an additional charge, DJI Care Refresh offers comprehensive coverage as well as up to two replacement units within one year. Receive your replacement even sooner with DJI Care Refresh Express. DJI Care Refresh also includes VIP after-sales support and free two-way shipping. For a full list of details, please visit https://www.dji.com/service/djicare-refresh.

Price and Availability

DJI RS 2 and DJI RS 2 are available for purchase today from authorized retailers and on www.store.dji.com. Each product offers purchase options for a standalone gimbal and a combination pack that includes additional accessories. The standalone DJI RS 2 is available for the retail price of $ 849 USD, and the standalone DJI RSC 2 is available at the retail price of $ 499 USD. The Pro Combo includes additional accessories such as a phone holder, Focus Motor, RavenEye Image Transmitter, dedicated carrying case, and more. The DJI RS 2 Pro Combo is priced at $ 999 USD, and the DJI RSC 2 Pro Combo is priced at $ 739 USD. Full details on this can be found below.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DJI releases RS 2, RSC 2 3-axis gimbals with higher payloads, new shooting modes and more

Posted in Uncategorized

 

Introducing the New dPS Editor and Content Manager, Jaymes Dempsey

15 Oct

The post Introducing the New dPS Editor and Content Manager, Jaymes Dempsey appeared first on Digital Photography School. It was authored by Darren Rowse.

Introducing the New dPS Editor and Content Manager, Jaymes Dempsey

We’ve had a quiet change of guard in the editorial role here at dPS. And the reason it’s been so smooth is that our new editor Jaymes Dempsey will be familiar to you as one of our current writing team members. He has been an understudy to Caz for a while now and has easily slipped into the editing role. Before I introduce you to Jaymes, a quick word from Caz

From Caz:

All the changes taking place on a worldwide scale have led me to do a lot of soul searching (as I’m sure it has for many). This exploration has made me realise I need to be focussing on my creative pursuits as they make my heart truly sing. While I have enjoyed being the Managing Editor of dPS and interacting with you all, I’m looking forward to continuing my traveling around Australia and creating as I go.

You are now in great hands with Jaymes Dempsey and the dPS team. I wish Jaymes all the best in his new role and I wish all of you the best on your photography journey!

A very big thanks to Caz for the energy she brought to the team and her role. We wish her all the best for her adventures around Australia and will always look forward to her latest updates.

About Jaymes Dempsey

Jaymes is a photographer and writer from Ann Arbor, Michigan. At 13, Jaymes decided he wanted to become a bird photographer; at 14, he decided that macro photography was the better option; now, over a decade later, he’s passionate about pretty much all photography, no matter the genre.

That said, Jaymes loves getting outdoors with his camera, and nature photography of all sorts (including bird, macro, and landscape photography) will always hold a special place in his heart. He also spends his evenings photographing downtown Ann Arbor, where you can often find him struggling to lug around an unreasonably large tripod and camera setup.

But Jaymes isn’t just passionate about photography; he also loves to help other photographers learn and grow. Jaymes believes that everyone is capable of being a great photographer, no matter their background or equipment, which is why he continues to do what he does!

Jaymes brings years of writing, editing, and content management experience to the table. He runs his own instructional photography blog, and his work has been published in popular photography magazines across the internet. In fact, it was Digital Photography School that first inspired Jaymes to starting writing about photography, and he has spent the last several years as a regular dPS contributor, which is one of the many reasons he is delighted to be coming aboard as Editor and Content Manager!

Jaymes is thrilled to take on a larger role within dPS, and he looks forward to interacting with the wonderful community that is Digital Photography School.

We hope you join us in welcoming Jaymes into his new role.

The post Introducing the New dPS Editor and Content Manager, Jaymes Dempsey appeared first on Digital Photography School. It was authored by Darren Rowse.


Digital Photography School

 
Comments Off on Introducing the New dPS Editor and Content Manager, Jaymes Dempsey

Posted in Photography

 

Deals: Sony USA is offering steep discounts—including all-time lows—for select cameras, lenses and more

15 Oct

Sony has announced that throughout the remainder of this week, it is offering a series of discounts across a number of its popular Sony Alpha cameras and lenses, as well as bundles, the RX lineup and accessories. The deals, some of which have dropped certain gear to their lowest non-grey-market price, are taking place in the United States across all official Sony retailers, including Adorama, Amazon, B&H, Best Buy, Samy’s Camera and others.

While Sony has posted a full rundown of all the sales currently available, we’ve rounded up a few of the best deals from the bunch (links go to their respective reviews/product pages on DPReview):

  • Sony a9 (body only) — $ 3,000 ($ 1,000 off retail, ~$ 500 recent street prices)
  • Sony a7R IV (body only) — $ 3,000 ($ 500 off retail, ~$ 300 off recent street prices)
  • Sony a7R III (body only) — $ 2,300 ($ 500 off retail, ~$ 300 off recent street prices)
  • Sony ?6000 kit with 16–50mm & 55–210mm lenses — $ 700 ($ 300 off retail)
  • Sony FE 16–35mm F2.8 GM — $ 2,000 ($ 200 off retail, same for street prices)
  • Sony FE 24–70 mm F2.8 GM — $ 2,000 ($ 200 off retail, same for street prices)
  • Sony VARIO-TESSAR T* FE 16–35mm F4 ZA OSS — $ 1,100 ($ 250 off retail, ~$ 150 off recent street prices)
  • Sony FE 70–200mm F2.8 GM OSS — $ 2,400 ($ 200 off retail, same for street prices)
  • Sony RX100 III — $ 650 ($ 100 off retail, roughly the same price as other recent deals)

There are other bundles, action cams, accessories and more on sale worth checking out. Head on over to Sony USA’s website for the complete list.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Deals: Sony USA is offering steep discounts—including all-time lows—for select cameras, lenses and more

Posted in Uncategorized

 

Vivo shows off award-winning concept smartphone with removable pop-up camera

15 Oct

As the comments under yesterday’s iPhone 12 articles can attest to, there are still consumers who don’t appreciate seeing a notch at the top of their mobile devices. To rid the world of large notches, some companies have shrunk the front-facing to the size of a ‘hole punch’ design; others have managed to hide it almost entirely beneath the display. But electronics manufacturer Vivo is determined to take an entirely different approach, if its new Red Dot Award-winning IFEA concept smartphone is anything to go by.

Based on the renderings provided by Vivo, this concept smartphone would feature not only a pop-up camera — something other manufacturers have already done — but one that can be removed and used independently of the phone. Again, this is a concept phone, so it’s very possible we’ll never see a real-world device with this camera setup, but even at the concept stage, it doesn’t take much to see how poorly such a design could turn out, despite the obvious benefits.

Such a design would not only clear the main screen from any notches or holes, but also make it possible to hold or mount the camera array in any direction. This would mean you could always use the higher-res camera modules within the array and also open up the possibility of using your phone’s screen as a live view display when taking photos. There’s also the possibility you could attach the camera array to additional accessories, such as flash modules, battery packs or even wearable accessories, not unlike the dozens of GoPro mounts you can purchase.

Of course, all of that becomes irrelevant and incredibly expensive if you manage to lose the detachable camera array — something that seems all too likely given the size of of the array shown in the mockups.

The renderings also show off a triple-camera array on the back of the smartphone, with specs suggesting there could be a 64MP camera module with a 15mm-26mm focal length range.

Only time will tell whether or not we see an actual device from Vivo that uses this technology, but for now it’s a concept and little more.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Vivo shows off award-winning concept smartphone with removable pop-up camera

Posted in Uncategorized

 

The new Canon EOS M50 Mark II brings autofocus and video refinements

14 Oct

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_3152685850″,”galleryId”:”3152685850″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Canon has just announced the EOS M50 Mark II, a relatively minor update to one of its most popular mirrorless models. The M50 Mark II shares the same 24MP APS-C sensor with its predecessor, and the same Digic 8 image processor. The Dual Pixel autofocus system has been updated to allow for eye tracking in both stills and video, and users can now capture vertical video and stream to YouTube Live over a smartphone internet connection.

The rest of the camera’s specs are largely unchanged. Video tops out at 4K/24p with a heavy 1.5x crop, and autofocus in 4K is contrast-detect only. Full HD comes with Dual Pixel autofocus, and you can capture slow-motion up to 120p. On the stills side, a new electronic shutter option is available and burst speeds top out at 7.4fps with continuous autofocus. The camera is CIPA-rated to capture 305 images on a charge, but of course, you can expect much more in general use.

The EOS M50 Mark II will be available in late November 2020 for $ 599 USD body-only, $ 699 USD as a kit with the 15-45mm F3.5-6.3, and $ 929 USD as a kit with the 15-45mm and 55-200mm F4.5-6.3 lenses.

Press release:

Improved eye autofocus paired with new video and streaming functions make the new Canon EOS M50 Mark II camera a strong imaging tool for content creators and imaging storytellers

MELVILLE, N.Y., October 14, 2020 –– Canon U.S.A., Inc., a leader in digital imaging solutions, today announced the EOS M50 Mark II Interchangeable Lens Camera, the successor to the #1 selling mirrorless camera in the U.S. market – the EOS M50*. An all-in-one product for content creators with improved video features and autofocus capabilities, the EOS M50 Mark II is the latest, high-quality digital imaging camera in the notable EOS lineup.

“Our customer base includes future content creators and imaging storytellers; it’s in our best interest to continuously provide high-quality products that are easy to use in the creative world of photography and video content creation, as well as streaming,” said Tatsuro “Tony” Kano, executive vice president and general manager of the Canon U.S.A., Inc. Imaging Technologies & Communications Group. “The EOS M50 Mark II continues to pave the way for photography and video enthusiasts to experience a lightweight interchangeable lens camera with many similar features as our full-frame professional mirrorless cameras.”

For the family who strives for high-quality output when capturing their precious moments or for the budding social media creator, the added and improved capabilities of the EOS M50 Mark II camera make the upgrade to an ILC extremely appealing. The new features include:

  • Improved autofocus including eye autofocus for stills and video
  • Vertical video shooting support
  • Vari-angle touchscreen LCD with newly added tap video record button and movie self-timer for better vlogging experience
  • High quality webcam capability, when used with compatible services, with the free EOS Webcam Utility software or Clean HDMI output
  • Wireless YouTube Live streaming capability**
  • The ability to tap the screen to auto focus on your subject while looking through the EVF, helping to control who the main focus of the image is

The EOS M50 Mark II camera is inclusive of many of the beloved features of its predecessor. Overall, the EOS M50 Mark II is a well-balanced package deal for those interested in both still photography and videography – including those with sparks of social media content creation, thanks to the 4K UHD 24p. Providing a 24.1MP APS-C CMOS sensor, DIGIC 8 image processor and built in Wi-Fi® and Bluetooth® technology, as well as access to image.canon cloud service for better workflow, the EOS M50 Mark II camera remains compact and a lightweight addition to your carry bag.

Pricing and Availability

The Canon EOS M50 Mark II camera is scheduled to be available in Late November 2020 at an estimated retail price of $ 599.99 – body only, $ 699.99 for the camera body plus EF-M 15-45mm lens kit and $ 929.99 for the camera body plus EF-M 15-45mm and EF-M55-200mm double zoom lens kit.

* Source: The NPD Group, Inc. U.S. Retail Tracking Service, Mirrorless Detachable Lens Cameras, Based on camera family unit sales, Jan. 2020 – Aug. 2020 combined.

** The live streaming service available with this product is for live streaming on YouTube only. To use live streaming, you need to have an active YouTube account and an image.canon account. Please be aware that YouTube may change, stop, or terminate its services, including live streaming, at any time without notice. In accordance with YouTube’s “Restrictions on live streaming” users must have a minimum of 1,000 channel subscribers in order to live stream from a mobile device (including camera products with live streaming capability). For up-to-date information from YouTube on restrictions, please visit https://support.google.com/youtube/answer/2853834?hl=en. Canon makes no representations or warranties with respect to any third party product or service, including live streaming.

Canon EOS M50 II specifications

Price
MSRP $ 599 (body only), $ 699 (w/15-45mm lens), $ 929 (w/15-45 and 55-200mm lenses)
Body type
Body type SLR-style mirrorless
Body material Composite
Sensor
Max resolution 6000 x 4000
Image ratio w:h 1:1, 4:3, 3:2, 16:9
Effective pixels 24 megapixels
Sensor photo detectors 26 megapixels
Sensor size APS-C (22.3 x 14.9 mm)
Sensor type CMOS
Processor Digic 8
Color space sRGB
Color filter array Primary color filter
Image
ISO Auto, 100-25600 (expands to 51200)
Boosted ISO (maximum) 51200
White balance presets 7
Custom white balance Yes
Image stabilization No
Uncompressed format RAW
File format
  • JPEG (Exif v2.31)
  • Raw (Canon CR3 14-bit)
  • C-Raw (Canon .CR3)
Optics & Focus
Autofocus
  • Contrast Detect (sensor)
  • Phase Detect
  • Multi-area
  • Center
  • Selective single-point
  • Tracking
  • Single
  • Continuous
  • Touch
  • Face Detection
  • Live View
Autofocus assist lamp Yes
Manual focus Yes
Number of focus points 143
Lens mount Canon EF-M
Focal length multiplier 1.6×
Screen / viewfinder
Articulated LCD Fully articulated
Screen size 3
Screen dots 1,040,000
Touch screen Yes
Screen type TFT LCD
Live view Yes
Viewfinder type Electronic
Viewfinder coverage 100%
Viewfinder resolution 2,360,000
Photography features
Minimum shutter speed 30 sec
Maximum shutter speed 1/4000 sec
Exposure modes
  • Program
  • Shutter priority
  • Aperture priority
  • Manual
Built-in flash Yes
Flash range 5.00 m (at ISO 100)
External flash Yes
Flash modes Evaluative (face priority), Evaluative, Average
Flash X sync speed 1/200 sec
Drive modes
  • Single
  • Continuous
  • Self-timer
Continuous drive 10.0 fps
Self-timer Yes (2 or 10 secs, custom)
Metering modes
  • Multi
  • Center-weighted
  • Spot
Exposure compensation ±3 (at 1/3 EV steps)
AE Bracketing ±2 (3 frames at 1/3 EV steps)
Videography features
Format MPEG-4, H.264
Modes
  • 3840 x 2160 @ 23.98p / 120 Mbps, MP4, H.264, AAC
  • 1920 x 1080 @ 60p / 60 Mbps, MP4, H.264, AAC
  • 1920 x 1080 @ 30p / 30 Mbps, MP4, H.264, AAC
  • 1920 x 1080 @ 23.98p / 30 Mbps, MP4, H.264, AAC
  • 1280 x 720 @ 120p / 52 Mbps, MP4, H.264, AAC
  • 1280 x 720 @ 60p / 26 Mbps, MP4, H.264, AAC
Microphone Stereo
Speaker Mono
Storage
Storage types SD/SDHC/SDXC slot (UHS-I compatible)
Connectivity
USB USB 2.0 (480 Mbit/sec)
USB charging No
HDMI Yes (micro-HDMI)
Microphone port Yes
Headphone port No
Wireless Built-In
Wireless notes 802.11b/g/n + Bluetooth
Remote control Yes (via smartphone)
Physical
Environmentally sealed No
Battery Battery Pack
Battery description LP-E12 lithium-ion battery & charger
Battery Life (CIPA) 305
Weight (inc. batteries) 387 g (0.85 lb / 13.65 oz)
Dimensions 116 x 88 x 59 mm (4.57 x 3.46 x 2.32)
Other features
Orientation sensor Yes
Timelapse recording Yes
GPS None

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on The new Canon EOS M50 Mark II brings autofocus and video refinements

Posted in Uncategorized

 

Easily Create 2D Illustrations from Photographs Using GIMP

14 Oct

The post Easily Create 2D Illustrations from Photographs Using GIMP appeared first on Digital Photography School. It was authored by Ana Mireles.

From advertising campaigns to cartooning your profile photo, 2D illustrations are used much more than you realize. Creating 2D illustrations can be a lot of fun, but they aren’t necessarily easy to do. Here’s an uncomplicated way to use photography as a template to get great 2D illustration results.

Create 2D illustrations from a photograph

Create 2D illustrations in GIMP

There are tons of programs for visual artists and graphic designers that specialize in digital drawing and 2D illustrations, but have you ever tried to actually create an illustration from scratch?

Graphic design software can be amazing and, for some great professionals, this can be the way to go. But many of us need a starting point to get us going, especially if our talent is in photography and not design.

That’s why I’m going to show you how to use GIMP to create 2D illustrations out of a photograph.

1. Draw the subject

First, choose the photo you want to draw. There are no restrictions here; you can use a portrait, a landscape, still-life, or anything else you want. I do suggest you start with images that are simple and don’t have too many details.

Create 2D illustrations using photographs

Imagine you’re creating an illustration from a photo in real life. You would place some tracing paper on top of your image and then start tracing and coloring on it, right? Well, this is the same thing.

First, create a new transparent layer. You can do this by going to Layer (in the menu) and then choosing New Layer. Make sure you select Fill with Transparency and press OK.

Next, you need to select the outer part of your subject. You can use any selection tool that works best for you; GIMP has many solutions for this.

For example, you can use the Path tool because it gives the most control. Just click every time you want to create an anchor point around your subject. Then move the path handles to adjust the curvature.

Make a selection with the Path tool

Once you’re done outlining your subject, click Selection from Path on the left-side Options panel. This will turn your path into a selection, which is what you want. But note that this is only necessary if you used the Path tool; with any of the other selection tools, you can skip this step.

Now you can use the Bucket tool to color your entire subject. You can use the color picker to select a color that matches the original color from the photo.

Of course, you can also use a color different from the original object. Get as creative as you want.

Finally, click inside the selection to fill it with your chosen color.

2. Color the inside shapes

Now that you have your main shape, you can start adding some shapes on the inside of your subject using different colors.

To do this, disable the top layer by clicking on the eye icon next to it. That way, you can see the original image.

Select the area you want to color. Then come back to the top layer and use the Bucket tool with a new color to fill it.

Draw shapes to create a 2d illustration

Repeat this process for all the shapes you want. Keep in mind that 2D illustrations are not as detailed as a realistic 3D model. So keep going only to add enough information to your subject to make it recognizable.

You don’t have to be extremely precise with your selection when you’re working inside a shape. GIMP will automatically stop at the edge. Notice in the next image how my selection is over to the yellow part, but the new color doesn’t spill there; it stops at the edge of the dark brown shape.

Selecting and coloring shapes

3. Add some details

Working on the top layer, turn down the Opacity so that you can see the original image underneath to use as a template for drawing details. Keep in mind that only you will see both versions (the illustrated and the original), so you don’t have to copy everything exactly as it is.

If you want to add details with thin lines and you don’t have a steady hand, you can use the Path tool to trace them. Then choose Stroke Path from the Options Panel. This will draw a line using the current Brush or Pencil settings.

Stroke path to simulate pencil lines

Of course, you can draw the details freehand using the Pencil or the Brush tool, as well.

To add some thicker decorations, you can use the selection tools again to make things faster. In this example, I used the Color Selection tool to select the blues on the original photo. I then painted the flower:

Use the selection tools to paint the details

The specific tools and strategies that you use will depend on the illustration you are creating and your own drawing skills.

4. Fill the background

If you want to draw a background, then add a New Layer in between the original photograph and the first drawing layer.

Choose the color you want, then go to Edit>Fill with FG color. FG stands for “foreground.”

You can leave the background as a solid color or add some decoration by drawing lines and shapes the same way you did for the subject.

Create 2D Illustration with creative backgrounds

Final thoughts

As you can see, by using a photograph as a template it’s really easy to create 2D Illustrations.

When you’re saving your file, remember that GIMP has its own format that will be the default setting when you use the Save or Save As choices. To use a universal file format such as JPEG or TIFF, you need to select Export As.

I hope you enjoyed the tutorial! The next time you want to create 2D Illustrations, let your photography skills help you out.

The post Easily Create 2D Illustrations from Photographs Using GIMP appeared first on Digital Photography School. It was authored by Ana Mireles.


Digital Photography School

 
Comments Off on Easily Create 2D Illustrations from Photographs Using GIMP

Posted in Photography

 

The Canon PowerShot Zoom fits in your pocket and zooms to 400mm

14 Oct

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_1510356824″,”galleryId”:”1510356824″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Canon has just released the details on the PowerShot Zoom, an extremely compact digital monocular. Users can view scenes through an electronic viewfinder at switchable 100mm or 400mm focal lengths, and then digitally zoom to 800mm (all 35mm-equivalent).

Of course, a modest sensor and aperture make it possible to cram all that reach into your pocket, and the Zoom has a 1/3″ sensor capable of taking 12MP JPEG images (no Raw capture is supported) or 1080/30p video through the F5.6-6.3 lens. The ISO ranges from 100 to 3200, and we’d expect the Zoom to be best-suited for daytime use with plenty of light. There’s also optical image stabilization and AF tracking with face detection, and the Zoom will focus down to 1m (3.28ft) at 100mm and 4.5m (14.76ft) at 400mm.

Sample images

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_5907135940″,”galleryId”:”5907135940″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Given the stills and video specs, it’s not surprising that Canon is pitching the Zoom mostly as a ‘viewer,’ allowing users up-close and personal looks at wildlife, sports matches, live music or general travel use. However, a familiar PowerShot user interface and wireless connectivity do make it easy to send supertelephoto images to your phone for quick sharing. You can also save them to a MicroSD card.

On its built-in USB-C chargeable battery, the PowerShot Zoom will run for around 70 minutes as a viewer and capture around 150 images before running out of power. Movie clips top out at 9:59 before needing to restart a new clip. The PowerShot Zoom comes with no claims of environmental sealing.

The PowerShot Zoom will be available in November 2020 for $ 299 USD.

Press release:

Canon debuts the company’s first-ever, Compact Telephoto Monocular, the PowerShot ZOOM

MELVILLE, N.Y., October 14, 2020 –– Hiking, birdwatching and nature gazing, consumers are embracing the beauty of the outdoors this season and beyond. With this in mind, it is important to have a convenient and intuitive imaging tool to explore the world. Developed to showcase an impressive telephoto reach in a user friendly, compact design, Canon U.S.A., Inc., a leader in digital imaging solutions, today launches the PowerShot ZOOM, the company’s first telephoto monocular.

The lightweight telephoto monocular sports 100mm, 400mm and 800mm telephoto viewing capability1 with a one-touch switch, and is equipped with impressive instant zoom capability to help users view distant subjects. Additionally, the monocular can capture images and videos to a micro SD card, and by pairing it with a compatible smart device2 and the Canon Camera Connect app3, these files can easily be downloaded. This pairing feature transforms the PowerShot ZOOM monocular into a friendly companion to compatible smartphones for viewing and capturing super-telephoto scenes.

“In today’s ever-changing world, consumers are looking for intuitive and portable imaging tools to view telephoto scenes up close and with ease,” said Tatsuro “Tony” Kano, executive vice president and general manager of the Imaging Technologies & Communications Group of Canon U.S.A., Inc. “Built for those users who enjoy outdoor activities, the PowerShot ZOOM monocular delivers a small, compact viewer with a long focal length. We are eager to see how consumers use this tool and the convenience it will add to their daily lives.”

In addition to its zoom capability, compact size and ability to pair with compatible smartphones, the PowerShot ZOOM telephoto monocular also features:

  • Auto focus when viewing through the electronic viewfinder (EVF) and recording images and video with face tracking
  • Optical Image Stabilization for shake correction
  • 39 inches, 2.36 million dots EVF
  • 12-megapixel still-image capture
  • Full HD video capture up to 30p (29.97)
  • Wi-Fi®, Bluetooth® connection with the Canon Camera Connect app and use of compatible mobile devices2
  • Live view and download of photos and videos with the use of the Canon Camera Connect app3
  • USB C terminal for charging and supplying power
  • Micro SD memory card slot

???Price & Availability

???????Available in white, the Canon PowerShot ZOOM compact telephoto monocular is scheduled to be available in late November 2020 for an estimated retail price of $ 299.99*. For more information, please visit usa.canon.com.

*Availability and specifications are subject to change without notice.

1 35mm film equivalent focal length. Both 100mm and 400mm uses optical lens and 800mm uses 2x digital zoom.

2 Compatible with iOS® versions 12.4/13.7, Android™ smartphone and tablet versions 6.0/7.0/7.1/8.0/8.1/9.0/10. Data charges may apply with the download of the free Canon Camera Connect app.

3 This app helps enable you to upload images to social media services. Please note that image files may contain personally identifiable information that may implicate privacy laws. Canon disclaims and has no responsibility for your use of such images. Canon does not obtain, collect or use such images or any information included in such images through this app. Compatible with select smartphone and tablet devices (Android™ version 5.0 or later and the following iOS® devices: iPhone 4s or later, iPad 3rd gen. or later, iPod Touch 5th gen.or later) equipped with Bluetooth® version 4.1 or later and the Camera Connect App Ver. 2.7.10. This application is not guaranteed to operate on all listed devices, even if minimum requirements are met.

Canon PowerShot Zoom specifications

Price
MSRP $ 299
Body type
Body type Compact
Sensor
Max resolution 4000 x 3000
Image ratio w:h 4:3
Effective pixels 12 megapixels
Sensor size 1/3" (4.8 x 3.6 mm)
Sensor type CMOS
Image
Image stabilization Optical
Uncompressed format No
File format
  • JPEG
Optics & Focus
Focal length (equiv.) 100–400 mm
Optical zoom 4×
Maximum aperture F5.6–6.3
Digital zoom Yes (2x)
Normal focus range 100 cm (39.37)
Screen / viewfinder
Articulated LCD No
Viewfinder type Electronic
Videography features
Format MPEG-4, H.264
Modes
  • 1920 x 1080 @ 30p / 30 Mbps, MP4, H.264, AAC
  • 1920 x 1080 @ 23.98p / 30 Mbps, MP4, H.264, AAC
Microphone Stereo
Storage
Storage types MicroSD
Connectivity
USB USB 2.0 (480 Mbit/sec)
Wireless Built-In
Physical
Environmentally sealed No
Battery Built-in
Battery description 800 mAh rechargeable lithium-ion battery
Battery Life (CIPA) 150
Weight (inc. batteries) 145 g (0.32 lb / 5.11 oz)
Dimensions 33 x 51 x 103 mm (1.31 x 2 x 4.06)

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on The Canon PowerShot Zoom fits in your pocket and zooms to 400mm

Posted in Uncategorized