RSS
 

Archive for July, 2019

How to Take the Perfect Macro Photo (Step-By-Step Guide)

22 Jul

The post How to Take the Perfect Macro Photo (Step-By-Step Guide) appeared first on Digital Photography School. It was authored by Jaymes Dempsey.

In this article, I’m going to show you exactly how you can take the perfect macro photo.

I’m talking about macro photos that are unbelievably good – the kind of photo that professionals strive for.

Because it turns out there are a few simple macro secrets. And if you use them regularly, you can practically guarantee some gorgeous macro images.

Are you ready for some step-by-step instructions that will take your macro images to the next level?

Let’s dive right in.

Step 1: Shoot during the right light (clouds or Golden-Hour!)

Macro photography starts with light.

And without good light?

Your photos just won’t work.

But what counts as good light for macro photography?

First of all, the golden hours are amazing for macro photography. If you shoot during the hour or two after sunrise and the hour or two before sunset, you’re guaranteed incredible light.

You do have to be careful about the light’s direction. During the golden hours, the sun is low in the sky. This means that the light hits your subject from an angle. And this angle will affect how your photos turn out.

In general, frontlight is the best type of light for macro photography.

(Frontlight refers to light that comes from over your shoulder, and hits the front of your subject.)

So if you stick to frontlight, you’ll do just fine.

If you struggle to find the best position for frontlight, try pointing your shadow at your subject. That way, you can be sure that your subject is always perfectly lit.

However, the golden hours aren’t the only type of good light for macro photography.

You can also shoot beautiful macro photos when the day is heavily overcast.

Because clouds diffuse the light, making it nice and soft.

With soft light, you don’t have to worry about the direction. Instead, focus on shooting subjects with color. The soft light will make the hues more vivid.

And speaking of subjects:

Step 2: Find a single stand-out subject

All perfect macro photos need a strong subject.

Something that stands out. Something that can act as a focal point for your photo. Something that anchors the shot.

There are dozens of possible macro photography subjects, including:

  • Flowers
  • Insects
  • Rocks
  • Feathers
  • Leaves

But here’s the thing:

The particular category of the subject isn’t important. You can take amazing macro photos of flowers or insects, rocks or feathers.

What’s important is that you choose the right flower, the right insect, the right rock.

Because you need to choose a subject that’s going to stand out from its surroundings. That is, you should aim for a subject that contrasts with the environment (ideally in multiple ways).

For instance, your subject can be sharp, while its surroundings are soft.

Your subject can be dark, while its surroundings are light.

Your subject can be red, while its surroundings are green.

The point is for your subject to stand out. If your subject blends in with the environment, the shot generally won’t work. Because almost every macro photo needs an anchor.

Note that this means your subject shouldn’t overlap chaotically with other, similar objects. For instance, you don’t want a flower that’s surrounding by other distracting flowers.

Bottom line:

Make sure your subject is powerful. That’s the first step to capturing the perfect macro photo.

Step 3: Find a simple background that enhances the subject

You know the importance of a stand-out subject.

But your background is important, too.

If you want to capture a stunning macro photo, you’ve got to make sure that your background is totally aligned with this goal.

What makes for the perfect macro background?

First, the perfect background is simple. It doesn’t have much going on. It doesn’t distract.

Second, the perfect background enhances the photo as a whole. That is, it adds a splash of color, or creates a pure white look for the subject to rest on.

In general, you can make your macro backgrounds simple by creating a deep blur. You do this two ways:

  1. Use a wide aperture (in the f/2.8 to f/5.6 range).
  2. Have a large subject-to-background distance. For this, make sure that your background is off in the distance.

To enhance the photo with your background is harder. I like to make backgrounds by using the sun-shade technique – where you make sure that your subject is in the shade, and your background is in golden sun.

That’s how I was able to capture backgrounds like this one:

If you can’t use the sun-shade technique, that’s okay. Try to find a background that includes a bit of color – such as a distant autumn tree.

Note that you can often find better backgrounds by simply walking around your subject and observing it from multiple angles. Try getting down low, shooting from up high, or getting on a level with your subject.

Step 4: Pick the perfect settings for a sharp, well-exposed macro photo

Once you’ve chosen a subject and a background, it’s time to choose your macro settings.

I’ll start by sharing my common settings, and then explain why I choose them and what I suggest you work with.

When I shoot macro photography, I use Manual mode, because I like tweaking both my shutter speed and aperture to try out different looks. However, it can also make sense to work in Aperture Priority mode if you’re not interested in playing with different shutter speeds for creative results.

I don’t recommend Shutter Priority mode, because this relinquishes control over your aperture – and aperture is something that you should absolutely choose yourself.

Speaking of aperture: I consistently use apertures between f/2.8 and f/5.6. This gives me the perfect blurry background – which, as I mentioned above, helps create a stand-out subject.

However, macro photographers sometimes prefer their subject to be sharp throughout. In this case, you’ll need an aperture in the area of f/16 and beyond, and you’ll need a tripod. In fact, if your subject is very three-dimensional, you’ll need to focus stack (a technique that’s beyond the scope of this article).

I tend to work handheld (because I like the flexibility). This means that I rarely let my shutter speed drop below 1/120th of a second. But if you use a tripod, you’re free to let your shutter speed drop far below this mark (if there’s absolutely no wind, that is!).

In general, I advocate using the lowest ISO you can get away with. You want to minimize noise as much as possible. So try to keep this down.

Finally, make sure that you switch from autofocus to manual focus, especially if you’re working at high magnifications. You simply can’t focus well with autofocus at macro magnifications, no matter how good your lens. So manual focus is key to getting the perfect shot.

And that’s it! Take your shot – and admire it! Because if you’ve followed the instructions above, it’s going to look really, really stunning.

How to take the perfect macro photo: next steps

You know how to take the perfect macro photo.

You know how to find the perfect light, the perfect subject, and the perfect background.

You even know the perfect macro photography settings.

So go out and take some perfect macro photos of your own!

Which step in capturing a perfect macro photo do you struggle with the most? Leave a comment right now letting me know – and I’ll see what I can do to help!

 

how-to-take-the-perfect-macro-photo

The post How to Take the Perfect Macro Photo (Step-By-Step Guide) appeared first on Digital Photography School. It was authored by Jaymes Dempsey.


Digital Photography School

 
Comments Off on How to Take the Perfect Macro Photo (Step-By-Step Guide)

Posted in Photography

 

How to Use the HDR Panorama Photo Merge in Lightroom Classic CC

21 Jul

The post How to Use the HDR Panorama Photo Merge in Lightroom Classic CC appeared first on Digital Photography School. It was authored by Adam Welch.

Not long ago I wrote about Four of the Latest Updates to Lightroom Classic CC. In it, we talked about some of the fresh features Adobe has recently added to Lightroom. One of those great new additions was the single-step HDR Panorama Photo Merge. That’s a mouthful of a name, but it’s an incredibly useful tool that allows us to combine multiple bracketed exposures into a seamless high dynamic range panoramic image in, as the name suggests, essentially a single step. In this article, we’re going to delve a little deeper into the new single-step step HDR Panorama Photo Merge (geez) feature and show you exactly how to capture and combine your images to make a beautifully executed panorama.

What is an HDR Panorama?

High dynamic range (HDR) photographs and panoramas are nothing new to the world of photography. In fact, neither are HDR panoramas.

HDR photos are simply images combining multiple exposures to form a final photo that exhibits tonal and/or focus ranges far beyond a single exposure. Along those same lines, panoramic photos are images stitched together that carry a visual perspective beyond what is obtainable from a single exposure (with a few exceptions).

As you may have guessed, an HDR panorama combines multiple photographs to produce a wide perspective composite image featuring high dynamic range.

Previous methods for merging multiple images to produce HDR panoramic photos were generally tedious and required venturing over into Photoshop. Luckily, with the new HDR Panoramic feature introduced in v8.0 of Lightroom Classic CC, you can now efficiently combine your images with just a few clicks of the mouse. Let me show you how I made the above HDR pano combining twelve separate bracketed photos right inside of Lightroom.

Obtaining your images for merging

The first and arguably most crucial part of creating your HDR panorama begins inside your camera.

Lightroom places some stringent criteria on the images you can combine using it’s single-step HDR Panorama function. ALL of these rules must be met by each one of your images prior to merging.

Here are the “rules” for images you plan to merge into an HDR pano directly from Adobe:

  • All the images in your selection must contain the exposure metadata – Exposure time, f-number, and ISO.
  • Each set of bracketed exposures in your selection must have the same number of images. For example, if you chose to bracket with three images, then all the sets in the selection must also use three images.
  • Every set of bracketed exposures in your selection must have the same exposure offsets. For example, if your first set has exposure offsets of (0, -1, +1), then all other sets in the selection must follow the exposure offset pattern. The image sets can have different exposure values; only the exposure offsets pattern must be consistent across all the sets.
  • Each set of bracketed exposures must be captured contiguously. For example, if you’ve considered a bracket size of three while capturing the images, then the first three images in the sequence become part of a bracket set. The next three images in the sequence become part of another bracket set, and so on.
  • Within a set of bracketed exposures, the images must not have the same exposure value.

While you can shoot your images in either a vertical or horizontal orientation, it is a good idea to use vertically orientated photos in you plan on displaying them digitally. This avoids extremely long, yet narrow images. Of course, this is entirely up to you.

Combining the images

Now that you’ve made it through the rather exacting process of actually obtaining your photos for merging, the rest of the operation is refreshingly easy to complete.

Selection

First things first. In the Library Module of Lightroom Classic CC select the images you want to use for the HDR pano. An easy trick to select all of your images at once is to select the photo at the beginning of the series and then hold down the shift key while clicking the last photo in the series. This automatically selects all your bracketed exposures at once. It also saves you quite a few mouse clicks if you are using a high number of photos.

Once you’ve got all of your photos selected, right-click on any of those images and choose Photo Merge, and then HDR Panorama.

It’s here where you learn for sure whether all of your images meet the requirements for merging. If not, you will receive the soul-crushing message ‘Unable To Detect HDR Exposure Bracket Size. Merge To Non-HDR Panorama Instead?’ That means Lightroom will merge the photos into a normal non-HDR pano if possible.

However, if you’ve done your duty, and you obtained all of your images correctly, your photo will appear as a preliminary smart preview. From here, it’s just a matter of controlling how you want Lightroom to handle the final merging of your images. You’ll have quite a few options that will affect the ultimate product.

Projection modes

Think of projections as the shape of the canvas on which Lightroom paints your finished HDR panorama. There are three different projection modes from which to choose based on the nature of the panorama you are creating:

  • Spherical: This aligns and transforms the images as if they were mapped to the inside of a sphere. This projection mode is great for ultra-wide or multi-row panoramas.

  • Cylindrical: This projects the panorama/HDR panorama as if it were mapped to the inside of a cylinder. This projection mode works well for wide panoramas, but it also keeps vertical lines straight.

  • Perspective: This projects the panorama/HDR panorama as if it were mapped to a flat surface. Since this mode keeps straight lines straight, it is great for architectural photography. Extremely wide panoramas may not work well with this mode due to excessive distortion near the edges of the resulting panorama.

Boundary Warp

The amount of Boundary Warp is a way to stretch your merged HDR pano so that it more or less fills the frame of the selected projection mode. With Boundary Warp, you have a slider that ranges from 0-100 that allows you to preserve any content of the photo that you may lose after cropping.

Experiment with different Boundary Warp settings until you reach a happy medium between distortion and content preservation.

Auto settings/crop

These settings work extremely well to save you some editing time at least on the front end. The auto-crop and auto-settings functions allow Lightroom to trim and process your finished HDR panorama automatically. While you, of course, can crop and process your image manually after merging, I’ve found the auto settings function gives consistently outstanding results.

Stacking

Consider stacking as an afterthought of your post-panorama post-processing. It’s a way for you to keep all of your ducks in a row, so to speak, and is especially useful if you’ve used many photos to construct your HDR panorama. Choosing the stacking option literally stacks all of the images used for your HDR panorama merge into a group with the merged image placed on top. This aids in keeping your filmstrip tidy and saves physical space in the Library Module.

Once you have made all of your selections for the HDR pano merge, it’s time to click the ‘Merge’ button. This begins the process of combining the images into a single DNG file.

After the merge is complete, you will have an image which you are free to finish processing just as you could with any other digital RAW file. This includes adjusting the auto-cropping and, of course, the auto settings. This achieves the final image that we saw from earlier.

Final considerations

Remember that any HDR image is already by its very definition a composite photo. As such, it is a combination of many different exposures which, if pushed too far, can result in an incredibly fake-looking final product. Always keep your HDR images within the realm of passable reality unless you are intentionally going for a hyper-realistic appeal. Along those same lines, make sure the photos meet all the criteria for HDR panorama merging listed above.

Furthermore, attempt to previsualize the final merged photo in your mind and shoot your images according to the tonal range and perspective you wish to achieve. When in doubt, it’s always better to have too many images to work with than not enough.

Have some HDR Panorama photos you’ve created inside of Lightroom Classic CC? We’d love to see them! Feel free to share them in the comments.

 

HDR-panorama-photo-merge

The post How to Use the HDR Panorama Photo Merge in Lightroom Classic CC appeared first on Digital Photography School. It was authored by Adam Welch.


Digital Photography School

 
Comments Off on How to Use the HDR Panorama Photo Merge in Lightroom Classic CC

Posted in Photography

 

How to Shoot Animal Portraits [video]

21 Jul

The post How to Shoot Animal Portraits appeared first on Digital Photography School. It was authored by Caz Nowaczyk.

animal-portraits

In this video from the crew over at Cooph, Vincent Lagrange, shows you how to shoot animal portraits that have style and tell the story behind the animal.

?

These are the key things Lagrange points out in the video:

Purity

Animals don’t need makeup or a stylist – they have their own unique look to photograph from the get-go.

animal-portraits

Technique

  • Build a good relationship with the animal.
  • Create a soft light setting. Avoid flash so that the animal is as relaxed as possible.
  • Create a quiet atmosphere
  • Communicate with sound.
  • Only use food when the shoot is becoming difficult.

animal-portraits

Approach

  • Don’t start directly photographing the animal. Spend some time with it first.
  • If the animal doesn’t want to be photographed, then don’t. Let it rest and then try again. It is not an object.
  • Have patience

Equipment

  • For the larger portraits, Vincent uses the Leica S medium format camera.
  • When he is on the road, he uses the Leica M.
  • He always uses fixed lenses – never zooms.
  • He also never uses continuous shooting mode. He invests time in composing and doing single shots and keeping it quiet.

You may also find the following helpful:

  • Five Tips for Creative Pet Photography
  • Tips for Great Lighting for Pet Photography
  • 6 Tips for Working with Unruly Animals in Pet Photography
  • Why Taking Pictures of Your Pets Will Help Make You a Better Photographer
  • Five Things You Need to Know Before Starting a Pet Photography Business

 

The post How to Shoot Animal Portraits appeared first on Digital Photography School. It was authored by Caz Nowaczyk.


Digital Photography School

 
Comments Off on How to Shoot Animal Portraits [video]

Posted in Photography

 

Weekly Photography Challenge – Opposites

20 Jul

The post Weekly Photography Challenge – Opposites appeared first on Digital Photography School. It was authored by Caz Nowaczyk.

This week’s photography challenge topic is OPPOSITES!

Anusha Barwa

Go out and capture absolutely anything from still life to pets, street photography, still life, landscape, and portraits. They can be color, black and white, moody or bright. Just so long as they have opposites! Opposing colors, opposing objects, light and shade, opposing shapes – You get the picture! Have fun, and I look forward to seeing what you come up with!

Daniele Levis Pelusi

 

Fabio Rose

Check out some of the articles below that give you tips on this week’s challenge.

Tips for Shooting OPPOSITES

How to Make Your Photos Stand Out Using Color Contrast

How to Use Shadow and Contrast to Create Dramatic Images

Five Tips for Creative Pet Photography

The dPS Top Street Photography Tips of 2018

The dPS Top Landscape Photography Tips of 2018

 

Weekly Photography Challenge – OPPOSITES

Simply upload your shot into the comment field (look for the little camera icon in the Disqus comments section) and they’ll get embedded for us all to see or if you’d prefer, upload them to your favorite photo-sharing site and leave the link to them. Show me your best images in this week’s challenge.

Share in the dPS Facebook Group

You can also share your images in the dPS Facebook group as the challenge is posted there each week as well.

If you tag your photos on Flickr, Instagram, Twitter or other sites – tag them as #DPSopposites to help others find them. Linking back to this page might also help others know what you’re doing so that they can share in the fun.

The post Weekly Photography Challenge – Opposites appeared first on Digital Photography School. It was authored by Caz Nowaczyk.


Digital Photography School

 
Comments Off on Weekly Photography Challenge – Opposites

Posted in Photography

 

A Brief introduction to GIMP Software

19 Jul

The post A Brief introduction to GIMP Software appeared first on Digital Photography School. It was authored by Ana Mireles.

Whether you are looking for a free program to start learning photo editing or you want a lighter alternative to Photoshop, GIMP may be the software for you. You can create graphics, text, and manipulate photos, but first, you need to understand how it works. Keep reading for a brief introduction to GIMP software and how to use it.

Introduction to GIMP

What is GIMP?

GIMP is a completely free image editor. You can even use it for commercial purposes without having to pay. It is also open-source, which means that a lot of third-party developers have created free plug-ins for use with GIMP. Furthermore, if you know how to code, you can also modify it as you see fit. Finally, it is also available for many different operating systems. You can download GIMP from its site, and it will suggest the one for you.

Introduction to GIMP Software Download

It’s even possible to take it with you for other devices. You can find an instruction manual in the article How to Install GIMP on a Portable Device. In any case, on the main page of GIMP’s website, you’ll see a very enticing description, beautifully illustrated and promising high-quality image manipulation, original artwork creation, and graphic design elements.

Introduction to GIMP. What can you do with it

It all sounds fantastic, right? But when you open the program, you may not know where to start. Well, let’s break it down for you to easily understand.

Multiple windows or just one?

Most programs open in one window that you can enlarge or squeeze, minimize or close, all in one go. Instead, GIMP, by default, opens in three windows. This is a bit puzzling, and I found it very off-putting the first time I used it.

Introduction to GIMP. Multiple Windows View

The good news is that from version 2.8 of GIMP, you can change into a one-window view. I’ll tell you how to switch in just a moment.

First, I want to tell you what makes the multiple window choice worth trying. As each image opens as a new window, you can work with two or more images side by side. Even better, the same image can open in two windows so you can work on it as a side-by-side comparison.

Introduction to GIMP. Side by side comparison using multiple windows.

Another perk of having separate windows is that you can gain more image space on your screen. You can individually minimize any window containing tools or labels that you’re not using. Now, if you’re not convinced with it, you can switch to the single-window mode by going to Menu -> Window -> Single-Window Mode. Whichever choice you make, it saves as a default for the next time you open GIMP.

Introduction to GIMP. How to change to single window view.

What’s What?

Now that you have set up your workspace, it’s time to learn what each window contains. In the center, you’ll have the image window. Here you can see the image or canvas you’re working on. If you are on multiple windows, each image opens separately (as shown before), and if you are on the single-window mode, they open as tabs.

Introduction to GIMP. Open images as tabs

On the left side, you’ll have a window that holds your toolbox. In there, you can have a shortcut button for the tools you use most often. It comes with a default setup that you can personalize. To do it, go to GIMP -> Preferences -> Toolbox and choose the tools you want to add or delete from there.

Introduction to GIMP. Set toolbox preferences

Underneath you have the options available for each tool. Therefore, it’s not static content; it changes every time you select a different tool. You can drag and drop this dock to a different position if you prefer, however, I keep it on the right.

Introduction to GIMP. Toolbox option panel

On the right side, you have a window that holds a series of tabs like History or Layers. This window behaves like a dock. If you want to open a tab that is not showing, you have to go to the menu Windows -> Dockable Dialogs, and chose it from the drop-down menu. It will automatically dock the tab. Then click on the arrow button on the right to open the settings and manage it from there.

Introduction to GIMP. Manage the dockable panels

If you are working with multiple-windows mode, you can still reach these tabs on the menu Windows -> Dockable Dialogs. In this case, you’ll find that some open as tabs and some open as separate windows that you can drag, minimize, or close individually.

Save or export?

Whether you did a small modification or an original artwork, you need to save it. If you go to the menu File -> Save as you would normally do, you can only use the GIMP extension .xcf.

Introduction to GIMP. Save files

If you want to use a universal format like .jpg or .tiff or even change it into Photoshop’s .psd, you have to go to the menu File -> Export. From there, you have a huge variety of file formats to choose from. If you aren’t sure about which one is best, check this article for Understanding all the Different Image File Formats.

Introduction to GIMP. Export to save in different formats

I hope you found this article helpful overview to understand GIMP software and give it a try. If you are still not convinced with it, there are other free programs out there. For more information check out this article with Tips on choosing a Free Photo Editor for Post-Processing.

Have you used GIMP software? What are your thoughts? What are some other free post-processing software applications that you use? Please share with us in the comments section.

 

gimp-software

The post A Brief introduction to GIMP Software appeared first on Digital Photography School. It was authored by Ana Mireles.


Digital Photography School

 
Comments Off on A Brief introduction to GIMP Software

Posted in Photography

 

4 Tips for Achieving Flattering Portraits

19 Jul

The post 4 Tips for Achieving Flattering Portraits appeared first on Digital Photography School. It was authored by Lily Sawyer.

Flattering portraits rarely happen as a default. Some people are photogenic, yes, and look good at every angle. But often, we work hard to get flattering photos that the sitter loves. There is no one-trick as every person’s face, form, and shape are different. We have to tailor our angles to each portrait sitter. However, there are basic fundamental tools we can use that help us achieve flattering portraits.

dps-tips-flattering-photos-lily-sawyer-photo

1. Use the right lens

Having photographed people for a decade now, I have learned that there is no great all-around lens that can do the best job for everything. Sure there are good lenses that achieve good results, but I’d favor specialist lenses for specific purposes.

dps-tips-flattering-photos-lily-sawyer-photo

Let’s take portraits, for example. A basic kit lens that comes with a camera purchase is usually an 18mm – 55mm zoom. It is expected to be good for wide angles and normal-range views. Yes, it’s good for day-to-day standard snaps. But for portraits? A longer zoom, such as the 85mm, 105mm, and 200mm, are a much better choice for stunning portraits. These give a shallow depth of field, great compression to the background and produce flattering portraits. There is no distortion similar to what you would get when using wider lenses for portraits.

You can read more about choosing the best portrait lens on here.

2. Use the right angle for the person

Many women I have photographed do not like having their portrait taken. They are aware of various imperfections on their faces, angles they do not like, and features they are self-conscious about. This is normal and certainly rings true for me. I’m the worst portrait sitter.

dps-tips-flattering-photos-lily-sawyer-photo

In order to achieve portraits that women like, I usually shoot both sides and show them the first few photos I take on the LCD screen of the camera. They choose a preferred side, and we take a few more from that angle. The worst thoughts are usually just in their minds. When they see their photos, even on the back of the camera, they realize it’s not as bad as they thought and there is a better side. They usually relax more from then on.

Generally, I photograph at slightly higher than eye level for most women. This angle hides any unwanted necklines, slims down cheeks and tapers the face down a little for a more flattering portrait.

If I’m photographing from an even higher level than usual, I ask them to look up at me just ever so slightly, and that gives me a confident posture and stance too.

With men, it is usually quite the opposite. Most male portraits get taken within seconds. I find them less self-conscious with a “let’s get on with it, over and done with attitude” in a nice way. I ask them to stand as they usually do. If they slouch, I ask them to straighten their spines a bit, square their shoulders and look straight into the camera. Sometimes I get them to lean slightly against a wall. I generally photograph men at eye-level.

dps-tips-flattering-photos-lily-sawyer-photo

Children, on the other hand, I look best when photographed from waist high. That means I’m always a little lower than them – often sitting on the floor and looking up to them a bit. This means they don’t look too small, and they get a boost of confidence that they are being looked up at and not down to. Children often look down towards whatever they are holding or playing with. By shooting from a lower angle, I get to see their faces clearly too.

3. Use the right type of lighting

Simply put, short lighting is when the shadowed side of the face is closer to the camera. Being in the shadow, this side of the face is darker and therefore usually ‘shorter’ in terms of the span of the light hitting this side of the face. Broad lighting is the opposite when lit and the brighter side of the face is closer to the camera. Because it’s brighter, it appears much broader with more light reaching much of the area of the face.

dps-tips-flattering-photos-lily-sawyer-photo

Short lighting makes the face appear slimmer due to the shadows created on the face. This can also produce strong contrasts although you can soften the dark areas by using a reflector.

Broad lighting helps in making the face appear wider. Because this area is usually brightly lit compared to other areas, stronger contrast between dark and light is usually created.

Use these two lighting types to the advantage of the sitter for more flattering outcomes. You can read a more in-depth explanation of these two types of lighting on here.

4. Crop correctly

Because I always edit my photographs, I feel I can afford to change my composition in post-processing rather than always trying to get everything right in-camera. Don’t get me wrong, I strive to get my compositions right, but I have found I can always tweak it in post to improve it. I shoot fast and can’t always get the horizontals completely straight, so I correct this in post. This means I have to shoot a little wider than the final outcome.

dps-tips-flattering-photos-lily-sawyer-photo

I have no problems with cropping as long as it’s not too aggressive and there are ample pixels left in the image to produce great prints.

There are a few caveats in cropping though. For flattering portraits, never crop or compose your photos so that the edges and tangents are on body joints like elbows, knees, neck, wrist, shoulders and across the belly. These look odd and somewhat disturbing. Always crop in between or partway through the joints, so chest, arms, hips, leg, calves, forehead are acceptable. You can read more about tips on cropping to improve your image on here.

I have photographed many a woman who was very conscious of her body. For example, she was self-conscious of her arms, and yet she turns up in a sleeveless top. In those cases, I zoom in and crop the arms lengthways down so the photo only shows a third of the bare arm.

dps-tips-flattering-photos-lily-sawyer-photo

You can also crop to reposition your image and strengthen your composition as a result. I find using the rule of thirds as a very strong compositional tool and tend to lean towards it a lot. A symmetrical composition is also strong and effective. This is a good article on factors to consider when composing portraits.

I hope you found these four tips for flattering portraits helpful. If you have more tips to contribute, share them on here in the comments below.

 

achieving-flattering-portraits

The post 4 Tips for Achieving Flattering Portraits appeared first on Digital Photography School. It was authored by Lily Sawyer.


Digital Photography School

 
Comments Off on 4 Tips for Achieving Flattering Portraits

Posted in Photography

 

Makeup Essentials for Photographers Part 2 – Application

18 Jul

The post Makeup Essentials for Photographers Part 2 – Application appeared first on Digital Photography School. It was authored by Mark C Hughes.

makeup application for photographers 9

A little makeup will help your images pop

In part 1, we explored the tools you need to be able to help your subjects. Once you have all those essentials for applying makeup, the next step is the hard one – application. Again, this overview is intended for photographers and not makeup artists. The approach should be about helping your portrait subjects look a little better in your images of them. However, it should not replace using an actual makeup artist if you have one available.

Makeup artists can do amazing work that takes a lot of time, effort and skill to become good at. You can’t become a makeup artist by simply reading one article. We are going to help you tweak what is already there rather than give tips on how to be a junior makeup artist.

Many models come to sessions with their own makeup

Virtual Makeup

Beyond makeup, there are lots of techniques for improving someone’s appearance in post-processing including adding virtual makeup. Virtual makeup programs and plug-ins have come a long way, but, as always, it is much easier to get the images correct in-camera and not rely on post-processing to fix everything.

Also, while it can be done, post-processing images can take a fair bit of time, so getting it right in-camera means very little post-processing. Little post-processing can end up saving you a tremendous amount of time, particularly if you are handling lots of images and tight timelines.

Virtual makeup can be virtually indistinguishable from regular makeup and is way better than excessive smoothing or reverse clarity.

Before applying makeup

In general, when you are applying makeup to an individual, there are a few factors to consider before applying makeup to them. First, you need to be aware if they are comfortable with makeup and with you applying it to their faces. Most women and few men are comfortable with makeup, however, there are both men and women who are not. Before you do anything to anyone, you need to ask for their consent. Also, ask how comfortable they are with letting you do anything regarding the application of makeup.

When you apply makeup to someone, you end up getting up close and personal (much like a haircut) and there are lots of people and cultures that frown on you entering their personal space. Your subjects need to feel beautiful or handsome but more importantly, they must feel comfortable.

 

Rule of thumb

The rule of thumb for photographers who are applying makeup to subjects is that you are looking for a very light touch of makeup (i.e. very little).

With women, just improve a little of what is already there (they may already have most of it down and may be way more skilled at it than you are).

For men, you are looking to remove the sheen and give them a light tan to look healthier. For all your subjects, think smoothing and getting rid of shine.

makeup application for photographers 8

Making subjects relaxed is important

Approach for women

Lots of women wear makeup everyday. Many will show up for a portrait session with the makeup that they normally use and are comfortable with. That’s really great. For these women, you will need to carefully consider or assess what you want to achieve before applying or correcting your subject’s makeup. Ideally, your subject’s makeup is just fine with no need for any changes or only some minor touch-ups. Only add or repair what’s needed for these subjects. Do not make their makeup worse.

Alternatively, some women don’t wear any makeup. So for them, you will need to let them know you will only be doing a little to help them look better in front of the camera. You are really trying to make them look their best – you will not be trying to fix them or to try to make them look like a supermodel. Everyone has great features, and everybody wants to feel attractive. Great photography will bring out their inner beauty. You are just trying to enhance what they have, not to make them look like something they are not. Some women will joke and ask you to take 10 years off. The best thing to do is to reassure them that you will make them look good.

Makeup for men is just a really light touch.

Approach for men

Most men don’t wear makeup. This means that you need to make them relax having makeup on.  Depending upon how and who the person is, will affect your approach. The best approach you can take is to tell them you are just cleaning some stuff up and making them look great. It will be really important for most men to tell them that you will be putting very little makeup on them.

As with most subjects, you tend to be dealing with normal people. Here is a before makeup shot of a typical subject. Ensure your subject’s face is clean and moisturized before adding makeup.

Preparation

If your subject arrives with no makeup, you may need to apply some very basic makeup. Ideally, their faces are at least clean before you start. If your subject’s face is not clean, recommend a splash of soap and water as well as cleaning with a clean applicator using an alcohol-free toner.

Beyond making people feel comfortable, you also need to be wary of any allergies. Before you start applying any makeup to anyone, make sure you know if they are allergic to any products. This ensures you don’t start applying some makeup only to have them feeling really bad and break out in hives.

Fair complexion individuals will benefit from a little bit of makeup by providing some definition.

Your first step is to use blotting paper to blot up any obvious oil spots. Simply press the blotting paper to the oily area, lift, and repeat as necessary, using a clean section of blotting paper each time. Never rub, just blot.

Concealing

This is a critical stage of applying makeup. Done well, concealing transforms small skin irregularities and get things right straight out of the camera. This saves retouching later in post-processing.  Using your smallest brush (the lip or concealer brush), dab concealer onto blemishes, dark circles under the eyes, and in any other areas that need a bit of correction. Dab on a bit of concealer with your brush, wait a minute or so, then use a clean finger to lightly dab the concealer to begin blending.

makeup application for photographers 7

Concealing involves targeting small imperfections to help people look more like themselves

As a photographer, you will be familiar with color theory. Now you need to think about it for makeup. Applying concealer normally requires you to think about color theory and shading. For example, apply green to red blotches; yellow to purple-blue under-eye circles on olive or tan skin, and light purple or pink to under-eye circles on fair skin.

Try to always use a flesh-toned concealer that is the same as, or slightly lighter than, your subject’s skin to allow the ability to even out the corrections.

Correcting or balancing foundation on women

With excess oil removed and any blemishes concealed, now you will need to look closely at your female subject’s foundation. Some women use too much foundation or don’t blend foundation enough along the jawline. If either applies to your subject, moisten a wedge sponge and use it to even out the foundation using light and gentle strokes. Pay particular attention to jawlines and hairlines. Ensure any makeup lines are smoothly blended out to make them invisible.

Alternatively, some women don’t apply enough foundation. If you find this to be the case with your subject, use your largest brush (the face brush) and brush on lightly-tinted setting powder. Powder will not provide deep coverage, but it will supplement a thin application of foundation.

Blush and contour for women

If you’ve never applied makeup to another person, this is the stage where you will initially feel particularly awkward using a brush and makeup. Even people with lots of practice on themselves can feel awkward doing it on someone else.  You may want to practice in advance by brushing makeup onto white sheets of paper, particularly textured paper like those used for watercolors.

A good application of foundation, blush and contour will make the subject’s face even

When you are ready to apply blush and contour to your subject, ask her to smile. Use a medium-sized brush to apply blush from the apex of her cheeks in a very slight curve down and then back up again, almost to her ears. Apply the blush in light strokes, brushing additional makeup in thin layers until you’ve achieved a look that is only slightly more dramatic than natural.

If you are feeling adventurous and confident, use your blush or powder brush with your bronzer to lightly contour the sunken area of her cheeks from about mid-cheek back to the hair line. A little contouring can go a long way. When you begin feeling more confident applying contour, consider applying it down the middle of a woman’s nose, at her temples, and on the tip of her chin. This application will make your subject’s face look a bit thinner.

Blending for women

For good makeup application, continued blending is key. Begin with a large face brush and lightly sweep in circles to begin to blend in the edges of the blush and contour you’ve applied. Finish blending by using the face brush to lightly brush on some flesh-colored translucent powder.

Highlight and manage shine

Setting powder can be used now to add some highlights to your subject’s face and to tone down any shiny areas. To add highlights, use a clean blush or face brush (be sure you’ve cleaned it of blush and contour). Dip the tip of the brush in some rice powder and gently touch the rice powder onto the areas you wish to highlight. Then use your face brush to blend.

Adding highlights to either side of the bridge of your subject’s nose, near the inside corners of her eyes, will brighten her eyes.

If your subject has some shiny areas (this may be all you need to correct for some clients), apply some rice powder on the shine using your face brush. Go easy on the application as you can overcorrect and end up with pale looking skin.

makeup application for photographers - 6

Smooth lips are never noticed, but rough ones always are. This is an easy thing to fix before taking a photo.

Lips

The last main step is to ensure your subject’s lips are smooth and moist looking. If your subject brought lipstick, use that. If not, or if her lips need a bit of moisture or shine, use a bit of lip gloss or balm. Apply the gloss or balm with a clean concealer or lip brush. Don’t use fingers or let your subject use her fingers as more lip gloss will end up on fingers than on lips.

A little bit of makeup can really bring out the individuals inner beauty

makeup application for photographers - 5

Final results coupled with good lighting can make for images people are proud to show others

Final assessment

Once complete, and at each intermediate stage, step back and assess what you have applied or corrected. Make sure it works. You can always layer on a bit more makeup where needed, but it’s much more difficult to remove too much makeup.

Applying makeup to men

Many men won’t refuse a bit of corrective makeup even if they feel awkward about it. Remember to limit makeup application for men to concealing and managing shine. You want them to look healthy, not made up.

makeup application for photographers - 4

For men just smoothing and a light touch are all that is necessary

Blot and conceal

As before with women, use blotting paper before applying any concealer. Men often produce more and heavier oil on their faces than women. If this oil is not blotted, the concealer will come off as you attempt to apply it. The same principles for applying concealer to women applies to men. You may only need to be a bit more diligent in blending concealer over shaved facial hair.  It may be trickier too with men who want that scruffy 5 o’clock shadow look or have a day’s growth of beard.

Managing shine

Rice powder works wonderfully to matte shine on a man’s face, especially on high foreheads and bald spots. Even if you are not able to completely matte shine in those areas, rice powder will bring the shine down enough that you will have texture to work with in those areas of the photograph when retouching.

As with women, apply rice powder to men lightly with a large face brush, blend well, and check to be sure you have not created pasty-white areas. If your client’s skin tone is dark and you are trying to matte significant shine, blend a little tinted translucent powder with the rice powder before applying.

Lips

Some men have dry or flaky lips, often from spending a lot of time outside. Ask if you can apply a small amount of clear lip balm. Rub the balm in well because you don’t want shiny traces on a man’s lips.

Before finishing up, take a close look at your client. Remove smudges, makeup flakes, or lint with a cotton swab. Use your face brush or a damp disposable sponge to blend any makeup that needs just a tiny bit more blending. And use a damp disposable sponge to remove stains or lint from clothing.

makeup application for photographers - 3

The judicial use of makeup can help people feel more confident for other types of posing.

Cleaning up

Finally, always clean your brushes and cosmetics after every use. You want to have sanitary makeup and brushes. Use a conditioning brush spray or isopropyl alcohol on your brushes. Use cosmetic sanitizer or isopropyl alcohol on your cosmetics so that you can use them for others. Throw away any disposable items you used. And always wash your hands with soap and running water or with sanitizer as soon as you are finished.

In the end, the desired result is for images people are proud of. To do that a little bit of makeup knowledge helps a photographer simplify his or her processes to get the best results

Practice, Practice, Practice

Applying makeup to another person does not come naturally. There is a reason why makeup artists are paid handsomely for their work. But with a few tools, a small bag of cosmetics, and practice, you will be able to address the worst of makeup or skin flaws before you capture your client’s portrait.

makeup application for photographers - part 2

The post Makeup Essentials for Photographers Part 2 – Application appeared first on Digital Photography School. It was authored by Mark C Hughes.


Digital Photography School

 
Comments Off on Makeup Essentials for Photographers Part 2 – Application

Posted in Photography

 

This Back-to-Basics Photography Exercise can Improve Your Photography

18 Jul

The post This Back-to-Basics Photography Exercise can Improve Your Photography appeared first on Digital Photography School. It was authored by Rick Ohnsman.

The digital age has made photography easier, cheaper, and more accessible than ever before.  Even people who wouldn’t call themselves “photographers” now carry a camera in their pocket in the form of their cellphone.

However, has the ability to snap a picture without skill or knowledge made photography too easy? Even for you reading this article who’ve come to this site to learn more about making better photos – has the ease of making digital photos with modern cameras robbed you of learning the basics?

Perhaps. Presuming you really do want to learn more, give the following exercise a try with the intent of improving your skills.

This Back-to-Basics Photography Exercise can Improve Your Photography

I’ll bet back when this grocery store was operating you could buy black and white film here. Now, both are relics. I shot all of the mono photos in this article with a 50mm prime lens during a photo walk, while conducting the exercise outlined.

Back to the film days

Some of you remember the film days, but with digital photography catching hold in the early 2000s, we already have a generation of new photographers who may never have loaded a roll of film.  Others may never have had to manually focus a camera, calculate exposure without a meter, or made monochrome photos in the camera.

My first “real” camera – a 35mm Hanimex Praktica Nova 1B

As the risk of dating myself, here’s a little background:

Back in the “pre-digital days” (back in 1970 when dinosaurs roamed the earth), I was 16 and in high school. I bought my first real camera – a 35mm Hanimex Practica Nova 1B. It was an East German camera built in Dresden and imported to the U.S. The Oreston f/1.8 50mm Meyer Optik Görlitz lens was fast and sharp (though I didn’t know much about such things at the time).  It was typically loaded with Kodak Plus-X film (ISO 125, previously called ASA) or sometimes Kodak Tri-X (ISO 400).

I learned how to process the film and later make black and white prints in a little darkroom in the corner of the garage.  Working under the dim glow of a safelight, and watching the image magically appear as the photographic paper bathed in a tray of Dektol, is something young photographers today have likely not experienced.

This Back-to-Basics Photography Exercise can Improve Your Photography 3

The orange glow of a safelight and the smell of photo chemicals. Before Lightroom, there was the darkroom.

I can’t say I miss it.

Today’s cameras are far superior. Also, the ease of working at a computer using Lightroom, where you can dodge and burn with the click of a mouse instead of with physical tools, gives so much more creative freedom.  I also don’t have a wastebasket full of failed paper prints, and money spent trying to master the art.

These were things I learned the hard way with no electronic assistance from my camera. Let’s see what you can learn. Set up your camera and take a photo-walk emulating the way it used to be.

Learning to focus manually takes some skill. Note in this shot the very closest weed at the bottom of the frame is focused, but the other portions are soft. You’ll also better learn the relationship between depth-of-field and aperture when you work in manual mode.

Camera setup

We’re going to want to go fully manual for this, putting you in charge of setting the aperture, shutter speed, and ISO. So put the dial in the “M” mode.  Turn autofocus off.  You will be focusing yourself.

If you have a 50mm prime lens, that will better emulate what most of us had on those old 35mm film cameras before we could afford to buy a zoom.  Composing with the “sneaker-zoom,” (that is, using your feet to move closer or further from your subject), is good practice, especially if you always rely on a zoom lens to compose.

Working with a prime lens will help teach you to compose without relying on a zoom.

Going Monochrome

Most beginning photographers, (and all of them in the pre-color era), shot black-and-white film. So to stick to the basics, we’ll be shooting monochrome as well.

Well, sort of.

The best option in a digital camera is to shoot in RAW mode, which will create a color image.  Later in editing, you’ll make a monochrome image from that color file.  Photographing for monochrome will also allow you to better concentrate on composition – another point of this exercise.

Photography Exercise can Improve Your Photography 4

It is thought the term “chimping” originated from the “ooh, ooh” sounds photographers made when reviewing their photos on their LCD screens, (not necessarily as in this case, whether the photographer had a simian-like appearance  :-D.   For this exercise, you will NOT be chimping.  – Photo of/by Rick Ohnsman.

To chimp or not to chimp?

You’ve heard the term “chimping” which refers to the practice of some digital photographers to look at the playback on their LCD screen after each shot?  Some scoff at the practice.  Others, (count me in that camp), think the ability to immediately review a shot, check the histogram, make adjustments and reshoot is the best thing to ever happen to photography.  Instant feedback, (rather than waiting days, weeks, months, whatever it was to get back the photos and only then discover your mistake?) – what a concept!

I still bow to the wedding photographers who shot film.  Those photographers knew their cameras relying on skills and experience so they could trust they had the photo before ever seeing the results.

Many cameras will do this. This is a Canon 6D. Set your Picture style to Monochrome, but shoot Raw images. The Raw file will be in color but the LCD display, (both in playback and Live View) will be Monochrome.

So… a choice for you as you do this exercise –  You have two options:

Option 1:

Shoot Raw, but set your camera so the image played back on the LCD (which is a .jpg thumbnail) is shown in monochrome

On a Canon camera, you will be using Picture Styles.  On a Nikon, Picture Controls is the term.  Look for Monochrome in the menu.  What you’ll be doing is taking a Raw color image but forcing the camera to playback a monochrome image on the LCD.

Check your camera manual for how to set this up.

The advantage is being able to see a monochrome image in playback rather than having to previsualize what it will look like.   Because your raw file will still be color, you will have more control in editing.  Should you decide you do prefer the color image, you can stick with it and not convert to black and white.

If you shoot .jpg only, your image will be monochrome with no going back.

Flexibility – it’s just one more of dozens of reasons to shoot raw images.

Or …

If you set your Image Review to “Off”, the photo will not be displayed in the LCD after you take it. Film photographers didn’t have the luxury of image review in the field and for this exercise, you won’t either.

Option 2

Turn off or tape over the LCD screen

If you really want to emulate shooting film, (and get the most from this exercise), you will not chimp at all.  There was no option to review your shots with film. The photographer had to trust their knowledge and instincts.

For those who’ve only made digital photos, (and even for those who may have used film but haven’t done so for a long time), this is harder than it might seem.  The reward, however, will be learning to analyze the scene better, make necessary camera adjustments, and trust your instincts.  You will make mistakes and not know about them until later, but lessons learned with a little “pain” attached will be those you’ll best remember.

I’m not suggesting you always work like this, instant LCD feedback is a beautiful thing. However, when practicing this exercise, see what it can teach you.  (Don’t forget to turn your LCD Review back on completion of the exercise!)

Photography exercise

With the Picture Mode in Monochrome, both Live View and Image Playback on the LCD screen will be Monochrome even though the Raw file will still record in color.

When more isn’t better

Another great thing about digital photography is how many images you can fit on a storage card.  Depending on the camera and the card size that can easily be hundreds, even thousands in some cases.  You also don’t have to worry about each shot costing you more.  If you don’t like what you see, that’s what the delete button is for.

Cards are reusable. Once you buy one, you can use it over and over.

As the saying goes, “digital film is cheap.”

Monochrome will help you better compose and concentrate on line, shape, tone, and texture. Also, note how simulating a red filter when editing allowed the blue sky to render very dark.

Shooting film wasn’t cheap.  There was the cost of the film, the cost of film processing, and the cost of printing.  Nothing was reusable, and so all the shots, both the keepers and the junk, cost money.  With digital, we also need not print if we don’t like a shot.

It was hard to view a film negative and judge what you had.  Unless you were printing your own images, you’d almost always print everything and prints cost money.  Some of us shot transparencies (slides). These were a little cheaper since you’d typically not print them. However, you had to get it right in camera as there was no editing a slide.

Beginning film photographers could spend lots of money learning with little to show for it.

There was also the limitation of how many photos could be made on a roll of film. The capacity typically measured in dozens, not hundreds or thousands of images like digital media.  If you used 35mm film, you could typically get 12, 24, or 36-exposure rolls.  With limited exposures and to save money, photographers wanted to make each shot count.

The downsides were making fewer images, (and thus reducing the odds of getting a keeper), less experimentation with new techniques, and a longer learning curve for a new photographer who’d be making fewer photos.  The upside, however, (and this is a big factor), was photographers took more time to do it right – more time to think before pressing the shutter button.

Putting it all together

Are you ready to give this exercise a try?

I’d suggest not doing this in a session that’s important to you. If you are doing it right, you’re apt to make some mistakes.  That’s okay, those will be mistakes from which you can learn.

Here are your settings and steps:

Camera in “M” – Manual Mode – You will control ISO, Aperture, and Shutter Speed

Autofocus Off – Focus with the focus ring.  Learn to see and concentrate on what you’re focusing on.  A mistake I often see new photographers make when learning to use an autofocus digital camera is letting the camera select the default center focus point when that may not be the spot they wanted in focus. Manually focusing puts you in charge of what’s in focus.   Also, consider when you might need to use your aperture to increase or decrease your depth-of-field.

Determine your lighting conditions and chose a “film type” ISO – Choose ISO 125 for bright daylight (emulating Kodak Plus-X or Ilford FP4), ISO 400 (to emulate Kodak Tri-X or Ilford FP5). If you’ll be photographing in low light, try ISO 800 and emulate “pushed” film.  The point here is set it once and leave it there for the entire session.  It wasn’t possible to change ISO with film, you were stuck with your choice for the entire roll.

Use a prime lens if you have one – Learn to compose without a zoom.

Decide how many exposures you have – Pick 12, 24, or 36.  Sure, film photographers often carried multiple rolls, but this exercise is designed to help you make each shot count.  Once you hit your pre-determined number, you’re done.

Here’s what came in a box of Kodak Plus-X or Tri-X film. Can you use this to calculate exposure and not rely on your camera meter? Give it a try!

Calculate Exposure – By the 1960s, most 35mm film cameras had light meters, but they were primitive by today’s standard.  A “match-needle” system where a needle could be centered when dialing in exposure and shutter speed was what many displayed.  If you wanted to purposely over or under-expose a bit, you’d adjust until the needle was over or under as desired.

On cameras without meters, many relied on the chart typically found in a box of film.  Often, these calculations were based on what was called the “Sunny 16 Rule.”  It said that on a bright sunny day if you put the aperture at f/16, then the shutter speed should equal the ASA, (now ISO), film speed.

For example, with Kodak Plus-X ASA 125 film a setting of ASA 125, f/125 at f/16 would give you a well-exposed image.  If you wanted to shoot at a different shutter speed or aperture, you could calculate from there. For example, f/250 @ f/11 (assuming you had the same ASA 125 film in the camera) would be an equal exposure.

If it wasn’t a bright sunny day, you were in the shade, or light conditions were different, sometimes the little printed chart could help.  Mostly, it was the practice that taught a photographer what was “about right” for a given film and a given lighting condition.

That’s another purpose of this exercise; to help teach you what’s about right for a given lighting condition.  See how you do without relying on the meter. At least pay close attention to what the aperture and shutter speed is for a given set of conditions.

Slow down

If this exercise teaches you nothing else, learning to slow down will make it worthwhile.  With limited exposures available on a roll of film, the “spray-and-pray” style of photography was rare.  Typically it was only sports and fashion photographers who had motor-drives (the mechanical version of what we now do with continuous mode).

Photographers took the time to carefully think about their composition, and what they wanted to convey with the image. What shutter speed choice might be best to freeze or blur the action?  How much depth-of-field might you desire and what aperture choice would be best?  Should you roll in a little exposure compensation?

All of these factors were given thoughtful consideration.  Bracketing shots to be sure everything was right could be done but at the expense of more quickly eating up that roll of film.  The difficulty of fixing anything in the darkroom was much greater too, and photographers didn’t have the attitude that they’d “just fix it in Photoshop.”  Consequently, the concept of “getting it right in-camera” was the norm.

Getting it right in-camera is among the goals intended with this exercise.  If you know you only have a minimal number of exposures available to you, each one has to count.  You won’t have the luxury of shooting, chimping, adjusting, and re-shooting if you’re doing this exercise as intended.

So, slow down, take your time, think about each part of the process. And then make your best shot.

Later, you will have a real advantage film photographers didn’t have – the ability to review your images with attached exposure data.

In the film days, conscientious beginning photographers carried a notebook and wrote down their settings to recall later.  Now, your digital camera keeps the notes.  Chalk up one more plus for digital photography.

Why monochrome?

We briefly touched on why monochrome was the choice for this exercise.  One, of course, is that it replicates what early beginning film photographers used and we are simulating the limitations of that time.

The more significant reason is without color, monochrome images rely much more on shape, form, line, tone, and texture.  It is also much easier to concentrate on composition without the added distraction of color.

Working in monochrome can help a photographer better key in on those elements that make a strong image and practice those techniques.

If you’ve done much monochrome photography, you’ll likely already know this.  If you’ve pretty much only made color images in the past, this part of the exercise will also be part of the process of improving your skills.

Back in edit

Film photographers typically dropped their film off at the lab, mailed it in, or sometimes did their own processing.  (I love the smell of D-76 in the morning!  It smells like… Victory.  – Not!  Sorry for the flashback, let’s resume).

You will come back with a few, (you limited your exposures as instructed, right?), Raw images on your storage card.  They will be in color, but you’ll be converting them to monochrome.  I will not spend the time in this article outlining the best ways to convert color to monochrome.  You will find a nice collection of those tutorials here on DPS.  You will find there are great ways to manipulate the tones in your monochrome conversion to create distinctive looks.

To complete the goals of the exercise, what you’ll want to give the most attention to is, were you able to make well-focused, properly-exposed, and nicely composed images with the self-imposed restrictions of the exercise?  Without the electronic assistance of a modern digital camera (auto-focus, auto-exposure), what worked?  What didn’t?

If this really had been film, what would you do differently next time?

The takeaways

This is a great time to be a photographer.  The sophistication of our cameras and the ease with which we can do amazing things in editing is fantastic.  The point of this exercise, however, is to teach you to use your brain as a photographer, to take full control over your camera, and not rely on a microchip to do it for you.  I personally would never go back to film, have no desire to get back in a darkroom, and love every electronic aid my camera supplies.

The point is, I want those things to build on a solid foundation of photo ability and knowledge.  That is the reason for this exercise.

The path to becoming a better photographer lies in using your brain, not a camera microchip, to do the thinking. Slow down, pre-visualize the image, and then use the camera as a tool to capture that vision.

I sincerely hope you give this a try.  If you make great images, wonderful!  If you struggle and make mistakes, fine – you will have learned something.

Either way, you will grow as a photographer.

Drop me a line in the comments and let me know how you made out.  Best wishes.

 

This Back-to-Basics Photography Exercise can Improve Your Photography

 

The post This Back-to-Basics Photography Exercise can Improve Your Photography appeared first on Digital Photography School. It was authored by Rick Ohnsman.


Digital Photography School

 
Comments Off on This Back-to-Basics Photography Exercise can Improve Your Photography

Posted in Photography

 

Sony Announces Incredible 61-Megapixel Full-Frame Camera: The A7R IV

18 Jul

The post Sony Announces Incredible 61-Megapixel Full-Frame Camera: The A7R IV appeared first on Digital Photography School. It was authored by Jaymes Dempsey.

sony a7r iv

Sony just recently announced its latest mirrorless camera:

The Sony A7R IV, which has already generated a massive amount of anticipation, excitement, and discussion.

Note that the A7R is the latest mirrorless body in Sony’s immensely popular A7 series, which includes the likes of the A7R III (which is no slouch when it comes to professional-quality shooting!). The A7R IV is also going up against several big competitors, including the Nikon Z7 and the Canon EOS R.

So what makes the Sony A7R IV so special?

While the A7R IV is clearly an excellent camera, there’s one thing that immediately captures attention:

The resolution.

The Sony A7R IV features an amazing 61-megapixel sensor, which will be the highest pixel count on a full-frame mirrorless camera that the world has ever seen. Note that this 61-megapixel offering is over a dozen megapixels more than the previous record-holder for full-frame resolution, the Panasonic S1R, at 47.3 MP. Also, this is nearly a 20 MP upgrade over the Sony A7R III.

What does this mean for photographers?

First and foremost, you’re going to capture high amounts of detail, and this leaves an amazing amount of room for work in post-processing, such as cropping.

(Note that the Sony A7R IV has a cropped-sensor mode, which still gives you 26 MP images.)

Now, the huge megapixel count results in huge file sizes, and it should have correspondingly slow frame rates and a very limited buffer. Except that Sony has pulled out all the stops so that the A7R will shoot at 10 frames-per-second for up to 7 seconds.

This means that this professional-level camera may appeal to both landscape and sports photographers, something that happens very rarely on high-end camera markets.

Autofocus is guaranteed to be strong, with 567 phase-detect autofocus points, plus Sony’s built-in eye-tracking.

Other features in the A7R IV include:

  • A 15-stop dynamic range, for photos that span the spectrum of tones
  • 4K movie, though only at 30p
  • 5-axis image stabilization, promising over 5 stops of increased sharpness
  • An improved electronic viewfinder
  • Dual card slots

If this isn’t a beast of a camera, I don’t know what is. It’ll come out in September; as expected, it’ll have a sizable price tag: $ 3500USD.

So, I’d love if you could tell me in the comments:

  • What do you think about the Sony A7R IV? Could you see yourself using it?
  • Would you like a 61 MP camera? Or would you prefer to stick to lower resolutions with smaller file sizes?
  • Is there anything missing from this camera?

Note: There is a poll embedded within this post, please visit the site to participate in this post’s poll.

The post Sony Announces Incredible 61-Megapixel Full-Frame Camera: The A7R IV appeared first on Digital Photography School. It was authored by Jaymes Dempsey.


Digital Photography School

 
Comments Off on Sony Announces Incredible 61-Megapixel Full-Frame Camera: The A7R IV

Posted in Photography

 

How to Take High Quality Product Photos With Your Smartphone

18 Jul

Smartphone camera technology has gone through an incredible evolution over the last several years. If we think back to how comparatively primitive our phone cameras used to be (certainly by today’s standards), what you get with a mid to high-end smartphone nowadays is quite remarkable. So remarkable that when compared side by side, photos from something like the iPhone X, Continue Reading

The post How to Take High Quality Product Photos With Your Smartphone appeared first on Photodoto.


Photodoto

 
Comments Off on How to Take High Quality Product Photos With Your Smartphone

Posted in Photography