RSS
 

Archive for the ‘Uncategorized’ Category

DPReview TV: Fujifilm X-T3 vs Panasonic GH5 video comparison

06 Sep

Now that the Fujifilm X-T3 has launched, DPReview TV’s Jordan Drake puts it up against the venerable Panasonic DC-GH5 to see how their video features and quality compare. If you don’t mind the large download, a low compression version of the above video can be found here.

And if you haven’t seen them, don’t miss Chris and Jordan’s first look at the X-T3, as well as our own First Impressions Review.

Subscribe to our YouTube channel to get new episodes of DPReview TV every week.

Subscribe to our YouTube channel

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DPReview TV: Fujifilm X-T3 vs Panasonic GH5 video comparison

Posted in Uncategorized

 

Fujifilm X-T3: what you need to know

06 Sep

The Fujifilm X-T3

The X-T3 is Fujifilm’s newest X-series camera, and potentially represents the largest jump in features and performance that we’ve seen in a new Fujifilm camera in quite some time. It boasts a new sensor, faster processor, a significantly improved autofocus system, and video specs that move it close to best-in-class territory.

In short, Fujifilm seems to have taken a no-holds-barred approach to designing this camera, and what the company has delivered is impressive both on paper and in your hands. Let’s take a look at some of the headline features worth knowing about.

Body and Controls

The X-T3 is visually similar to its predecessor, the X-T2, though it has a slightly redesigned handgrip. The top plate has the usual Fujifilm dials for ISO, shutter speed, and exposure compensation, and the rear features a tilting touchscreen.

The body includes both a microphone and a headphone jack, along with USB-C and micro HDMI-out ports. The door over these plugs can be completely removed when using the camera with attached cables so that it doesn’t get in the way or break, a nice nod to videographers who may want to use the camera rigged with microphones, headphones, or an external recorder.

On the opposite side of the camera are dual-SD card slots that support UHS-II and V60/V90 cards.

New X-Trans Sensor

The X-T3 uses a new 26.1MP X-Trans backside illuminated CMOS sensor. Although not significantly different in terms of resolution compared to the X-T2’s 24MP sensor, this appears to be a sensor we haven’t seen in other cameras, so we’re looking forward to our testing in order to learn more about its performance.

The new sensor now has a base ISO of 160, compared to 200 on previous Fujifilm models.

Fujifilm tells us that this new sensor has 10x faster readout than its original X-Trans sensor, which is particularly important for some of the camera’s new capabilities.

X-Processor 4

In addition to a new sensor, the camera includes a new quad core CPU, called the X-Processor 4. Fujifilm claims it’s 20x faster than the original X-Processor in the X-Pro1 and 3x faster then the X-Processor Pro found in the more recent X-H1.

The improved speed is apparent when using the camera as it’s quite responsive. Between the new sensor and the new processor, the camera is able to offer significant performance over its predecessors in both photo and video modes.

Autofocus

Fujifilm cameras don’t have a reputation for class-leading autofocus performance, but the X-T3 may be the camera that challenges that perception.

It has 425 phase detect autofocus points that provide 99% vertical and horizontal coverage when using single-point AF. Zone and wide tracking modes provide a slightly smaller 91% horizontal x 94.5% vertical footprint, but that’s still pretty impressive. AF points are split into 240 regions, and the system looks at regions both horizontally and independently (for textures). Phase detect AF works down to -3EV (lens not specified), which is two stops better than the X-T2’s -1EV.

In our initial use of the camera we’ve been been very impressed with the new autofocus system

Fujifilm says that improved processing speed, along with an entirely new focusing algorithm, allow the camera to focus 1.5x faster than the X-T2, enabling accurate autofocus even when photographing subjects that change speed or move erratically across the frame. It also claims to have improved face detection, supports eye-detection in AF-C mode, and says that new face/eye detection algorithms are 2x faster. Face detection is also available when shooting video. However, if there are multiple faces in a scene there doesn’t seem to be a way to tell the camera which specific face you want to track.

In our initial use of the camera we’ve been been very impressed with the new autofocus system, finding it to be fast and very effective at tracking subjects – in some ways very similar to the 3D tracking on Nikon’s DSLRs. We’ll have to do a lot more testing before we can provide a definitive analysis, but it’s fair to say that it’s a clear step up from the AF system on previous Fujifilm bodies.

Photos

At 26.1MP, the X-T3 has only a bit more resolution than its predecessor, though it’s not enough that you’ll notice a significant difference in image quality from that change alone. However, Fujifilm has made other improvements for still photography that are worth noting.

The camera continues to support all of Fujifilm’s excellent film simulation modes, but now includes the company’s Color Chrome effect. This was first introduced on the GFX 50S, and is designed to provide improved color gradation in shadow areas that can be difficult to reproduce – on vivid flowers with shadows, for example. There’s also a monochrome adjustment option that lets you apply a warm or cool tone to your black and white photos, with nine levels of adjustment in each direction.

The X-T3 continues to use Fujifilm’s X-Trans sensor technology, as opposed to the more common Bayer pattern color filter arrays

Now that ISO 160 is part of the standard ISO range (on previous Fujifilm cameras it was available only as an extended setting) it’s also possible to capture photos using the DR400% mode for improved dynamic range at ISO 640 instead of ISO 800.

Also new, Raw files now have medium sized (13MP) JPEG previews embedded instead of small JPEG previews, which should make it easier for Raw shooters to review photo details in-camera.

The X-T3 continues to use Fujifilm’s X-Trans sensor technology, as opposed to the more common Bayer pattern color filter arrays found on most cameras. Suffice it to say, if you like X-Trans you’ll probably still like it on this camera as well. (Or vice versa.)

Video

Video is arguably the area where the X-T3 makes its most significant advances, with features and specifications that have the potential to put it into class-leading territory alongside models like the Panasonic GH5.

To start, the camera supports 4K/60p recording, including both DCI (4096×2160) and UHD (3840×2160) standards. Video can be captured at 4K/60p in 4:2:2 10-bit color via HDMI out, and in 4:2:0 10-bit color when recording internally. You also have the choice of using either H.264 or the newer H.265/HEVC codec, with data rates up to 400Mbps, and can choose between All-Intra or Long-GOP recording settings. Shooting video at 400Mbps will require cards that meet the V60 standard.

The X-T3 uses the full width of its sensor to record oversampled 4K video at frame rates up to 30p

Most of these settings can be mixed and matched, creating an impressive array of possible configurations, but there are some restrictions. (For example, 10-bit recording requires use of the H.265 codec.) It’s possible to record 4K/60p internally at up to 200Mbps while simultaneously recording externally over HDMI.

The camera uses the full width of its sensor to record oversampled 4K video at frame rates up to 30p. There’s a slight 1.18 crop when shooting 4K/60p, which Fujifilm tells us is done in order to maintain the fast scan rate on the sensor.

For slow motion work it can shoot up to 1080/120p, though this comes with a 1.29x crop of the sensor. This feature was also available on the recent Fujifilm X-H1, but that camera needed to upscale the image a bit in order to do so. In contrast, the X-T3 doesn’t have to upscale, but Fujifilm needed to use a slight crop of the sensor to avoid doing so.

According to to Fujifilm there’s also a new noise reduction algorithm, including 4K inter-frame noise reduction, and it claims the camera can capture up to 12 stops of dynamic range when shooting video.

Video

In addition to an impressive array of resolutions, data rates, and other options, the X-T3 offers a number of tools and features that should be popular among videographers.

The camera includes Fujifilm’s F-Log gamma profile, which can be used either via HDMI or for internal recording, as well as the very pleasing Eterna film profile, which we’ve found makes a great starting point for color grading if you don’t need to use F-Log. Since the X-T3 has a base ISO of 160, the minimum sensitivity for shooting F-Log has also been lowered to ISO 640, compared with ISO 800 on previous Fujifilm cameras.

Movie mode also includes the Silent Control feature found on the X-H1

Fujifilm says the sensor’s scan rate is a very quick 17ms, which should provide very good rolling shutter performance and puts the camera into similar territory as the impressive Panasonic GH5 (13ms).

Movie mode also includes the Silent Control feature found on the X-H1, which makes it easy to access video settings using the touchscreen, and also provides a method to retain separate settings for shooting stills and video.

The X-T3 does not include support for Hybrid Log Gamma (HLG) at launch, however Fujifilm says this will come in the form of a firmware update by the end of the year.

Electronic Viewfinder

The X-T3’s electronic viewfinder is built around a 3.69 million-dot OLED with 0.75x magnification. This is slightly lower than the 0.77x magnification found on the X-T2, but Fujifilm says they needed to drop the magnification a tiny bit because the new EVF panel is physically larger and requires slightly different optics.

The EVF has a native 60fps refresh rate, but can increase to 100fps in Boost mode without a battery grip attached, unlike the X-T2 which required a battery grip for full Boost mode. It has a 23mm eye-point, the same as the X-H1, and the diopter correction knob must now be pulled out in order to turn it, making it unlikely that it will be inadvertently moved by rubbing against something.

Metering and Focusing

The X-T3 is able to meter and focus at the same time by separating the phase detect AF measurements from the camera’s exposure control.

Different lines on the sensor are used to perform autofocus and exposure measurements, reading out at different rates and processing both sets of information in parallel without affecting one another. This gets around the need to switch back and forth between focusing and metering functions, which in certain cases can result in noticeable effects.

For example, when focusing in low light, many mirrorless cameras will briefly show an overexposed image while acquiring focus because they’re using the same pixels for AF and exposure measurements and need to increase sensor gain in order to acquire focus. In contrast, the X-T3 has no need to make this temporary adjustment as it’s using different pixels for each function.

We were able to see this in action through an informal test of the camera. We set the exposure low enough that the viewfinder was completely black, but the camera was still able to lock focus on a subject in the frame without any change in the viewfinder. This implementation contributes to a very pleasing user experience.

Sports Finder Mode

The X-T3 also has a Sports Finder mode, which can be useful when shooting things for which performance is a priority, such as sports or wildlife. A 1.25x crop effectively turns the X-T3 into a 16MP camera and the EVF provides clear frame lines to see the cropped area. You can still see outside the cropped area, however, and this can be very helpful as you’re able to see things that are slightly out of frame and anticipate their entry into the scene.

Sports Finder mode can be very useful for burst shooting and supports 10, 20, and 30fps burst modes, recording up to 33 Raw images or 60 JPEG images at 30fps, with an EVF blackout of 90ms. A pre-burst mode can also start shooting images as soon as the shutter button is half-pressed.

Performance

Fujifilm claims the X-T3 has the ‘highest performance in the history of the X-series’. In continuous shooting mode it can capture 11fps with continuous AF using the mechanical shutter, up to 36 frames, or 20fps using the electronic shutter, up to 34 frames. Neither requires the use of an additional battery grip.

Unlike the X-T2, it’s not necessary to have a battery grip attached to fully utilize Boost mode, which increases autofocus speed and increases the EVF frame rate to 100fps.

The X-T3 uses the same NP-W126S battery as other recent Fujifilm models and has a CIPA rating of 390 images, though as with most cameras we expect to get more in practice.

Battery Grip

A new battery grip, the VG-XT3, can be paired with the camera for those who want additional controls for vertical shooting or need additional battery power. It holds two additional batteries to increase the maximum number of shots to 1,100.

The vertical grip includes a shutter release button, focus lever, AE-L button, AF-L button, front and rear command dials, Q button and Fn button so that you have all standard controls available when shooting vertically. It’s dust and weather resistant and is rated to operate in temperatures as low as -10C/14F.

Additionally, there’s also a new metal hand grip which is designed to make the camera more comfortable to hold when using larger lenses. It’s designed so that you can replace both the battery and SD cards without removing it, and the base can be used as a quick release shoe when using a dovetail mount on a tripod.

Night Vision Mode

A new Night Vision mode shifts the display from its standard appearance to a predominantly red mode that’s easier on your eyes in low light conditions. It’s a bit of a specialized feature, but one that will likely be appreciated by those who shoot frequently in low light.

Pricing and Availability

The Fujifilm X-T3 is launched with an MSRP of $ 1499 body only, or $ 1899 with the included Fujifilm 18-55mm F2.8-4 R LM OIS kit lens, and will ship on September 20.

We’ve already started testing the camera and look forward to bringing you our full in-depth review soon. Until then, we encourage you to read our Fujifilm X-T3 First Impressions Review to see what we think so far.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm X-T3: what you need to know

Posted in Uncategorized

 

DPReview TV: Fujifilm X-T3 hands-on first impressions

06 Sep

Join Chris and Jordan for a first look at Fujifilm’s powerful new X-T3, which offers greatly improved autofocus, 10-bit internal 4K recording and several other refinements compared to the popular X-T2.

Also, make sure to read our in-depth Fujifilm X-T3 First Impressions Review.

Read our in-depth Fujifilm X-T3 First Impressions Review

Subscribe to our YouTube channel to get new episodes of DPReview TV every week.

Subscribe to our YouTube channel

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DPReview TV: Fujifilm X-T3 hands-on first impressions

Posted in Uncategorized

 

Report: Multi-camera smartphone segment growing at record pace

06 Sep

If you thought multi-camera modules on smartphones were nothing but a fad, think again. Two recent reports by analyst firm Counterpoint Research and The Korea Herald tell a different story.

According to the analyst report approximately 42% of all smartphones sold globally in July 2018 featured a dual or triple rear camera. The firm estimates that the adoption of multi-camera modules will grow to 60% by the end of the year and says that “while the megapixel war has almost peaked, multiple sensors in phones is the new battleground.

Graph: Counterpoint

Growth in the multi-cam segment has been fast paced, with penetration increasing from 15% to 42% in the last 12 months, and is highest in the price range from $ 200 to $ 599. In the “super-premium” segment ($ 800+) adoption has reached 100%.

The charge is lead by OnePlus, followed by Huawei and Apple. Google is the only premium manufacturer still betting on single-camera but is under increasing pressure to join the multi-cam movement.

A report by The Korea Herald confirms Counterpoint’s view of the market, stating that “Most major smartphone makers, including Samsung Electronics, Apple and LG Electronics, are reportedly preparing to roll out smartphones fitted with three rear-facing camera modules in a bid to step ahead in the premium segment.”

According to Samsung around 10% percent of its 2019 smartphones are likely to come with triple-camera technology. Unsurprisingly the performance increase through multiple cameras comes at a cost, though. At a manufacturing level the cost of a typical single-lens module is approximately $ 10. Dual- and triple-lens camera modules add $ 30 and $ 50, respectively, to the bill of material.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Report: Multi-camera smartphone segment growing at record pace

Posted in Uncategorized

 

The Canon EOS R isn’t a mirrorless 5D IV, but it’s a start

06 Sep

What you need to know about the Canon EOS R

Canon’s much-anticipated, long-rumored and at this point very leaked full-frame mirrorless camera is finally here. The Canon EOS R debuts a brand new ‘RF’ mount and a 30MP CMOS sensor, with Dual Pixel CMOS autofocus and 4K video.

Despite Canon’s claims that the EOS R is ‘the internals of an EOS 5D IV in a smaller body’, the EOS R is not exactly the mirrorless EOS 5D IV that a lot of people were predicting (and hoping for) but it’s not the mirrorless Rebel that some cynics were predicting, either. If anything, it’s more like a slightly evolved mirrorless 6D II and – spiritually at least – it appears to have a lot in common with a much, much older camera.

With the dust only just settling after the recent launch of Nikon’s Z7, what should you take away from Canon’s latest ILC? Click through this article for some initial thoughts, and a closer look at the EOS R’s key features.

30MP full-frame sensor

Arguably the most important single component of any digital camera, and even more important in a mirrorless ILC, is the sensor. The Canon EOS R uses a 30MP full-frame CMOS chip with a low-pass filter which produces images with the exact same output dimensions as – and may in fact be a close relative of – the sensor used in the 5D Mark IV. The sensor is paired with an Digic 8 processor.

The EOS R’s standard ISO sensitivity range of 100-40,000 is very similar to the 5D IV’s

Assuming we’re right about the sensor being closely related to the one in the EOS 5D IV (pending lab testing), it’s not a bad thing. The 5D IV’s sensor isn’t up there with the best full-frame sensors on the market when it comes to either resolution or dynamic range, but it’s better than the 26MP sensor in the 6D II and it’s arguably the best all-round sensor in Canon’s inventory (the 5DS/R offer higher resolution but lower dynamic range and the EOS-1D X Mark II trades resolution for speed and sensitivity). The EOS R’s standard ISO sensitivity range of 100-40,000 is very similar to the 5D IV’s, too, the two cameras offer the same absolute maximum ISO sensitivity of ISO 102,400.

The EOS R offers Dual Pixel RAW, plus Canon’s 14-bit CRW Raw format as well as the relatively new C-Raw, which provides full resolution but much smaller file sizes.

New ‘RF’ mount

The Canon EOS R debuts a brand new lens mount – Canon’s fourth ‘full-frame’ mount, if you include the long since retired manual focus FL/D and R. The transition from FD to the totally new (and totally incompatible) electronic EF mount in the late 1980s was quite a jolt for some long-time Canon shooters, but EF to RF looks like it’ll be considerably smoother.

Like the 30+ year-old EF mount, the RF mount is based around a throat diameter of 54mm but with a much shorter flange-back distance of 20mm (compared to 44mm). This is compared to 46mm and 18mm for EF-M, and the longer flange-back distance of the full-frame RF standard would appear to make Canon’s two mirrorless mounts incompatible with (i.e., unadaptable to) one another.

No EF-M compatibility

The lack of EF-M cross-compatibility is a bit surprising. It forecloses the possibility of anyone using EF-M lenses on a hypothetical future APS-C format EF-R camera, essentially closing off the much vaunted APS-C to full-frame ‘upgrade path’ for Canon’s mirrorless customers.

Canon’s long-term interest in APS-C mirrorless has always looked a little shaky – could the EOS-M line be left to quietly die, in the same way as Nikon’s 1 system? We hope not. More likely in the short term (but still a bit odd, however you look at it) is that Canon will pitch its EF-M cameras as a solution for those photographers that want the convenience and size advantages of APS-C, with RF as a full-frame mirrorless system running (kinda, sorta,) in parallel.

If nothing else, the simultaneous announcement of a 32mm F1.4 for the EOS M-series is an indication that Canon wants us (you) to know that it’s still taking EF-M somewhat seriously.

EF to EF-R adapters

On the other hand, converting EF lenses to the EF-R mount is easy, courtesy of no less than three adapters, all of which do basically the same thing. The most basic is a simple mount converter, with an additional two adapters which add an extra control ring, and a tray for drop-in filters, respectively (the latter is pictured above). These adapters allow EF and EF-S lenses to be used on the EOS R without limitation.

Sadly, because of its relatively (for a mirrorless camera) deep flange-back, the RF mount will not be capable of accepting as many adapted third-party lenses as the super wide, super shallow Nikon Z mount. Neither Sony E nor Nikon Z-mount lenses will ever be an option for use on the EOS R or later cameras, for example.

5,655-position Dual Pixel CMOS AF

Canon’s continually-improving Dual Pixel CMOS autofocus has impressed us for years, and the system included in the EOS R is without doubt the most impressive iteration we’ve seen so far. Covering 100% of the frame vertically and around 88% horizontally, and rated down to -6EV (with an F1.2 lens) the EOS R’s autofocus chops are impressive. More importantly, the EOS R always focuses wide open, even in 5 fps bursts: this helps the AF system continue to function optimally in low light even if you’re shooting stopped down.

While 5000+ selectable AF positions might look like overkill, we’re excited to see the difference it makes to precise tracking. That many on-sensor phase-detection AF points does represent an awful lot of data for the EOS R’s processor to move around, though.

Autofocus performance

From our initial impressions, autofocus appears very accurate. Autofocus speed is good: focus is snappy and even in continuous AF the system is quick to refocus on moving subjects, as long as your lens is up to the task.

What will probably slow you down more than the outright AF speeds, though, is the overall method for selecting your AF point or subject: you’ll have to drag your thumb around the touchscreen, and given the touchscreen’s laggy responsiveness, this will be an issue.

Canon EOS R autofocus modes

There’s a ‘Pupil Detection’ mode to ensure eyes are in focus but this is only available in AF-S mode. Disappointingly, like all mirrorless systems so far, the EOS R does not offer flash AF assist when a compatible Speedlite is attached.

Speed and continuous shooting

Sadly, no current mirrorless camera can boast the ‘instant on’ experience of a good DSLR, and the EOS R is no different, with a startup time of 0.9sec. On the face of it, the Canon EOS R’s continuous shooting performance is fairly unremarkable, too. A maximum framerate of 8 fps with focus locked isn’t going to set the world on fire, and nor is 5fps with AF tracking or 3 fps in the higher-precision ‘tracking priority’ mode. Remember what we said earlier about all that data from so many Dual Pixel CMOS autofocus points stressing the R’s processor?

While the EOS R isn’t exactly a speed demon, with a UHS-II card installed it does offer a halfway decent buffer

To be fair, the general experience of taking pictures is really nice, with virtually no blackout between shots, and AF tracking seems to be very good at 3/5fps. But it doesn’t look like the EOS R will trouble the wallets of action photographers any time soon. While the EOS R isn’t exactly a speed demon, with a UHS-II card installed it does offer a halfway decent buffer of 100 JPEGs (large/fine) and 47 Raws.

Our bet? There will be a speed-focused mirrorless EOS-1D type camera launched in time for the Tokyo olympics in 2020, alongside a similarly pro-oriented Nikon Z-mount competitor.

Handling and design

Just like the Nikon Z series, the EOS R makes a lot of effort to accommodate existing DSLR shooters, with a dial layout and menu system that will be immediately familiar.

But, also like the Nikons, it also switches to using its maker’s live view AF system, user experience and nomenclature. This won’t be quite such a shock for Canon users, since the Dual Pixel DSLRs were pretty usable in live view mode (and, in the case of the EOS 80D, arguably better when used that way). But it still means it won’t be as easy to jump back and forth between shooting a Canon DSLR and using the EOS R as Canon likes to imply.

This image shows the optional BG-E22 battery grip. The BG-E22 can hold two LP-E6N batteries, effectively doubling battery life.

Handling and design

The build quality and grip shape are immediately impressive when you first pick up the EOS R. It’s built with a magnesium alloy shell over a magnesium alloy body and it has a real sense of quality to it. Changing exposure parameters feels immediate – like a DSLR.

However, while the build feels premium, the lack of AF joystick hints at this model’s slightly more modest status. We’re also told the weather sealing is more 6D than 5D standard.

On the production-spec cameras we used, the touchscreen interface was laggy and rather slow to use

Without an AF joystick, you’re pretty much required to depend on the touchscreen-based touchpad AF. This is pretty customizable, allowing you to choose ‘relative’ or ‘absolute’ positioning, and also limiting the active area of the touchscreen. But on the production-spec cameras we used, the touchscreen interface was laggy and rather slow to use, which makes the camera as a whole slower to operate.

The touchscreen can also feel laggy in playback mode. But that’s not the only thing that feels laggy about the camera: as the EOS R is writing to the card, some camera functions, like switching to playback mode, can feel very slow to operate.

Protective measures

One interesting first for a mirrorless camera is that the EOS R closes its mechanical shutter when the camera is turned off, perhaps to reduce the risk of dust on the sensor. Canon recommends always turning off the camera when changing lenses, as a consequence.

We’ve always been told that the glass cover is much stronger and harder to damage than the delicate mechanical shutter blades, which makes this an interesting decision. The camera also stops its lens down on shut-down and shows a warning not to leave it pointing at the sun with a lens cap off, presumably to avoid warping the shutter with the lens-concentrated rays of the sun.

No IBIS

With the EOS R, Canon is continuing its long tradition of putting image stabilization into selected lenses, not its cameras. The normally stated logic is sound – better tailor an I.S. system for the specific demands of a particular lens than go with a ‘one size fits all’ in-body system which inevitably adds bulk to the camera.

It’s a fair argument, but Sony’s A7/A9 bodies and Nikon’s new Z6 and Z7 do offer in-body stabilization, it works, and it is very useful for video and stills alike. The new Canon RF 28-70mm F2 for example may turn out to be a great lens, but since it lacks an in-built I.S. element, it’s completely unstabilized on the EOS R. Sure, the R offers digital ‘5-axis’ stabilization in video mode, but it’s no substitute for an optical-mechanical system.

Single UHS-II SD card slot

And if there’s one thing we learned from recent reaction to the Nikon Z7 it’s that only one card slot means EVERYTHING IS TERRIBLE AND WE’RE ALL GOING TO DIEEEEEEEEEEE!

If you, or anyone you know has been affected by the inclusion of a single card slot in a digital camera, we want to hear from you. Asking for help is the first step.

Viewfinder and rear screen

The EOS R’s viewfinder is built around an OLED panel with a resolution equivalent to 3.69 million-dots, and a magnification of approximately 0.76X. Coverage, as we’d expect from a modern EVF, is 100% of the image area. The EOS R’s viewfinder is really nice, offering a comparable (if not quite equal) clarity and perceptual resolution to the excellent (and similarly spec’d) finder in Nikon’s Z7 and Z6. It’s slightly smaller though, compared to the 0.8X finder magnification of the Nikon models.

The EOS R’s LCD is fully articulated, rotating around a hinge on the left-hand side of the camera’s rear plate

The EOS R’s rear LCD also looks very nice indeed, offering a resolution of 2.1 million dots, with touch sensitivity. In terms of resolution this almost (but not quite) matches the benchmark panels on the back of the Nikon D500/850/D5 and should look crisper than the 1.6 million-dot LCD on the back of the EOS 5D IV. The screen is fully articulated, rotating around a hinge on the left-hand side of the camera’s rear plate. The well-integrated on-sensor PDAF system and sharp, articulating rear LCD make the EOS 6D II great fun to use in live view mode, and the EOS R looks like it will be be similarly enjoyable.

LP-E6N battery

The Canon EOS R uses the same LP-E6-pattern battery that has powered more than ten of the company’s DSLRs, and the (included) ‘N’ variant will support in-camera charging, via the PD-E1 power adapter over USB C. The company recommends only using its own adapter.

The EOS R’s CIPA rating for battery life ranges from 330 to 560 shots per full charge, depending on shooting conditions. For reference, that compares to 850-900 shots from the 5D Mark IV. The lowest rating is derived from mostly viewfinder shooting at 32 degrees F / (zero degrees C), and the highest rating refers to composing images on the rear screen, at room temperature, with ‘Eco mode’ activated. With a boring old LP-E6 (not the newer ‘N’) battery life should be about 5% lower.

Any way you look at it, the EOS R won’t have anything like the endurance of Sony’s a7 III

However you end up shooting with the EOS R, CIPA rated battery life for hybrid mirrorless cameras should be taken with a very large pinch of salt. In a single shooting session, we’ve managed more than 5X the CIPA rated number of exposures from a single charge of the new Nikon Z7’s battery, for example – a camera that has been roundly trashed on our forums by people who have never used it for its poor battery life. That’s not to say that CIPA ratings aren’t useful for comparison – any way you look at it, the EOS R won’t have anything like the endurance of Sony’s a7 III, for example.

Video

The Canon EOS R can of course shoot video as well as stills, at a maximum resolution of 3840 x 2160 pixels (that’s 4K UHD) at 30p. 24p 4K is also available, as well as HD at up to 60p, with a high-speed 120p option available at a reduced resolution of 720p. At its absolute highest quality setting, the EOS R is capable of a maximum bitrate of 480 Mbps, which works out to about 8 minutes of recording on a 32GB card before you’re out of space (and you’ll need it to be a V60-rated card).

The EOS R gains the ability to capture C-Log footage internally

That’s about the same as the EOS 5D Mark IV and compares to a maximum bitrate for internal recording of 100Mbps from the Nikon Z7. We’re not necessarily expecting video from the R to be more than four times better than footage captured on the Z7, and in fact the option to shoot at lower bitrates using the more efficient H.264 (rather than being locked to Motion JPEG, as in the 5D IV) is actually more useful.

The EOS R gains the ability to capture C-Log footage internally (as 8-bit 4:2:0 MP4 files) or stream 10-bit 4:2:2 C-Log over HDMI. This is a positive step.

Video performance

Sadly however, video performance doesn’t appear to live up to these specs: 4K is limited to a maximum of 30 frames per second, and exhibits significant rolling shutter, from what we’ve seen so far. The image above is a still frame from a 4K 30p whip-pan using the EOS 5D IV showing how severe the so-called ‘jello effect’ can be. The EOS R also imposes the same ~1.7x crop that we saw on the 5D IV, essentially reducing it to a sub-APS-C camera in 4K mode.

For a company with such a long history of disrupting the video market, we had hoped for more

Yes, that’s right – the EOS R is unique among current 4K-capable full-frame mirrorless cameras in not offering full-width video capture in its highest resolution video mode. If you’re a stills-focused photographer, this probably won’t bother you, but it’s still disappointing that Canon hasn’t invested more in the video features of the R. For a company with such a long history of disrupting the video market, we had hoped for more. Maybe next time?

On the plus side, though, there’s the highly usable Dual Pixel CMOS AF system which, combined with a full flip-out touchscreen and the ability to use EF-S lenses, means the R could be quite an effective camera for vlogging.

Buttons, dials and panels

In terms of its operational design, the EOS R is a mixture of the old and the new. The venerable top control dial (which dates back more than 30 years to the film-era T90) is still right where it’s always been, on the top of the grip just behind the shutter button, but the traditional EOS rear dial has been relocated to the camera’s top right shoulder. A PowerShot style 4-way controller takes its place to the right of the LCD on the rear of the camera. There is no dedicated AF joystick, and no traditional PASM dial. Instead, exposure modes are cycled via the ‘Mode’ button at the center of the rearmost control dial to the right of the top-plate LCD.

Several functions can be assigned to the touch-sensitive M-Fn bar

To the left of the EOS R’s viewfinder you’ll see an on/off switch cunningly disguised as another control dial (an unwelcome throwback to the original EOS M), and to the right you’ll notice a brand new control point, which Canon is calling the ‘M-Fn bar’. Several functions can be assigned to this touch-sensitive bar, depending on what you want to do, and how you want to interact with it.

You can touch one side or the other, press the entire bar at its center, or swipe from left to right or right to left. In this way, the bar can be used to set a range of functions during shooting, ranging from ISO sensitivity to display info. In playback mode it can be used as a function shortcut or to ‘jump’ between ranges of images in a sequence.

Final thoughts (for now)

So the EOS R isn’t the mirrorless 5D IV that some people were hoping for (except in video mode…), much less the mirrorless EOS-1D X Mark II that others were bravely predicting, but even so, dismissing the R would be a mistake. As a company, Canon remains very conservative in many respects, while being quietly groundbreaking in others. Dual Pixel CMOS AF was always going to be at the heart of any canon full-frame mirrorless camera, for example, and the version that Canon has included in the EOS R appears to be significantly evolved compared to its earliest iterations.

We always knew that Canon would enter the mirrorless full-frame mirrorless market eventually, but not until it was ready – and certainly not in a way that would risk either killing sales of its hugely popular DSLRs or spooking the heavily-invested professionals that make up such an influential and valuable (albeit numerically comparatively small) portion of its customer base.

The original EOS 650, which debuted the EF mount in 1987. In terms of specification, the 650 was a fairly pedestrian camera, but groundbreaking nonetheless. Picture: Szczery, via Wikipedia Commons.

The EOS R is the natural product of that philosophy. In fact, it reminds me a lot of the original EOS 650, Canon’s first EF-mount SLR and a fairly ‘meh’ camera even by the standards of 1987, but one which nonetheless ushered in a sea-change in Canon’s optical and mechanical design. Despite its unassuming specification, the EOS 650 and its subsequent sister models rang the changes for the entire photography industry for many, many years afterwards.

For now, the most interesting thing about the launch of the RF system is the new mount

Canon is very rarely first to market with new technologies – a point made by executives at the EOS R’s official launch. Historically it’s not been so much a matter of when, but how the company enters the market that has proved impactful. The EOS R isn’t a particularly exciting camera – especially for videographers – but as a statement of intent it is highly significant.

For now, the most interesting thing about the launch of the RF system is the new mount, and the co-announced native lenses. Even if you’re not particularly inspired by the R, it’s worth looking back to those early EOS models of yesteryear and pondering what might be coming next. The new 28-70mm f2 looks like it could be one hell of a lens, but Canon probably doesn’t expect it to be bought by EOS R users. It’s more than twice the weight of the R, for one thing. More likely it’s intended to be used by purchasers of a future RF-mount camera, one more geared towards the needs of advanced enthusiasts and professionals.

For now, the EOS R is pretty much what we expected it would be. It’s not the final product of Canon’s mirrorless ambitions, it’s a start.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on The Canon EOS R isn’t a mirrorless 5D IV, but it’s a start

Posted in Uncategorized

 

DPReview TV: First thoughts on the Canon R

05 Sep

Hours after the official launch of the Canon EOS R, Chris and Rishi sat down to chat about the camera and what we know about the system so far. They talk about where the camera falls short of expectations, some initial handling impressions and the promise of this new system.

Read more about the Canon EOS R

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DPReview TV: First thoughts on the Canon R

Posted in Uncategorized

 

Canon 400mm F2.8L IS III and 600mm F4L IS III are lighter than predecessors

05 Sep

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_8118953092″,”galleryId”:”8118953092″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Amid its full-frame mirrorless announcements, Canon has also made room for some L-series lens updates. Canon has focused on reducing weight and so its EF 400mm F2.8L IS III USM and EF 600mm F4L IS III USM both lay claim to the title of “world’s lightest” in their respective focal lengths. The 400mm F2.8 has shed 1kg / 2.2lb and the 600mm F4 is 0.86kg / 1.9lb lighter. Both lenses feature advanced coatings, improved image stabilization and circular nine-blade apertures.

The Canon EF 400mm F2.8L IS III USM will sell for $ 12,000 and the Canon EF 600mm F4L IS III USM is priced at $ 13,000. Both lenses will ship in December 2018.

Press release

Canon Redesigns Premium L-Series Super-Telephoto Lenses With Its New EF 400MM F/2.8L IS III USM AND EF 600MM F/4L IS III USM Lenses

New Compact and Lightweight EF Super-Telephoto Lenses Are Well Suited for a Variety of Photographers’ Needs

MELVILLE, N.Y., September 5, 2018 – Most professional photographers need to carry multiple lenses in their camera bags. Helping to lighten their load, Canon U.S.A. Inc., a leader in digital imaging solutions, introduces two new super-telephoto lenses, the EF 400mm f/2.8L IS III USM and EF 600mm f/4L IS III USM. Both lenses possess a dramatic weight reduction and high-image quality, making it ideal for shooters to easily transport and capture images during action-driven scenarios, such as sports and wildlife. Both lenses now hold the title of world’s lightest in their respective focal length*. The weight of the EF 400mm f/2.8L IS III USM and EF 600mm f/4L IS III USM lenses has been reduced by 2.2 lbs. (more than 25 percent) and 1.9 lbs. (more than 20 percent) respectively.

“When developing updates to some of Canon’s most popular legacy lenses, one common question that is asked by photographers was ‘can they be lighter,’” said Kazuto Ogawa, president and chief operating officer, Canon U.S.A., Inc. “The significant reduction of weight in these two lenses addresses this customer need and delivers thoughtfully designed, high-quality optics .”

The new lenses are must-haves for advanced and professional photographers shooting wildlife, aviation, sports and news with Canon’s new EOS R full-frame mirrorless camera (with use of one of the three new Canon mount adapters), as well the EOS 1D and 5D series of DSLR Cameras. Both lenses feature two of Canon’s most advanced propriety lens technologies – Air Sphere Coating (ASC) and Super Spectra Coating (SSC), helping to reduce flaring and ghosting, and suppressing the reflection of light, leading to vivid images. These updated lenses inherit the excellent overall build-quality and ruggedness photographers have come to expect and admire from the Canon EF L series of lenses. In addition, the minimum focusing distance has been improved for both lenses, from 2.7m to 2.5m (8.8ft to 8.2ft) for the EF 400mm f/2.8L IS III USM and 4.5m to 4.2m (14.8ft to 13.8ft) for the EF 600mm f/4L IS III USM.

Additional noteworthy features of the lenses include:

  • Upgraded Optical Image Stabilization from three-and-a-half stops to five shutter speed stops1 of correction over the previous f/2.8 lens
  • Improved, flexible focus control with a customizable electronic-focus ring
  • Two fluorite lenses and one super UD lens, helping to provide high image quality
  • Circular nine-blade aperture
  • 17 lens elements in 13 groups
  • Heat-shielding paint helps prevent lens temperature from rising during excessive exposure to sun
  • Fluorine coating on front and rear optical elements, helps to reduce smears and fingerprints
  • Inner focusing system with Ring Ultrasonic Motor

Availability and Pricing

The Canon EF 400mm f/2.8L IS III USM is scheduled to begin shipping in December 2018 with an estimated retail price of $ 11,999. The Canon EF 600mm f/4L IS III USM is scheduled to begin shipping in December 2018 for an estimated retail price of $ 12,999^. For additional information regarding the lenses predecessors please visit, visit usa.canon.com.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon 400mm F2.8L IS III and 600mm F4L IS III are lighter than predecessors

Posted in Uncategorized

 

Three EF-to-RF adapters available for EOS R

05 Sep

Alongside the new RF lens mount, Canon has announced a trio of RF-to-EF adapters for owners of current Canon DSLR lenses. There’s a basic adapter, another with a customizable control wheel and a third with support for drop-in filters. The Mount Adapter EF-EOS R, Control Ring Mount Adapter EF-EOS R and Drop-in Filter Mount Adapter EF-EOS R are compatible with both EF and EF-S lenses.

Refresh this page for updates

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Three EF-to-RF adapters available for EOS R

Posted in Uncategorized

 

Olloclip announces Multi-Device Clip for smartphone lenses

05 Sep

Olloclip has built a reputation as one of the most successful manufacturers of smartphone accessory lenses. However, so far most Olloclip lenses have had one important limitation: they were device-specific. If you had more than one smartphone you could not use the lenses with all your devices, or if you upgraded to a new handset you usually needed to get new lens clips and/or lenses.

This is now a thing of the past, however. Today Olloclip has announced its new Multi-Device Clip. The clip is designed to work with the company’s Connect X line of interchangeable lenses, which includes several wide-angle options, macro lenses, a telephoto and a fisheye, and works with most smartphones.

The Multi-Device-Clip can expand to fit devices of up to 12mm thickness, meaning it is compatible with screen protectors and you can usually leave your case on as well, when snapping an image with your Olloclip lenses.

Olloclip’s new Multi-Device Clip will be available with any of the Connect X lenses mid-September starting at $ 60. You can sign up for more information on the upcoming release on the Olloclip website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Olloclip announces Multi-Device Clip for smartphone lenses

Posted in Uncategorized

 

Red releases Hydrogen One product photos, confirms release date

05 Sep

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_9479085581″,”galleryId”:”9479085581″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

When it was first announced in July 2017 the RED Hydrogen One super-phone created quite the splash, thanks to a Leica-made 5.7″ lightfield holographic display and a pin-based expansion system that allows for attaching a range of hardware modules. The system is similar to Motorola’s Moto Mods, but probably more focused toward high-end video given the brand we’re dealing with.

Since then delivery has been pushed back several times, most recently because the company needed some extra time to receive carrier certification. However, now we have a fixed release date: November 2nd. Pre-orders will ship on October 9th.

The Hydrogen One aluminum version will be available through AT&T, Verizon and Telcel
for $ 1295

Additionally, Red founder Jim Stannard has shared several actual product photos on the Hydrogen product forum that allow for a good look at the device’s large dual-camera module. The Hydrogen One also comes with a rugged-looking design that features a lot of carbon fiber, giving the phone a pretty unique appearance.

The price tag will unfortunately be unique as well. The Hydrogen One aluminum version will be available through AT&T, Verizon and Telcel for $ 1295. The titanium variant will be out in 2019 and set you back an additional $ 200.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Red releases Hydrogen One product photos, confirms release date

Posted in Uncategorized