Category: Uncategorized

  • Sony reportedly cuts planned mirrorless camera features to free up hardware for PS5

    Sources recently speaking to Bloomberg allege that Sony has nixed some features it had planned for an unnamed future mirrorless camera model due to the scarcity of certain hardware, namely DRAM and NAND flash memory. The decision was reportedly made in order to reserve the limited hardware for the upcoming fifth-generation PlayStation console, which is expected to launch this holiday season.

    The current demand for NAND and DRAM is high among smartphone manufacturers, according to Bloomberg, which reports that Sony is struggling to keep down the cost of its upcoming PS5 console. Assuming sources are correct, the PS5 will cost around $ 450 to manufacture, meaning that even with thin margins, consumers could be facing a unit price of $ 470 or more for the next-gen gaming console.

    The sources claim that the coronavirus outbreak hasn’t had any sort of impact on the PS5 at this time, but that limited DRAM availability prompted the company to cancel some mirrorless camera features it had planned. Sony will reportedly prioritize the DRAM for its PS5 console, the final price of which hasn’t been revealed.

    The report doesn’t specify which camera model will suffer as a result of this alleged decision nor which features were eliminated, though it does claim that Sony plans to release the camera this year. Assuming the claim is true, Sony may have decided to remove a planned stacked DRAM image sensor from an upcoming model, but the company has not commented on the report, leaving little more than speculation at this time.

    Articles: Digital Photography Review (dpreview.com)

  • Cosina announces new Voigtlander Nokton 60mm F0.95 lens for Micro Four Thirds cameras

    Cosina Japan has lifted the veil on its latest lens for Micro Four Thirds camera systems, the Voigtlander Nokton 60mm F0.95.

    The manual focus lens, which is set for an April 2020 release in the Japan market for ¥145,000, is constructed of 11 elements in 8 groups, features an aperture range of F.095 through F16 and features a ten-blade aperture diaphragm. The minimum focusing distance is 34cm (13.4in) and it features a 77mm front filter thread.

    Below are a few low-res sample images provided by Cosina:

    $ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_6140503892″,”galleryId”:”6140503892″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

    Cosina has also added a new aperture switching mechanism that will de-click the aperture ring for times when you don’t want the tactile and auditory feedback. The lens measures in at 82.5mm (3.25in) diameter and 87.7mm (3.45in) long, and weighs in at 860g (1.9lbs).

    No pricing or availability information has been given for regions outside of Japan.

    Articles: Digital Photography Review (dpreview.com)

  • Fujifilm X-T200 pre-production sample gallery

    $ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_1616277038″,”galleryId”:”1616277038″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

    Fujifilm knows how to make a great enthusiast camera, but it hasn’t always gotten the entry-level quite right. Enter the X-T200: a beginner-friendly feature set that improves on its predecessor’s specifications in significant ways. We’ve been out shooting with a pre-production model both close to home and in a galaxy far, far away.

    Articles: Digital Photography Review (dpreview.com)

  • PolarPro releases ‘LiteChaser Pro,’ a mobile filter system for the iPhone 11

    PolarPro has released LiteChaser Pro, a mobile filter system for Apple’s latest iPhone devices. The kits, designed for compatibility with the iPhone 11, 11 Pro, and 11 Pro Max, offer a range of products that includes a line of neutralizing and polarizing filters, a filter and grip.

    ‘Since the launch of Apple’s iPhone 11 in September 2019, the goal was to develop a
    complete creative system worthy of replacing your DSLR/Mirrorless camera and help
    transform your iPhone 11 into the ‘A’ camera. Whether vlogging your travels or even
    producing your own short film; and PolarPro met that goal with the introduction of the
    LiteChaser Pro system,’ said Jeff Overall, Founder and CEO of, PolarPro ‘In the end,
    the outcome is a complete creative system built specifically for mobile filmmakers and
    photographers to deliver shots never before possible on iPhone.’

    These are the filters created for the LightChaser Pro system:

    ND8 (3-Stop) & ND64 (6-Stop)

    These filters were designed to ensure you have the correct shutter speed to achieve more
    cinematic looking footage.

    Variable (3-5 stop)

    This aluminum-framed variable neutral density filter is engineered specifically for mobile
    filmmakers to lower shutter speeds to cinematic levels. Laser-etched stop indicators inform you of how much light you are reducing within the preset 3-5 range. The controlled stop range reduces cross-polarization on the two longer lenses.

    Circular Polarizer

    This filter helps capture deeper colors and reduce glare, reflections, and haze from your photos. Rotatable so you can control its effect based on your composition.

    The LiteChaser Pro Case is made of rubber, has a reinforced frame, and an aluminum filter mount that is compatible with the range of circular, variable, and neutral density filters listed above. The Grip includes two 1?4”-20 thread mounts for a mobile tripod mount with features that allow you to add a light or mic. A rail system includes two 1?4”-20 thread mounts for a mobile tripod mount with features that allow you to add a light or mic. The rail system also adjusts to hand sizes and allows switches between landscape and portrait modes.

    Launch pricing for kits is available for a limited time.

    Kits
    Photography Kit (Case, Grip, CP) Reg. – $ 119.99 | Launch – $ 99
    Filmmaker Kit (Case, Grip, VND) Reg. – $ 149.99 | Launch – $ 119
    Essential Kit (Case, Grip) Reg. – $ 69.99 | Launch $ 59
    Filters
    Circular Polarizer – $ 49.99
    Variable ND 3-5 Stop – $ 89.99
    Pre-orders are open now and shipping begins on March 28th.

    Articles: Digital Photography Review (dpreview.com)

  • Fujifilm warns its customers to avoid sending undeveloped film through new airport scanners

    Fujifilm has joined Kodak Alaris in warning its customers to avoid sending film through new scanners being deployed by the TSA in many airports throughout the United States. The advisory is brief and simply states, ‘Those machines may [be] more damaging to unprocessed film and Instax film than previous generations of scanners.’

    The solution is simple: photographers are encouraged to pack their film products in a carry-on bag and to request a hand inspection of the items.

    This is similar to the warning Kodak Alaris published in late January; the company received clarification from the TSA, which said that its screeners are trained to inspect film by hand. As well, the TSA has put warning signs near X-ray machines that may damage undeveloped film. The film should be packed in a clear plastic bag and removed from the carry-on luggage at the security checkpoint.

    Articles: Digital Photography Review (dpreview.com)

  • Instagram CEO reveals the simple reason the company doesn’t have an iPad app

    Despite the popularity of both the social media platform and the gadget, Instagram still lacks an iPad app. This omission remains frustrating, particularly in light of the iPad Pro and its suitability as a laptop replacement for some photographers. In a recent Instagram story, the company’s CEO Adam Mosseri briefly discussed the topic, stating that Instagram wants to launch an iPad app.

    The information surfaced in one of Mosseri’s Instagram stories; it was spied by The Verge editor Chris Welch who tweeted the details to his followers.

    In addition to revealing that some Instagram users don’t see advertisements, Mosseri reportedly also said in the story that Instagram ‘would like to build an iPad app,’ but that ‘we only have so many people, and lots to do, and it hasn’t bubbled up as the next best thing to do yet.’

    This, of course, has raised questions over whether an iPad app will ever be ‘the next best thing’ on Instagram’s list of priorities. The iPad’s 10th anniversary is in less than two months and device owners have been requesting a proper iPad app for years.

    Articles: Digital Photography Review (dpreview.com)

  • Nikon releases major firmware updates for its Z6 and Z7 cameras, minor update for the Z50

    Nikon has released a trio of firmware updates for its Z6, Z7 and Z50 mirrorless cameras. Aside from the Z50, the Z6 and Z7 updates bring a number of major new and improved features, including expanded CFexpress, animal-detection autofocus (AF) and more.

    Firmware version 3.00 for both the Nikon Z6 and Z7 are identical across the board in the new features and functionality they bring to the camera systems. First, Nikon has added support for ProGrade and Lexar CFexpress (Type B) memory cards. Nikon has also added a new animal-detection AF, meaning the Z6 and Z7 ‘can now detect and focus on the faces and eyes of dogs and cats,’ even in movie capture mode.

    Subject-tracking AF has also been improved, with the ability to activate it using the Fn1 or Fn2 buttons on the camera body or barrel of the lens when using compatible Z-mount lenses. Nikon has also changed the behavior of the camera when subject-tracking AF to make it more resemble the experience of shooting with Nikon’s signature 3D-tracking options found on Nikon’s DSLRs. In Nikon’s own words:

    ‘Subject tracking for still shooting in AF-C mode has been modified to provide a more familiar operational feel similar to that of 3D-tracking feature built into Nikon DSLR cameras. To enable the feature, users can hold the AF-ON button or half-press the shutter-release button to initiate. Subject tracking disengages when users take their finger off the button, causing the camera to switch back to the original focus point before subject tracking began. Additionally, the transition from the Auto-area AF display to the subject selection display can be assigned to a custom control button, allowing for a more customized user-experience.’

    Other changes include a new custom settings, support for the focus limit switch on select Z-mount lenses (only the Nikkor Z 70–200mm F2.8 VR S offers it at this time), and improved responsiveness when switching to manual focus ‘when the focus or control ring on a Z mount lens is rotated during autofocus.’ Fixes have also been made for viewfinder brightness issues, Bluetooth connection issues on iOS and a rare phenomenon wherein horizontal lines could appear across photographs captured with the device.

    Moving onto firmware version 1.10 for the Z50 mirrorless camera, Nikon has added the same focus limit switch option as it did on the Z6 and Z7, and movies shot in self-portrait mode are now filmed using full-time autofocus (AF-F), regardless of what option is selected for the current autofocus mode.

    You can download the latest firmware updates for the Z6, Z7 and Z50 on Nikon’s website.

    Articles: Digital Photography Review (dpreview.com)

  • Panasonic interview: ‘If we stay united I think we will survive’

    Yosuke Yamane, Director of Panasonic’s Imaging Business Division, pictured at the Consumer Electronics Show in Las Vegas, in January.

    At last month’s Consumer Electronics Show in Las Vegas we sat down with Yosuke Yamane, Director of Panasonic’s Imaging Business Division, to discuss market reaction to the S1-series, full-frame strategy and the state of the L-mount alliance.


    How have the S1 and S1R performed in the market?

    It fluctuates month by month, but in the $ 3,000 / €3,000 price range, we have gained roughly a 10% market share, globally. That was the result we were hoping for.

    With the S1 and especially the S1R we were targeting high-end customers in the full-frame market. Over the past eight months we’ve been able to penetrate that market and we are satisfied with the sales, so far.

    We’ve had great reviews from magazines and websites, and we just won the Gold Award at the prestigious Camera Grand Prix, in Japan. Only one camera can be selected as best camera in a year, and we got the number one award. We’ve been in the industry for twenty years and this is the first time we won the Grand Prix award, so we’re very satisfied.

    What kind of differences are you seeing between the kinds of people buying the S1 versus the S1R?

    With the S1R, we were targeting high end stills photographers, whereas with the S1 we were targeting both video and stills customers. So-called ‘hybrid’ photographers. And the customers who are purchasing the S1R are mostly stills photographers, whereas S1 customers are shooting both video and stills.

    These days a lot of professional photographers are stepping into the videography area, and we want to support those photographers with the S1.

    Do you have any idea of how many S1 purchasers have paid for the SFU2 video firmware upgrade?

    The S1 outsells the S1R, and roughly speaking, probably 20-30% of S1 customers are purchasing the SFU2 for the upgraded video customers.

    The Panasonic Lumix S1 is a 24MP full-frame camera aimed at enthusiast photographers and videographers. Unsurprisingly, it has out-sold the more expensive S1R, but it’s interesting to learn that up to a third of buyers have paid for the SFU2 upgrade, which adds video features.

    What kind of people are buying the S1H?

    Videographers and cinematographers, as we expected.

    Panasonic already has a range of high-end dedicated video cameras – what specific need was the S1H designed to meet?

    These days, more and more filming is done using drones and gimbals. The S1H is designed to be more flexible for those [kinds of] unique requirements.

    Where do you see the biggest opportunities for Panasonic, in the next few years?

    We believe that our video features are one or two steps ahead of our competitors, and we have an advantage there. For example, with the S1H which we released a few months ago, the sales performance is exceeding our original expectations. But the video performance of the S1H was designed to meet the needs of high-end videographers and cinematographers, so for amateur or hobby videographers, the S1H may be over-specced.

    Our video features are one or two steps ahead of our competitors

    We believe that what the market is telling us is that in the near future, all those video features should be available from high-end to enthusiast-level videographers. That’s the demand that we need to meet.

    Do you see more long-term opportunity in the full-frame market, compared to Micro Four Thirds?

    One advantage of Micro Four Thirds is the deep depth of field. Which is also good for video. With that unique feature, we want to support both stills and video photographers. Whereas big sensor cameras have a shallower depth of field, which suits different requirements. Those two categories [of needs] are different, and we satisfy both.

    We want to target different customers, and we will keep developing cameras for both categories – full-frame and Micro Four Thirds.

    The S-system consists of some very high-quality cameras and lenses, but the current lineup includes some seriously chunky products – especially lenses. According to Mr Yamane, customers are asking for smaller products.

    The fact is that the full-frame camera market in the US is expanding rapidly. But as you know, full-frame sensors are 4X bigger than Four Thirds, which means that the lenses also need to be big. Which means that [our] full-frame camera system, even though it’s mirrorless, is bigger than Micro Four Thirds. We believe that the two categories can co-exist. That’s why we keep pursuing both [product lines].

    Some manufacturers, as you know, are making very small lenses, compatible with full-frame, but we think that to do this, they needed to sacrifice lens quality to a certain extent. That’s how they are able to make them so small. That means that those lenses are not fully utilizing the benefits of the full-frame sensor. When it comes to Micro Four Thirds, we can fully utilize the benefits of the sensor, and we believe that as a combination, the overall quality of Micro Four Thirds can be very good.

    Which countries generates the biggest sales of full-frame, and Micro Four Thirds products respectively?

    There’s not much difference, country by country, in terms of percentage of sales.

    Panasonic now supports two interchangeable lens systems – Micro Four Thirds and L-mount – but they’re not directly cross-compatible. You’ve told me before that Panasonic will not create an APS-C lineup – is that still the case?

    As of now, we have no plans to enter the APS-C market, because we know that Micro Four Thirds and full-frame can coexist without any cannibalization.

    Promoting the L-mount alliance is very important for us because it gives our customers confidence in the [mount] over the coming years

    If we moved into APS-C, there might be some overlap between Micro Four Thirds and APS-C, and between APS-C and full-frame, so I don’t think we’ll go in that direction.

    What is your strategy to attract entry-level photographers to full-frame?

    As you know, we have an alliance with Leica and Sigma. Between the three manufacturers, there are 47 lenses available. We think that with this combination of different cameras from the three manufacturers, and lenses, from the high-end to the mid-class, we are starting to satisfy entry-level to enthusiast users.

    So you don’t mind if an entry-level customer comes into the L-mount via a Sigma or Leica camera?

    Initially, we really wanted to appeal to high-end users, to show that we could make those high-end cameras. To prove the quality of our cameras. In the future, we’re going to introduce mid-class, and different ranges of cameras.

    But those future cameras will still be full-frame?

    Yes. Two different [L-mount systems] would be too much for us!

    What are the most important priorities for evolving the S1 lineup, in the future?

    Overall, we’ve had a lot of appreciative comments from high-end users. What’s hindering us in the lower-end segment is size, weight and price. So we need to understand those obstacles, and we’re considering the development of new products in order to penetrate into a wider market.

    The S1 (left) has a sensor 4X larger than the GH5S (right). According to Mr Yamane, if the company expanded its lineup of L-mount cameras to include APS-C models, this might risk cannibalizing sales of its Micro Four Thirds bodies.

    How has your relationship with Sigma and Leica evolved over the course of your alliance?

    We meet periodically to [maintain] our relationship, and right now we’re discussing how to expand the L-mount system. We need some new ideas to expand the system to a wider variety of customers. We cannot disclose details, but [at the moment] we’re discussing changes to the communication protocol between the cameras and lenses.

    The number of members of the L-mount alliance may increase in the future

    Promoting the L-mount alliance is very important for us because it gives our customers confidence in the [mount] over the coming years. So for example, we’ll have joint booth areas at tradeshows, and maybe in stores we’ll have touch and try opportunities for consumers to try the products from all of the alliance members.

    What has been the most important or valuable aspect of your collaboration with Sigma and Leica?

    With Leica and Sigma, we [hope to be] offering L-mount cameras forever. If you purchase a camera from another brand, you have to rely [solely] on that brand. But we are three, and because of that we can give our users the assurance that the L-mount alliance is not going to disappear.

    Is there a risk that some of your competitors might disappear?

    It may be hard for some manufacturers to survive in this difficult industry, but we are a combined team, and if we stay united I think we will survive. Please understand that this is purely hypothetical, but the number of members of the L-mount alliance may increase in the future.

    Is this something that has been discussed?

    There are no concrete ideas, but we wouldn’t pass up such an opportunity.

    Late last year, Panasonic teased an 8K camera, and hinted that this technology might make it into the Lumix line. That may yet happen, but according to Mr Yamane, it won’t be for a while.

    Can you share any more details of the 8K camera that was talked about at IBC? There was a hint that this technology might start being included in Lumix cameras after the 2020 Olympics.

    At this time, the only 8K camera we have planned is for the Olympic games, which is only a few months away. Our feeling is that the 8K era is a little bit delayed. But we want to catch that opportunity and we haven’t given up our pursuit of 8K cameras.

    So there are no immediate plans to introduce 8K capture into the Lumix line?

    We will be ready for 8K soon, but we can’t tell you the timing. We need a little bit longer before we can introduce 8K cameras. It won’t be [in the very near future].


    Editor’s note: Barnaby Britton

    I enjoy speaking to Mr. Yamane, whenever I get the opportunity. Like Mr. Yamaki of Sigma (the two are friends) he is reliably candid, and has a firm grasp of the many challenges and opportunities facing Panasonic. No executive can be expected to reveal concrete plans for future products or projects, but Mr. Yamane’s hints at more (and smaller) S-series products, and possible changes to the L-mount data protocol are intriguing.

    Also intriguing (but understandably couched in purely hypothetical terms) was Mr. Yamane’s comment that the L-mount alliance might expand, to incorporate more than three members. With so much of the full-frame market still in the hands of just three manufacturers (Canon, Nikon and Sony) it’s interesting to imagine other players joining up to the L-mount, but hard to imagine who they might be.

    Olympus has said (repeatedly, and recently) that it has no interest in full-frame, which really only leaves Fujifilm and Ricoh. I very much doubt that Fujifilm would see much potential benefit from supporting a third mount, incompatible with either of its existing XF and GF systems, and with potential overlap, but Ricoh? You never know.

    Mr. Yamane’s claim of a 10% share of the €3,000+ market, globally, counts as strong performance

    Away from hypotheticals, the S1 and S1R have been on the market for a while now: long enough for Panasonic to get an idea of how they’ve been received. Anecdotally, neither model seems to be selling in huge numbers (at least not in the US or UK: the two territories in which I’ve recently had the opportunity to speak to staff in specialist camera stores) but Mr. Yamane’s claim of a 10% share of the €3,000+ market, globally, counts as strong performance from a new line.

    Of those sales, it seems that the S1 has the larger share. This is unsurprising since a) it’s cheaper, and b) it’s more versatile, with a deeper video feature set. Interestingly, up to a third of S1 buyers have opted to pay for a firmware upgrade which upgrades the camera’s video features even further. Meanwhile, the S1H is (no surprise) attracting the attention of dedicated filmmakers.

    Panasonic knows how to make great video cameras, and the videography market is clearly of key importance to the company. What’s most encouraging from talking to Mr. Yamane is that he believes great video should be available throughout his company’s product lineup – not simply in the flagship products.

    And 8K? Well, it looks like we’ll have to wait a little longer for that.

    Click here to read more in-depth interviews

    Articles: Digital Photography Review (dpreview.com)

  • US Judge rules against county seeking to ban drone flights in their parks

    The Michigan Coalition of Drone Operators celebrates their victory outside of the Genesee County courthouse.

    On February 10th, the Honorable Judge Joseph Farah handed down a ruling in favor of the Michigan Coalition of Drone Operators (MCDO) after Genesee County, in Flint, tried to establish an ordinance banning drones in their parks. The three-month-long legal battle was ignited after R. Jason Harrison was arrested in December 2018 for flying legally in a park. Harrison’s drone and accessories were confiscated and he was issued a misdemeanor.

    Even though the ticket was dropped, Harrison sought the counsel of Dean Greenblatt, an aviation attorney licensed in both Michigan and Florida. Greenblatt had the following to say to DPReview regarding the situation:

    ‘I understand that this case is the first to attempt enforcement of statewide preemption statutes regarding drones. It is the first legal challenge in Michigan, and presumably the first legal challenge to a preemption statute anywhere in the country.’

    What happened to Harrison isn’t unusual for remote pilots operating in a majority of states across the US. 33 of them don’t have the proper State Legislation in place. This allows local governments to establish their own laws regarding drone use. Even though the Federal Aviation Administration (FAA) has jurisdiction over national airspace, local municipalities in these 33 states can override the government agency by passing rules that regulate the land. Many public parks in California, for example, prohibit people from launching an unmanned aerial vehicle on their premises. This creates hassles for commercial drone operators and confusion for casual users less familiar with local ordinances.

    Even though the Federal Aviation Administration (FAA) has jurisdiction over national airspace, local municipalities in these 33 states can override the government agency by passing rules that regulate the land.

    There isn’t a central database or uniform resource dedicated to city-specific rules surrounding drone use. It’s not uncommon for someone to check in with an airspace application like Kittyhawk, AirMap, or UASidekick and believe they’re conducting a legal flight….only to be approached by a local law enforcement officer and told to land immediately. Conducting a Google search with the name of the city you plan to fly in along with the terms “drone” or “UAV” is necessary to find out if they have any UAS laws in place.

    Michigan is one of the 17 states with a law that specifically prohibits local governments from creating or enforcing their own drone ordinance. MCL 259.305, which is part of Act 436 passed in 2016, specifically states the following about drone use: ‘[e]xcept as expressly authorized by statute, a political subdivision shall not enact or enforce an ordinance or resolution that regulates the ownership or operation of unmanned aircraft or otherwise engage in the regulation of the ownership or operation of unmanned aircraft.’

    Genesee County argued that it was exempt from state law and amended its park rules in response to the charges brought against them by the MCDO. Newly-created legislation, to justify their ban of drones, stated the following:

    ‘Section P910615-Aircraft and Drones

    No person shall, upon the property administered by the Commission: Make any ascent or descent, operate or possess any balloon, airplane, parachute, drone, manned or unmanned aircraft on Commission properties or waters, except in designated areas, without first obtaining written permission from the Commission or except as may be necessary in the event of an emergency.’

    Judge Joseph Farah signed off on his ruling against the illegal banning of drones in Michigan state parks.

    After a series of hearings that took place in October and November, Judge Farah ruled that the state of Michigan’s legislature was clear, binding, and could not be overridden by local lawmakers. Another person who would agree with this sentiment, and even take it a step further, is the FAA’s former Administrator, Daniel Huerta.

    In a 2017 keynote address for the InterDrone conference, Huerta stated “legally, the (FAA) has regulatory authority over all U.S. airspace. But successfully blending unmanned aircraft into busy airspace will require state, local, and tribal governments to build upon existing federal efforts to develop and enforce safety rules.”

    In a recent development, Genesee County made the decision to override Judge Farah’s ruling and risk being in contempt of court. This stems from their new claim that drone flights within the Class C airspace of KFNT, a ‘no-fly zone’ covering some of the county’s parks, were unlawful. This particular airport participates in the Low Altitude Authorization and Notification Capability (LAANC) making it possible for professionals and hobbyists to fly up to a certain altitude with real-time approval.

    Greenblatt had the following to say about Genesee County’s newfound defiance: ‘any attempt to enforce a drone ban or “no-fly zones” as labeled in the “Amendment” will be met with a motion to hold the County in contempt and to enforce the injunction.’ Inaccurate and incorrect interpretations of airspace rules is the exact issue that led the State Legislature to enact the drone preemption statute; that is, to prevent a patchwork of local regulations by non-experts.

    The MCDO did not seek out any monetary damages from Genesee County. Instead, the group hopes that Judge Farah’s ruling sets a precedent not only for the state of Michigan, but the other 17 states with similar preemption laws should someone find themselves in legal trouble. The final goal is for the remaining 33 states to take up similar legislation to prevent a patchwork of confusing local ordinances and protect the rights of those looking to legally operate drones in national airspace.

    Articles: Digital Photography Review (dpreview.com)

  • Rokinon announces 16mm T2.6 and 35mm T1.5, two new carbon fiber cine lenses

    Rokinon XEEN CF 16mm T2.6

    Rokinon has announced a pair of wide-angle primes that add to Rokinon’s growing lineup of XEEN CF Professional Cine Lenses for Canon EF, PL and Sony E mount camera systems. The 16mm T2.6 and 35mm T1.5 round out Rokinon’s Xeen CF lineup alongside the previously-announced 24mm T1.5, 50mm T1.5 and 85mm T1.5 lenses.

    As with the other three primes in the lineup, the ‘CF’ denotes the carbon fiber used in the construction of the lenses’ barrels for these lenses. The use of carbon fiber reduces the weight of the lenses compared to metal housing, with the 16mm and 35mm primes weighing .9kg (2lbs) and 1.1kg (2.4lbs), respectively.

    Rokinon XEEN CF 35mm T1.5

    Both lenses feature an eleven-blade aperture, a 95mm front filter thread, a 200-degree focus throw and dual-side focus scales made of luminescent material for easier viewing in low-light conditions. They also use Rokinon’s X-Coatings for improved control of internal reflections.

    No pricing or availability information has been shared at this time, but all of the other XEEN CF lenses in Rokinon’s lineup retail for $ 2,495, so it’s not unreasonable to assume these will cost the same. DPReview has contacted Rokinon for more details and will update the article accordingly if we receive a response.


    Update (February 17th, 2020): Updated to clarify the 16mm is a T2.6 lens, not a T1.5 lens, as suggested by the original headline.

    Articles: Digital Photography Review (dpreview.com)