RSS
 

Posts Tagged ‘says’

Canon says ‘first set’ of EOS R5 units shipped out this week, quieting rumors over delays

01 Aug

Over the past few days, there have been numerous reports Canon is delaying shipments of its EOS R5 camera and that retailers weren’t receiving shipments as expected. While Canon Japan did mention there could be delays due to demand earlier this month, these reports suggested several retailers in the UK and throughout Europe weren’t receiving as many cameras as they had expected.

Until today, only Canon Australia had issued a statement on the matter to Newsshooter, saying the ‘speculations are untrue.’ Now, Canon U.S.A. has issued its first statement on the matter, confirming EOS R5 units were shipped from its warehouses this week and on the way to photographers.

In the statement, shared with DPReview through a Canon spokesperson, Canon U.S.A. writes:

‘Orders of the EOS R5 are scheduled to be delivered as initially stated at launch. The first set of cameras shipped from our warehouses this week. We eagerly await the content that will be produced by talented creatives using this camera to be shared with the world.’

Canon U.S.A. specifically mentions the ‘first set of cameras,’ but doesn’t specify the status of the second installment in its statement(according to a few of the rumors, it’s the second installment that could be delayed).

We have contacted Canon U.S.A. in hopes of receiving further confirmation of future shipments and potential delays involved with its EOS R5 and EOS R6 camera systems. We will update the article accordingly if we receive a response.

In regards to future shipments, a Canon U.S.A. spokesperson has told DPReview ‘shipping is as scheduled right now, with no delays.’


Update (July 31, 2020): We updated the article with a statement from a Canon U.S.A. spokesperson regarding future shipments.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon says ‘first set’ of EOS R5 units shipped out this week, quieting rumors over delays

Posted in Uncategorized

 

Nikkei report says Japanese camera manufacturers are in for a ‘shake-up’ following Olympus sale

24 Jul

Nikkei Asian Review Deputy Editor, Masamichi Hoshi, has written an article that outlines a grim picture for the future of the Japanese camera business in the aftermath of Olympus’ recent sale to private equity firm, Japan Industrial Partners (JIP).

The usual suspects are mentioned in Masamichi’s overview: the rise of smartphones and the ongoing COVID-19 pandemic. ‘Japan’s digital camera industry was once considered on par with the country’s auto sector in terms of international competitiveness,’ says Masamichi. ‘But smartphones have driven camera makers to the brink of extinction, and this year the novel coronavirus slammed the already hobbled industry.’

More fundamentally, Masamichi believes the camera industry itself is to blame, as ‘excessive competition’ has created a fast-moving, unsustainable market that will inevitably lead to camera manufacturers paying the ultimate price:

‘Smartphones are not the only reason Japanese camera makers, who had established an oligopoly nearly everywhere around the world, have come to this point. Japanese industry, which has a penchant for competing against its own products, can also blame itself.’

Masamichi references an unsourced quote he says was shared 11 years ago by Hiroshi Hamada, the former Chief Operating Officer of Hoya, who had acquired Pentax around the time of his tenure:

‘Digital camera companies intend to strangle their rivals through excessive competition, but in the end they’ll strangle themselves’

A Canon assembly line Meister (her badge tells us she’s been a Meister for 17 years) works on the front assembly of a telephoto prime lens inside Canon’s Utsunomiya lens factory.

Pricing and shortened product cycles, in particular, are to blame, according to Masamichi. While the near-annual 10% price drops in camera products (roughly a decade ago) and shortened product cycles due to fast-paced technological advancements were beneficial to consumers, Masamichi says it also ‘reduces manufacturers’ investment capacity.’ As a result, the ability to invest in research and development — as well as the ability to stash away savings for dire times — has decreased dramatically. Or, at the very least, started to affect the bottom-line of Japanese camera manufacturers.

Citing Camera and Imaging Products Association (CIPA) figures, Masamichi highlights that 2020 camera sales are on track to be roughly 1/10th what they were back in 2010, when digital camera sales peaked at 121 million units.’

As dire as the numbers are and outlook is, there’s no hope in only dwelling on the negatives of the inevitable. Instead, Masamichi asks ‘where do these iconic brands go from here?’

Lens testing taking place at Panasonic’s Yamagata lens factory.

There is no one-size-fits-all solution, but Masamichi quotes a senior executive at an unnamed investment bank as well as unnamed analysts, who all seem to agree that reform and restructuring is going to be necessary if the Japanese camera industry is to survive:

‘With the market shrinking at such speed, companies are at great risk of falling into a fixed-costs crisis1. Some analysts believe the entire industry will collapse unless companies undertake major reforms, like splitting design and development from manufacturing, and consolidating production.’

The aforementioned investment banker executive specifically said ‘a camera foundry model is one option,’ suggesting the outsourcing of parts and components to third-party factories could help cut manufacturing costs. This method is currently seen in the imaging sensor side of photography, as multiple manufacturers use Sony sensors in their cameras, but further outsourcing of production could help cut overhead even more.

There is likely to be much change ahead; whether it be acquisitions of smaller manufacturers or outright departures from the market, there could be other casualties beyond Olympus. But, if the transition from film to digital taught us anything, it’s that people will keep on taking pictures, and as long as there are photographers out there still in need of a camera and lens, there will be manufacturers vying for their money.


1 Fixed costs in this context are the expenses that companies have incurred throughout the ongoing pandemic, which – as sales have slowed around the world – have not been offset by revenue.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikkei report says Japanese camera manufacturers are in for a ‘shake-up’ following Olympus sale

Posted in Uncategorized

 

Product Advisory: Sony says some of its SD cards are corrupting video files, offers free replacements

16 Jun

Sony has issued a product advisory for select SD cards in three of its SD card lineups, stating video captured with these cards could become corrupted without warning.

The product advisory, posted last Friday, says cards in Sony’s SF-M series, Tough SF-M series and Tough SD-G series are affected by an issue wherein ‘data on [the affected cards] may be damaged or data may not be recorded correction when shooting video on a camera in the video speed class mode.’ No further information is provided on what exactly is causing the problem, but Sony says it’s offering replacement cards through March 31, 2022 for SD cards currently under warranty.

Sony provides the below illustrations to help you deduce whether or not your card is affected by the issue, but you can tell at a quick glance by looking for a little star on the back of left-hand corner of the card — if you have a star, your card isn’t affected.

Sony: ‘To check whether your [SF-M] card is affected, look for a star mark and an alphanumeric on the lower corner on the back of the card. If your card has NO star mark and has an alphanumeric beginning with TV, your card is affected by this issue. (If your card has an alphanumeric beginning with TR, your card is not affected by this issue.)
Sony: ‘To check whether your card is affected, look for a star mark on the lower left corner on the back of the card. If your card has NO star mark, your card is affected by this issue.’

Sony: ‘[Affected SF-M Tough] cards can be identified by the presence of V60, R:277MB/s, and W:150MB/s on the card frontside. To check whether your card is affected, look for a star mark on the lower left corner on the back of the card. If your card has NO star mark, your card is affected by this issue.’

If your card is one of the affected units, Sony requests you call their support line (239–768–7669) or connect with a representative through its online chat support. Sony specifically requests you not contact the retailer you purchased your card from. Dan Carr of Shuttermuse says he’s been through the process and was required to provide the following information when you speak with a representative:

  • SD card model number
  • SD card serial number
  • Date of purchase
  • Place of purchase
  • Shipping and contact information

You can read the full advisory on Sony’s support page.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Product Advisory: Sony says some of its SD cards are corrupting video files, offers free replacements

Posted in Uncategorized

 

Nikon says it’s expecting ‘extraordinary losses,’ has updated its FY2020 projections

12 May

Nikon Corporation has issued a statement to investors warning the company ‘expects to post extraordinary losses’ for its 2020 fiscal year (FY2020) that ended on March 31, 2020, and has subsequently made a revision to the financial forecast ahead of the upcoming release of the results on May 28.

If Canon’s latest financial results were anything to go by, it was inevitable Nikon’s were going to look even worse. While we don’t have the exact numbers yet, Nikon has preemptively warned investors that it won’t be pretty. In a document titled ‘Notice Regarding Recognition of Extraordinary Losses and Reversal of Deferred Tax Assets in Non-Consolidated Financial Statements,’ Nikon says the following:

‘Using the future plan that reflects the impact and more caused by the spread of COVID-19 to business activities, the Company has assessed an indication that fixed assets may be impaired, performed valuation of financial assets, and examined the recoverability of deferred tax assets.’

Put more simply, Nikon is saying the global impact of the COVID-19 pandemic has caused much of its business to slow or stop production in its facilities and dramatically reduced sales, leading to a drop in value of its production line and equipment. In turn for reducing the value of these departments, Nikon will be able to reduce its taxable income equal to the amount it’s decreased the value of these divisions. Nikon specifically references its Imaging Product Business, saying it is posting a 5.7 billion yen impairment loss.

A worker pieces together a custom sensor rig for testing in Nikon’s Sendai factory.

In addition to the above notice, Nikon has also published revisions to its projections for the forthcoming FY2020 results. As you might expect, the numbers are down dramatically.

Nikon expects revenue and operating profits to be 591 billion yen and 6 billion yen, respectively, a decrease of 4.7 percent and 70 percent, respectively, compared to Nikon’s previous forecasts. Nikon notes these figures are amplified due to the ‘recognition of impairment losses of 11.1 billion yen’ mentioned above. Nikon specifically notes the 7.5 billion yen in impairment losses for its Imaging Products Business is ‘mainly for property, plant and equipment and intangible assets.’

Summed up, Nikon is expecting much less revenue from its Imaging Products Business and other divisions due to the ongoing COVID-19 pandemic and as a result, it’s devaluing the assets of those divisions to account for the income said divisions won’t be making in an effort to reduce its tax liability. Put even more simply, Nikon is being clever with its accounting to help cushion the financial blow from what is shaping up to be a rough year.

Just how rough remains to be seen, but we’ll know for certain on May 28, when the full results are released.

Notices:

Notice Regarding Recognition of Extraordinary Losses and Reversal of Deferred Tax Assets in Non-Consolidated Financial Statements

NIKON CORPORATION (hereinafter “the Company”) expects to post extraordinary losses and to reverse a part of deferred tax assets in its non-consolidated financial statements, which are prepared in accordance with Japanese GAAP, for the fiscal year ended March 31, 2020.

Using the future plan that reflects the impact and more caused by the spread of COVID-19 to business activities, the Company has assessed an indication that fixed assets may be impaired, performed valuation of financial assets, and examined the recoverability of deferred tax assets.

As a result, the Company has decided to post an impairment loss of 5.7 billion yen for the fixed assets held by Imaging Product Business. And for Nikon Metrology NV, the Company’s consolidated subsidiary, a loss on valuation of the investments in subsidiaries and affiliates and provision for loss on business of subsidiaries and affiliates will be recognized 6.7 billion yen and 9.2 billion yen, respectively. The Company has also decided to reverse a part of deferred tax assets and post deferred tax expenses of 20.6 billion yen. However, the losses associated with the subsidiary mentioned above will have no impact on the consolidated financial results, as those losses will be eliminated in the consolidated financial statements.

Notice Regarding Revision of the Consolidated Financial Forecast for the Fiscal Year Ended March 31, 2020 and Recognition of Impairment Losses

This is to announce that the consolidated financial forecast announced on February 6, 2020 is revised as below, reflecting our recent business performance trend, and to disclose that impairment losses are expected to be recognized.

1. Revision of the Consolidated Financial Forecast
Revised Consolidated Financial Forecast for the Fiscal Year Ended March 31, 2020 (From April 1, 2019 to March 31, 2020)

2. Reason for Revision of the Consolidated Financial Forecast

Decrease in revenue is expected due to factors such as the delay in installations of FPD lithography system, affected by the spread of COVID-19. In addition, operating profit, profit before income taxes and profit attributable to owners of the parent are also expected to be lower than the previous forecast due to the recognition of impairment losses of 11.1 billion yen for non-current assets, as indicated below in “3. The Recognition of Impairment Losses.”

Based on these situations, the consolidated financial forecast announced on February 6, 2020 is revised as above.

3. Recognition of Impairment Losses

For the fiscal year ended March 31, 2020, indication of impairment for non-current assets was examined based on its future utilization and the impact caused by the spread of COVID-19 on business operations. As a result of measuring the recoverable amount of the cash-generating units in which impairment was indicated, a sufficient recoverable amount was not estimated in the Imaging Products Business and the Industrial Metrology Business and Others. Therefore, impairment losses of 11.1 billion yen are to be recognized. In the Imaging Products Business, impairment losses of 7.5 billion yen mainly for property, plant and equipment and intangible assets are to be recognized. In the Industrial Metrology Business and Others, impairment losses of 3.6 billion yen mainly for goodwill, property, plant and equipment and intangible assets are to be recognized.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikon says it’s expecting ‘extraordinary losses,’ has updated its FY2020 projections

Posted in Uncategorized

 

Canon says firmware fix for lockup issue is coming in ‘early April,’ offers workaround in the meantime

26 Mar

Canon U.S.A has announced a firmware update is being worked on to address the ‘phenomenon’ wherein its EOS-1D X Mark III DSLR camera will lock up under certain conditions.

Previously, we reported on a number of incidents wherein Canon’s latest flagship DSLR would lock up when pressing down the shutter in certain modes. While the exact cause remains unconfirmed, Canon’s changelog for the forthcoming firmware update suggests the bug is caused when the electronic level is turned on in the viewfinder display. Below is the exact text from Canon:

‘The phenomenon may occur when the camera is being used with the electronic level set to “Show” in the viewfinder display. In rare cases, the camera may not perform as it was designed to when operating the AF-ON button or shutter button.’

Note the magnified section, which appears to show a part of the interface used for the OVF level function. This would suggest Canon’s diagnosis of the level feature causing the lockups is accurate for at least one of the original cases we reported on.

Below is a video provided by DPReview reader Hamilton Pytluk, who showed how the bug was affecting shooting. At the time of our initial coverage, it wasn’t known what was causing this issue, but if you look closely (it’s only visible for a few frames), it does appear as though Pytluk had the level showing in the optical viewfinder, which Canon is suggesting is the problem causing the lockups.

Canon says the firmware update will be available in ‘early April,’ but in the meantime, it’s possible to prevent the locking by hiding the ‘Electronic level’ within the ‘Viewfinder display’ sub-menu, as shown in the below menu screenshots provided by Canon. Canon has provided a guide to disabling the viewfinder on its update page.

We will cover the release when the firmware is published, but you can also keep an eye out on the Canon EOS-1D X Mark III product support page.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon says firmware fix for lockup issue is coming in ‘early April,’ offers workaround in the meantime

Posted in Uncategorized

 

Video: Mathieu Stern says LomoMod No.1 is the ‘worst camera’ he’s ever tested

24 Feb

Photographer Mathieu Stern, the creator of the Weird Lens Museum and unique DIY lenses like the ice lens, has published a review of Lomography’s LomoMod No.1 featuring the Liquid Lens. The review is not kind, with Stern stating bluntly that LomoMod No.1 is the ‘worst camera’ he has ever tested.

The LomoMod No.1 is a build-it-yourself medium format cardboard camera that features a unique liquid-filled lens. Photographers can inject their own preferred liquid into the lens, such as tea, in order to create the effects they’re seeking. The DIY nature of the camera makes it seem like it would be a good fit for Stern given his lens projects.

Stern explains that though he likes to create his own lenses, building the LomoMod No.1 was ‘not a fun moment,’ and that the entire process took around two hours because some of the pieces didn’t fit properly. Among other issues, Stern shows in the video that his cardboard camera’s back wouldn’t close properly.

He had more luck assembling a second camera kit but encountered other issues. In addition to producing poor image quality, the film advance wheel — which is made of cardboard — broke, leaving him unable to use the device. ‘I was really p*ssed for spending two hours building a camera and only [getting] 10 minutes [to use] it,’ Stern explains in the video.

The reviewer was able to replace the broken wheel with the wheel from the first camera kit, but it, too, broke in a short period of time. Ultimately, Stern explains that while he liked some of the images shot with the liquid lens, the camera itself was ‘one of the worst things I [have] ever used.’

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Video: Mathieu Stern says LomoMod No.1 is the ‘worst camera’ he’s ever tested

Posted in Uncategorized

 

‘Back to the drawing board’: Sigma says full-frame Foveon camera won’t arrive this year

09 Feb
Sigma CEO Mr. Yamaki, pictured in the company’s factory in Aizu, Japan.

Development of Sigma’s full-frame Foveon camera has met considerable setbacks and the camera is no longer slated to arrive this year. In a letter to customers, CEO Kazuto Yamaki apologizes for the delay and says the decision comes after ‘careful and rigorous testing.’ No new release date is given at this time, and Mr. Yamaki says that the company has decided to start over with a ‘clean slate.’

The full-frame Foveon project was first announced to the public at CP+ in 2018. At the following year’s CP+, Sigma released more details about the camera and said it would reach market in 2020. Mr. Yamaki discussed with us some of the challenges of taking Foveon full-frame, describing the difficulty of improving interconnected aspects of sensor performance like high ISO performance and color gradation.

Press release:

Development status of the full-frame Foveon sensor camera

Dear Customers,

Thank you for being a valued customer.

At Photokina in September 2018, SIGMA announced the development of an L-mount mirrorless camera equipped with a full-frame Foveon sensor. Then, at CP+2019, we shared our plan to release the camera in 2020 and have worked diligently on the development to meet our commitment.

As a result of careful and rigorous testing based on the latest development information, however, it has become clear that the launch of such a camera would be infeasible within this year. Still at this point, we cannot say for certain when the full-frame Foveon X3 sensor will be put into mass production.

In light of current development progress, we are not in a position to offer any specific release plan at present. We have therefore decided that we should start over the project with a clean slate, putting the production plan for this new camera back to the drawing board and going back to the development of sensor technologies.

Since the earlier announcements, your excitement with the launch of a “full-frame Foveon” has been a tremendous source of inspiration and encouragement for us. Everyone involved in the project has pulled out all the stops to make it a reality. I would like to express my deepest apologies for failing to meet your expectations and having to share this disappointing news.

I would like to emphasize that Foveon sensors are in a class of their own and that they are part of the identity of SIGMA cameras that embodies our ideals and philosophies. We are determined to continue dedicating ourselves to technology development to bring better image sensors to life.

I would like to once again express my sincerest gratitude to our valued customers for the strong support you have offered to us. On behalf of all SIGMA employees, I commit myself to you that we continue striving to live up to your expectation and prove that we are worthy of your trust.

I truly appreciate your patience and understanding.

Warmest regards,

Kazuto Yamaki
Chief Executive Officer
SIGMA Corporation

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on ‘Back to the drawing board’: Sigma says full-frame Foveon camera won’t arrive this year

Posted in Uncategorized

 

Fujifilm says new 400MP ‘pixel shift’ mode is coming to its GFX 100 camera system

07 Feb

At its 2020 X Summit in London earlier this week, Fujifilm announced it’s working on adding a 400 Megapixel ‘pixel shift’ mode for its GFX 100 medium format mirrorless camera system.

The impending feature was teased as Fujifilm engineers talked about adding new functionality to its GFX 100 (around the 39:30 mark in the above video). According to the engineers, the ultra-resolution mode would use ‘sub-?m order control’ pixel pitch to create 400MP stills from the 100MP sensor inside its GFX100. Specifically, the engineers noted the new technology would be able to control pixel shift with 10x more precision than is currently available using the in-body image stabilization.

Aside from the aforementioned details, no other information was given, as Fujifilm engineers progressed through the 2020 X Summit. So, until Fujifilm reveals more information, it’s just a matter of waiting to see how long it is until the new functionality finds its way to the company’s 100MP medium format mirrorless camera.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm says new 400MP ‘pixel shift’ mode is coming to its GFX 100 camera system

Posted in Uncategorized

 

Xiaomi VP says under-display front camera tech is not ready yet

30 Jan

Over the last year or so we have seen some smartphone manufacturers, including Xiaomi and Oppo, experimenting with under-display front cameras. The technology could allow for the design of displays without a ‘notch’ or front camera ‘punch hole’ but also means that incoming light has to first travel through the display before it hits the camera lens.

The latter is a major challenges to overcome and a reason why, according to Xiaomi VP Lu Weibing, we should not expect the technology to arrive any time soon in a production device.

Currently the pixel-dense displays of modern smartphones block too much of the incoming light. Combined with the small image sensors deployed in most front cameras this means the imaging module’s light gathering capabilities are much more limited than on a more conventional camera, resulting in sub-par image quality.

Researchers and engineers are looking to develop technologies that allow for a combination of high pixel density and good light transmittance but are not quite there yet. Until the problem is solved there probably aren’t too many consumers willing to sacrifice front camera image quality for a more streamlined device design which is we’ll likely have to wait a little longer for the technology to make it into mass production.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Xiaomi VP says under-display front camera tech is not ready yet

Posted in Uncategorized

 

Instagram CEO says it will start testing hidden ‘likes’ in the US starting this week

10 Nov

After testing it in numerous other regions, including Brazil, Japan, Canada and Australia, Instagram has confirmed it will start hiding ‘likes’ for accounts based in the United States this coming week.

The confirmation comes from Instagram CEO Adam Mosseri during the below interview at WIRED25. In it, he says certain users in the United States will have ‘private likes’ as soon as this week. Based on how Mosseri addresses the crowd, it appears as though the rollout will be random.

While elaborating on why Instagram is looking to test this, Mosseri said:

It’s about young people. The idea is to try and depressurize Instagram [to] make it less of a competition [and] giving people more space to focus on connecting with people that they love [and] the things that inspire them.

It very much seems as though this is a work in progress, far from being set in stone, so initial feedback will likely play a major role in whether or not this feature — or mores the lack of a feature — sticks around.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Instagram CEO says it will start testing hidden ‘likes’ in the US starting this week

Posted in Uncategorized