RSS
 

Posts Tagged ‘Firmware’

Tamron firmware update adds support for Nikon’s FTZ adapter to three of its lenses

05 Sep

Tamron has released firmware updates for three of its F mount lenses to add support for Nikon’s FTZ adapter.

Back in November 2018, Tamron announced firmware updates (1, 2) for half a dozen lenses that added support for Nikon’s F to Z mount adapter. Now, three additional lenses gain support: the Tamron SP 85mm F/1.8 Di VC USD (Model F016), 70-210mm F/4 Di VC USD (Model A034) and 100-400mm F/4.5-6.3 Di VC USD (Model A035).

No additional changes are mentioned in the firmware update, but regardless of whether or not you have a Nikon Z6 or Z7 camera, it’s probably in your best interest to download and install the firmware updates via Tamron’s TAP-in Utility, which works with the Tamron TAP-in console to update compatible Tamron lenses.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Tamron firmware update adds support for Nikon’s FTZ adapter to three of its lenses

Posted in Uncategorized

 

DPReview TV: Panasonic S1 V-Log firmware update

11 Aug

Thanks to an optional firmware update, the Panasonic S1 now offers advanced video features historically reserved for the company’s GH series of cameras. Does this make the S1 the best full frame camera for video on the market? The boys in Calgary have been putting it to the test and have the answers.

Editor’s note: Instead of a sample gallery, we’re providing several ungraded clips from the S1, captured in V-Log, for download so that you can try grading it yourself. (See the links below the chapter markers.) If you have difficulty playing the clips try using the VLC media player.

Get new episodes of DPReview TV every week by subscribing to our YouTube channel!

  • Introduction
  • Installation process
  • Recording formats
  • V-Log vs. V-Log L
  • V-Log view assist
  • Waveforms
  • Missing features
  • Wrap-up

Panasonic S1 V-Log sample download links

  • Close-up with skin tones
  • High contrast landscape
  • High contrast sky
  • High contrast with skin tones

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DPReview TV: Panasonic S1 V-Log firmware update

Posted in Uncategorized

 

Firmware update for Panasonic S1/S1R improves image stabilization and AF performance

01 Jul

Panasonic is releasing a firmware update for its Lumix DC-S1 and S1R full-frame mirrorless cameras, which will be available on July 9th. The new firmware (version 1.1) addresses the following:

Improved image stabilization performance: Panasonic claims that with firmware v1.1, the in-body IS system will reduce shake by an additional 1/2-stop, for a total of 6 stops with non-stabilized lenses and 6.5 stops with Dual IS-compatible glass.

Improved AF performance: Panasonic claims that tracking performance live view display will be improved, and new AF-on options have been added.

  • Tracking performance during video recording has been improved
  • Live view display during autofocusing is now ‘easier to see’
  • A new AF-ON: Near Shift biases toward close subjects, while Far Shift does the opposite

Two smaller changes: An ‘activate’ option has been added to the S1, for entering the key for the optional DMW-SFU2 video feature update. ‘Operational stability’ when using XQD cards should also be improved on both the S1 and S1R.

The firmware will be available for download on Panasonic’s website on the 9th.


On the same day, firmware updates will be made available for six Micro Four Thirds cameras: the Lumix GH5, GH5S, G9, G90/G91/G95, G80/G81/G85 and GX9.

The new firmware addresses various things across those cameras, but the one thing they have in common is adding support for smooth aperture control during video capture when using the Panasonic Leica 10-25mm F1.7 lens. Users can also toggle the aperture ring between ‘smooth’ and 1/3EV. The minor camera-specific changes can be found in the press release below.

Press Release

Panasonic Releases Firmware Update Programs for the LUMIX S1R, S1, GH5, GH5S, G9, G90/G91/G95, G80/G81/G85 and GX9

Newark, NJ (July 1, 2019) – Panasonic has announced that the company will release the firmware update programs for the LUMIX Digital Single Lens Mirrorless cameras to enhance the functions and usability. All programs will be available at LUMIX Global Customer Support website https://av.jpn.support.panasonic.com/support/global/cs/dsc/ at UTC 1:00 on July 9, 2019.

The cameras and the programs to be updated are as follows:

Full-frame Mirrorless Camera

LUMIX S1R Firmware Version 1.1

1. Improved performance of the Body Image Stabilizer

  • The correction performance of the Body Image Stabilizer has been improved from a maximum of 5.5 stops to a maximum of 6.0 stops.*1
  • The correction performance of the Dual I.S.2 has been improved from 6.0 stops to 6.5 stops.*2

*1 Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=50mm, when S-X50 is used.]

*2 Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=105mm, when S-R24105 is used.]

Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=200mm, when S-R70200 is used.]

2. Improved AF performance

  • [AF-ON: Near Shift] and [AF-ON: Far Shift] functions have been added. [AF-ON: Near Shift] preferably focuses on a subject nearby while [AF-ON: Far Shift] preferably focuses on a subject far away.
  • The tracking performance when using [Tracking] AF mode in video recording has been improved.
  • Live view display during auto focusing is now easier to see.

3. Improved operational stability

  • Operational stability when using an XQD memory card has been improved.

LUMIX S1 Firmware Version 1.1

1. Improved performance of the Body Image Stabilizer

  • The correction performance of the Body Image Stabilizer has been improved from a maximum of 5.5 stops to a maximum of 6.0 stops.*1
  • The correction performance of the Dual I.S.2 has been improved from 6.0 stops to 6.5 stops.*2

*1 Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=50mm, when S-X50 is used.]

*2 Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=105mm, when S-R24105 is used.]

Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=200mm, when S-R70200 is used.]

2. Improved AF performance

  • [AF-ON: Near Shift] and [AF-ON: Far Shift] functions have been added. [AF-ON: Near Shift] preferably focuses on a subject nearby while [AF-ON: Far Shift] preferably focuses on a subject far away.
  • The tracking performance when using [Tracking] AF mode in video recording has been improved.
  • Live view display during auto focusing is now easier to see.

3. Function Enhancement with Upgrade Software Key DMW-SFU2

An [Activate] function has been added which enables the use of extended functions using the Upgrade Software Key DMW-SFU2. The following functions will be added by activating the Upgrade Software Key.

  • The video recording modes [MOV]

4K

60p/50p*

4:2:0

8bit

LongGOP

150Mbps

LPCM

30p/25p*

4:2:2

10bit

LongGOP

150Mbps

LPCM

24p

4:2:2

10bit

LongGOP

100Mbps

LPCM

FHD

60p/50p*

4:2:2

10bit

LongGOP

100Mbps

LPCM

30p/25p*

4:2:2

10bit

LongGOP

100Mbps

LPCM

* PAL area only.

?HDMI 4K60p/50p* 4:2:2 10bit output

* PAL area only.

?V-Log will be added in Photo Style.

?The [V-Log View Assist] function will be added, which enables viewing the V-Log file with LUT(Look Up Table) when recording video in V-Log.

?The [Read LUT File] function will be added, which allows users to install and apply their favorite LUT.

?A WFM (Waveform Monitor) display function.

?A [Luminance Level] adjustment function that complies with 10-bit.

?An [XLR Mic Adaptor Setting] function that enables high-res sound recording using the XLR Microphone Adapter DMW-XLR1 (sold separately).*

* MOV only

4. Improved operational stability

  • Operational stability when using an XQD memory card has been improved.

Micro Four Thirds Mirrorless Cameras

GH5 Firmware Version 2.5

1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

  • Smooth aperture control is available during video recording.
  • [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

2. Improved compatibility with the Panasonic Remote Shutter DMW-RS2.

  • The video REC switch on the Remote Shutter can be disabled in the camera’s custom menu.

GH5S Firmware Version 1.3

1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

  • Smooth aperture control is available during video recording.
  • [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

2. Improved compatibility with the Panasonic Remote Shutter DMW-RS2.

  • The video REC switch on the Remote Shutter can be disabled in the camera’s custom menu.

G9 Firmware Version 1.3

1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

  • Smooth aperture control is available during video recording.
  • [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

2. Improved compatibility with the Panasonic Remote Shutter DMW-RS2.

  • The video REC switch on the Remote Shutter can be disabled in the camera’s custom menu.

G90/G91/G95 Firmware Version 1.3

1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

  • Smooth aperture control is available during video recording.
  • [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

2. Improved compatibility with the Panasonic Battery Grip DMW-BGG1.

  • The Fn button on the Battery Grip can be customized in the camera’s custom menu.

G80/G81/G85 Firmware Version 1.3

1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

  • Smooth aperture control is available during video recording.
  • [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

2. Improved compatibility with the Panasonic Remote Shutter DMW-RS2.

  • The video REC switch on the Remote Shutter can be disabled in the camera’s custom menu.

GX9 Firmware Version 1.3

Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

  • Smooth aperture control is available during video recording.
  • [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Firmware update for Panasonic S1/S1R improves image stabilization and AF performance

Posted in Uncategorized

 

Analysis: With new AF firmware, Nikon’s Z6 & Z7 just got more competitive

21 Jun

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_3673238986″,”galleryId”:”3673238986″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });

Nikon has released a much-anticipated firmware update intended to improve autofocus performance from it Z-series mirrorless cameras. Specifically, Nikon promised improvements to autofocus in low contrast and low light shooting situations, but perhaps the most anticipated feature this firmware brings is continuous Eye AF.

As soon as the new firmware became available we updated our Z6 and Z7, and we’ve shot extensively with the updated cameras over the past few weeks. I routinely use a broad spectrum of Eye AF implementations, particularly Sony’s best-in-class one, and I can state up-front that I’ve come away very impressed. But not without a fair share of caveats and suggestions for improvement.

Does the update address the autofocus usability and performance issues we detailed in our Nikon Z7 review? And how does it stack up under the microscope against the best Eye AF systems? Read on to learn more.

Table of contents:

  • Identifying eyes
  • Focusing on unintended subjects
  • Choosing your subject
  • Eye AF accuracy
  • Conclusion
  • Footnote: compared to Canon EOS R / RP
Eye AF on the updated Z6 is so effective that it even found the coach’s eye underneath his cap.

Nikon Z6 | Nikkor 70-200/2.8E FL ED VR

Identifying eyes

When it comes to finding eyes and tracking them, the updated Z cameras compare very favorably to the a7R III.

The Z6 and Z7 are able to routinely identify eyes behind glasses, and even when all you see is a person’s profile, as in the shot above, or this one. It then holds onto the eye nearly as tenaciously as the a7R III. As it turns out, it’s often even better than the Sony at initially identifying eyes in sideways-turned or downward-looking faces. That said, once the a7R III has identified the eye of your subject, it tends to be better at sticking with it, even if their face is turned to a profile. Faces and eyes have to be a bit larger in the frame before Eye AF kicks in on the Nikon, but in practical use this difference is negligible.

A situation where the Nikon Z6 found my daughter’s eye, but the Sony a7R III did not. Unfortunately, as you’ll see in this series of shots, accuracy of focus was comparatively poor, an issue that particularly manifests itself as light levels drop.

Nikon Z6 | Nikkor 35/1.8 S

But simply identifying eyes and faces isn’t all that useful, in and of itself. Accuracy of detection (i.e., not seeing faces where there aren’t any) and accuracy of focus are the more important factors. Let’s investigate.

Focusing on unintended subjects

A downside of Nikon’s eagerness to find faces and eyes means sometimes it finds them where they don’t exist, like in this featureless shag carpet or these trees in the background. When this happens, even if a real face re-appears the camera is often reticent to refocus on it, especially if it’s at a vastly different distance-to-camera. Often the camera will hang on to the mis-identified ‘face’. In comparison I’ve never found Sony cameras to identify a non-human subject as a face or eye.

A downside of just how easily Nikon Z cameras find faces and eyes is that quite often it finds faces in objects that are not faces. In this case, the camera detected a face in the ladder in the background. It was then slow to re-focus on my daughter when she revealed her face again, and in some instances remained on the ladder.

Nikon Z6 | Nikkor 35/1.8 S

This problem with false positives could be worked around if the Z cameras worked more like (recent) Sonys and Canons in which Eye AF works over the top of their subject tracking modes, meaning you can point your initial AF point at your subject to tell the camera what to target.

The omission of Nikon’s excellent 3D AF Tracking feature in the Z-series (and its replacement with an unintuitive, less effective subject tracking mode) was our biggest gripe about the Z-series when it launched. It would have been a perfect mode to layer Eye AF on top of.

Instead, Eye AF is only available in the Zs’ ‘Auto area’ AF mode, where the camera is left to decide what to focus on. While it makes sense that an auto area AF mode might assume that the nearest thing to the camera is your intended subject (see below) this is not always true.

Despite there being two clearly identifiable faces within this scene, in ‘Auto Area’ mode the camera chose the nearest subject. But can you blame it? Most ‘auto’ AF systems are designed to focus on near, central objects because It makes sense, most of the time.

Nikon Z6 | Nikkor 70-200/2.8E FL ED VR

The soccer ball was not my intended subject in the image above, my daughter was. And that’s the problem with Eye AF only being added onto an ‘auto’ mode: you have accept that sometimes the camera will focus with a mind of its own. Most ‘Auto’ area modes tend to prioritize central, nearer objects like the ball above, and that’s not always the thing you want.

There is a way to force the camera to refocus on your subject once its focused on an unintended one (more on that below), but this doesn’t always work reliably. If your subject is at a vastly different distance from the one the camera is currently focused on, the Z6 / Z7 can be particularly reticent to refocus. The AF system either flat out refuses to refocus, or does so hesitantly. This again highlights the need for a robust subject tracking autofocus mode, to which Eye AF should be coupled.

The Z7 initially chose to focus on the background in its ‘Auto area’ AF mode. This is unfortunately common behavior for the Z-series cameras. The bigger problem is that after the camera has focused on the background, it’s reticent to refocus on a foreground subject if the subject is so far from the background that it’s extremely blurred.

Nikon Z7 | Nikkor 50/1.8 S

Choosing your subject

As you can see, most of the problems come from the camera choosing the wrong subject. You are given some tools to rectify this, but these have their own drawbacks. Let first explain why this matters.

Event, wedding, and many other photographers trying to capture candid portraits have a very specific requirement that many manufacturers tended to overlook in the past: the desire to choose which face, among many, to focus on. On the latest Sony cameras you can simply place the AF point over your desired face and half-press the shutter button.

Nikon offers two ways to choose your subject: tap on a detected face or eye on the rear LCD or use the joystick or four-way controller to jump between eyes and faces.

I wasn’t able to select my daughter (in the background) as the target because the Z6’s AF system did not detect her face. If Eye AF were combined with a proper subject tracking mode, as it is for Sony’s ‘Real Time Tracking AF’ or Canon’s Face+Tracking on its EOS R/RP, then I could always rely on the camera at least tracking my daughter, whether or not it has detected her face or eyes.

Nikon Z6 | Nikkor 70-200/2.8E FL ED VR

Normally, tapping on the LCD from ‘auto’ area mode is one way of engaging subject tracking. But if you tap on a detected face, the camera will automatically enter Eye AF mode instead of subject tracking mode. Note though, if you are a bit sloppy with your tap such that the camera ends up tracking a part of your subject’s shoulders or body, the camera may enter subject tracking mode and won’t engage Eye AF until you manually cancel tracking and try again.

Using the joystick to select your subject works quite well on the Z-series cameras

Either way, repeatedly having to take your eye away from the EVF just to tap on the LCD isn’t a great user experience, especially if you’ve just moved from a DSLR and are used to always having your eye to the viewfinder.

Thankfully, using the joystick to select your subject works quite well on the Z-series cameras, even allowing you to quickly toggle between the left and right eye of your subject. There’s a caveat, though: in order for you to switch to a different person, the camera has to have identified that person’s face. In candid shooting, if your subject is looking away, or for some reason isn’t identified as a face, you’ll find yourself repeatedly hitting the joystick or tapping the screen with no result.

Thankfully, a moment later, the Z6 did detect my daughter’s face, and I was able to hit ‘left’ on the joystick to switch from the blonde child to my daughter (in-focus). But this way of choosing your subject can be a gamble, dependent upon whether or not the camera has detected your intended subject as a face / eye to switch to.

Nikon Z6 | Nikkor 70-200/2.8E FL ED VR

In practice, some of these concerns were allayed because the Z6 and Z7 are just so darn good at identifying eyes and faces that more often than not, I was able to select my daughter. And once I’d selected her, it stuck to her like glue. Even if she looked away, the Z6 continued to track her head, ready to jump back to her eye when she faced the camera again. Now, if your subject completely turns its back to you or looks away for long enough, the camera will eventually jump off to another eye in the scene.

So it’s not bad, by any means. However, the very best current system don’t have these problems. The systems introduced in the Sony a9 and a6400 will track a subject and automatically switch in and out of Eye AF as necessary, as it finds or loses them on the subject being tracked. And that’s the bar the Nikons have to live up to.

Eye AF accuracy

Now that we’ve talked about the ability of the cameras to detect eyes and select the right one, let’s get to an arguably more important question: how often are the resultant photos actually focused on the eyes?

In good light, for the most part, the Nikon Z6 and Z7 do a great job of focusing on the eye. It’s a good deal better than Canon, but it doesn’t quite compete with the repeated pinpoint accuracy of Sony’s system, particularly in challenging light as we’ll see below.

While few would complain about the above result (this is a 50% crop), if you roll over to the a7R III example, you’ll see that the eye itself is in better focus, while the Nikon Z7 shot is slightly front-focused. Interestingly, on those occasions when Eye AF accuracy struggled on the Nikon, I almost always found the result to be fractionally front-focused.

Nikon’s Eye AF reticule tends to be rather large, especially compared to Sony’s, and I wonder if this is at least part of the reason. After all, contrasty features around the eye like eyelashes and eyebrows fall in front of the eye. In the image below, focus seems to lie on my daughter’s eyebrow, something that happened with quite some frequency:

I found Eye AF on the Z6 to front-focus more than I’d expect, sometimes significantly so. Here the camera appears to have focused on my daughter’s eyebrow.

Nikon Z6 | Nikkor 35/1.8 S

The extent to which this inaccuracy might affect you will vary from lens to lens. With many lenses and subject distances, the slight difference in distance between an eyebrow and an eye won’t matter. But for shallow depth-of-field applications, and particularly with fast wide primes like the 35/1.8 where the difference in camera-subject distance between the eye and the eyebrow can be significant, I found the inaccuracy to be problematic. Furthermore, if you’re shooting a model with prominent eyelashes, you may end up experiencing more ‘eyelash AF’ than ‘eye AF’.

As light levels drop, accuracy suffers even further. The shot below is severely front-focused, despite light levels being at a modest 4 EV (approx). Interestingly, the camera fared better under similarly dark daylight conditions (as opposed to artificial light). The a7R III did not struggle with accuracy under these conditions.

Even at 4 EV, Eye AF autofocus accuracy can take a dive with artificial lighting. Interestingly, I had better results at similar daylight levels.

Nikon Z6 | Nikkor 35/1.8 S

That’s not to say the Z6 is incapable of capturing accurately focused shots in these lighting conditions. Quite the contrary: I achieved a number of successful shots, like the ones below.

In darker conditions though, down to around -1EV, I was only getting a hit-rate of around one shots in three from the Z6, compared to the Sony a7R III, which typically missed only one or zero shots in a comparable sequence in repeated testing. The Z7 in particular would often hunt, and in Release Priority take completely out-of-focus shots. The Z6 fared better.

Furthermore, the Nikon 35 S and 50 S primes tend to sometimes hesitate to refocus, and this problem was only made more obvious in low light as the AF system tended to slow down. I’d often depress the shutter button and shoot a number of out-of-focus shots before the focus element finally even started to move to the correct position. This seems to be a problem not with Eye AF, but with the default behavior of the AF system, particularly with native lenses (often I achieved better results with adapted F-mount lenses).

In ~1 EV lighting, at best only two of these six shots are critically focused (click image to view 1:1). I had the same hit-rate with a different subject under 1 EV artificial lighting, where only one or two of six shots were critically focused. In all these instances, the eye was successfully detected by the camera.

Nikon Z6 | Nikkor 35/1.8 S

Another (related) area where Eye AF, and focus in general, can struggle is under severely backlit conditions. Here, like many DSLRs, the Z6 can resort to hunting. While I was still able to get the perfectly focused shot on the left, the camera struggled, and many of the shots were misfocused like the one on the right.

In focus one moment…

Nikon Z6 | Nikkor 70-200/2.8E FL ED VR

Out of focus the next.

Nikon Z6 | Nikkor 70-200/2.8E FL ED VR

Conclusion

My goal in this article was to determine when and where the newly introduced Nikon Z6 / 7 Eye AF worked well, and when it didn’t. I tested the performance side-by-side with the Sony a7R III but also considered the best implementation from a usability point-of-view, which is the system in the Sony a9 and a6400.

Because this is a complicated thing to test (thanks for reading this far), I’ve broken our findings up according to four criteria, with winners indicated in bold.

  • Detecting eyes: Nikon Z
  • Avoiding false positives: Sony
  • Eye AF ease-of-use: Sony
  • Accuracy of Eye AF: Sony

Considering the updates in the Z6 and Z7 represent Nikon’s first stab at Eye AF, this is really impressive.

Our main outstanding concerns are twofold: The first is false positives, where the camera will misidentify something as a face and stick to it, and a general tendency of ‘Auto area’ AF to focus and stay focused on the background. Second, and perhaps more important: we’d like to see Eye AF integrated with a reliable and easy-to-use subject tracking mode, like 3D Tracking on the company’s own DSLRs. The only reason we might consider ‘ergonomics of Eye AF’ to be comparable is if we compare the updated Z cameras to the older Sony a7R III. The a9 and a6400, on the other hand, have the best Eye AF implementation to-date, both from a performance and usability standpoint (and as such should be a model for others to follow).

Nikon’s introduction of an effective Eye AF system is a huge step in the right direction

For now, let’s take a step back and give Nikon kudos for the fact that its improved face and eye detection allows me to get shots like the one below without having to think, whereas previously Auto Area mode may well have focused on my daughter’s arm in the foreground.

Face detect worked beautifully here to quickly nail this shot.

Nikon Z7 | Nikkor 50/1.8 S

Nikon’s introduction of an effective Eye AF system is a huge step in the right direction for its mirrorless line of cameras, which even before this update, were already in my opinion the most enjoyable and photographer-friendly of today’s ILCs to shoot with.

If this firmware update is at all indicative of what’s to come from the Nikon Z-series, then we’re keen to see what’s next. The rebirth of 3D Tracking, pretty please?

$ (document).ready(function() { SampleGalleryStripV2({“galleryId”:”3673238986″,”isMobile”:false}) })

Sample photoSample photoSample photoSample photoSample photo

Footnote: For the sake of completeness, we also compared the updated Z6 / Z7 to Canon’s EOS R and RP. The Nikon Z cameras are considerably better at finding eyes than either of the Canons, where the eye has to be pretty big in the frame to even be identified. The updated Z-series cameras are also much more responsive when it comes to tracking the eye: like the Sony a7/R III they follow eyes around the frame quickly, whereas the EOS R / RP lag and frequently have to play ‘catch up’ with moving subjects.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Analysis: With new AF firmware, Nikon’s Z6 & Z7 just got more competitive

Posted in Uncategorized

 

Nikon Z6 and Z7 scoring updated to reflect firmware v2.0

20 Jun

The latest firmware for the Nikon Z6 and Z7 makes a significant difference to the cameras’ usability and focus performance, so we’ve revisited the scoring for both cameras to address the improvements.

Read our analysis of the performance of Nikon’s Eye AF system

We found the Eye AF system significantly improves the ease of shooting with the Z6 and also overcomes many of our concerns about the ability to fine-focus for portraiture. These improvements greatly change the user experience and are enough to bump the camera’s overall score up to 89%, making it the joint high-scorer in its class.

The change to the Z7’s score is less pronounced. This is partly because its 45MP sensor makes the slight inaccuracy of the Eye AF system more significant but also because the update doesn’t appear to make a big improvement to the camera’s low-light AF performance, which was a major factor in the camera’s AF score.

Read our full Nikon Z7 review

Are you going to do this for other cameras?

There have been significant firmware updates for a number of other cameras and we’ll be re-testing and updating those reviews wherever possible.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikon Z6 and Z7 scoring updated to reflect firmware v2.0

Posted in Uncategorized

 

Firmware upgrade brings features from Olympus’s E-M1X to the E-M1 Mark II

19 Jun

Olympus has released a major firmware update for its nearly three-year-old OM-D E-M1 Mark II. Many of the additions come straight from the company’s flagship E-M1X, so now you can have a camera that shares many of the same features but in a much smaller package.

The most significant features include:

  • Autofocus
    • Autofocus algorithms from the E-M1X improves performance tracking moving subjects and makes S-AF more accurate
    • Group 25-point AF mode added; Center priority mode sticks to center focus point and will use surrounding points if subject moves ‘vigorously’
    • ‘Active use’ of PDAF improves performance when shooting video
    • Camera can now focus down to -6EV when using an F1.2 lens
  • Image quality
    • A new ‘Detail Priority’ mode reduces noise (at the expense of burst speed) at low ISOs in JPEGs
    • High ISO performance has been improved by 1/3-stop, according to Olympus
    • ISO 100 (Low) added
    • Anti-flicker mode added
  • Other
    • OM-Log400 added for more flexibility for color grading in video
    • Menus/playback mode can be entered while camera is writing to a memory card
    • Focus Stacking now offers choice of 3-15 shots
    • New Instant Film Art Filter
    • Support for USB Raw Data Edit with Olympus Workspace (see below)
    • Support for new MC-20 teleconverter

You can see the full list of changes in the press release further down this page.

The E-M1X has also received a firmware bump to v1.1, with the only new features being support for the MC-20 teleconverter and USB Raw Data Edit.

Finally, Olympus has updated its Workspace software to version 1.1. The big new feature is the ability to edit Raw images over USB, with the camera doing the processing. Other updates include Focus Stacking from images taken in Focus Bracketing mode and the ability to create Live Composite images.


Press Release

OLYMPUS ANNOUNCES FIRMWARE UPGRADES ENHANCING AUTOFOCUS PERFORMANCE AND IMAGE QUALITY

Version 3.0 for the OM-D® E-M1 Mark II, Version 1.1 for the OM-D E-M1X and Version 1.1 for Olympus® Workspace

CENTER VALLEY, Pa., June 19, 2019 – Olympus is pleased to announce availability of the latest firmware upgrade for two interchangeable lens cameras, Version 3.0 for the Olympus OM-D E-M1 Mark II and Version 1.1 for the Olympus OM-D E-M1X. Additionally, Firmware Version 1.1 is now available for Olympus Workspace. OM-D E-M1 Mark II firmware Version 3.0 adds high-precision autofocus (AF) performance and the high image quality currently available on Olympus’ newest OM-D, the E-M1X. Specifically designed for the professional models in the OM-D series, the OM-D E-M1 Mark II and OM-D E-M1X, this new firmware provides feature enhancements for photographers who require portability and smooth operation of the camera when shooting.

OM-D E-M1 Mark II Firmware Version 3.0: Main Features

Advanced AF Performance

This upgrade utilizes the OM-D E-M1X algorithm, which was developed based on the shooting needs of the professional photographer. With the goal of achieving performance that responds to demanding shooting conditions, such as fast movement in sports, etc., C-AF Center Priority delivers high-precision tracking of moving subjects and sudden subject movement. AF precision for still subjects when using S-AF is improved for various subjects compared to OM-D E-M1 Mark II firmware Version 2.3. Active use of information from the On-chip Phase Detection AF sensor also improves AF performance while shooting video.

Newest AutoFocus Features

Group 25-point has been added to AF Target, and is effective for photographing birds and other small subjects. C-AF Center Priority is now available, and repeatedly autofocuses with priority on the center point in Group 5-point, Group 9-point, and Group 25-point. If AF is not possible in the center point, the peripheral points in the group area assists, which is effective for subjects that move around quickly. In addition, C-AF+MF1 is included which allows users to instantly switch to MF by turning the focus ring while in C-AF for fine tuning the focus.

Low Light Limit Update

The AF low light limit when an f/1.2 lens is attached is -6.0 EV (ISO 100 equivalent for S-AF), enabling high precision focusing in both dark scenes and for low-contrast subjects.

Improved Image Quality

Low ISO Processing (Detail Priority) has been added for higher resolution when shooting at low ISO sensitivity[1], making it possible to reduce noise while shooting with low ISO settings. Compared with OM-D E-M1 Mark II firmware Version 2.3, noise that occurs when shooting at high ISO sensitivity is improved approximately 1/3 of a step.

Support for New Functions in Olympus Workspace

USB RAW Data Edit[2] is now supported for much faster RAW processing in Olympus Workspace by connecting the camera to a computer to use the power of the OM-D E-M1 Mark II TruePic™ VIII image processor.

Enhanced Operability

  • Anti-flicker shooting added to prevent unstable exposure, particularly when sequential shooting indoors.
  • OM-Log400 movie-exclusive picture mode added, allowing the user to shoot movies without loss of details in shadows or highlight blowouts, delivery greater freedom over video creativity through color grading.
  • Frame Rate Priority added to Live View Boost/On2 display, displaying images at a comfortable brightness, even in especially dark locations, such as under a starlit sky without lowering the frame rate.
  • From 3 to 15 shots can be selected in Focus Stacking and guide lines have been added to the shooting area
  • Quick image selection added
  • Setting changes and playback display while writing to card now possible, facilitating quick operation.
  • Instant Film added to Art Filter
  • ISO L100 (ISO 100 equivalent) added

OM-D E-M1X Firmware Version 1.1? Main Features

Support for New Functions in Olympus Workspace

USB RAW Data Edit is now supported for much faster RAW processing in Olympus Workspace by connecting the camera to a computer to use the power of the OM-D E-M1X TruePic VIII image processor.

Olympus Workspace Image Editing Software Version 1.1: Main Features

Focus Stacking added for compositing images shot in Focus Bracketing[3]

Previously, when using Focus Stacking on a computer, it was necessary to use commercially available third party software to composite images. Now, t is possible to composite up to 999 images in Olympus Workspace.

Lighten Composite added

Lighten Composite is now supported by Olympus Workspace, making it possible to create images similar to Live Composite on the camera. Darken Composite has also been added.

Support for New Functions in Olympus Workspace

USB RAW Data Edit has been added for much faster RAW processing in Olympus Workspace by connecting the camera to a computer, using the power of the OM-D E-M1 Mark II and OM-D E-M1X TruePic VIII image processor.

Function Support Chart

? reflects the functions that have been upgraded with the firmware.

Feature

E-M1X Ver. 1.1

E-M1 mark II Ver. 3.0

AF Group Target 25-point

Already available

?

Custom AF Target

Already available

C-AF Center Priority

Already available

?

C-AF Center Start

Already available

?

C-AF+MF

Already available

?

Intelligent Subject Detection AF

Already available

Anti-flicker shooting

Already available

?

OM-Log 400

Already available

?

ISO L100 (ISO 100 equivalent)

Already available

?

Frame Rate Priority on Live View Boost/On2

Already available

?

Focus Stacking: Select from 3 to 15 images

Already available

?

Focus Stacking: Guide line display

Already available

?

Art Filter: Instant Film

Already available

?

Low ISO Processing (Detail Priority)

Already available

?

Setting changes and playback display while writing to card

Already available

?

Quick image selection

Already available

?

USB RAW Data Edit

?

?

Live ND shooting

Already available

Handheld High Res Shot

Already available

High-speed shooting: 120 fps (1920×1080/ MOV)

Already available

Bluetooth® connection

Already available

UHS-II compatible dual card slots

Already available

GPS® / Field Sensor System

Already available

USB power supply/battery charging

Already available

Multi Selector

Already available

Please visit the following URL for access to Olympus software and Digital Camera Updater: https://www.getolympus.com/us/en/software

Pricing and Availability

Firmware Version 3.0 for the Olympus OM-D E-M1 Mark II, Firmware Version 1.1 for the Olympus OM-D E-M1X and Firmware Version 1.1 for Olympus Workspace are available at no charge as an ongoing value demonstrating Olympus’ commitment to continuous product improvements.

[1] May affect the number of sequential shots in normal sequential shooting priority modes.

[2] This new function makes RAW processing much faster by using the TruePic VIII image processor on the camera via USB connection. Olympus Workspace and the supported camera must both be updated with required firmware. The available editing options from Olympus Workspace are limited to RAW editing options that can be handled internally in the camera. Compatible models are OM-D E-M1X and OM-D E-M1 Mark II, and images are saved in JPEG format.

[3] Images must be shot with a lens that supports Focus Stacking.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Firmware upgrade brings features from Olympus’s E-M1X to the E-M1 Mark II

Posted in Uncategorized

 

Sony adds Animal Eye AF to the a6400 with new 2.00 firmware update

13 Jun

Sony has released firmware version 2.00 for its a6400 mirrorless camera, bringing with it Animal Eye AF, support for the RMT-P1BT wireless remote commander and other improvements to help with stability.

It’s been roughly two months since Sony launched firmware updates for its a7R III and a7 III, which brought with them, amongst other things, Sony’s new Animal Eye AF. Now, Sony has brought the system to its crop sensor mirrorless cameras.

As a refresher, Animal Eye AF is an autofocus mode that uses AI-trained algorithms to find and focus on the eyes of wild animals and pets. It works with AF-C focus mode and is activated when the shutter is half-pressed or when assigned to the AF-ON button.

As with the firmware updates for the a7R III and a7 III, Animal Eye AF can’t be used at the same time as Human Eye AF and, due to the extra processing power required to get the job done, it won’t be nearly as fast as the Human Eye AF. Sony has put together a full documentation page detailing the intricacies of Animal Eye AF.

Firmware version 2.00 has also added support for Sony’s RMT-P1BT wireless remote commander and a number of other bug fixes that improve the overall stability and functionality of the a6400.

Firmware version 2.00 can be downloaded from Sony UK’s website for macOS and Windows computers. Installation instructions can be found on the respective download pages.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Sony adds Animal Eye AF to the a6400 with new 2.00 firmware update

Posted in Uncategorized

 

Panasonic S1 firmware update delivers advanced video features

01 Jun

Panasonic has announced an upcoming firmware upgrade for its Lumix DC-S1 full-frame mirrorless camera. Officially referred to as DMW-SFU2, the upgrade adds a number of high-end video features and capabilities, many of which are similar to those found in the company’s GH5 series of cameras, which have often been class-leading when it comes to video.

Most prominent is the addition of Panasonic’s V-Log gamma profile, which promises to deliver 14+ stops of dynamic range. Notably, this is not the truncated V-Log L profile found on the GH-series, which capture a bit less dynamic range due to their smaller sensors. Rather, it’s the same gamma profile used by the company’s VariCam cinema cameras, which should allow the S1 to deliver the same look as VariCam models using the same V-Gamut color space.

Additionally, the upgrade adds 4:2:2 10-bit 4K/30p internal recording, 4:2:2 10-bit 4K/60p recording using an external recorder via HDMI, and 48 kHz/24-bit or 96 kHz/24-bit audio when used with Panasonic’s DMW-XLR1 adapter.

Videographers will be excited to hear that Panasonic is also adding very useful tools like a waveform monitor and in-camera LUTs, which can be used when shooting in V-Log to approximate the look of graded output.

Who should consider this upgrade? If you’re primarily a stills-shooter, or even a video-shooter who mostly shoots casually, it’s possible that none of these new features will be important to you. However, if you’re a serious video shooter who understands the advantages of Log video, or who needs to match footage with other pro video cameras from Panasonic, this is probably an upgrade you’ll want to consider.

The DMW-SFU2 software key will be available in July at a cost of $ 199 in the US, €199 in Europe and £179 in the UK. Panasonic US says the update will be made available free to any existing S1 owners that have registered their camera, and for anyone who buys an S1 before July 31st. In Europe (including the UK) the offer runs until the end of September.

Panasonic to Release the Upgrade Firmware Key DMW-SFU2 for LUMIX S1 in July 2019 to Expand Its Video Performance

Newark, NJ (May 31, 2019) – Panasonic has announced that the company will release an Upgrade Firmware Key DMW-SFU2 for the full-frame mirrorless camera LUMIX S1 in July 2019. This paid software program will further expand the video performance of the LUMIX S1 for advanced video recording. As announced separately, the new LUMIX S1H features 14+ stops of full V-Log, which is equivalent to the V-Log of high-end cinema cameras such as the Cinema VariCam. The user can experience the 14+ stops of V-Log on the LUMIX S1 with the firmware update program provided by the Upgrade Software Key DMW-SFU2, prior to the release of the LUMIX S1H.

Functions available with the upgrade program are as follows.

  • 14+ stops of V-Log recording
  • World’s first 4:2:2 10-bit 4K MOV 30p/25p*1 internal video recording*2
  • World’s first 4:2:2 10-bit 4K 60p/50p*1 HDMI output*2
  • V-Log and V-Gamut compatible with Cinema VariCam Look
  • In-camera LUT (Look Up Table) application enabling playback of V-Log while or after recording (LUT Display with Custom Function)
  • A WFM (Waveform Monitor) displays brightness level while recording
  • High-res 48-kHz/24-bit or 96-kHz/24-bit sound can be recorded in MOV using the XLR Microphone Adaptor DMW-XLR1

The Upgrade Software Key DMW-SFU2 will go on sale in July 2019.

*1 PAL area only

*2 For a full-frame digital still camera as of May 31, 2019.

Design and specifications are subject to change without notice.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Panasonic S1 firmware update delivers advanced video features

Posted in Uncategorized

 

Ricoh announces minor 1.11 firmware update for its GR III camera system

30 May

Ricoh has released firmware version 1.11 for its GR III camera. It’s not a major update, but if you own a GR III, it’s still worth your time to update it.

According to the changelog, firmware version 1.11, an upgrade from 1.10, corrects an issue where playing back a movie on the camera caused the frame rate to drop, as well as an issue where the incorrect firmware was displayed when the GR III was plugged into a macOS computer. Additionally, the update smooths out a number of under-the-hood problems for improved stability.

To update the firmware on your GR III, follow the following steps, as shared by Ricoh:

[1] Provide a formatted SD memory card for the update software. The download file is self-extracting. The following file is extracted. fwdc239b.bin: This is the updated firmware Copy the above Firmware file [fwdc239b.bin] to the root directory in the SD card.
[2] Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
[3] Insert the update SD card (prepared in step 1) into the camera and close card cover.
[4] Turn the camera power on while pressing [Menu] button.
[5] [Update the camera firmware] is displayed Select [Execute] by 4-way button and press [OK] button.
[6] The firmware update will start and [Updating] is displayed. *Do not turn OFF the camera while updating.
[7] When update is completed, “Update completed” will be displayed
[8] Turn OFF the camera and remove the SD card from camera. *Confirm the version of firmware with above [How to check version].
[Caution] When updating is finished, the update SD card still contains the Firmware file. If you want to use this card to take pictures, format the card by the camera to delete firmware file first.

You can download the firmware update (28MB) for macOS and Windows computers on the Ricoh GR III download page.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Ricoh announces minor 1.11 firmware update for its GR III camera system

Posted in Uncategorized

 

Sony pushes firmware updates for eight of its cameras to improve overall stability

18 May

Sony’s software engineers might have some sleep to catch up on, as eight Sony cameras have received incremental firmware updates to smooth out the stability of the cameras.

Specifically, Sony has released firmware updates for its a9 (version 5.01), a7R III (version 3.01), a7 III (version 3.01), a7R II (version 4.01), a7S II (version 3.01), a7 II (version 4.01), a6500 (version 1.06) and a99 II cameras (version 1.01). Sony doesn’t elaborate on what exactly has been fixed, other than to say the updates ‘[improve] the overall stability of the camera[s].’

Before downloading and installing the latest firmware updates, be sure to read through the instructions provided by Sony on each of the firmware update pages linked above.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Sony pushes firmware updates for eight of its cameras to improve overall stability

Posted in Uncategorized