RSS
 

Posts Tagged ‘Canon’

Canon EOS 77D Review

18 Apr

Introduction

The Canon EOS 77D (9000D in Japan) is a lightweight 24MP APS-C DSLR that offers impressive Dual Pixel Autofocus, good external controls and WiFi and Bluetooth connectivity. It slots between the Rebel T7i and EOS 80D, and can be thought of as the successor to the Rebel T6s; if the name doesn’t make that obvious, the specifications and feature additions over its lower-end Rebel sibling should.

Key specifications

  • 24MP sensor with Dual Pixel autofocus
  • 45-point all-cross-type phase-detect autofocus system
  • Digic 7 processor
  • 3″ fully-articulating touchscreen LCD
  • Top plate LCD for shooting information
  • Dual control dials
  • 6fps continuous shooting
  • 1080/60p video capture with microphone input

So is the EOS 77D more than a fancy Rebel in disguise? Well, not really. The only meaningful differentiators between this model and the Rebel T7i it was announced alongside are the dual control dials, top plate LCD and the addition of an AF ON button. Less meaningful differentiators include an extra eight grams of heft and some general button shuffling. And that’s it. In other words, the same relationship was shared by the Rebel T6s and T6i.

All that said, we have to concede the name ’77D’ sounds a lot more serious than either the well-worn Rebel or XX0D monikers, and after all, this is a fairly well-rounded camera. It borrows an awful lot from its up-market EOS 80D cousin, and yet, comes in at a pretty steep discount. Let’s see how they compare in detail.

Among the many things the EOS 77D inherits from the 80D is its 24MP sensor, which is a huge improvement over the sensors in previous ‘s’ Rebels.
Processed to taste in Adobe Camera Raw. ISO 100 | 1/640 sec | F8
Photo by Carey Rose

Spec comparison

  Rebel T7i/800D EOS 77D EOS 80D
MSRP (body only) $ 749  $ 899 $ 1199
Sensor 24.2MP APS-C CMOS
Processor Digic 7 Digic 6
ISO range ISO 100-25600
(expands to 51200)
ISO 100-12800
(expands to 25600)
AF system  Dual Pixel + 45-pt all-cross-type
Shutter speed 30 – 1/4000 sec 30 – 1/8000 sec 
X-sync 1/200 sec 1/250 sec
LCD size/type 3″ fully-articulating touchscreen (1.04M-dot) 
Viewfinder mag/coverage 0.82x / 95% 0.95x / 100%
(‘Intelligent’)
Control dials One Two
AF ON button No Yes
Top plate LCD No Yes
Max Continuous 6 fps  7 fps
Video 1920 x 1080 @ 60p/30p/24p
Headphone jack No Yes
Bluetooth Yes No
Battery life (CIPA) 600 shots 960 shots
Battery grip No Optional
Weather-sealing No Yes
Dimensions 131 x 100 x 76mm 131 x 100 x 76mm 139 x 105 x 79mm
Weight (CIPA) 532 g  540 g 730 g

The EOS 77D then will broadly appeal to the same sort of consumer as the T6s/760D; namely, the photographer with enough experience to want a more hands-on approach and who must have an optical viewfinder of some sort. All of the not-insignificant advancements in the EOS 77D and the Rebel T7i make them compelling upgrade choices for users of previous Rebel (and even some X0D) cameras.

Edited to taste in Adobe Camera Raw. ISO 640 | 1/500 sec | F5.6
Photo by Jeff Keller

If you can forego an optical viewfinder, one could easily make an argument for the Fujifilm X-T20 or Sony’s a6300, both of which offer 4K video and much faster burst shooting in smaller packages (though the a6300 lacks the level of direct control the 77D offers), and there’s also the new Canon EOS M6, which shares an awful lot with the 77D under its skin. 

But with the addition of Dual Pixel AF, Live View shooting on the EOS 77D is arguably just as robust (if not more so, in some situations) than either the Fujifilm or Sony mirrorless options. And that gets to the heart of what really makes the EOS 77D so appealing; it may not offer the best of both the DSLR and mirrorless worlds, but it does offer a compelling balance at this price point.

So does the EOS 77D have what it takes to be your next camera? Let’s find out.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon EOS 77D Review

Posted in Uncategorized

 

Canon EOS 5D Mark IV firmware 1.0.4 launches with bug fixes

14 Apr

Canon EOS 5D Mark IV firmware version 1.0.4 has been released, and it brings with it a handful of minor bug fixes and improvements. According to the new version’s release notes, 1.0.4 ‘enhances’ communication reliability between the SD card and camera, as well as fixing a Finnish language word error, an image issue experienced during long exposures and in bulb mode, and a problem with autofocus.

The full release notes:

Firmware Version 1.0.4 incorporates the following fixes and improvements:

  • 1. Fixes a phenomenon in which a red-colored area may appear at the bottom-center of a captured image when shooting in bulb mode or during a long exposure.
  • 2. Fixes a phenomenon in which the autofocus may not respond when the autofocus is initiated via pressing the shutter button, the AF-ON button or the AE lock button when configured in the custom control menu.
  • 3. Enhances the reliability of communications between the camera and SD card.
  • 4. Fixes incorrect wording on the Finnish language menu screen.

The firmware is available to download now from Canon’s support website.

Via: CanonRumors

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon EOS 5D Mark IV firmware 1.0.4 launches with bug fixes

Posted in Uncategorized

 

Canon EOS Rebel T7i / EOS 800D Sample Gallery

07 Apr

We’ve posted an assortment of photos from Canon’s EOS Rebel T7i / 800D, which is the midrange camera in Canon’s lower-end DSLR lineup. The T7i features a 24MP APS-C sensor with Dual Pixel autofocus, fully articulating LCD and snappy DIGIC 7 processor.

It’s Spring here in Seattle, so expect plenty of flower photos!

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon EOS Rebel T7i / EOS 800D Sample Gallery

Posted in Uncategorized

 

Canon outfits industrial drone with ME20F-SH all-purpose camera

06 Apr

If you’re looking for a drone that can fly in nasty weather and see in the dark, then Canon has something for you. The PD6E2000-AW-CJ1 is an industrial drone with a Canon ME20F-SH all-purpose camera designed to help in disaster relief, thanks to its ability to shoot at ISO 4 million and generally see in the dark. 

It’s not a Canon-made drone. In late 2016 Canon Marketing Japan made an investment in Prodrone Co., a Japanese drone maker, stating that Canon would install imaging devices on the company’s drones and act as a principal distributor. Canon is aiming for ¥5 billion worth of drone-related imaging sales by 2020.

The PD6E2000-AW-CJ1 (say that five times fast) appears to be based on Prodrone’s all-weather PD6-AW, which supports a 10 kg / 22 lb payload, can fly at up to 65 km/h / 40 mph and can handle wind speeds up to 10 m/s / 22 mph. Take a look at the drone in action below.

Via: Canon Rumors Source: Canon

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon outfits industrial drone with ME20F-SH all-purpose camera

Posted in Uncategorized

 

Throwback Thursday: Entering the DSLR world with the Canon EOS 10D

06 Apr

A few months ago I wrote a short article about the Canon EOS D30. The D30 was a groundbreaking camera in its day, being the first ‘affordable’ DSLR and the first to feature a large-format CMOS sensor. Yes, its autofocus system was woeful, and the LCD display on the back was about as useful as making a sketch from memory, but back in 2000, everybody wanted one.

I was definitely curious about the D30, but given that in 2000 I was a first-year undergraduate student, such an expensive camera was far beyond my reach. It would be another couple of years before I saved up enough money to buy my first DSLR, and the camera I eventually settled on was the successor to the successor of the EOS D30 – the counterintuitively named Canon EOS 10D1.

The break with Canon’s previous naming convention was appropriate, though. The 10D was a substantially new camera compared to the models that preceded it, and it replaced the D60 with an almost indecent haste (the D60 had been on the market for little more than a year before the 10D came along). Compared to the plastic-bodied D30/D60 it was better built, featured a far superior rear LCD (with a usable magnification feature) offered a more rounded styling, closer in spirit to the EOS-1D series, and was much quicker in operation.

The 10D was a thoroughly modern camera in 2003, and remained on the market for some time. Canon took the basic form factor of the D60 and modernized every aspect of that model’s performance and styling.

The 10D’s DIGIC processor drove a blisteringly fast (ahem…) continuous shooting rate of 3 fps, operation was snappier, including reduced shutter-lag, and the 10D’s 7-point autofocus system was a huge improvement over the 3-point system in the D30 and D60, which seemed prehistoric even back then. Although the 10D’s 6MP CMOS sensor was based on the one previously used in the D60, Canon had refined the manufacturing process in the meantime. Consequently it offered slightly better resolution than its predecessor, superior noise performance and a wider ISO span, topping out at a grainy but usable ISO 3200.

Remarkably, despite all of these improvements, the 10D was also $ 500 cheaper than the D60.

Although it definitely wasn’t in the same ballpark as the EOS-1D in terms of speed or construction, the 10D beat the pants off Canon’s then-current pro sports model in terms of image quality. Significantly, the core specification of the 10D was close enough to the EOS 30 / Elan 7 that film holdouts didn’t have to feel too badly short-changed by the costly jump into digital.

With the EOS 10D’s accessory grip attached, it was almost possible to believe that I was shooting with an EOS-1D.

Almost…

So, to recap – the 10D offered a very usable sensitivity range of ISO 100-3200, 3 fps continuous shooting, 7-point AF system, magnesium-alloy body shell and a substantial price reduction. In 2003, it all added up to a hugely desirable camera.2

Canon EOS 10D Sample images (2004-5)

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_8248806925″,”galleryId”:”8248806925″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });

Because it was so popular, the 10D was pretty scarce for several months after its introduction. After saving up my wages for an entire summer (a story told in more detail here), I ended up purchasing mine from a ‘big box’ high-street retailer, because it was out of stock everywhere else – something I later came to regret.

I decided to pull the trigger on a 10D for several reasons. In a rare attack of foresight, I determined that this digital thing probably wasn’t a fad, and with ambitions to become a photographer of some kind, it seemed sensible to dive in as soon as possible. And while previous DSLRs had felt like too much of a compromise, the 10D seemed to meet my most important criteria.

As a budding theatre and live music photographer, I was hitting the limits of what I could do with film, both technically and practically. Technically speaking, high ISO film exposed in marginal light and processed at your average high-street pharmacy simply doesn’t look very good – especially if you’re talking about high-speed color emulsions. From a practical standpoint, development and printing turnaround times were a problem if I wanted to get images to people quickly. And forget about serious commercial work – by 2003, the magazines and websites I was interested in working for were increasingly insisting on digital file delivery.

A typical monochrome conversion of a shot taken in the Assembly Rooms Theatre. The 10D’s highest ISO settings were grainy, but perfectly usable – especially when converted into black and white.

The first quasi ‘commercial’ work I ever did was head-shots and performance images for Durham University’s student theatre. Student productions rotated every few weeks, and every production wanted some prints to display outside the theatre. I can’t remember the first production that I shot digitally (was it Harold Pinter’s ‘The Caretaker’?)3 but compared to film, it was vastly easier. Ironically, I was a sort of caretaker for the theatre at the time, since I lived in a small flat above the lobby. Being able to shoot a dress-rehearsal in the theatre, then head upstairs to make my edit and print the images – sometimes all in the same evening – was a revelation. I can’t remember how much I charged for my services, but I made enough over a couple of years to buy a couple of new lenses.

And for a while it seemed like it was lenses that were the problem. Initially I had two lenses for my 10D. A 50mm F1.8 (of course), and a 24-70mm F2.8L. Later I added a 70-200mm F2.8L and a 17-40mm F4L (all purchased used). The 10D worked perfectly with all of them, except the 24-70mm. For whatever reason, camera and lens did not get on at all. Chronic back-focusing was apparent even through the 10D’s viewfinder, and this was before the days of AF micro-adjustment. The 24-70mm was simply unusable on my 10D, but it focused perfectly on other DSLRs that I borrowed from friends, or rented in an increasingly desperate attempt to figure out what was going on.

A live shot from one of my first proper commissions – a major awards show tour that came through Newcastle in 2005 – not far from where I lived at the time. It looks like I benefited a bit from someone else’s flash, in this shot. Thank you – whoever you were.

The retailer I bought my 10D from wasn’t particularly interested in helping, so I sent it back to Canon at least four times during the first year I owned it, shooting on film during the long intervals when it was away for service. Every time it came back as ‘up to specification,’ but the back-focusing problem remained. Finally, after a lot of back and forth, I send the 10D in with the troublesome 24-70mm, and was rewarded with a ‘fixed’ camera, complete – funnily enough – with a new serial number. Knowing what I know now, I should have sent the camera and lens back together in the first place.

Even this frustrating experience wasn’t enough to dull my excitement at owning and using the 10D. It really was a fantastic camera at the time, and it helped me gain a footing in the not-at-all-lucrative world of performance photography. My first magazine commissions were shot with the 10D. I learned about the benefits of shooting Raw with the 10D (albeit rather belatedly). The first camera I ever had confiscated at a music venue4 was the 10D. It was my main camera for a couple of very formative years, before being relegated as a second body beside to the truly magnificent EOS-1D Mark II (which I’m hoping to write about at a later date).

The 10D couldn’t do everything (it choked up when shooting several Raw files in a sequence, and in low light its off-center AF points were little more than decorative), but it opened up a completely new world for me.

One of my favorite bands of the mid-2000s was ‘Hope of the States’. I probably photographed them more than any other band, for a while. This shot is from another awards show in London in 2005. Despite the off-center composition, most likely I used the central AF point for this image, since the 10D’s off-center points didn’t work very well at all in low light.

And it’s a world I’m still living in. Without the 10D, there is no doubt in my mind that I wouldn’t have become a music photographer, and if I hadn’t become a music photographer, I probably wouldn’t have ended up as a photography journalist. Whether or not that’s a good thing is something I’m happy to leave to the commenters to decide.

Did you own a 10D? Let us know.

Read Phil Askey’s review of the EOS 10D (2003)

Canon EOS 10D Review Samples (2003)

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_5774422920″,”galleryId”:”5774422920″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });


1 A note on Canon’s confusing naming convention. The ‘D30’ because it was a digital camera with 3 million pixels. The D60 because it was basically a D30 with a new 6 million pixel sensor. And the switch to 10D because – I assume – Canon and Nikon’s lawyers had a little chat.

2 In fact, just about the only people who weren’t singing Canon’s praises at the time were recent D60 owners.

3 The Assembly Rooms – it’s still there, and this being student theatre, there’s every chance that they’re currently staging a production of Harold Pinter’s ‘The Caretaker’, too.

4 It was all just one big misunderstanding. Specifically around two people’s definitions of the word ‘permission’. 

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Throwback Thursday: Entering the DSLR world with the Canon EOS 10D

Posted in Uncategorized

 

Canon introduces EF-S 35mm F2.8 macro lens with built-in ring light

06 Apr

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_8064378539″,”galleryId”:”8064378539″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });

Canon has introduced a compact 35mm F2.8 IS STM macro lens for crop-sensor DSLRs. Similar to the EF-M 28mm F3.5 Macro lens introduced a year ago, the 35mm F2.8 has a built-in LED ring light. 

The lens, which is equivalent to 56mm when mounted on crop body, has a minimum focus distance of just 3 cm (1.2 in.). It uses Canon’s ‘Hybrid’ IS system, with up to four stops of shake reduction. Canon says that the lead-screw-type STM motor allows for quiet AF operation, which is ideal for video capture. The lens has seven rounded aperture blades as well as a glass-molded aspherical element.

The EF-S 35mm F2.8 IS STM lens will ship this June with an MSRP of $ 349.

Press Release

UP CLOSE AND PERSONAL: CANON ANNOUNCES NEW EF-S 35MM F/2.8 MACRO IS STM LENS TO HELP EXPLORE THE BEAUTY OF MACRO PHOTOGRAPHY

New Compact and Lightweight EF-S Macro Lens Opens Up a World of Photographic Possibilities and Helps Capture Close Subjects with Incredible Detail

MELVILLE, N.Y., April 6, 2017 – Compact and lightweight, the new Canon EF-S 35mm f/2.8 Macro IS STM, announced today by Canon U.S.A., Inc., a leader in digital imaging solutions, is the widest-angle Macro offering in Canon’s popular EF-S lens series. The new lens is designed to help both entry-level and advanced amateur DSLR photographers discover the incredible possibilities of macro photography. Capable of capturing close-up subjects with incredible detail, Canon’s new EF-S macro lens is also the first in the series to feature built-in Macro Lites that allow users to control lighting with ease.

“Macro lenses are an amazing way to explore the worlds that exist all around us, and the new Canon EF-S 35mm f/2.8 Macro IS STM lens is the ideal starting point for amateur photographers eager to capture incredible, up-close details on the go,” said Yuichi Ishizuka, president and COO, Canon U.S.A., Inc. “Whether capturing a delectable dessert or the subtleties of a backyard flower, users will be challenged to find new colors and shapes that turn everyday moments into art.”

The new Canon EF-S 35mm f/2.8 Macro IS STM captures stunning images and is a terrific companion lens for entry-level users eager to expand beyond their existing Canon EOS DSLR kit lens. Capable of shooting as close as 30mm from the end of the lens to the subject, aspiring photographers can get up close to a fruit or flower for an entirely new perspective, while capturing high-quality images with beautiful background blur. Additional technologies built into the new Canon EF-S 35mm f/2.8 Macro IS STM lens include:

  • Popular 35mm focal length (56mm equivalent) and wide f/2.8 aperture
  • Hybrid IS system offers up to four stops* of shake correction
  • Smooth Movie Servo AF with Lead Screw-type STM ensures quiet AF operation
  • Full-time Manual Focus

In a first for the EF-S lens series, the new Canon EF-S 35mm lens sports built-in Macro Lites that allow photographers to carefully arrange macro lighting without using special equipment. With built-in LED lights on each side of the lens, users can create compelling shadows on either side of a subject or adjust intensity to give images a sense of dimension. Once the scene is set, the lens uses superb rendering performance to capture high contrast, sharp images.

While specialized for high magnification photography, the Canon EF-S 35mm f/2.8 Macro IS STM is still a versatile option for day-to-day use, easily capable of capturing portraits, landscapes or snapshots. As the latest addition to the lineup of EF-S lenses, Canon continues its commitment to providing a wide-range of affordable lens options for photographers of all levels.

The Canon EF-S 35mm f/2.8 Macro IS STM lens is scheduled to be available in June 2017 for an estimated retail price of $ 349.99.

Canon EF-S 35mm F2.8 Macro IS STM specifications

Principal specifications
Lens type Prime lens
Max Format size APS-C / DX
Focal length 35 mm
Image stabilization Yes (4 stops)
Lens mount Canon EF-S
Aperture
Maximum aperture F2.8
Aperture ring No
Number of diaphragm blades 7
Optics
Elements 10
Groups 6
Special elements / coatings Glass-molded aspheric element
Focus
Minimum focus 0.03 m (1.18)
Maximum magnification 1×
Autofocus Yes
Motor type Stepper motor
Full time manual Yes
Focus method Internal
Distance scale No
DoF scale No
Focus distance limiter No
Physical
Weight 190 g (0.42 lb)
Diameter 69 mm (2.72)
Length 56 mm (2.2)
Sealing No
Colour Black
Filter thread 49.0 mm
Hood supplied Yes
Tripod collar No

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon introduces EF-S 35mm F2.8 macro lens with built-in ring light

Posted in Uncategorized

 

Magic Lantern brings 4K recording to the Canon EOS 5D Mark III

05 Apr

Magic Lantern made April fools of us all by going live with an experimental build for the Canon EOS 5D Mark III on April 1st. It’s in early stages of development but it’s the real deal, and brings experimental Raw 4K video recording to the 5D III, among other things.

The build adds the following recording resolutions to the camera:

1920×960 @ 50p (both 1:1 crop and full-frame – 3×3 pixel binning)
1920×800 @ 60p (same as above)
1920×1080 @ 45p and 48p (3×3 binning)
1920×1920 @ 24p (1:1 square crop)
3072×1920 @ 24p (1:1 crop)
3840×1600 @ 24p (1:1 crop)
4096×2560 @ 12.5p (1:1 crop)
4096×1440 @ 25p (1:1 crop)

Once downloaded, it’ll look like this:

Stills shooters will also find a ‘full-resolution LiveView’ mode that shoots 5796×3870 at 7.4 fps. Magic Lantern notes that this mode is usable at fast shutter speeds, but comes with rolling shutter.

Magic Lantern states that anyone who downloads the build should know that it’s still quite bleeding edge, with plenty of bugs to work through. And of course, ML also wants you to know that using their software will probably void your warranty.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Magic Lantern brings 4K recording to the Canon EOS 5D Mark III

Posted in Uncategorized

 

Canon EOS M6 sample gallery

28 Mar

The Canon EOS M6 shares plenty of features with the company’s EOS M5 flagship mirrorless camera, including a 24MP APS-C sensor with Dual Pixel AF, a Digic 7 processor and a 3″ touchscreen. It offers one more control dial compared to its M3 predecessor, but stops short of offering the M5’s built-in EVF. With a loaner unit in hand we ventured out into the street to start putting it to use – take a look at what it can do.

See our Canon EOS M6 sample gallery

$ (document).ready(function() { SampleGalleryStripV2({“galleryId”:”4783759740″}) })

Sample photoSample photoSample photoSample photoSample photo

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon EOS M6 sample gallery

Posted in Uncategorized

 

Canon EOS 77D / 9000D sample gallery

23 Mar

With a Rebel on one side and an 80D on the other, the Canon EOS 77D appears to occupy an interesting space in Canon’s DSLR lineup. We haven’t wasted any time getting our loaner unit out into the great outdoors (and the great indoors, for that matter). Take a look at our initial sample gallery, and stay tuned for updates once we get Raw support.

See our Canon EOS 77D sample gallery

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Canon EOS 77D / 9000D sample gallery

Posted in Uncategorized

 

We asked three Canon lens masters to name their first and favorite lens designs

22 Mar

What is your first and your favorite Canon lens?

It’s not everyday you get to sit down with three master lens designers, but it’s also not every day you tour Canon’s Utsunomiya lens factory (read the interview and take the tour). Each of the three gentlemen we posed our two questions to – what was the first lens you designed and what is your favorite lens – has decades of experience designing Canon glass.

Masato Okada (center), the Deputy Chief Executive of Image Communication Products and Operations, first began designing lenses for Canon back in 1982. Meanwhile, Kenichi Izuki (right), the Plant Manager and Masato Okada (left), the Deputy Chief Executive of Image Communication and Products Operations, have each been designing Canon lenses since the late 80’s/early 90’s.

It takes decades of experience to design a lens like the Canon EF 16-35mm F2.8L III USM.

What was the first lens design you worked on at Canon?

Masato Okada: “It would go back many years, maybe you weren’t even born yet (Editor’s note: I was not), but the first lens I worked on was the FD 150-600mm F5.6L. It was one of those lenses where it was on a box and you actually had a one-touch action to do the zoom and one-touch action to do the focus. That was a big revelation.”

Masato Okada is the Deputy Chief Executive of Image Communication and Products Operations at Canon’s Utsunomiya lens factory. 

What was the first lens design you worked on at Canon?

Shingo Hayakawa: “It launched in 1991, the 75-300mm F4-5.6 USM, was the first lens I worked on and also the very first lens in that series. At the time, we actually launched the product at a lower price than the third party manufacturers, which was big news. The version “III” of that lens is still on the market.”

Shingo Hayakawa is the Deputy Group Executive of Image Communication and Products Operations at Canon’s Utsunomiya lens factory.

What was the first lens design you worked on at Canon?

Kenichi Izuki: “Because I joined Canon as a technical engineer I have so many memories of all the products I’ve worked on. Initially, I handled maybe 10 products over the course of a year. But the very first one that I worked on, which is now discontinued, is the EF 100-300mm F4.5-5.6 USM. It’s also one of my favorites.”

Kenichi Izuki is the Plant Manager at Canon’s Utsunomiya lens factory.

What is your favorite Canon lens design?

Masato Okada: “For me I’d have to say the 11-24mm F4L USM, because when launched, it allowed the widest angle possible on a full frame with no distortion. And I was torn at the time of production because we could have gone for the 12-24mm F2.8, which I thought would be more customer-prone. But I was developing the lens more in terms of particular users: a videographer for example, needing that extra field of view, even if they can’t physically back out. Other manufacturers were doing the 12-24mm, but only Canon was doing 11-24mm. We thought it was something we should go for. And it was really difficult in terms of the design for mass production. So because of those challenges, I’d say this would be my pick.”

Masato Okada is the Deputy Chief Executive of Image Communication and Products Operations at Canon’s Utsunomiya lens factory.

What is your favorite Canon lens design?

Shingo Hayakawa: “I can say that in terms of the lenses we’ve been launching over the years, we’re proud of them all. But the ones that came out last year in 2016, the 16-35mm F2.8L III USM in particular, was very highly spec’d at the time of its release. I’m proud of it because it has amazing performance and resolution. But if I were to narrow it down, my choice would be a lens that came out in 2012: the Canon 24-70mm F2.8L II USM. And if I were to choose a telephoto, I’d say the 200-400mm F4L IS USM with the 1.4x internal extender. But the 24-70mm II is my overall pick.”

Shingo Hayakawa is the Deputy Group Executive of Image Communication and Products Operations at Canon’s Utsunomiya lens factory.

What is your favorite Canon lens design?

Kenichi Izuki: “My favorite, which I truly remember because it was so hard to design, was the original Canon 70-200 F2.8 L USM non-IS. I actually worked on the 70-200mm F2.8L USM version II with IS when I became a manager of the division. That posed a challenge because we had to exceed the requirements of the previous version.”

Kenichi Izuki is the Plant Manager at Canon’s Utsunomiya lens factory.

Have your say, what’s your favorite Canon lens?

So what do you think of the responses we received – were there any surprises? And what is your all time favorite Canon lens? Let us know in the comments!

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on We asked three Canon lens masters to name their first and favorite lens designs

Posted in Uncategorized