RSS
 

Archive for October, 2017

12 Tips for Better Nighttime Event Photography

25 Oct

There’s no way around it: doing nighttime event photography is tricky. Festivals, ceremonies, parties, and parades involve fast action, difficult lighting conditions, and hectic environments. It’s no wonder that first attempts at nighttime event photography often result in blurry and unusable images. Fear not – this article will help you get up to speed.

12 Tips for Better Nighttime Event Photography

1.  Know the pros and cons of different lens types

Instead of telling you, “use a fixed focal length lens with a wide aperture,” I want you to maintain an open mind to zoom lenses. Prime lenses are my first choice for shooting nighttime events where I’m free to move and get close to my subjects. However, for events where I’m confined to the audience or press section, I need the ability to zoom, frame, and isolate subjects without moving all that much.

In this article, the example images are a 50/50 mix of fixed focal length and zoom lenses. Through this, you’ll see what is possible with each type. Although zoom lenses with wide apertures (i.e., a Nikon 24-70mm f/2.8) are often said to be ideal for nighttime events, they are extremely expensive pieces of equipment.

12 Tips for Better Nighttime Event Photography

A scene from the Keelung Ghost Festival parade on September 4th, 2017 – Taiwan. This is a solid example of a nighttime event for which I chose a zoom lens over a prime. I was shooting from the press sectionthe edge of a wide boulevard on the action side of the crowd barrierand I could only move from side to side, not towards the action. Therefore, the ability to frame shots using a zoom lens was crucial to me.

2. Focus on the interplay of shutter speed, aperture, and ISO

Because creating a correct exposure is a balancing act between various settings, the next step is to focus on the interplay between shutter speed, aperture, and ISO. Generally, you want your nighttime event images to be sharp; therefore, make a fast shutter speed your priority.

With a prime lens, select a wide aperture (try f/2.8) and increase the ISO until your test shots register a shutter speed of 1/125th or preferably higher. Shooting wide open (i.e., f/1.4 or f/1.8) will result in slow autofocusing and you missing your shot. Go higher to avoid these problems.

With a zoom lens, select the widest available aperture available (i.e., f/4.0) and crank the ISO up high. I usually select ISO 3200 and fire off some test shots of a moving subject. Using these settings in aperture priority mode, I was able to achieve a shutter speed of 1/640th for the image below.

12 Tips for Better Nighttime Event Photography

A costumed performer dressed as a Chinese god runs straight towards me – Keelung, Taiwan. 1/640th | f/4.0 | ISO 3200 | Canon 24-105mm f/4 L.

3. Utilize available light

For my style of travel photography, I rarely use a flash; I prefer the results from utilizing available light. It takes a great deal of skill to use a flash in a way that compliments your images rather than detracts from them. Therefore, I recommend saving it for a later, more advanced stage of your photography journey.

12 Tips for Better Nighttime Event Photography

Pirouetting gypsy-style dancers amaze the crowd – Keelung, Taiwan. 1/250th | f/4.0 | ISO 3200 | Canon 24-105mm f/4 L. I waited until these dancers were beneath a spotlight to utilize this light source and achieve a faster shutter speed.

4. Get close to the action

Get as close as possible without disturbing the event’s participants. For the image below, I was in Manipur, a remote Indian state on the border with Myanmar. I sat cross-legged just as the boys opposite me were doing, which was fine until the real fighting began. This martial arts demonstration took place after dark in a poorly lit pagoda. It was hard enough to focus my eyes, let alone my camera. I had to push my ISO to the limits, even though I was using a prime lens.

The ancient Manipuri martial art of Thang Ta. This was the most challenging lighting condition I have ever shot in.  1/80th | f/1.4 | ISO 25,600 | Sigma 35mm 1.4 Art. You read that right – ISO 25,600! Note the noise.

5. Ask your subjects to move

At nighttime events, I am always on the lookout for well-lit spots. I want a place with bright artificial light that I can utilize to increase my shutter speed. Once I’ve found both the spot and my willing portrait subject, I ask them if they would be kind enough to step into the light. This is the best method for capturing beautiful portraits at nighttime events without a flash.

12 Tips for Better Nighttime Event Photography

Girl of the Meitei ethnic group at the Lai Haraoba festival – Manipur. The temple where the festival was taking place was dimly lit; however, one corner had the light I was looking for. She agreed to move, which allowed me to achieve a shutter speed of 1/200th.

6. Use continuous shooting mode

Once you have nailed your settings in combination with the available light, I recommend that you set your camera to continuous shooting mode. Take a look at the image below. I took five similar shots within fractions of a second of each other, and could then select the image with the best composition, facial expressions, and lighting when I was back at home.

Children’s rollerblade display team at the Ghost Festival parade – Keelung, Taiwan. 1/250th | f/4.0 | ISO 3200 | Canon 24-105mm f/4 L

7. Observe, anticipate, and shoot

Another technique is to spend time observing the event. Look for patterns in movement and people that would make the best subjects. Try to compose the shot you want to take in your head. Next, get into position and select your settings. Anticipate what is likely to happen and be ready when it does. Finally, shoot away.

12 Tips for Better Nighttime Event Photography

Ladies performing a dance for the Lai Haraoba festival – Manipur, India. The dance involved moving slowly in a circle for one hour or longer. I was able to observe full rotations, anticipate exactly where to stand for the best view and light, and then shoot when the ladies came back around.

8. Frame using the environment and set the scene with the background

This is a valuable technique for increasing the visual interest and storytelling elements in your nighttime event shots. Be on the lookout for environmental features, which could also take the form of other people, to frame your shots. Take a look at the example below.

The younger Manipuri ladies watched their elders’ intricate hand movements to check if their own were correct. To communicate this detail, I framed the shot from behind the two oldest women and used their heads to frame the younger ladies looking back at them.

9. Move and use your feet

Your legs are your zoom when you’re using a fixed focal length lens. Throw yourself into the action. Crouch, climb and run your way to finding interesting angles and available light. In the image below, I left my seated position among the crowd, stood below the stage looking up at the priest, and composed the shot.

12 Tips for Better Nighttime Event Photography

Hindu priest performing the Ganga Aarti ceremony – Varanasi, India. 1/125th | f/1.4 | ISO 1250 | Sigma 35mm 1.4 Art

10. Interact with your subjects

Get the attention of your subjects and make eye contact before raising your camera. I remember waving, smiling, and shouting “Ni hao!” to the performer in the image below, which led to a series of interactions and photo opportunities.

12 Tips for Better Nighttime Event Photography

A performer at the September 4th Ghost Festival parade in Keelung, Taiwan interacted with me directly after I initiated contact. 1/125th | f/4.0 | ISO 3200 | Canon 24-105mm f/4 L

11. People expect to be photographed. Don’t hold back.

This isn’t street photography. The protagonists and guests at your event, particularly festivals and parades, probably expect to be photographed. An exception to this would be religious ceremonies, which require extra sensitivity on your part. Ask permission from someone in charge, and if someone asks you not to photograph them you should absolutely respect their wishes.

12 Tips for Better Nighttime Event Photography

Taiwanese lady marching with members of her organization in the Keelung parade. 1/400th | f/4.0 | ISO 3200 | Canon 24-105mm f/4 L

12. Research your location ahead of time

Finally, pick an event ahead of time and research it. Consider attending on two different nights with two different sets of objectives. This is what I did when I attended the Ganga Aarti ceremony in Varanasi, India. The first night, I used a 35mm prime lens and focused on close-up action shots and portraits. The second night, I shot the ceremony from a boat on the Ganges using a 24-105mm zoom lens.

12 Tips for Better Nighttime Event Photography

Walking across tightly-packed boats on the Ganges, this boy used his thumb to brush colored powder onto the forehead of anyone with 10 rupees to offer – Varanasi, India. 1/50th | f/4.0 | ISO 3200 | Canon 24-105mm f/4 L. Note the lower shutter speed, which ended up not really mattering. Through spot metering off the flames and utilizing available light, I was able to come away with not only a usable image but also one of my favorite shots from two months in India.

Conclusion

Put these 12 tips for better nighttime event photography into practice soon. Why not look in your local newspaper and check for events that you could attend this week? Don’t forget to share your comments and images below.

The post 12 Tips for Better Nighttime Event Photography by Ben McKechnie appeared first on Digital Photography School.


Digital Photography School

 
Comments Off on 12 Tips for Better Nighttime Event Photography

Posted in Photography

 

The Winners of the Three NYIP Photography Courses Are . . .

25 Oct

The winners of the four NYIP photography courses are…

A BIG thank you to everyone who entered our recent competition to win one of three photography courses from our friends at NYIP.

The response was wonderful. In fact, it was so wonderful that the team at NYIP decided to offer a special 20% discount off any of their courses (details below). But first – here are the three winners of the competition for Fundamentals of Digital Photography Course – worth $ 749 (winners chosen by NYIP):

  • ETricco
  • Felicia Giberson
  • SD Art Teacher

A Message from NYIP (and a 20% discount)

“Congratulations to all three winners! And thank you to all the participants for your many comments. We were so excited to see how many people were interested in our Fundamentals of Digital Photography Course. To those who did not win, we wanted to let you know that for a limited time we are offering you the chance to save 20% on the NYIP Course of your choice. Learn more at www.nyip.edu. Simply use the code NY20 at sign-up. But don’t wait, because this offer is only available until November 8th EST – The NYIP Team”

  • Winners will be emailed with details of how to collect their prize by the team at NYIP.
  • Thanks to everyone for entering and to NYIP for yet again, sponsoring another wonderful competition.

Photo by NYIP Student Photographer, Finnur Tomasson

The winning comments:

By ETricco – This course seems to be just what I am looking for. I have dreams of getting into some sort of photography-related field (most often when the 3 1/2 walls of my cubicle feel like they’re closing in on me and I need to find a more fulfilling career ASAP), but how do you start?? They are probably pipe dreams, but I figure at the very least I would like to master the skills. I use manual settings all the time and end up with decent pictures, but they are the production of lots of shots and just testing out different settings to see what works. I want to move on from this try-and-see method to a more calculated, intent technique. Anyone can take a beautiful photo of something beautiful, but I want to gain the skills to take something ugly or ordinary and capture it in a beautiful frame- and to be able to do that consistently, knowing exactly how to go about it and why. I’ve been reading up on ISO and aperture and shutter speed and have a basic grasp of what they are and how they work together, but I can’t yet look at something and know what my settings should be. I think if I had the framework this course provides instead of the piecemeal learning I’ve been doing, pulling together tips and facts from different articles and forums I find, it would really pull everything together; moreover, I think I would also be a source of motivation, because I love learning but trying to teach myself on my own is often overwhelming and disheartening. Lastly, I love that this course can be done at my own pace, so it can fit into my already hectic life and I can really get the most out of it. Please pick me and rescue me from my Office Space nightmare!

By Felicia Giberson – NYIP to me is a place that cares about their students by helping them to become better photographers. Being able to be mentored by a professional photographer would be absolutely amazing. I never seem to be completely satisfied with my pictures and to be able to have a professional guide me and give me one on one feedback is priceless. I have been learning for over a year now and seem to have hit a roadblock in the way that my pictures are coming out. My focus, composition, and exposure always seem to be off and while I can fix exposure and composition in the computer I cannot fix the focus. I would be so excited to have someone be able to give me pointers to use so that I can correct this and other issues I am having. Watching videos online and reading articles only helps so much. I would love to have the chance to get that perfect final image in my photos that I see in my mind and I believe that the New York Institute of Photography can do that.

By SD Art Teacher – How could I use an NYIP course, oh let me count the ways…
First, I am a high school art teacher from a rural school in South Dakota. And I have been given a wonderful opportunity this spring to teach a photography class. (I have only been asking for this opportunity for about 10 years or so), but anyways, I have finally been granted my wish.

This brings me to my first problem. The last time I took a photography class we used this stuff called film and we had to edit, develop and process it in a room, called a “Darkroom” ironically. Hopefully these still exist, but no matter what, this is where I learned. Now not to make myself sound THAT old, I have owned a DSLR camera for about 10 years now. I just have never officially taken a class. I am very proud to be a self-taught photographer. But I think I am in over my head with this teaching photography thing.

NYIP could help me in so many ways because while I think I know composition, lighting and editing, I also know that I might NOT know everything. Usually this is hard for me to admit. But when it comes to photography, which is at the lower end of my knowledge pool, I would be grateful for any assistance I can get. I am especially interested in learning the editing phase of the class. I know enough about editing programs to basically be dangerous, but I am very nervous about teaching tips and tricks to high school students who are depending on me for every step of the process.

While I am nervous, I am also very excited to be teaching a photography class. I also think I am in a great position to not only use the knowledge I will learn from NYIP but to pass it on to future photographers who will learn the true art of photography. I hope to inspire them to find a passion in taking photos and learning to edit them so that they look like they have been created by professionals. My students might not become professional photographers but through my journey I hope to help them find their own adventure and love for photography. Who knows, they might even be inspired to pick up their own NYIP class in the future.

Thank you all again.

You can learn more about NYIP HERE

Disclaimer: NYIP is a paid partner of dPS.

The post The Winners of the Three NYIP Photography Courses Are . . . by Darlene Hildebrandt appeared first on Digital Photography School.


Digital Photography School

 
Comments Off on The Winners of the Three NYIP Photography Courses Are . . .

Posted in Photography

 

Watch Sony’s a7R III livestream event on DPReview

25 Oct

Sony dropped a bombshell at 2am Eastern time last night, announcing the 42.4MP mirrorless full-frame Sony a7R III to the world. And this morning, at a special event in New York City, they’ll officially ‘unveil’ this camera (and more) with all of the Apple-esque showmanship we’ve come to expect from Sony camera launches.

The ‘special livestream event’ starts in just a few minutes. Click play up top and open up the DPReview Twitter account in another page for live commentary from our lovable nerds at the event.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Watch Sony’s a7R III livestream event on DPReview

Posted in Uncategorized

 

DxO acquires Nik Collection from Google and will continue to offer it for free… for now

25 Oct

Look alive, Nik Collection fans: the software suite is back from the (mostly) dead. It will change hands from Google to DxO, who will continue to offer it as Photoshop and Lightroom plug-ins, as well as incorporate it into their own software. DxO will offer a new flagship application called PhotoLab, a version of OpticsPro that will incorporate Nik Collection’s U Point technology.

We spoke with Aravind Krishnaswamy, a Google Engineering Director, and DxO founder/CEO Jerome Meniere about the acquisition. Krishnaswamy mentioned Google’s need to focus on its Photos application, but that they want the Nik community to have a future, and a place to continue using the suite’s tools.

That’s where DxO picks things up. The Nik Collection in its present state will continue to be offered for free – for now. Meniere hints that this may not always be the case, and DxO plans to develop a new “Nik Collection 2018” for mid-next year. Meniere also mentions that they’d like to work with the Nik community to take the software in a direction that they’d like to see it go.

Not surprisingly, Nik-developed Snapseed is not included in the transaction, and will remain with Google. The company plans to continue actively developing and improving the mobile image editing app.

Head to DxO’s dedicated Nik Collection site if you’d like to snag free versions of the plug-ins while you still can.

Press release

DxO acquires Nik Collection assets from Google and plans to set a new bar on Photo editing softwares

PARIS – October 25, 2017 – DxO, one of the most innovative companies in consumer imaging, today announced the acquisition of the Nik Collection assets from Google.

DxO plans to continue development of the Nik Collection. The current version will remain available for free on DxO’s dedicated website, while a new “Nik Collection 2018 Edition” is planned for mid-next year.

“The Nik Collection gives photographers tools to create photos they absolutely love,” said Aravind Krishnaswamy, an Engineering Director with Google. “We’re thrilled to have DxO, a company dedicated to high-quality photography solutions, acquire and continue to develop it.”

“We are very excited to welcome the Nik Collection to the DxO family,” said Jérôme Ménière, CEO and founder of DxO. “DxO revolutionized the image processing market many times over the years with its innovative solutions, and we are convinced that we will continue to do so with Nik’s tools, which offer new creative opportunities for photographers. The latest version of our flagship software DxO PhotoLab, which is available as of now, is the first embodiment of this thrilling acquisition with built-in U point Technology.”

About the Nik Collection

The Nik Collection is composed of seven desktop plugins for Adobe Lightroom and Photoshop that provide a powerful range of photo editing capabilities — from filter applications that improve color correction, to retouching and creative effects, to image sharpening that brings out hidden details, to the ability to adjust the color and tonality of images. The current lineup of the Nik Collection includes:

  • Analog Efex Pro: Applies film-era camera, lens, and film simulations to digital images
  • Color Efex Pro: A comprehensive set of filters for color correction, retouching, and creative effects
  • Dfine: Noise reduction software for camera-specific digital images
  • HDR Efex Pro: Specialized program for processing HDR pictures
  • Sharpener Pro: Image sharpening for digital images
  • Silver Efex Pro: Black & White conversion of images with darkroom-inspired controls
  • Viveza: Selectively adjusts image color and tonality without complicated masks or selections

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on DxO acquires Nik Collection from Google and will continue to offer it for free… for now

Posted in Uncategorized

 

Sony a7R III promises faster bursts, better focusing and longer battery life

25 Oct

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_9128455414″,”galleryId”:”9128455414″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });

Sony has announced the a7R Mark III, a 42.4MP mirrorless camera built around the lessons learned from its flagship a9 sports camera. The result is a high-res full frame camera capable of 10 fps shooting with more tenacious autofocus and many of the improvements existing a7R II users had hoped for.

The camera features essentially the same body as the a7R II, but Sony has found room for a focus point selection joystick, AF-On button, twin SD card slots, flash sync socket and, most importantly, the higher-capacity battery of the a9. The new camera also gets the 3.69M-dot OLED viewfinder from the a9, providing a 1280 x 720 resolution view. This gives you highly detailed images with high contrast and deep blacks through the EVF, particularly during playback.

Speed

The sensor is the same 42.4MP BSI CMOS chip as before, but a series of hardware and processing changes act to get more out of it.

A faster ‘Bionz X’ processor, along with the front-end LSI processor featured in recent Sony models, allows the camera to process more data, faster. This, in conjunction with a redesigned, low-vibration shutter mechanism, allows the new camera to shoot at 10 frames per second, with full autofocus, in either mechanical or electronic shutter mode. It can also do a6500-style ‘live view’ continuous shooting at up to 8 fps. It’s not the blackout-free shooting of the a9, but the instantaneous ‘live’ frames at 8 fps can help you keep up with the action despite this being, in practice, simply 8 live frames per second with black frames inserted in between (if the behavior is anything like the a6500 we tested).

Sony says the faster processing will give “more tenacious” subject tracking and Eye-AF than the existing a7R models

Continuous shooting bursts can last for 87 compressed or 28 uncompressed Raw files.

Sony claims 15 stops of dynamic range and 14-bit Raw capture across more of its shooting modes (including continuous shooting and e-shutter mode, which prompted the previous camera to drop to 12-bit capture), though it still drops to 12-bit when shooting 10 fps uncompressed Raw. At the pixel-level, we’re skeptical of the 15 EV claim and expect something more along the lines of the ADC bit-depth: 14 to 14.5 EV at best.

So, although the Mark III doesn’t have the super-high throughput stacked CMOS design that we saw in the a9, Sony says the faster processing will give faster shooting speeds and even offer AF benefits: “more tenacious” subject tracking and Eye-AF than the existing a7R models to name a couple, even if not up to a9 standards. So how does AF stack up?

Autofocus

The a7R III retains the 399 point on-sensor phase-detect AF system of its predecessor, ensuring accurate and precise autofocus at the image sensor plane with no calibration whatsoever. Like with the a9, Sony has updated its low light AF rating, ensuring focus down to -3 EV with F2 lenses. Indeed, we’ve found Sony’s ratings to be relatively accurate, with a F1.4 lens offering 1 stop faster performance (down to -4 EV), but slower lenses offering worse performance (-1 EV for F4 lenses). The a7R II predecessor focused down to -3 EV with F1.4 lenses, and reliably to -2 EV with F2 lenses.

Importantly, though, Sony claims twice as good face and eye detection and tenacity. That would be welcome, as we found Eye AF-C to be very jumpy, readily hopping between detected faces in the scene, on the a7R II. The a7R II particularly struggled in continuous drive modes. The a9 remedied this issue quite a bit, more tenaciously sticking to your original intended subject as you can see below, and even functioning jaw-droppingly flawlessly even in 20 fps bursts. We hope the a7R II’s algorithms allow for at least somewhat similar behavior. See how the a7R II and the a9 compare, above.

Official Sony a7R III sample images

$ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_4337610895″,”galleryId”:”4337610895″,”isEmbeddedWidget”:true,”standalone”:false,”selectedImageIndex”:0,”startInCommentsView”:false,”isMobile”:false}) });

Stable high resolution

As well as the more powerful processors, the a7R Mark III gains some of its capabilities from a completely new shutter mechanism. This is designed to be both fast and low vibration, with a braking mechanism designed to reduce the risk of shutter shock, to maximize image sharpness (although for shutter speeds longer than 1/1000s, electronic front curtain makes this entire issue moot). Sony says it will offer professional levels of durability, too, though hasn’t put a number on its expected lifespan.

The camera’s IS mechanism also gets a boost with the 5-axis system upgraded to receive a 5.5 step rating, by CIPA standard testing. The full capabilities of the system remain available in video shooting, too, though we would’ve liked to see the option for additional electronic (‘digital’) stabilization for glide-cam like footage as well, as is offered on the RX100-series of cameras and some smartphones today.

10 fps high-resolution shooting, with flash

A potentially huge benefit of the 10 fps mechanical shutter is 10 frames-per-second shooting with flash, assuming your strobes can keep up. That puts the a7R III ahead of even the a9 in this respect. This is another example of Sony not afraid to cannibalize itself: it’s offering technology advanced compared to its flagship, at a lower model-level.

For some users, like strobe dance photographers, this may be an immensely important consideration.

Ergonomics

Although the body is essentially that of the a7R II, the Mark II gains some of the ergonomic improvements of the a9. This includes an AF-On button and joystick/multi-controller for positioning the camera’s AF point. The camera’s 3″ touchscreen can also be used as an ‘AF touchpad’ when the camera is held to your eye.

The touchscreen can also be used to perform a controlled rack focus during video capture. Perhaps most importantly, the a7R III gains the new menu system of the a9, including the button customization of that model.

Video

As with its predecessor, the a7R Mark III can shoot UHD 4K from the full width of its sensor but gets better results in Super 35 (essentially APS-C) crop mode. In crop mode the camera shoots using a 5176 x 2924 pixel region, which it down-samples to produce highly detailed 3840 x 2160 UHD 4K footage. Sony says the image quality of both types of footage is improved but that the quality differential between full frame and Super 35mm modes will remain. In other words, Super 35 will continue to (ironically) offer higher resolution, better dynamic range and low light performance than full-frame mode in 4K.

The a7R III gains the Hybrid Log Gamma feature we first saw in the Panasonic GH5, which essentially captures Log footage along with metadata that allows HLG-compatible HDR displays to correctly present the footage, without the need for post-processing. Display Assist, which gives a ‘normal,’ corrected preview while shooting in Log mode, is available when shooting HLG footage. SLog-3 has also been added to maximize dynamic range for users who do expect to grade their footage.

What’s this ultimately mean to you? You’ll be able to immediately capture high contrast footage while preserving both highlight and shadow detail, and then display this wide range of tones on a HDR display without needing to ‘flatten’ the output to fit into the display range of traditional monitors. It’s all the benefits of HDR without all the flat-looking downsides of traditional HDR approaches.

In crop mode the camera shoots using a 5176 x 2924 pixel region, which it down-samples to produce highly detailed 3840 x 2160 UHD 4K footage

The a7R III also gains the 1080p120 (100 in PAL mode) video capability that Sony has developed since the launch of the Mark II, along with the fast and slow-motion modes that stem from the feature. It also shoots XAVC-S Proxy, with the camera capturing both a high quality and a small, more easily editable proxy stream, simultaneously (a feature we first saw on the RX10 IV).

Multi-shot resolution mode

New to the a7R III is a multi-shot resolution mode that, much like the system in recent Pentax DSLRs, shoots four images and moves the sensor between each shot, so that each pixel position in the final image is captured with a red, a blue and two green pixels. This cancels out the side-effects of the Bayer color filter array, meaning that full color information is captured for every pixel. This has a noise benefit both from capturing multiple shots of the same scene, which helps average out the noise, while also reducing the additional softness and noise that usually comes from the demosaicing process.

However, unlike the system Pentax uses or the earlier, 8-shot process used by Olympus, the a7R III cannot assemble the final images in-camera. Instead four Raw files must be processed using a freely downloadable image processing application for PCs that Sony will offer. The camera must also wait either 0.5, 1, or 2 seconds between shots for the sensor to settle, which is likely to exacerbate the problems of subject movement between the first and last shot.

Other features

As well as all these there are a series of smaller additions. For a start, the a7R III also gains an anti-flicker mode that monitors the strobing of artificial lights and shoots at the peak intensity, to avoid dark or inconsistently exposed photos. Unfortunately though, since sensor readout speeds aren’t improved, we’re not expecting any decrease in banding during full-silent shooting (e-shutter) under artificial lighting.

There are also twin USB sockets, a USB 3.1 type C connector and the microUSB port that is found on most cameras. The a7R III can be operated when charging over either of these sockets, meaning the camera can charge over a microUSB cable while also shooting tethered via USB-C.

As per the a9, the a7R Mark III has twin card slots, one of which is UHS-II compatible, while the other is the lower-bandwidth UHS-I standard.

Battery life

Use of the larger NP-FZ100 battery increases the battery life by 2.2x, meaning a CIPA rating of 650 shots per charge when using the rear LCD or 530 shots per charge with the EVF. This can be increased another two-fold (or 4.4x extra life) using the optional VG-3EM battery grip, which it shares with the a9. We’re eager to see how Sony fit this larger battery into a similar body size, as it’s nothing short of impressive.

The a7R Mark III will be available from the last day of November at a recommended selling price of $ 3199.

Press release

Sony’s New Full-frame ?7R III Interchangeable Lens Camera Delivers the Ultimate Combination of Resolution and Speed

Innovative Full-frame Mirrorless Model Offers 42.4 MP High-Resolution, 10 fps Continuous Shooting, Fast and Precise AF Performance in a Compact Body

  • 35mm Full-Frame 42.4 MP1 Back-Illuminated Exmor R™ CMOS Image Sensor with Evolved Image Processing
  • Continuous Shooting at up to 10 fps2 with either Silent Shooting or Mechanical Shutter and full Auto Focus/Auto Exposure tracking
  • 399 phase-detection AF points covering 68%3 of image area, 425 contrast AF points and approximately 2 times more effective Eye AF4
  • 5-axis optical in-body image stabilization with a 5.5 step5shutter speed advantage
  • High Resolution 4K6 Movie Shooting with full pixel readout and no pixel binning7
  • Completely redesigned for professionals, including upgraded Auto Focus, Dual SD Card Slots, Extended Battery Life, SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ Terminal and more
  • Compact, Lightweight body at only 23 oz8

NEW YORK, Oct. 25, 2017 – Sony Electronics, a worldwide leader in digital imaging and the world’s largest image sensor manufacturer, has today introduced an impressive addition to their full-frame mirrorless camera lineup, the ?7R III (model ILCE-7RM3).

Thanks to an evolutionary leap in image processing power and efficiency, the new ?7R III combines a high-resolution 42.4 MP1 back-illuminated Exmor R CMOS image sensor with impressive shooting speeds at up to 10 fps2 with full AF/AE tracking, as well as beautiful image and 4K6 video quality, wide 15-stop9 dynamic range, high sensitivity with noise reduction of almost a full stop4 and more. With these immense capabilities and a compact, lightweight body, it’s an extremely versatile tool for photographers, videographers, multi-media creators and all other types of professionals that demand reliability, flexibility and versatility.

“We’re continuing to raise the bar for innovation in the imaging marketplace, in particular with our full-frame camera lineup,” said Neal Manowitz, Vice President of Digital Imaging for Sony Electronics. “As an industry, we are now entering the true digital age of imaging. The capabilities of the ?7R III camera – silent shooting at 10 fps at full 42.4 MP resolution, extreme AF coverage and speed for both video and stills – exceed anything that is physically possible with a DSLR, making it an excellent symbol for this paradigm shift” He added, “It offers a level of customization, speed and stamina that will satisfy even the most demanding professionals, and ensures that they can take full advantage of this impressive tool to capture and create in ways they never could before.”

A New Level of Image Quality
The 42.4MP high-resolution, back-illuminated Exmor R CMOS image sensor utilizes a gapless on-chip lens design and AR (anti-reflective) coating on the surface of the sensor’s seal glass to dramatically improve light collection efficiency, resulting in high sensitivity with low-noise performance and wide dynamic range.

Sony’s new ?7R III also features a new front-end LSI that effectively doubles4 the readout speed of the image sensor, as well as an updated BIONZ X™ processing-engine that boosts processing speed by approximately 1.8 times compared to the ?7R II. These powerful components work together to allow the camera to shoot at faster speeds while also enabling its impressive ISO range of 100 – 32000 (expandable to ISO 50 – 102400 for still images) and massive 15-stop9 dynamic range at low sensitivity settings. This ensures outstanding overall performance at all settings and in all shooting conditions.

This new full-frame model was built without an optical low pass filter to maximize resolution, while also having the ability to output 14 bit RAW format even when shooting in silent or continuous mode. The camera is equipped with an innovative 5-axis optical image stabilization system that has been fine-tuned to support its high-resolution shooting capacity, resulting in a 5.5 step5 shutter speed advantage, the world’s highest10 compensation performance for an image stabilization system. There is also a new low-vibration shutter that reduces vibration and image blur in all modes, including the high speed 10 fps shooting, as well as several advancements in accurate color reproductions of skin tones.

High-Performance AF and AF/AE Tracking at up to 10 fps2
The innovative new ?7R III full-frame mirrorless camera is equipped with a refined image processing system that allows it to shoot full 42.4MP images at up to 10 fps with continuous, accurate AF/AE tracking for up to 76 JPEG / RAW images or 28 uncompressed RAW images11. This high speed 10 fps mode is available with either a mechanical shutter or a completely silent shooting12, adding to the immense flexibility of the camera. The camera can also shoot continuously at up to 8 fps13 in live view mode with minimal lag in the viewfinder or LCD screen. These high speed options ensure that fast moving subjects can be captured with extreme accuracy and incredible image detail.

For added convenience, while large groups of burst images are being written to the memory card, many of the cameras key functions are operable, including access to the ‘Fn’ (Function) and ‘Menu’ buttons, image playback and several other menus and parameters14 including image rating and other functions that facilitate on-location image sorting.

Additionally, if there is fluorescent or artificial lighting present in a shooting environment, users can activate the Anti-flicker15 function to allow the ?7R III to automatically detect frequency of the lighting and time the shutter to minimize its effect on images being captured. This minimizes any exposure or color anomalies that can sometimes occur at the top and bottom of images shot at high shutter speeds.

The upgraded focusing system of the ?7R III is comprised of 399 focal-plane phase-detection AF points that cover approximately 68% of the image area in both the horizontal and vertical directions. There is also 425 contrast AF points, an increase of 400 points compared to the ?7R II. This advanced system delivers AF acquisition in about half the time as the ?7R II in low-light conditions, with tracking that is approximately 2 times more accurate as well. The acclaimed Eye AF feature is also approximately 2 times more effective, and is available when utilizing Sony’s A-mount lenses with an adapter16.

Additional improvements in focusing flexibility include AF availability in Focus Magnifier mode, focal-plane phase-detection AF support when using A-mount lenses17, an ‘AF On’ button, a multi-selector or ‘joystick’ for moving focusing points quickly, flexible touch focus functionality and much more.

High Quality 4K for the Video Professionals
The new ?7R III is exceptionally capable as a video camera, offering 4K (3840×2160 pixels) video recording across the full width of the full-frame image sensor. When shooting in Super 35mm format, the camera uses full pixel readout without pixel binning to collect 5K18 of information, oversampling it to produce high quality 4K footage with exceptional detail and depth.

A new HLG (Hybrid Log-Gamma) 19 is available on the ?7R III that supports an Instant HDR workflow, allowing HDR (HLG) compatible TV’s to playback beautiful, true-to-life 4K HDR imagery. Further, both S-Log2 and S-Log3 are available for increased color grading flexibility. The camera can also record Full HD at 120 fps at up to 100 Mbps6, allowing footage to be reviewed and eventually edited into 4x or 5x slow motion20 video files in Full HD resolution with AF tracking.

Build, Design and Customization for Professionals
Sony’s newest full-frame camera is equipped with a variety of enhanced capabilities that give it a true professional operational style. These include dual media slots, with support in one slot for UHS-II type SD memory cards. Users have a variety of options for storing their content, including separate JPEG / RAW recording, separate still image / movie recording, relay recording and more. Battery life has been greatly extended as well, as the new camera utilizes Sony’s Z series battery that have approximately 2.2 times the capacity of the W series battery utilized in the ?7R II.

The ?7R III features an upgraded high-resolution, high-luminance Quad-VGA OLED Tru-Finder™ with approximately 3,686k dots for extremely accurate, true-to-life detail reproduction. The Tru-Finder, also found in the acclaimed Sony ?9 camera, utilizes a ZEISS® T* Coating to greatly reduce reflections, and has a fluorine coating on the outer lens that repels dirt. It also has a customizable frame rate, with options of either 60 fps or 120 fps21 to best match the action. The LCD screen has been upgraded as well, with a resolution of 1.44M dots and WhiteMagic™ technology that improves viewing in bright, outdoor conditions. “Standard” or “High” display quality settings are also available for both the viewfinder and monitor as well. “High” takes advantage of the large amount of data read from the 42.4MP sensor to provide extra fine viewfinder and monitor displays for a more natural view. The new camera also offers a multi-selector joystick that provides a fast, efficient way to shift focus points, as well as an ‘AF ON’ button to activate autofocus when shooting stills or movies.

The new ?7R III allows for convenient transfer of files to a smartphone, tablet, computer or FTP server via Wi-Fi®, while also including a sync terminal, enabling external flash units and cables to be connected directly for convenient flash sync. A SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ Terminal is also available for increased flexibility in power supply or connected accessories, as well as a faster image transfer speed when connected to a PC.

New “Imaging Edge” Software Suite and Pixel Shift Multi Shooting Mode
New with the ?7R III is a software suite called “Imaging Edge” that extends the creative capabilities of the entire shooting process – from pre-processing to post-processing. “Imaging Edge” provides three PC applications called ‘Remote’, ‘Viewer’ and ‘Edit’, available for free download, which support live-view PC remote shooting and RAW development.

Also making its debut on the versatile ?7R III is a new Pixel Shift Multi Shooting mode, which takes full advantage of the advanced 5-axis optical in-body stabilization to create beautiful true-to-life, super-high resolution composite images. In this mode, the camera precisely shifts the sensor in 1-pixel increments to capture four separate pixel-shifted images containing a total of approximately 169.6 MP22 of image data. These four images can be composited together and processed utilizing the new “Imaging Edge” software suite. This ultimately results in a still image with overwhelming resolution and an unprecedented level of color accuracy, and is ideal for photographing architecture, art or any other still life photography subject with many intricate details and colors.

Pricing and Availability
The Sony ?7R III Full-frame Interchangeable Lens Camera will ship this November for about $ 3,200 US and $ 4,000 CA. It will be sold at a variety of Sony authorized dealers throughout North America.

A variety of exclusive stories and exciting new content shot with the new ?7R III camera and other Sony ? products can be found at www.alphauniverse.com, a site built to educate and inspire all fans and customers of the Sony ? brand.

The new content will also be posted directly at the Sony Photo Gallery and the Sony Camera Channel on YouTube. Detailed information pages within Sony.com for the new products can be found at:
· (US) – ?7R III Full-frame Interchangeable Lens Camera
· (CA) – ?7R III Full-frame Interchangeable Lens Camera

1. Approximately, effective
2. Up to 10 fps in continuous “Hi+” mode, and up to 8 fps in continuous “Hi” mode. Maximum fps will depend on camera settings
3. Approximately 68% of the image area in both the horizontal and vertical directions
4. Compared to the a7R II, according to Sony testing
5. CIPA standards. Pitch/yaw shake only. Planar T* FE 50mm F1.4 ZA lens. Long exposure NR off
6. A Class 10 or higher SDHC/SDXC memory card is required for XAVC S format movie recording. UHS speed class 3 or higher is required for 100 Mbps recording
7. In Super 35mm mode.
8. Approximately
9. Sony test conditions for still images
10. Among digital cameras with a full-frame image sensor. As of October 2017 press release, based on Sony research
11. “Hi+” continuous mode with UHS-II compatible SDXC memory card. Sony test conditions.
12. Some distortion may occur with fast-moving subjects of if the camera is moved sideways rapidly
13. “Hi” mode. Maximum fps will depend on camera setting.
14. Not all menu parameters can be edited while data is being written to the memory card
15. Only 100 Hz and 120 Hz flicker is detected. Continuous shooting speed may decrease. Flicker-free shooting is not available during silent shooting, BULB exposure, or movie recording
16. With SSM or SAM lenses only. Eye AF not supported for movie recording. AF-C can only be used when the “Phase detection” AF system is selected, but focus is fixed at the first frame during continuous shooting in any mode other than “Continuous: Lo” (Hi+, Hi, Mid).
17. With SSM or SAM lenses only. With the LA-EA3 mount adapter. Focal plane phase-detection AF not supported for movie recording. AF-C can only be used when the “Phase detection” AF system is selected, but focus is fixed at the first frame during continuous shooting in any mode other than “Continuous: Lo” (Hi+, Hi, Mid).
18. 15-megapixel
19. Connect this product to an HDR (HLG) compatible Sony TV via a USB cable when displaying HDR (HLG) movies
20. Sound not recorded. Class 10 or higher SDHC/SDXC memory card required
21. In NTSC. 50fps or 100fps in PAL
22. Image size after compositing is approx. 42.4 million (7952 x 5304) pixels.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Sony a7R III promises faster bursts, better focusing and longer battery life

Posted in Uncategorized

 

Choosing the Correct ND Filter for Your Desired Long Exposure Photography Effects

25 Oct

Long exposure photography has quickly grown to become one of my favorite styles of photography and it’s quite clear by looking through the images I’ve captured the last few years. More and more images use a shutter speed slower than half a second and it’s further between the handheld shots.

Which ND Filter to use?

One of the reasons I’ve grown to become such a big fan of long exposure photography is that it opens so many doors. You’re much less limited in your work and you have endless of options when it comes to how you want your image to look. However, it’s exactly this benefit which also becomes a challenge for many: how do you choose the right shutter speed and ND Filter? 

Choosing the Correct ND Filter for Long Exposure Photography Effects

I don’t believe that there’s one correct shutter speed or filter when it comes to landscape photography. A big part of the creative process is to do what you prefer and go for the look you want to achieve. However, if you want to be able to achieve the look you want, you’ll also need to know how to get there and that’s why it’s important to understand how each of the different ND filters will affect your image.

In this article, we’ll look at how each of three different (three, six and 10-stop) ND filters will affect your image and in what scenarios they are each most beneficial.

3-Stop ND Filter

If you’re familiar with Neutral Density filters you may already know that a 3-stop filter won’t have a huge impact during brighter hours. Compared to the six and 10-stop filters, the 3-stop is not particularly dark and it won’t allow you to use those extremely slow shutter speeds of several minutes.

That being said, the 3sStop ND Filter remains one of my personal favorites. I particularly enjoy working with it when photographing waves from a low perspective.

Choosing the Correct ND Filter for Long Exposure Photography Effects

The picture above was taken a couple hours after sunrise but due to the sun’s low position on the Arctic sky, it still wasn’t daytime-bright outside. However, without using a filter, the shutter speed would have been too quick to capture the motion I wanted in the water. So I knew that a 3-stop ND filter would do the job. Using it allowed me to lengthen the exposure time to 1/3rd of a second, which was just enough the get some motion in the rushing waves and to achieve the look that I wanted for this shot.

Had I used a 6-stop ND filter instead, the image would look quite different since the longer shutter speed would blur the water and lose the texture that I was aiming for.

6-Stop ND Filter

As the name indicates, a 6-stop ND filter lets you lengthen the exposure time by six stops (not six times – six stops is 2x2x2x2x2x2 = 64 times). If you’re already using a relatively slow shutter speed due to the sun’s low position in the sky, this means that you can achieve a very slow shutter speed when using this filter.

Choosing the Correct ND Filter for Long Exposure Photography Effects

For the image above, I used a 6-stop ND filter to blur the water and create an overall softer feel to the scene. Using the filter allowed me to lengthen the exposure time to 15 seconds, which was just enough to blur the water and create some motion in the sky. As you can see, however, the iceberg in the foreground is already blurring out when using a 15-second shutter speed.

Had I instead used a 10-stop ND filter and an exposure time of a few minutes, all the ice would be blurry due to them constantly moving. On the other hand, a 3-stop ND filter wouldn’t have allowed me to slow down the shutter speed enough to blur the water and I wouldn’t be able to achieve the look I wanted.

10-Stop ND Filter

The 10-stop ND filter is perhaps the most popular filter for many who are just getting started with long exposure photography. The effect is extremely visible and the images created with it can grab attention right away. Even though there are darker filters available (such as a 16 and 20-stop), the 10-stop filter is often what people think of when talking about long exposure photography.

Choosing the Correct ND Filter for Long Exposure Photography Effects

The image above is a typical example of how a 10-stop ND filter can create a surreal look to the image. With the filter placed in front of my lens, I was able to use a shutter speed of four minutes to completely blur the lake and get a soft, dramatic look in the sky as the clouds were dragged out.

While it does require some more planning and patience than the other two filters, it is also the one that has the biggest visual impact straight out of the camera.

Choosing the Right One

As I mentioned earlier in this article, there isn’t necessarily one correct filter that you should use. Instead, you should be aware of how the different filters will affect your image and then choose the one which will get you closest to your envisioned image.

Choosing the Correct ND Filter for Long Exposure Photography Effects

Conclusion

Long exposure photography opens many doors and gives you several new creative elements to work with. As with anything else, a big part of this technique is trial and error but as you continue learning you’ll also begin seeing what you need to do in order to capture the images you want.


If you want to learn more about Long Exposure Photography I’ve shared everything I know in my eBook The Ultimate Guide to Long Exposure Photography. This eBook is for those who are ready to take their images to the next level and expand their creative vision.

The post Choosing the Correct ND Filter for Your Desired Long Exposure Photography Effects by Christian Hoiberg appeared first on Digital Photography School.


Digital Photography School

 
Comments Off on Choosing the Correct ND Filter for Your Desired Long Exposure Photography Effects

Posted in Photography

 

Adobe Scribbler uses AI to colorize black-and-white portraits and sketches

25 Oct

At the Adobe MAX 2017 conference last week, the engineers at Adobe Research showed off a deep learning system called Project Scribbler that can transform a line sketch or black-and-white portrait into a fully colorized and realistic image. The technology utilizes Adobe Sensei artificial intelligence technology to generate a realistic color image based on a partially-colored sketch created by the user.

As with all of their “Sneaks” at Adobe MAX, Adobe describes this as an early technology, teasing that it “may or may not” become a future product or feature in an existing product like Photoshop.

In a description posted on the Adobe Research website, researchers explain that existing deep convolutional networks are able to generate realistic images, but that users have little control over what the final images look like. This makes the technology “of limited utility,” according to the researchers, a reality not shared by their Scribbler network.

Unlike the aforementioned deep convolutional networks, Scribbler gives users a great deal of control over the final image it generates. This is made possible by feeding Scribbler a sketch where the lines serve as boundaries for the final image. As well, users are able to control how Scribbler colorizes the image by applying “sparse color strokes” to the sketch. These color strokes serve as a guideline so that Scribbler knows what colors to use for each part of the sketch.

Scribbler is capable of realistically coloring sketches and black-and-white photos without the aid of user-created color strokes, though, as demonstrated by Adobe researcher Jingwan Lu in the video above.

Scribbler was also demonstrated as capable of realistically applying existing textures to a sketch. To do this, the user places a texture over the part of the sketch where the desired texture should be applied. And, of course, Scribbler can apply more than one texture to different parts of the same sketch.

A product or feature based on Project Scribbler could prove useful in a variety of ways. Photographers, for example, could use this technology to rapidly colorize a black-and-white photo. Similarly, an artist could use Scribbler to flesh out a quick sketch of a planned art piece, enabling the artist or their client to see a representation of the final artwork before time is invested in creating it.

The full paper detailing the Scribbler colorizing technology is available here, the paper about Scribbler’s texture control technology is available here, and, of course, you should definitely check out the demo at the top.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Adobe Scribbler uses AI to colorize black-and-white portraits and sketches

Posted in Uncategorized

 

Fujifilm announces square-format Instax Share SP-3 SQ photo printer

25 Oct

Fujifilm has announced its first square-format standalone printer, the Instax Share SP-3 SQ. The SP-3 can crank out a 318 dpi photo in just 13 seconds and has a battery that will last for about 160 prints. The updated Share app includes templates for creating collages, magazine covers and CD jackets. Users can also search for hashtags on Instagram to select photos they wish to print. In addition to the Share app, photos can also be printed directly from Fujifilm’s X-series cameras.

You can pick up the Instax Share SP-3 SQ next month, in your choice of white or black, for $ 199.

NEXT GENERATION INSTAX SHARE™ SP-3 SQ PRINTER ARRIVES IN SQUARE FORMAT

Newly designed smartphone printer provides high quality images in square format; improved app offers new features for greater artistic expression

Valhalla, N.Y., October 24, 2017FUJIFILM North America Corporation is excited to announce the new INSTAX SHARE™ SP-3 SQ printer, the latest line in the instax SHARE series of printers that can print photos taken with a smartphone on INSTAX SQUARE film. The SP-3 is an expansion of the INSTAX product line to give users even more ways to get creative with their instant pictures that can be shared in an instant, both in-person and online with #myinstax.

Square Format Provides More Artistic Potential

The square format has been widely popular among smartphone users. With a 1:1 aspect ratio, this format is an effective artistic style and a long-standing favorite among photography lovers. Recent years have seen a rise in the sharing of square photos on social media platforms, such as Instagram, with users putting great care into every step of the process, from composition to editing and processing. With the SP-3, users can print beautiful, high quality square images in just 13 seconds to be used in DIY crafts, to decorate with or to give as a gift.

Updated SHARE App Allows for Greater Creativity

The new and improved SHARE app comes with additional features, making every step easier and more fun. Users can print up to 9 photos on one sheet using the “Collage Template”, a feature enabled by the square format of the SP-3, or use “My Template” to add text to printed photos. “My Template” comes with 11 templates ranging from magazine covers to CD jackets. Users can also adjust the color and size of text. The end result is a stylish print that users will be proud to display and share. Additionally, the app’s display screens have been designed to make the entire process easy for novice users. The app can be downloaded from Google Play on Android devices or from the App Store on iPhones free of charge.

“Hashtag Print” Feature

In addition to Instagram and Facebook, the app is compatible with Dropbox, Google Photos and Flickr. Through the “Hashtag Print” option, users can access Instagram directly through the app and select images under a chosen hashtag. This function makes it easy for users to find the photos they want and print them with ease, perfect for printing a collection of photos from any event where guests use a hashtag, like a wedding or party.

Sleek Design

The SP-3 comes in white or black with a sleek, sophisticated look. The printer is also compact and lightweight with a sharp, multi-sided structure. The SP-3 is suitable in a wide range of situations.

This product is the latest in Fujifilm’s ongoing plan to share the inherent joy of taking, printing, displaying and sharing photos to expand the world of the instax instant photo system, allowing users to enjoy instant photos by printing photos that they have taken with their smartphone.

Instax SHARE SP-3 Key Features:

  • Available in White and Black body colors.
  • Create instax photos by printing images from iPhones and Android phones via the instax SHARE app.
  • Printing is also compatible directly from X Series digital cameras to the SP-3.
  • High-resolution images with print pixels of 800 x 800 dots and 318 dpi to show detailed gradations and facial expressions of a full-length portrait, character or objects clearly.
  • Printing time of just 13 seconds.
  • Printing capacity of up to 160 prints per battery charge.
  • Comes with image Intelligence, proprietary image processing technology that automatically sets the optimum brightness during printing.
  • New Templates added to the instax SHARE app:
    1. My Template – A template function where users can add text as desired and adjust the text color, size and darkness by moving sliders left and right, broadening the range of photo styles available to them.
    2. Collage Template – A template function allowing users to print 2-9 photos together on one sheet to print a collection of memories from a special day or to tie together photos with a particular theme.
    3. Split Template – Transform one picture into multiple instax photos. This allows all kinds of unique photo styles, such as dividing a beautiful landscape across two instax photos to make one big print.
    4. SNS Template – Template for printing images that were uploaded to a social networking service (SNS). This social media-linked printing feature allows users to include their profile photo or number of likes in the photo.
    5. Real Time Template – When the “Real Time Template” is selected and a photo is taken, the date, place, weather, temperature, and humidity are indicated in the frame, making it great for travel photos or watching your child grow.

Availability and Pricing

The new INSTAX SHARE SP-3 SQ will be available in November 2017 for USD $ 199.95 and CAD $ 249.99. Instax SQUARE film is sold separately for USD $ 16.99 and CAD $ 15.99.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm announces square-format Instax Share SP-3 SQ photo printer

Posted in Uncategorized

 

The Phottix Juno is a fully-manual transceiver flash that works with all major brands

25 Oct

Phottix has announced a new fully-manual speedlight that is compatible with all major camera brands, and also features the company’s radio control system so it can operate as commander or slave in a group of other flashes.

The Juno has a maximum guide number of 58m/190ft at the longest end of its zoom head and offers power settings of 1/128th to full power in 1/3EV steps across eight stops. As the gun is fully-manual, it only needs a basic connection to the camera to trigger, so it is compatible with almost all camera models that feature a hotshoe.

In addition, Phottix has built its 2.4GHz Ares ll system into the Juno flash unit so it can work with up to four groups of flashes across 16 channels, and can be triggered by both Ares and Strato wireless controllers, as well as by other flashes and certain Sekonic light meters. Juno also features optical slave sensors to ensure it works with older and non-radio systems, and offers a thread on its side for mounting it in the horizontal position.

Phottix says its radio system operates over 100m and full power recycling takes about five seconds.

The Phottix Juno is powered by four AA batteries or an external battery pack, and costs $ 130. For more information, visit the Phottix website or watch the introductory video below:

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on The Phottix Juno is a fully-manual transceiver flash that works with all major brands

Posted in Uncategorized

 

Hasselblad X1D and H6D firmware update adds Touchpad AF and more

25 Oct

Hasselblad has released firmware update 1.19 for the X1D and H6D, adding new support and settings to the systems, as well as custom buttons and the ability to create a new folder. Notably, the firmware update brings support for V System lenses via the CF Adapter for the H6D, and it makes the X1D overall “more user friendly and customizable” by adding features like Touch-pad selection of the AF point.

You can read the changelogs for both firmware updates below.

X1D Firmware Update

The update for the X1D-50c includes the following new features:

  • Touch-pad selection of AF point
  • New setting: Live view in EVF only
  • Custom buttons
  • New setting: Max aperture (Lens bokeh)
  • Create new folder
  • Toggle overlay in Video Live View with display button

H6D-Firmware Update

The update for the H6D-50c & H6D-100c includes the following new features:

  • Support for CF adapter
  • Grip button lock
  • Custom buttons (more functions)
  • Create new folder
  • Toggle overlay in Video Live View with display button

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Hasselblad X1D and H6D firmware update adds Touchpad AF and more

Posted in Uncategorized