RSS
 

Archive for the ‘Uncategorized’ Category

Xiaomi unveils Mi 6X with dual-camera and AI-powered scene detection

25 Apr

Dual-camera equipped devices have really been taking off this year, and with the Mi 6X, Chinese manufacturer Xiaomi has just thrown its hat into the dual-cam ring as well. As has been the norm with virtually all recent device launches, Xiaomi is putting a lot of emphasis on the Mi 6X camera capabilities: claiming the new model competes with rivals such as the iPhone X or OPPO R15 in the imaging department.

We’ll have to get hands on a test unit to confirm if that’s true, but the camera specs do look promising. The main camera uses a 1/2.9″12 MP Sony IMX486 sensor and F1.75 aperture lens. The secondary camera comes with a 1/2.78″ 20MP sensor and the same lens specifications as the main camera. Xiaomi says the secondary camera uses a 4-to-1 pixel binning mode for reduced noise levels. It is also deployed to generate a fake-bokeh portrait mode.

The front camera uses the same Sony IMX376 sensor as the secondary unit, which should ensure image quality that is a cut above your average small-sensor front camera.

It’s not all about hardware, though. Like some other recent high-end devices, the Mi 6X uses artificial intelligence to detect more than 200 scene types and adjust camera settings automatically—including 12 different portrait scenes. According to Xiaomi, the AI algorithms are capable of learning, providing better detail and subject separation in portrait mode the longer you use it.

Non-camera specifications include a Qualcomm Snapdragon 660 chipset, 4/64 GB, 6/64 GB, and 6/128 GB memory combinations and a 5.99-inch LCD display with Full HD+ resolution. Security is covered with a fingerprint reader on the back and Face Unlock support.

Pricing is in line with Xiaomi’s tagline: “the same specifications, at half the price.” In China, prices start from CNY 1,599 (approximately $ 250 USD) which, considering the specifications, makes the Mi 6X an enticing option. The global version of the device will likely be called Mi A2 but no international pricing information has been provided yet.

More information, including some camera samples, is available on the Xiaomi website.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Xiaomi unveils Mi 6X with dual-camera and AI-powered scene detection

Posted in Uncategorized

 

This Lamborghini is ‘the world’s fastest purpose-built camera car’

25 Apr

A post shared by Nathan Garofalos (@nathangarofalos) on

If you like fast cars and expensive camera gear, look no further. What you see above is a Lamborghini Huracan with a $ 500,000 dollar camera gimbal attached to the front—a machine its creators have dubbed “the world’s fastest purpose-built camera car.”

Created by Incline Dynamic Outlet (IDO), a California-based company that usually specializes in aerial camera rigs, the so-called Huracam was built over the course of ‘many months.’

The frame for this elaborate setup is a $ 200,000 Lamborghini Huracan. Attached to the inside of the hood of said Huracan is a half-a-million dollar camera gimbal setup created by Gyro-Stabilized Systems (GSS) and fabricated to fit the vehicle by IDO. Inside the gimbal is a RED Helium 8K camera with the option to mount multiple lenses—a fittingly expensive camera for an unbelievably expensive camera car.

If you’re wondering how IDO was able to mount the gimbal inside the hood of the Lamborghini, it’s because the Huracan is a mid-engine vehicle. This means the massive 610-horsepower V10 engine sits towards the rear of the car, centered behind the driver and passenger seats, effectively turning the hood of the car into a trunk.

Unmodified, the Lamborghini Huracan has a zero-to-60 speed of 3.2 seconds and a top speed of more than 200 miles per hour. We don’t have the specs on how well it performs with the massive camera attached to the front, but it’s safe to say there’s a slight sacrifice in speed and acceleration.

Below is a gallery of Instagram posts showing off the Huracam in all its glory:

A post shared by The Huracam (@thehuracam) on

A post shared by The Huracam (@thehuracam) on

A post shared by The Huracam (@thehuracam) on

A post shared by The Huracam (@thehuracam) on

A post shared by The Huracam (@thehuracam) on

A post shared by ArmedBandit Media (@armedbandit) on

A post shared by Trevor Thompson (@trevorfromwherever) on

There’s no video captured with the 8K setup yet, but the first snippets shouldn’t be too far away. The team has already partnered up with Sharp Electronics for the first project with the Huracam.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on This Lamborghini is ‘the world’s fastest purpose-built camera car’

Posted in Uncategorized

 

Here’s how to create a super resolution photo with any camera

25 Apr
This is a super resolution image, creating by combining four photos in Photoshop.

We recently tested out the Pentax K-1 II’s new hand-held Pixel Shift mode which combines four images to create a ‘super resolution’ file in-camera with better detail, dynamic range and lower noise. Sadly, it also results in some unwanted processing artifacts.

But you can also create a super resolution photo without using Dynamic Pixel Shift by shooting a series of handheld images and combining them in Photoshop. Super resolution works essentially by sampling a scene multiple times with slight shifts in framing, which allows details to be localized with sub-pixel precision (since shifts are unlikely to be perfect multiples of one pixel). The result is a file with improved resolution, less noise, more dynamic range but no artifacts. The best part is you can do this with the camera of your choosing. For the sake of this example, we did it with the Pentax K-1 II.

$ (document).ready(function() { ImageComparisonWidget({“containerId”:”reviewImageComparisonWidget-10980295″,”widgetId”:603,”initialStateId”:null}) })

Following a simple step-by-step Photoshop recipe (listed below), we created a super resolution file stacking four images – the same number used by Dynamic Pixel Shift – and one stacking 20 images, just for fun. We down-sampled the files to the original resolution (36MP). Right off the bat, the difference between our four image stack and a standalone Raw file is like night and day.

Similarly, the difference$ (document).ready(function() { $ (“#icl-4014–1567822084”).click(function() { ImageComparisonWidgetLink(4014); }); }) between our 4 image stack and Dynamic Pixel Shift mode is also substantial. Areas where Dynamic Pixel Shift displays artifacts$ (document).ready(function() { $ (“#icl-4010-939092746”).click(function() { ImageComparisonWidgetLink(4010); }); }) look clean in our 4-stack. This is observable throughout our sample scene$ (document).ready(function() { $ (“#icl-4011–1901282620”).click(function() { ImageComparisonWidgetLink(4011); }); }). Interestingly, the difference between the 4 image and 20 image super resolution examples is less noticeable$ (document).ready(function() { $ (“#icl-4012–1917693503”).click(function() { ImageComparisonWidgetLink(4012); }); }). While there is some advantage$ (document).ready(function() { $ (“#icl-4013–396364473”).click(function() { ImageComparisonWidgetLink(4013); }); }) to stacking more images, returns are diminishing.

You’ll notice we’ve included two versions of our 4-stack and 20-stack: Median and Average, which refer to the stacking method used in Photoshop (described in detail below). Overall, the median method handles ghosting from moving objects$ (document).ready(function() { $ (“#icl-4015-104250703”).click(function() { ImageComparisonWidgetLink(4015); }); }) better than the averaging method.

Methodology

There are numerous tutorials providing instructions for creating a super resolution image in Photoshop – this one by Ian Norman on PetaPixel is among our favorites. Distilled down to its simplest terms, there are four easy steps:

  1. Bring all images into Photoshop as a stack of layers
  2. Resize the image to 200% width and 200% height using ‘Nearest Neighbor’
  3. Auto align all the layers
  4. Average the layers by setting each layer’s opacity to 1/layer number (the 1st layer will be 1/1 so 100% opacity, the 2nd layer will be 1/2 so 50% opacity, and the 4th layer will be 1/4 or 25% opacity, and so on).
  5. Sharpen the image using a Radius setting of 2, and a suitable Amount setting (we used 200% for the 4 image stack and 300% for the 20 image stack – the more images you stack the more amenable the composite will be to aggressive sharpening)

Alternatively, for the fourth step you can convert all layers to a ‘Smart Object’ and change the stacking mode to ‘Median’. This can help deal with ghosting from movement in your final image, but can also take longer to process.

Finally, you can resize the final output by 50% width and height (we prefer Bicubic resampling for this step) to get the shot back to its original resolution, but with far more detail and cleaner output. Or, you can opt to save the high-resolution file if you print big, but just keep in mind that for a 36MP camera, that’s a 144MP file. You can always re-upscale a super resolution file you’ve shrunk, and if you use the ‘Preserve Details 2.0’ resampling method in Photoshop to do so, the results are often impressive and hard to distinguish from the higher resolution super resolution file.

Takeaway

You don’t need any particularly special camera to generate images that look like they were taken with a higher resolution, larger sensor camera. Just use the technique outlined here or in Ian’s article.

And if you’re shooting landscapes and cityscapes, you likely already have multiple photos of the same composition captured with changing light. Chances are that due to the wind, natural vibrations, etc., the shots have at least some sub-pixel movement between them (you can always gently nudge your camera between exposures to ensure there’s at least some shift). So why not go back through your library and take advantage of super resolution?

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Here’s how to create a super resolution photo with any camera

Posted in Uncategorized

 

Samsung’s super fast 970 PRO and EVO NVMe SSDs offer ‘exceptional endurance’

25 Apr

Samsung Electronics has launched the 970 PRO and EVO solid state drives (SSD), aimed at tech enthusiasts and professionals. Thanks to very fast read/write speeds and large capacities they look like interesting options for anyone handling and editing large amounts of image or video data.

The new drives come in the M.2 form factor and with the latest PCIe Gen 3×4 lane interface, offering NVM Express (NVMe) bandwidth. The 970 PRO is capable of sequential read speed of up to 3,500 MB/s and sequential write speed of up to 2,700 MB/s. The EVO models offers the same read speed but a slightly slower write speed of up to 2,500 MB/s. In terms of write speed that equals a 30 percent improvement over the previous 960 generation.

Samsung has achieved this by implementing its latest V-NAND technology and an upgraded Phoenix controller. Additionally, the 970 EVO Samsung’s TurboWrite technology uses a buffer of up to 78GB to enable even faster write speeds.

That said, the new models aren’t only fast, Samsung also claims they are very reliable. Samsung’s Dynamic Thermal Guard technology protects the drives against overheating through temperature monitoring, and a heat spreader and new nickel-coating on the controller lower temperatures further. Samsung’s warranty covers a 5 year period or up to 1,200 terabytes written.

The 970 EVO will be available in 250GB, 500GB, 1TB and 2TB sizes, the 970 PRO with capacities of 512GB and 1TB. Both drives will be available worldwide starting May 7th, 2018. The Pro model starts at $ 330, while the smallest EVO drive will set you back $ 120.

More information, including full specs, is available on the Samsung Electronics website.

Press Release

Samsung Electronics Sets New Performance Standards for NVMe SSDs with 970 PRO and EVO

New 970 series enables high-performance computing through enhanced speed, exceptional endurance and system design flexibility

Samsung Electronics, today introduced the Samsung 970 PRO and EVO, the third generation of its industry-leading consumer solid state drive (SSD) lineup. Having led the market with the first consumer-focused NVMe SSD in 2015, Samsung continues to push the performance barriers with this latest generation of SSDs that are built for tech enthusiasts and professionals so that they can enjoy higher bandwidth for intensive workloads on PCs and workstations.

“Samsung has led the NVMe SSD industry since its inception, and the company continues to define the latest standards of consumer storage with unprecedented performance of the 970 PRO and EVO SSDs,” said Un-Soo Kim, senior vice president of Brand Product Marketing, Memory Business at Samsung Electronics. “The 970 series sets a new bar in all aspects for the NVMe SSD market with groundbreaking performance, superior reliability and best-in-class capacity.”

The Samsung 970 PRO and EVO are designed based on the M.2 form factor standard and with the latest PCIe Gen 3×4 lane interface. The 970 series maximizes the potential of NVMe bandwidth, delivering unparalleled performance for processing large volumes of data, including 3D, 4K graphics work, high-end games and data analytics.

The 970 PRO enables sequential read speed of up to 3,500 MB/s and sequential write speed of up to 2,700 MB/s1, while the EVO features sequential read speed of up to 3,500 MB/s and sequential write speed of up to 2,500 MB/s2. The sequential write speeds represent an enhancement of up to 30 percent over the previous generation3, thanks to Samsung’s latest V-NAND technology and the newly designed Phoenix controller. The 970 EVO, in particular, utilizes the Intelligent TurboWrite technology, which uses a large buffer size of up to 78GB4 to enable faster write speeds.

In addition to the advancements in performance levels, the 970 PRO and EVO deliver exceptional endurance and reliability. Featuring a five-year warranty5, or up to 1,200 terabytes written6 – 50 percent higher than those provided for the previous generation7 – the 970 PRO and EVO are built to last. The Dynamic Thermal Guard technology safeguards against overheating by automatically monitoring and maintaining optimal operating temperatures, while a heat spreader and new nickel-coated controller further lower the SSD temperatures.

The 970 PRO and EVO also provide greater system design flexibility for the high-performance computing systems. Offering a variety of high capacity options in a compact M.2 form factor – including the single-sided 2TB EVO model – the 970 series enables convenient storage expansion across a wide range of computing devices.

The 970 EVO will be offered in 250GB, 500GB, 1TB and 2TB8 capacities, and the 970 PRO in 512GB and 1TB capacities. The 970 PRO and EVO will be available for purchase worldwide starting May 7, 2018, with manufacturer’s suggested retail prices starting at $ 329.99 and $ 119.99 USD, respectively. For more information, including warranty details, please visit www.samsung.com/SSD, www.samsungssd.com.


1 970 PRO and EVO performance may vary based on SSD’s firmware version, system hardware and configuration. Performance measurements based on IOmeter 1.1.0. *Test system configuration: Intel Core i7-7700K CPU @4.2GHz, DDR4 2400MHz 32GB, OS-Windows 10 Built 10240, Chipset–ASUS PRIME Z270-A.
2 Performance may vary based on SSD’s firmware version, system hardware and configuration. Performance measurements based on IOmeter 1.1.0.
Write performance measurements are based on Intelligent TurboWrite technology.
The sequential write performances after TurboWrite region are: 300 MB/s(250GB), 600 MB/s(500GB), 1,200 MB/s(1TB) and 1,250 MB/s(2TB).
The random write performances after TurboWrite region are: 80,000 IOPS(250GB), 160,000 IOPS(500GB) and 300,000 IOPS(1TB/2TB).
* Test system configuration: Intel Core i7-7700K CPU @4.2GHz, DDR4 2400MHz 32GB, OS-Windows 10 Built 10240, Chipset–ASUS PRIME Z270-A.
3 Up to 29% and 32% in sequential write speeds, respectively, have increased when compared to Samsung 960 PRO and EVO.
4 970 EVO Intelligent TurboWrite buffer size varies based on the capacity of the SSD: 13GB for 250GB model, 22GB for 500GB model, 42GB for 1TB model and 78GB for 2TB model. For more information on the TurboWrite, please visit www.samsungssd.com.
5 Five years or TBW, whichever comes first. For more information on the warranty, please find the enclosed warranty document in the package.
6 Warrantied TBW(Total byte written) for 970 PRO: 600TB for 512GB model, 1,200TB for 1TB model; Warrantied TBW(Total byte written) for 970 EVO: 150TB for 250GB model, 300TB for 500GB model, 600TB for 1TB model, 1,200TB for 2TB.
7 50% increase when compared to Samsung 960 PRO and EVO.
8 1GB=1,000,000,000 bytes by IDEMA. A certain portion of capacity may be used for system file and maintenance use, so the actual capacity may differ from what is indicated on the product label.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Samsung’s super fast 970 PRO and EVO NVMe SSDs offer ‘exceptional endurance’

Posted in Uncategorized

 

Adobe apologizes for Lightroom Classic CC bugs, releases bug fix update

25 Apr
Credit: Adobe

The latest update to Lightroom Classic CC—a ‘massive update’ to camera profiles for both Lightroom and ACR—came complete with an infuriating set of bugs that, judging by our comment section, left Adobe users quite frustrated. But have no fear: the software giant is back with an apology and a slew of bug fixes in the form of Adobe Lightroom Classic CC 7.3.1.

The release went live this morning, complete with this apology on the Adobe blog:

We heard your feedback and felt that parts of the release didn’t uphold the level of quality that we hold ourselves to. We’re happy to report that these issues were resolved and now available for immediate download. Some of the issues resolved included converting presets, sorting and copying/pasting profiles, translation errors, along with crash fixes.

You can download the update and read the full release notes at this link, but here is the TL;DR about what this Lightroom Classic CC update fixes:

  • An issue where some presets were not converting to the new format.
  • An issue with B&W legacy presets where the profile resets to Adobe Standard
  • An issue where Develop presets were not sorting correctly
  • Translation errors in other languages for some profiles
  • An issue where users were unable to copy/sync Black and White Mix settings
  • Lightroom backup catalog error issues.
    • Note: To resolve corruption issue in the backed up catalogs, update to Lightroom Classic CC v7.3.1 and then back up your catalogs again. If you’re backing up your catalogs on macOS, see this known issue related to catalog compression below.
  • Known Issue on macOS only: When backing up your catalogs on macOS, Lightroom Classic doesn’t compress (zip) catalogs that have a file size less than 4 GB. As a workaround to this issue, manually compress the backed up catalog files. Compressed files take up less hard disk space. By default, Lightroom Classic saves backed up catalogs to the following location on macOS:
    • /Users/[user name]/Pictures/Lightroom/[catalog name]/Backups

To update to the latest version, simply run the update in the Creative Cloud Desktop App.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Adobe apologizes for Lightroom Classic CC bugs, releases bug fix update

Posted in Uncategorized

 

Video: Remember that your gear is more advanced than Ansel Adams’

25 Apr

“Every famous photograph was made with a camera less advanced than the one you are using now.” This paraphrased quote is the inspiration behind The Art of Photography’s latest YouTube video titled “Your camera is better than Ansel’s.” In the ten-minute video, Ted Forbes breaks down his thoughts on the idea that, instead of taking an introspective approach to our photography work, we tend to blame the gear and use that as an excuse to our shortcomings as artists.

How often do you hear the phrase “I don’t have the right lens to get the shallow depth of field I want” or “I don’t have this camera body that shoots 15 frames per second.” These laments aren’t uncommon among photographers, but according to Forbes, they miss the point.

Sure, it’s fun to gawk over the latest and greatest gear, but it’s by no means necessary in order to create fantastic artwork—this morning’s Behind the Scenes article by Michael Benanav should more than prove that point. As Forbes elaborates throughout the video, gear is little more than a tool to create the artwork we’ve envisioned in our head—a means to an end.

Forbes summarizes this concept in the video’s description:

The truth is that important work… work that matters… doesn’t have anything to do with the technology we have access to. It has everything to do with what we have to say and communicate visually. Photography is an act of speaking.

It’d be an oversight to say there’s never a time when you need new gear. After all, it’s almost impossible to properly photograph a deer a few hundred yards away without a 400mm lens. But it’s something to think about when considering new equipment. Is that new camera actually necessary to produce the results you desire? Or is the gear you’re lusting over little more than a crutch that will help you avoid addressing your lack of a vision or direction?

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Video: Remember that your gear is more advanced than Ansel Adams’

Posted in Uncategorized

 

Monkey copyright lawsuit finally over, court rejects PETA’s claims

25 Apr
Photo: David Slater

PETA’s “monkey selfie” copyright lawsuit has finally, finally reached a satisfying ending. On Monday, a three-judge panel with the Ninth Circuit Court of Appeals ruled that only humans can pursue copyright infringement claims, upholding a lower court’s decision after a judge refused to let PETA settle its way out of this likely conclusion.

In its ruling, the court said:

Affirming the district court’s dismissal of claims brought by a monkey, the panel held that the animal had constitutional standing but lacked statutory standing to claim copyright infringement of photographs known as the “MonkeySelfies.” … The panel held that the monkey lacked statutory standing because the Copyright Act does not expressly authorize animals to file copyright infringement suits.

The ruling follows the Ninth Circuit’s decision earlier this month to reject PETA’s settlement dismissal request.

PETA had argued that the macaque named Naruto, not camera owner David Slater, owned the copyright because it took the image itself. Courts had expressed skepticism about PETA’s argument, also questioning whether the organization had a suitable relationship with the monkey to sue on its behalf.

In September 2017, PETA announced a settlement with Slater; it asked the Ninth Circuit Court to dismiss the case and vacate the lower court’s ruling. However, in a decision earlier this month, the Ninth Circuit indicated that it had rejected the request because it seemed to be PETA’s way to avoid establishing a precedent. The court had also stated:

As one of our colleagues once warned in a similar context, “courts must be particularly wary of abetting ‘strategic behavior’ on the part of institutional litigants whose continuing interest in the development in the law may transcend their immediate interest in the outcome of a particular case.”

The ruling doesn’t impact PETA’s settlement with Slater, which requires the photographer to donate 25% of future revenue from the image to charities that protect crested macaques in Indonesia.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Monkey copyright lawsuit finally over, court rejects PETA’s claims

Posted in Uncategorized

 

Behind the scenes of Himalaya Bound: Images of nomads in north India

24 Apr
17-year-old Mariam leads her family’s caravan through the foothills of the Himalayas, while carrying her 2-year-old niece in the blue plaid shawl over her shoulders.

The forests and mountains of north India are home to a unique nomadic tribe whose world revolves around caring for the water buffaloes that they herd. During the fall and winter months, the Van Gujjars dwell in the lowland jungles of the Shivalik Hills, where thick foliage provides plenty of fodder for their animals at that time of year. But by mid-April, as temperatures there soar above 110 degrees, the leaves and grasses wither and die and creeks and streams run dry. With nothing left for their buffaloes to eat or drink, the Van Gujjars must move elsewhere.

Entire families, from infants to the elderly, trek with their herds up into the Himalayas, where melting snows reveal lush alpine meadows laced by gurgling streams, which provide abundant grass and water throughout the summer. When the cold sets in at the end of September, they head back down to the Shivaliks, where the jungle has sprung back to life following the monsoon rains. The tribe has followed this cycle of seasonal migration—up in summer, down in winter, perpetually living in the wilderness and shunning settled village life—for over 1,500 years.

My most recent book, Himalaya Bound: One Family’s Quest to Save Their Animals – And an Ancient Way of Life, which was published by Pegasus Books earlier this year, follows one extended Van Gujjar family on their spring migration into the mountains. In this article, I’ll delve into the story behind the images that are featured in the book’s photo insert, which is sandwiched between 230 pages of text.

Who Am I?

I’m a freelance photographer and writer for magazines and newspapers, including The New York Times. I’m also the author of three books.

I often find myself drawn to stories about nomadic communities around the world—for my first book, Men Of Salt: Crossing the Sahara on the Caravan of White Gold, I traveled 1,000 miles over age-old trade routes north of Timbuktu with one of the last working camel caravans on Earth. I’ve spent time with nomadic / transhumant people in Africa, the Middle East, a number of states in India, as well as Mongolia and the Southwestern U.S.

Before taking on the project that became Himalaya Bound, I had dreamed of migrating with a tribe—partly to document what is becoming an increasingly rare way of life, and partly because I imagined it would be an amazing thing to experience.

The Van Gujjars’ livelihoods are based almost entirely on the sale of buffalo milk

Planning

No, I did not fly over to India, wander into the jungle, and start randomly knocking on huts asking Van Gujjars if I could migrate with them. As the idea for this project began to crystallize in my mind, it seemed wise to investigate how realistic it was to pursue before channeling too much time, money, and energy in its direction.

My first step was emailing the director of the Society for the Preservation of Himalayan Indigenous Activities (SOPHIA)—a small non-profit organization based in Dehradun, India, that advocates for the tribe—asking if he thought it would be possible for me to travel with a nomadic family and document their migration from beginning to end. He replied that he would check in with a few Van Gujjars to see if they were open to the idea. As it turned out, they were; since they were being pressured by the government to abandon their way of life against their will, they thought it might be helpful if someone would share their story with the rest of the world. SOPHIA also connected me with a translator who was willing to join me for most of the journey.

Gear

My choice of camera gear was determined by three factors: weight, budget, and year. The year was 2009 and I had to watch what I spent. But my main consideration was the fact that I was embarking on an assignment during which I would be trekking for over a month, from the lowlands into the Himalayas, while hauling everything I needed on my back—including a sleeping bag, clothing appropriate for temperatures ranging from over 110 degrees to below freezing, a first aid kit, and more. Thus, my goal was to make the most out of as little camera gear as I could carry and still get satisfying images.

I ended up taking a Nikon D90 (remember the year) with a few Nikon lenses: an 18-70mm zoom, plus 50mm F1.4 and 35mm F1.8 primes. I kept my old Nikon D70 in the bottom of my bag as a backup in case the D90 failed (it never did), and I brought along a low-quality but very lightweight tripod. Knowing that I might spend days or weeks without an electrical outlet, I also carried a bunch of batteries.

The prime lenses proved to be crucial: many days, we hit the trail by 3am, aiming to arrive at our next camp as early in the morning as possible. This meant that my best shooting opportunities on the trail were often during the liminal hours in weak light around the break of dawn. With the caravan marching forward, I had to get shutter speeds fast enough to stop motion, and the only way to do that was with wide apertures—often shooting at F2. Carrying my fully loaded backpack, I would run ahead of the family, pause, turn, shoot, and repeat, as they quickly caught up to me.

Hamju carries his nephew, Karim
Goku carries her brother, Yasin, while following the Yamuna River into the Himalayas.

Getting the Images

The most important element in the series of images I returned with was the time I spent deep in the Van Gujjars’ world. I lived with them for forty-four days: walking with them, herding buffaloes with them, swimming in rivers with them, joking around with them, helping with daily chores, and sleeping under their tents. I formed real relationships with my companions, which I think accounts for how natural they appear and how clearly their personalities are communicated through the images.

I never set up shots or posed anyone—I either snapped away while they were doing whatever they happened to be doing or, for true portraits, they presented themselves however they liked.

The heads of four Van Gujjar families discuss their strategy for moving higher into the Himalayas, after the government has threatened to ban them from their ancestral alpine meadows, where they have gone each summer for generations, because those meadows are now within a national park. They scrambled to find a different place to spend the summer.
Jamila cooks lunch on the trail, with her 2-year-old son Yasin on her lap.
Mustooq and his little cousins, Bashi and Salma, asked for their picture to be taken.
Dhumman, the father of the family I traveled with, wanted a photo with his favorite buffalo.

Of course, the time I spent immersed with the tribe also allowed me to witness—and shoot—the scenarios that were essential to telling their story, as they happened.

One part of the Van Gujjars’ culture that I needed to capture was the deeply personal connection that they have with their water buffaloes. They think of their large horned animals as family members, and readily sacrifice their own comfort for their herds. If a buffalo falls ill, Van Gujjars become wracked with concern; if one dies, they mourn for it as though it were human. They never eat their buffaloes nor sell them for slaughter, using them only for the milk that they produce. (Though they are Muslim, Van Gujjars are also traditionally vegetarian, averse to the idea of killing animals.)

In order to get photos that convey this relationship in a way that was organic and authentic and not staged, I had to be there during those moments when that kind of closeness was demonstrated, and my companions had to be comfortable enough with me around so the fact that a foreigner with a camera was taking pictures didn’t alter the moment for them.

Goku pets one of her family’s buffaloes, at about 10,500’ above sea level.
Sharafat dries off after a swim in the Yamuna River, trusting a buffalo enough to use it as a lounge chair.
Karim gets his milk straight from the source.
Bashi watches the herd at a camp in the mountains.

In the course of documenting the migration, unexpected issues arose. While covering the human rights aspect of the story, I learned that the government was threatening to ban a number of Van Gujjar families—including the one that I was traveling with—from their ancestral alpine meadows, where they had spent summers for many generations. Those meadows had been absorbed into a national park, and park authorities didn’t want the nomads using them any longer. The Forest Department announced that any Van Gujjars who entered the park would be arrested and have their herds seized—while refusing to offer them any alternative pastures.

This left these families deeply shaken, facing dire circumstances, because they had no idea where they would take their buffaloes for the season. Hence, when the father of the family I was with joined about 80 of his fellow tribespeople at Forest Department headquarters in Dehradun (about two hours by bus from where we were camped) to plead with park officials to let them go to their traditional pastures, I went to take pictures.

Though I did nothing more than photograph what was a very peaceful scene, the park director had me arrested for being a “foreign political agitator,” and when I objected I was forced into a police car at gunpoint. Fortunately, no one thought to demand my memory cards, and the captain at the police station released me relatively quickly, realizing that the charge was absurd. What could have been a nightmare turned into a gift: by the time I rejoined the Van Gujjars that night, word about the incident had spread among the tribe, so even people I hadn’t yet met trusted me by my reputation, knowing that I had been pushed around by the same person who was pushing them around.

Weeks later, another episode posed a photographic dilemma for me. While camped at about 10,000 feet above sea level, a cataclysmic Himalayan storm struck, during which a tree washed over a cliff and landed on several young buffaloes, crushing one’s front left leg. A broken bone stuck out of the yearling’s flesh and the hoof below it flopped around like it was attached by a rubber band. It was bad, really bad, and because of how close they feel to their animals, everyone in the family was devastated—even the men were weeping.

Watching this unfold, part of me was aching to take pictures of this scene. But another part of me felt that in this moment of raw anguish, it could be the wrong thing to do: that the snapping of a shutter could create a self-consciousness that would inhibit my companions’ experience and their expressions of suffering and vulnerability.

Bashi comforts the yearling with the broken leg

I vividly remember a photograph that once appeared on the front page of a major American newspaper, probably twenty years ago or so: it was taken at a funeral, I believe in England, after some horrible tragedy. I don’t recall the specific circumstances—what stood out to me was that one of the graveside mourners depicted in the image was looking at the camera dead-on, and using her fully extended middle finger either to wipe a tear, or to convey a not-so-subtle message to the photographer. It was hard not to imagine it was the latter.

I think it matters how taking someone’s picture makes them feel, and I try to weigh how important it is to get any one image if the taking of that image might be hurtful or disrespectful in some way. There are an array of factors to consider in what can be a split-second decision, but I do think it’s worth questioning how many photos the world needs of grieving people in tears. Surely we need some, but how often do those photos serve a larger purpose—such as provoking outcry against genocide or bringing aid to famine victims or filling in a crucial piece of an important story—and how often might those images be, say, a photojournalistic cliché?

In the particular dilemma that I faced, I decided the world’s need for photos of this family in their moment of distress was outweighed by what I perceived to be the family’s need to freely express their feelings without a camera clicking around them. I felt as though shooting right then would have been greedy—as though I would have been willing to make people I cared about feel uncomfortable so I could return with a photo of their suffering. I kept my lens cap on until a semblance of composure returned, hoping that perhaps there is some kind of photographer’s karma, which would reward me with even better shooting opportunities for letting this one pass by.

I don’t claim any moral high ground for making that choice. It was simply the right choice for me, in that moment. I’ve talked to a number of photographers who adamantly disagree with my decision, and I understand and respect their opinions even if I don’t share them. Of course, since I’m a writer as well as a photographer, I knew that I could always write about the scene later, creating a deeply moving image with words, thus telling the story without disturbing the moment as it was happening. And a couple of days later, I felt like I did receive a bit of the photographic-karmic reward I’d hoped for.

The family decided to save the yearling, splinting its leg and carrying it up and over a 3000-foot-tall Himalayan pass to the meadow where they would spend the summer.
This was one of the most incredible things I’ve ever seen. And they did it not because the animal was worth much money, but because they love their buffaloes and would never leave one behind if there was any chance of saving it.

After the Migration

I’ve been back to visit the family I traveled with a few times over the years since the migration. Once, I was lucky enough to catch them on their way back down from the Himalayas, and was able to join them for a few days on the road.

Though I had given them many prints of the pictures I took, it wasn’t until 2016 that any Van Gujjars got a real taste of what I was doing with this story. That year, a set of my photos from the migration was exhibited in New Delhi at the Indira Gandhi National Centre for the Arts, and I gave a slide show at the opening. A few people from the tribe had been invited to attend, and though none of my companions were able to come, some of their cousins did.

The presentation was translated into Hindi as I gave it, and afterwards one of the Van Gujjars asked for the microphone and told the audience, “This is our life!” saying he was very happy that their story was being told. It was the most satisfying form of validation that my work on this project could have received.


Michael Benanav writes and shoots for The New York Times, Sierra, Geographical, The Christian Science Monitor Magazine, Lonely Planet, and other publications. His photographs have been used by international non-profit organizations and featured in National Geographic Books, on CBS’ 60 Minutes, at Lincoln Center in New York, and in exhibition at the Indira Gandhi National Center for the Arts in New Delhi.

To see more of his work, visit www.michaelbenanav.com. To see more about his new book, Himalaya Bound: One Family’s Quest to Save Their Animals – And an Ancient Way of Life, visit www.himalayabound.com.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Behind the scenes of Himalaya Bound: Images of nomads in north India

Posted in Uncategorized

 

Demo: How to edit professional beauty images with GIMP on Linux

24 Apr

Though Photoshop remains the most recognizable image editing application out there, open-source alternative GIMP is still around, still free, and still receiving updates. In this video tutorial, photographer Shane Milton spends around 25 minutes demonstrating how to use the software to apply a pro-level beauty edit to an agency’s model image.

If you want to go fully open source for your photo editing, Milton is a great resource. His YouTube library offers numerous other videos on GIMP and free Lightroom alternative Darktable. In this particular video, Milton uses a Wacom Intuos Pro Small tablet with GIMP 2.9 running on Linux. He previously demonstrated optimizations that users could make to this version of GIMP, as well as setting up the Wacom tablet for use with Linux.

GIMP can be downloaded at this link for Windows, macOS, Linux, BSD, and Solaris.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Demo: How to edit professional beauty images with GIMP on Linux

Posted in Uncategorized

 

Meizu unveils the 15 Plus smartphone with stabilized tele-camera

24 Apr

Chinese smartphone manufacturer Meizu has launched a new high-end model, the Meizu 15 Plus. And based on specs alone, the 15 Plus could be well-worth a closer look for mobile photographers who are open to the idea of buying from a less established brand.

In the camera department, a 12MP 1/2.3″ main sensor is combined with a 20MP secondary camera that features a 2x zoom factor. On the main camera, light is captured through a F1.8 lens while the tele-lens has to make do with a slower F2.8 aperture. Both lenses are equipped with optical image stabilization, though.

As with most similar systems, the optical zoom is enhanced with computational methods and Meizu promises a 3x “lossless” zoom, and the cameras features multi-frame noise reduction and HDR as well. To view and edit those images, the phone is equipped with a 5.95-inch AMOLED screen with QHD resolution and a notch-less 16:9 aspect ratio.

In the processing department, the Meizu deploys the Exynos 8895 chipset from last year’s Samsung flagship models, and users can choose between 64 or 128GB storage—unfortunately, there is no expansion slot. All components are housed in a body made of a stainless steel aluminum composite material.

The Meizu 15 Plus costs CNY 3,000 (approximately US$ 475) for the 64GB version and CNY 3,300 (approximately US$ 525) for the 128GB model. This sounds like a very decent deal for a tele-camera equipped device with high-end specs, but unfortunately, no pricing information for outside China has been provided as of yet.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Meizu unveils the 15 Plus smartphone with stabilized tele-camera

Posted in Uncategorized