Category: Uncategorized

  • The Fujifilm X-T4 is a portable, powerful 4K video rig

    I recently had an opportunity to shoot a short video while on vacation in New York, so decided to take the X-T4 with me. It’s a pre-production unit but one we’ve been told is close enough to final spec that we can show the video from it, so it seemed like a chance to put in some hours on the camera as we await a fully reviewable model.

    I don’t regret that choice. Traveling for four days to a considerably colder city meant my carry-on luggage was already full, so any camera gear I wanted to take needed to fit under the seat in front of me on the plane. I’m 1.85m (6’1″) tall, so I’m already a bit pressed for legroom on US domestic flights, but I was able to fit the camera, a lens, my laptop and an SSD in a small, slim camera bag – everything I need to shoot and edit – and slot it vertically between my feet.

    I was able to fit the camera, a lens, my laptop and an SSD under the seat in front of me on the plane

    Much as I was impressed by the Panasonic S1H, I couldn’t have fitted it in my bag: not with an appropriately flexible lens. The same is true of the X-T3: adding either a tripod or a gimbal would have meant paying bag fees on my trip.

    The camera, lens, mics, filters, SSD and laptop all fitted in a small, under-seat camera bag

    In general, the footage lives up to the standard I’ve come to expect from the X-T3: very, very good. I shot the whole video in a combination of Eterna or F-Log, for the higher contrast scenes, safe in the knowledge that I had Fujifilm’s F-Log-to-Eterna LUT saved on my laptop to get a good color match with minimal effort.

    The shoot itself went pretty smoothly, with no temperature concerns (no single clip is longer than 10 minutes but I shot around 30 minutes of footage essentially back-to-back). I remembered to pack the headphone dongle, so was able to monitor the audio, meaning I noticed when interference between the radio mic’s transmitter and receiver threatened to interrupt the interview recording.

    With the ability to capture 10-bit footage internally and less need for a tripod or gimbal, the X-T4 ends up being a pretty self-contained video package.

    The camera’s stabilization is really rather good, too. There’s none of the ‘grabbiness’ that was apparent the last time I shot with the X-H1, and it was my lack of technique, rather than the camera, that undermined some of the movement in the final video. At least on the pre-production camera, I didn’t see an appreciable improvement in the IS when I switched the ‘Boost’ mode on. Here I’d expect the camera to try more vigorously to maintain the original framing, but I found any difference hard to notice. I’ll try Boost IS again with ‘In-body + Digital IS’ on a future project.

    Assessing exposure

    One big thing I did notice, though: a camera that shoots video this good really needs better exposure tools. It’s got zebras, to let you interpret when things are clipped or near clipping, but not much more than that. With a bit of fiddling you can set them to check skin tones or a grey card but they can’t be set below 50%, and in F-Log mode your middle grey is supposed to be below 50%. Still, the new F-Log Assist function meant I was able to make a reasonable assessment by ‘eyeing’ the corrected preview, which was hugely useful. Having got used to using waveforms on the GH5S and S1H, I found myself really missing them here.

    Similarly, I found myself wanting the ‘shutter angle’ option from those cameras. Having to manually navigate from 1/48 sec shutter speed to 1/120 sec every time I switched from 24p to 60p shooting was an extra step that I wouldn’t have to make on the Panasonics. And an extra opportunity to get something wrong.

    I was only shooting video on this occasion, but that dedicated stills/movie switch helps de-clutter the menus, whichever mode you’re using, which made the camera faster to operate.

    As I always try to make clear, I’m learning as I go along, and this inevitably means making mistakes. Perhaps the most important lesson I learned on this project was to bring more memory cards than you think you need. I thought a 64GB card would be sufficient for a two minute video, but then decided to shoot the interviews from two different angles, doubling data requirements.

    Perhaps the most important lesson I learned on this project was to bring more memory cards than you think you need

    It was enough to force me to drop down to use the camera’s 200 mbps Long-GOP compression, rather than the maximum 400 mbps ALL-I mode. Apparently the difference is enough that you can begin to risk macro-blocking compression artifacts in high data scenes (F-Log scenes with finely textured suiting are more data-intensive than I realized).

    One of these days I’ll get everything right. One of these days I’ll even remember to capture some ‘room tone’ to plug the gaps in between subjects talking. But for now I’ll keep enjoying the learning journey – a journey on which the X-T4 makes for a supportive traveling companion. I certainly look forward to having it with me on my next trip.

    Articles: Digital Photography Review (dpreview.com)

  • Nikon releases N-Log 3D LUT for its D780 DSLR

    Nikon has released an N-Log 3D lookup table (LUT) for use when color grading footage captured with N-Log gamma on its D780 DSLR.

    The updated download is version 1.01, an update from version 1.00, which only offered the N-Log 3D LUT for Nikon’s Z6 and Z7 mirrorless camera systems. Version 1.01 includes the original Z6 and Z7 3D LUT files as well as the new cube-format 3D LUT file for the Nikon D780.

    Nikon says it’s tested the 3D LUT files in Adobe Premiere Pro CC, Apple Final Cut Pro X and Blackmagic Design DaVinci Resolve 16, but compatibility isn’t limited to those editing programs.

    You can find out more information and download the file for macOS and Windows computers on Nikon’s download page.

    Articles: Digital Photography Review (dpreview.com)

  • Ricoh spins off its 360-degree camera division, announces new ultra-compact selfie camera

    Ricoh has announced it’s spinning off its 360-degree camera division into a new startup called Vecnos and simultaneously releasing the first product from the Ricoh-backed venture.

    The Vecnos venture started back in 2018 when Ricoh decided, as part of its new business development initiatives, to create a team tasked with creating ‘specialized cameras for a new generation of consumers.’ This new team, led by Shu Ubukata (now Vecnos’ CEO), proved entrepreneurial enough to Ricoh that it decided to turn it into a separate startup, with Ricoh as the investor.

    There’s not much information about Vecnos, aside from a bare Twitter account, but to drum up some interest, Vecnos has announced its first product, a 360-degree ultra-compact camera that’s designed to ‘reinvent the selfie for social media natives.’

    Specifications are scarce for the prototype camera, but Vecnos does say it will feature a proprietary four-lens optical system with a single lens on the top and three lenses around the perimeter of the wand-like device. Vecnos says the camera will work with an upcoming mobile app that will allow users to ‘users can easily enhance and share their images and videos on social media platforms.’

    Based on the above promotional video, the camera appears to function almost identical to the Ricoh Theta cameras, with the ability to capture 360-degree photos and video and recompose the content as you see fit using the accompanying mobile app. The device itself features a power button, a shutter button, a dedicated button for switching between still and video mode and a what appears to be a pair of holes for an internal stereo microphone.

    No pricing information has been shared, but Vecnos says the camera will be available in 2020.

    Ricoh spins out Vecnos to focus on consumer 360-degree camera segment

    First product aims to reinvent the selfie for social media natives

    MARCH 10, 2020, YOKOHAMA, Japan – Vecnos Inc., the visual revolution company, today unveiled its vision to be a leader in the consumer 360-degree camera market and announced its first product, an ultra-compact camera that aims to reinvent the selfie for social media natives. Vecnos is a new startup venture spun out of and funded by Ricoh Company, Ltd.

    Vecnos was founded by the core team that designed and launched the pioneering Ricoh Theta 360 camera in 2013. At Vecnos, the team—led by CEO Shu Ubukata—will leverage its expertise in optical and artificial intelligence (AI) technologies to develop new approaches to 360-degree and other specialized cameras, software and apps with a goal of making advanced imaging accessible to and enjoyable for broad consumer audiences.

    “Enabled by advances in technology, combined with new social networking platforms, we are building a new generation of cameras, with our first product designed to reinvent the selfie and be used by a younger consumer,” explained Ubukata. “Our objectives are to combine ease of use with advanced capabilities for shooting, enhancing and sharing images, in beautiful and elegantly designed products that people will want to use. We aim to inspire a new generation.”

    Vecnos’ first product will be a 360-degree camera that achieves new levels of miniaturization in a sleek and sophisticated design. A proprietary four-lens optical system, with three lenses on the side, and one on the top, enables the camera to be ultra-slim and pen-shaped. Using the Vecnos app, users can easily enhance and share their images and videos on social media platforms. The 360-degree camera and app will be available in 2020.

    Emerging from Ricoh’s new business development initiatives, Vecnos was founded on the principles of open innovation and leveraging third-party knowledge, said Ricoh Company, Ltd. President and CEO Yoshinori “Jake” Yamashita. He explained: “Ricoh has always been committed to supporting innovation in visual communications. As part of our new business development initiatives, a team led by Shu Ubukata was formed in 2018 to create specialized cameras for a new generation of consumers. Ultimately, we all realized that it made sense for this highly entrepreneurial team to be spun out into its own venture. And with that, Vecnos was born. Ricoh is proud to be the lead investor in a young company with a Ricoh pedigree and a vision to build revolutionary products.”

    Articles: Digital Photography Review (dpreview.com)

  • Nikon delays its D6 DSLR until May 2020, due to supplier issues caused by COVID-19

    Nikon USA has announced it is delaying the release of its new D6 DSLR due to issues caused by COVID-19.

    In a short announcement on its website, embedded below, Nikon USA says the D6 has been delayed ‘As a result of delays in the procurement of parts and components from a third-party cooperating company due to measures implemented in response to the spread of COVID-19.’ Nikon says the new release timeframe is May 2020 and notes it ‘announce the new release date once it has been determined.’

    This delay will further push the release date closer to the 2020 Olympics, which is set to take place in Tokyo from July 24 through August 9. However, as coronavirus cases and mortalities due to the virus ramp up, the likelihood of the Olympics being delayed or downright canceled increases as well.

    Apology and Notice of Delay in the Release of the Nikon D6 Digital SLR Camera

    MELVILLE, NY – Thank you for choosing Nikon for your photographic needs.

    As a result of delays in the procurement of parts and components from a third-party cooperating company due to measures implemented in response to the spread of COVID-19, the release of the new Nikon D6 digital SLR camera, originally planned for March 2020, will be delayed. We sincerely apologize to our customers and all those concerned for any inconvenience this may cause.

    We are now planning to release the Nikon D6 in May 2020 and will announce the new release date once it has been determined.

    We will continue to closely monitor the situation and do our utmost to deliver this new camera as soon as possible. Thank you for your understanding and patience in this matter.


    About Nikon
    ?

    Nikon Inc. is a world leader in digital imaging, precision optics and photo and video capture technologies; globally recognized for setting new standards in product design and performance for an award-winning array of equipment that enable visual storytelling and content creation. Nikon Inc. distributes consumer and professional digital SLR cameras, NIKKOR optics, Speedlights and system accessories, Nikon COOLPIX® compact digital cameras and Nikon software products, as well as the revolutionary Nikon Z series of mirrorless cameras and NIKKOR Z lenses, which achieve a new dimension in optical performance. In 2018, Nikon Corporation, the parent company of Nikon Inc., announced the production of 110 million NIKKOR lenses, creating a new milestone in Nikon’s heritage of superior optics. For more information, dial (800) NIKON-US or visit www.nikonusa.com, which links all levels of photographers and visual storytellers to the Web’s most comprehensive learning and sharing communities. Connect with Nikon on Facebook, Twitter, YouTube, Instagram, Vimeo and Flickr.

    Articles: Digital Photography Review (dpreview.com)

  • Adobe joins Nikon in withdrawing from this year’s NAB Show in Las Vegas due to COVID-19

    Adobe has announced it’s withdrawing from this year’s NAB Show in Las Vegas due to concerns surrounding COVID-19 (the coronavirus). In the brief statement, embedded below, Adobe says it is disappointed it has to make this decision but says ‘the health and safety of our employees, customers and partners are always our priority.’

    This announcement comes just days after both AJA and Nikon confirmed the companies wouldn’t be attending NAB 2020. With respect to this year’s NAB Show, the organizers have a webpage dedicated to information about COVID-19 and how the show will be different this year. NAB is still scheduled to take place April 18-22. We have contacted the organizers of the NAB Show for comment regarding the departure of Adobe, AJA and Nikon. We will update this article accordingly if we receive a response.

    Adobe Withdraws from NAB Show 2020

    Each year, we look forward to seeing our video community at NAB to talk about the latest trends and our product innovations. Over the past few weeks, we have been closely monitoring and evaluating the situation around COVID-19 and have made the difficult but important decision to cancel our presence at the show this year.

    While we are disappointed, the health and safety of our employees, customers and partners are always our priority. We look forward to engaging with our NAB community through a digital experience in the near future.

    Adobe and Nikon withdrawing from the NAB Show follow on the heels of the annual CP+2020 show in Japan being canceled at the end of February. The impact of COVID-19 has been felt outside of the realm of tradeshows as well, with the virus affecting the supply chains for camera manufacturers. Nikon has just announced that the release of the Nikon D6 flagship DSLR camera has been delayed from this month until May. Canon has proactively suspended production at three of its plants in Japan.

    The COVID-19 coronavirus has already had a large impact on industries around the world, including the photo industry, and companies are working hard to mitigate the risk for their employees. As governments and health agencies around the world work to better understand and contain COVID-19, it is difficult to predict the extent of the impact that the virus will have on the photo industry, but it’s safe to expect today’s announcement from Adobe is not the last of its kind we will hear in the coming weeks and months. For more information on how COVID-19 is affecting the photo industry, click here.

    Articles: Digital Photography Review (dpreview.com)

  • UK’s ‘The Photography Show’ has been postponed due to COVID-19, is still on course for a 2020 show

    The organizers behind The Photography Show and The Video Show, have announced the event is being postponed due to ongoing concerns regarding COVID-19 (the coronavirus). Originally set to take place from March 14 through March 17 at the National Exhibition Centre in Birmingham, England, the event will now take place at a later time in 2020, if all goes according to plan.

    In the statement shared on The Photography Show website, organizers say they have ‘taken the extremely difficult decision to postpone The Photography Show & The Video Show until later in the year, when we will be able to deliver the show you deserve.’

    The organizers note any current ticket-holders will be able to use their tickets for the future event, whenever the dates are established. In the event attendees aren’t able to attend at the future date, they will have the option to receive a refund, including any ‘Extras’ purchased alongside the main ticket.

    According to The Photography Show website, over 300 brands and 32,000 visitors show up annually to see the latest products and attend over 270 talks, demos and galleries over the course of the four-day show. Canon, Epson, Fujifilm, Nikon, Panasonic, Rode, Sony, and Westcott are just a few of the featured exhibitors who are planning to attend the event. The organizers say they will ‘aim to keep the programme the same where possible, subject to speakers being available for the new dates [and] hope that the exhibitor list will remain much the same.’

    You can visit The Photography Show’s website to view more details.

    Articles: Digital Photography Review (dpreview.com)

  • NASA Curiosity rover breaks its own record with new 1.8-billion-pixel Mars panorama

    On March 4, NASA shared the highest-resolution panoramic Mars image ever captured by its Curiosity rover. The panorama features 1.8 billion pixels and is comprised of more than 1,000 individual images captured by the rover over the Thanksgiving 2019 holiday break in the US.

    NASA explains that Curiosity captured two different panoramas using two different lenses: the record-breaking 1.8-billion-pixel panorama using the Mast Camera (‘Mastcam’) with a telephoto lens and a smaller 650-million-pixel panorama using a medium-angle lens. The larger panorama captured with the telephoto lens was not able to include most of the rover in the final image, but the lower-resolution panorama does include Curiosity amid the landscape.

    Curiosity’s smaller 650-million-pixel panorama. Credits: NASA/JPL-Caltech/MSSS

    The Mastcam is mounted at a height of 2m (6.5ft) on Curiosity; it supports capturing color images and videos using ‘left eye’ and ‘right eye’ lenses featuring 34mm and 100mm focal lengths. The camera has a resolution of 2MP, which produces images with a 1600 x 1200 resolution. When recording video, Curiosity’s Mastcam can capture 10 frames per second. According to NASA, the rover’s 8GB storage can hold 5,500 or more Raw frames.

    While the mission team was away on holiday leave from November 24 to December 1, Curiosity worked to snap images using Mastcam over a six-and-a-half-hour period of time spread across four days. The camera was programmed to take the images from between noon and 2 PM local time to ensure that the lighting was consistent for the eventual panorama.

    The new record 1.8-billion-pixel image. Credits: NASA/JPL-Caltech/MSSS

    NASA explains this holiday break provided a rare moment of downtime for the rover, which typically does not stay in one place long enough to capture so many images from the same vantage point. The resulting 1.8-billion-pixel panorama, which exceeds the rover’s previous record 1.3-billion-pixel image, took ‘months’ to assemble.

    NASA Jet Propulsion Laboratory’s Curiosity project scientist Ashwin Vasavada said:

    While many on our team were at home enjoying turkey, Curiosity produced this feast for the eyes. This is the first time during the mission we’ve dedicated our operations to a stereo 360-degree panorama.

    The public can download a full-resolution version of the 1.8-billion-pixel panorama in JPEG and TIFF formats from NASA JPL’s website here, as well as the 650-million-pixel version from the same link. At its highest resolution, the panorama has a massive 2.43GB file size. The space agency offers lower quality versions with file sizes ranging from 82MB all the way down to 350KB.

    In addition, NASA has an online 360-degree viewer to present the panorama in full screen with a zoom tool.

    Articles: Digital Photography Review (dpreview.com)

  • Irix announces its long-awaited 45mm F1.4 still lens for Canon EF, Nikon F and Pentax K mounts

    Irix has announced the details of its new 45mm F1.4 manual lens for full-frame camera systems.

    The lens was originally teased as a prototype way back in 2017 at The Photography Show. Last year, a cine version of the lens was released, but the still photography version remained to be seen, until today.

    The 45mm F1.4 lens is based around Irix’s Dragonfly design technology, which uses an aluminum-magnesium alloy and composite elements to create a lightweight, but sturdy design that’s weather-resistant thanks to multiple gaskets throughout the lens. The focus ring has a 140-degree throw, a focus-lock feature and offers laser-engraved markings with luminescent paint for easier viewing in low-light environments.

    No launch date or pricing information is available at this time. When the 45mmm F1.4 lens does launch, it will be available for Canon EF, Nikon F and Pentax K camera systems. We have contacted Irix to request more information and will update this article accordingly if and when we receive a response.

    Articles: Digital Photography Review (dpreview.com)

  • Shooting RC jets with the Olympus OM-D E-M1 Mark III

    The Olympus OM-D E-M1 Mark III is capable of shooting at up to 60 fps and tough enough to withstand use in harsh environments in every corner of the world. What better environment to put such a small, powerful and fast camera to the test than a remote control jet airplane convention?

    Join action photographer Scott Rinckenberger as he takes the OM-D E-M1 Mark III to shoot the fascinating world of remote control jet planes at Jet Jam 2020 – held annually near Coachella, California.

    Olympus OM-D E-M1 Mark III at Jet Jam 2020

    $ (document).ready(function() { SampleGalleryV2({“containerId”:”embeddedSampleGallery_1727114353″,”galleryId”:”1727114353″,”isEmbeddedWidget”:true,”selectedImageIndex”:0,”isMobile”:false}) });


    This is sponsored content, created with the support of Amazon and Olympus. What does this mean?

    Articles: Digital Photography Review (dpreview.com)

  • What does the EOS R5 tell us about Canon’s mirrorless plans?

    A prototype of the forthcoming Canon EOS R5, on display at the recent WPPI trade show

    If it wasn’t obvious at the time, it should be clear now that the EOS R and RP don’t represent Canon’s full ambitions for full-frame mirrorless. Following the initial surge of those releases, there’s been an apparent lull while the real work continued. Now that Canon has started to release details of the forthcoming EOS R5, the bigger picture is becoming clearer.

    This is not to downplay the role of those first two cameras. The RP in particular seems to be turning into the camera we thought it might: a competent and aggressively priced first-time full-framer, pitched below the 6D level to entice people into the system.

    But it was very apparent that the R and RP weren’t at the center of Canon’s plans for the RF-mount and we’ve had to wait until now, to see more of Canon’s longer-term strategy.

    The RF lenses have already set out the game plan though. That triumvirate of F2.8 L zooms is clearly not primarily aimed at RP or even R users. The prices and the performance that they’ve shown, along with the use of the widely respected ‘L’ designation, should make that clear.

    Neither the ‘holy trinity’ of F2.8 L zooms, nor the 50 and 85mm F1.2 prime lenses will have been developed primarily for EOS R or RP shooters.

    These lenses are laying the groundwork for a camera designed to appeal to the dedicated enthusiast and professional user.

    The R5 will be a mirrorless 5D

    One thing that’s certain, now that we’ve seen the prototype cameras, is that the inclusion of the number ‘5’ in the R5’s name is no coincidence.

    The 5D line has been important for the company, both in terms of sales and in terms of reputation. The 5D DSLRs help cement the company’s image as the maker of aspirational products for enthusiasts and dependable cameras for working professionals, then extended that to create the first high-end stills/video hybrid camera. Like the ‘L’ designation, Canon is unlikely to risk undermining the values associated with that branding by casually applying it to something less ambitious.

    Canon is unlikely to risk the 5-series branding by applying it to something less ambitious

    The prototype units Canon has put on show also help to make clear that it’s this 5D-using crowd it’s targeting with the R5: the styling cues of the body might come from the EOS R but the control layout is reassuringly 5D-like. Wedding shooters, along with everyone else who got really anxious about such things when the EOS R was launched, will be reassured to hear the R5 will have twin card slots.

    There are certainly plenty of design cues from the EOS R, including that square status panel and the mode button set inside the rear shoulder dial…

    Canon was determined to get it right

    The lag between the announcement of the system and the arrival of its key camera model suggests there was still work that needed to be done.

    Given how much of a head start Sony had already established in full-frame mirrorless with its progressively better a7 cameras, there must have been a temptation for Canon to quickly establish a presence in such a key part of the market. But, rather than launching a rival to the Sony a7R III at the same time Nikon launched its Z7, Canon has kept its powder dry.

    …but that rear-plate scroll wheel, that big, traditional joystick and the arrangement of the two buttons on the right shoulder have much more in common with Canon’s DSLR design.

    This strongly suggests it’s been continuing to work on the technologies underpinning the R5. Whereas the R and RP placed sensors from existing models (the EOS 5D IV and EOS 6D II respectively), in less-expensive bodies, it’s now clear that the R5 will include a series of all-new technologies. And we’d guess at a price tag around the $ 3500 territory that EOS 5D models have been launched at.

    It will feature new-to-Canon technologies

    Canon confirmed to us over a year ago that it was developing an in-body stabilization system for a ‘pro-level’ RF camera, and this is likely to be one of the things still being perfected.

    There’s scope for some misunderstanding in translation, of course, but the senior figures we interviewed seemed to suggest a system that would combine the efforts of in-body and in-lens stabilization, like Panasonic and Olympus do, rather than sharing the work by letting in-lens stabilization take over some of the work from the in-body mechanism, per Sony and Nikon.

    Canon has a history of launching new systems by starting with the middle model. The launch model of the EF mount, the EOS 650, wasn’t an especially high-end offering.

    While Canon has decades of experience of in-lens stabilization, it doesn’t have any prior experience of combining lens and sensor-shift IS. This is clearly a technology Canon wanted to get absolutely right before launching a 5D-level camera, rather than delivering a standalone IBIS system and then using the promise of combined IS to entice people to upgrade to an R5 Mark II.

    It will push video capabilities forward

    The EOS 5D II established the idea of the DSLR as a video device. It wasn’t quite the first video DSLR but with its Full HD capability and full-frame sensor, it was the one that ended up in the hands of would-be videographers the world over. The Mark III added a little polish to this but didn’t really push things forward.

    But one of the undeniable advantages mirrorless offers over DSLRs is that you don’t have a mirror that needs to be moved out of the way before you can start recording. This, in turn, helps give a more coherent stills and video shooting experience, making it easier for photographers to adapt to shooting sequences of moving pictures, rather than just stills.

    So a 5D-level mirrorless camera would be the perfect time to make a spiritual successor to the 5D Mark II and Canon is talking in terms of 8K capture.

    The potential benefits of 8K apply to people watching in 4K, just as there were benefits to 4K capture before widespread adoption of 4K displays

    You may not think you need 8K, if that’s what the camera ends up outputting. It’s true that the limits of human vision at sensible viewing distances take us into the realms of diminishing returns, but many of the potential benefits of 8K apply to people watching in 4K, just as there were benefits to 4K capture before widespread adoption of 4K displays.

    The first is the ability to crop in, giving scope for adding panning or zooming movement into locked-off shots. This is hugely useful in terms of giving flexibility at the edit stage, particularly for single camera setups that an R5 is likely to be used for.

    But the other option is to capture at 8K and output it as perfectly oversampled 4K, since you need to capture twice the resolution to accurately describe all the detail that a 4K video can show. It may be that this is what Canon is referring to 8K capture with 4K output, but even this would be an impressive step forward.

    I won’t call it a flagship

    So what we know from the announced details and what we can deduce from the RF lenses that have been launched is that the 5R will aim to be a ‘Super 5D’: with the addition of in-body IS and advanced video making it perhaps the biggest generational leap forward for ‘5’ level cameras since the introduction of Full HD video capture.

    The EOS R5 promises to match the 1D X III in terms of its 20fps frame rate, but it’s still the 1D series that’s the real flagship in Canon’s lineup.

    But I’m still loath to call it a flagship. 5D cameras are important to Canon and certainly help set public perception of the brand, but it’s the 1D-series that has entrenched the company’s position on the sidelines of sports across the world.

    The R5 is likely to include some of the AI-trained autofocus know-how developed for the EOS-1D X Mark III, and it’s likely to be the top dog in the RF lineup for the foreseeable future. But the sheer amount of power offered by the 1D X III in mirrorless mode suggests we may be only a single generation away from an RF-mount 1D.

    Articles: Digital Photography Review (dpreview.com)