RSS
 

Posts Tagged ‘Firmware’

Fujifilm rolls back firmware 4.0 for the Fuji X-T2 due to ‘malfunctions’

18 May

Last week, Fujifilm released firmware version 4.0 for the Fuji X-T2, which brought the two-year-old camera almost on par with the newly-released Fuji X-H1. The update was hailed as yet another phenomenal example of Fuji’s ‘Kaizen’ policy, but we may have all jumped the gun. Today, Fuji rolled back the update after users who had updated discovered some major issues with v4.0.

The roll back was announced in a note on Fuji’s website, where General Manager Toshi Iida writes:

It has been brought to our attention that there are a few issues with the recently released X-T2 ver 4.00 firmware update. We have therefore taken the difficult decision to remove the update from the website until we are confident that all the issues have been completely fixed.

We deeply apologize for any inconvenience and disappointment this has caused.

The malfunctions listed include issues converting RAW files captured by the X-T2 before firmware 4.0 was released, live view flickering under certain conditions, and the rare chance of a “hang-up” while shooting.

The good news is that Fuji has “identified the problem” and are planning to re-release the much-anticipated update “as soon as we can.” The bad news: for now, it’s highly recommended you “update” to version 4.01, which is actually a roll back to the stable version 3.0.

Finally, due to this hiccup, Fujifilm has also announced that planned firmware updates for the GFX 50s, X-H1, and X-Pro2 that were due out later this month have been delayed so Fuji can more thoroughly test them.

Read the full release notes for this roll back below, or visit the Fujifilm website to download Firmware v4.01.

Release Notes

To all loyal Fujifilm X Series customers and photographers,

It has been brought to our attention that there are a few issues with the recently released X-T2 ver 4.00 firmware update. We have therefore taken the difficult decision to remove the update from the website until we are confident that all the issues have been completely fixed.

We deeply apologize for any inconvenience and disappointment this has caused.

Sincerely yours,

Toshi Iida
General Manager
Optical Device and Electronic Imaging Products Division
Fujifilm Corporation, Tokyo, JAPAN

Details of the Problem

We have discovered malfunctions in the firmware ver.4.00 released on May 8 2018. They are as follows:

  1. When RAW files, which were taken by X-T2 (before firmware ver.4.00), are converted in camera (ver.4.00) or by “FUJIFILM X RAW STUDIO”, they are not converted properly.
  2. When pressing the shutter button halfway under certain conditions, the live view can flicker.
  3. In rare cases, a hang-up can occur.

We have identified the cause and plan to release the upgraded firmware to address the malfunctions as soon as we can.

In the meantime, for customers who have upgraded the firmware to ver.4.00, the firmware ver.4.01*, whose functions are same as ver.3.00, have been posted on our website. Please download it and update your camera.

  • *Ver.4.01 doesn’t include the additional functions of ver.4.00.

Again, we sincerely apologize for the inconvenience caused.

[ X-T2 Ver.4.01 Download page ]

  • X-T2 Camera Body Firmware Update Ver.4.01

Note

We announced the firmware update for GFX 50S, X-H1 and X-Pro2, which was planned in May 2018, on the Global website on 12 Apr 2018. However, it will be postponed because we need more time to check the firmware for the three models. For detail, we will inform you later.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm rolls back firmware 4.0 for the Fuji X-T2 due to ‘malfunctions’

Posted in Uncategorized

 

Major Fuji X-T2 firmware update adds internal F-log recording, slow-mo, and more

09 May

Fujifilm has released a major firmware update for the Fuji X-T2 that may make it even harder for owners of that camera to justify the jump to the newly-released Fuji X-H1. As we mentioned in our review—and as Chris and Jordan pointed out in Episode 2 of DPRTV—the price of the X-H1 makes it a tough sell to owners of the X-T2 who have been looking to upgrade. And now, with Firmware Version 4.0, those users may not want to upgrade anymore anyhow.

Version 4.0 replaces version 3.0 (imagine that), and adds nine new features in all. Some of the video highlights include the ability to record 4:2:0 F-log directly to the SD card, and the addition of a 1080p 120fps slow motion mode. There are also major improvements to the Phase Detect AF algorithm, with the low-light limit dropping from +0.5EV to -1.0EV, the maximum aperture increasing from F8 to F11, and “major improvements” in AF-C performance while operating zoom. Finally, a focus bracketing feature has been added that lets you bracketing up to 999 frames in intervals of focus shift between 1 and 10.

There’s no word on whether the X-T2 gains the improved video processing of the X-H1 (it doesn’t gain 200Mbps capture), but this is one of the things we’ll be checking when we re-assess the X-T2 review in the coming weeks.

To learn more about this update or download it for yourself (and if you own an X-T2, you definitely need to download it ASAP), read the release notes below and then pay Fuji’s support website a visit.

Release Notes:

The firmware update Ver.4.00 from Ver.3.00 incorporates the following issues:

  1. Addition of “Focus Bracketing”
    The update will enable the photographer to shoot focus distance bracketing up to 999 frames. When the photographer starts shooting, the focal location is shifted with each activation of the shutter by the step of focus shift set from 1 to 10.
  2. Compatible with the newly developed cinema lens FUJINON MKX18-55mm T2.9 lens and FUJINON MKX50-135mm T2.9 lens
    • Aperture information can be displayed on the monitor. The upgrade allows users to select T-stop or F-stop.
    • The upgrade allows users to check the focus distance with the distance indicator shown on the monitor.
    • Automatically corrects the distortion and the color/brightness shading.
    • Camera automatically calculate the White Balance based on the lens position and deliver the color expressions with Film Simulation modes.
  3. Enlarged and customizable indicators or information
    The upgrade allows users to enlarge indicators and information in the viewfinder and/or LCD monitor. This upgrade will also enable users to customize the location of where the information is shown on the display.
  4. Addition of F-log SD card recording
    The upgrade allows users to record F-log movie data into their SD card.
  5. Addition of 1080/120P high-speed video mode
    The upgrade allows users to shoot 1080/120P high-speed video (1/2, 1/4 and 1/5 speed slow motion), ideal for recording spectacular slow-motion footage.
  6. Enhanced Phase Detection AF
    Latest updates to the AF algorithm provide the following performance enhancements:
    • The low-light limit for phase detection autofocus has been improved by approximately 1.5 stops from 0.5EV to -1.0EV, raising the precision and speed of autofocus in low-light environments.
    • The range at minimum aperture has been expanded from F8 to F11. For example, even when using the XF100-400mmF4.5-5.6 R LM OIS WR with the tele converter XF2X TC WR, phase detection autofocus can now be used.
    • Major improvements have been made to the AF-C performance while operating the zoom, which provides major benefits when shooting sports and other scenarios in which the subjects moves unpredictably.
    • Finely-detailed surface textures of wild birds and wild animals can now be captured at high speed and with high precision as a result of improvement in phase detection autofocus.
  7. Addition of “Flicker Reduction”
    For enhancing the quality of indoor sports photography, the upgrade allows users to reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources.
  8. Addition of “Select Folder” and “Create Folder”
    Enables the user to choose the folder in which subsequent pictures will be stored. And also enable to enter a five-character folder name to create a new folder in which to store subsequent pictures.
  9. New functions are added to store and read of camera settings by FUJIFILM X Acquire
    Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. With “FUJIFILM X Acquire” (ver.1.7 or newer), CUSTOM REGISTRATION/EDIT settings are also stored and read.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Major Fuji X-T2 firmware update adds internal F-log recording, slow-mo, and more

Posted in Uncategorized

 

Hasselblad firmware updates for X1D and H6D add a host of new features

09 May

Hasselblad has added a bunch of new features to the X1D and H6D in firmware updates released yesterday. Version 1.21 adds a white balance sampler tool, audio notifications, tethered image support, the option to zoom in to 100% with a single button press when reviewing captured images, and more to both models, in addition to a few model-exclusive updates.

The X1D gets exposure bracketing for the first time, with the option to use 0.3EV, 0.5EV, 1EV, 2EV or 3EV steps across 2, 3, 5, 7 or 9 frames. Users can choose the sequence of the frames and whether the aperture or shutter speed is used as the variable in manual exposure mode. A new intervalometer has also been added, allowing users to create timelapse sequences with no limit to the number of frames recorded. The mode offers fixed lengths of 2 to 99 frames, but also a mode that will continue shooting until the action is stopped manually. Images can be recorded with intervals of 2 to 60 seconds.

Handling changes to the X1D with the latest firmware included adding the ability to scroll through recorded images while zoomed in when using the EVF, and a mode that automatically zooms in to the area beneath the focus point immediately after picture is recorded. There is now an option to set a shutter speed limit when using Auto ISO, a reworking of the crop mode cycle that makes finding the one you want quicker, and autofocus support for all lenses from the H system (other than the 120mm macro) when the camera is fitted with the XH adapter.

The biggest change for H6D users is the introduction of custom profiles that will make it quicker to switch between configurations of settings for different shooting conditions. Seven profiles can be recorded for individual shooters or for when more than one photographer uses the same camera.

For more information, and to download the new firmware, visit the Hasselblad website.

Press Release

Hasselblad Firmware Update 1.21 for X1D and H6D

Hasselblad’s 1.21 Firmware Update demonstrates their commitment to technological innovation with new features for the X1D and H6D

With the 1.21 Firmware Update, Hasselblad conveys their dedication to continuously develop and enhance its world-renowned camera systems. This most recent firmware update for the X1D and H6D adds to the photographer’s ease in not only capturing one’s shot, but their options for creativity as well.

Hasselblad is pleased to announce new updates for both the X1D and H6D including a White Balance Tool, allowing the photographer to set the colour temperature and tint directly on a photograph when shooting. These values can then be applied to all following images until the setting is turned off.

New features specific to the X1D include an Interval Timer and Exposure Bracketing. Using the Interval Timer, photographers can further their creativity with time-lapse shots. Exposure Bracketing gives users options in their exploration of varied exposure settings, capturing up to 9 frames with customisable sequences of bracketing exposures.

A highlight particular to the H6D allows for the user to create seven customisable profiles. By accessing the General Settings Menu on the main display, the user can easily navigate to the Profiles Menu and save the current camera settings to one of the seven profiles. With these preset settings customised by the user, the photographer has the tools to swiftly change camera settings without losing time, and ultimately, their shot.

Firmware updates are available from the “My Hasselblad > Downloads” section online at Hasselblad.com. Users can update their firmware simply by downloading the “.cim” file to an SD card and selecting Firmware Update from the Service Menu on their camera.

X1D and H6D: v1.21.0

  • White balance tool
  • Audio notifications
  • Tethered image import
  • Reset all settings: Option to disable reset of profiles
  • Power Off symbol while shutting down
  • Improved feedback to user when missing card in backup mode
  • Browse Zoom: Long-hold to zoom in to 100% or out to full image (X1D: Hold the AF-D/AE-L button; H6D: Hold the True Focus button)

X1D: v1.21.0

  • Interval timer
  • Exposure bracketing
  • New setting: Shutter speed limit for Auto ISO, P- and Full Auto Mode
  • Custom Button for Crop Modes – Replace “Crop Mode Cycle” with “Crop Mode Next” and “Crop Mode Previous”
  • Zoom into coordinates of the focus point for the image just taken
  • Browse images and pan when zoomed-in in EVF with swipe on touch-pad area on display
  • Start live view automatically in EVF after browsing on rear LCD
  • X1D – Audio playback through camera speaker during video playback
  • Auto focus support for all HC/HCD Lenses (except HC120 Macro) when using the XH Lens Adapter

H6D: v1.21.0

  • Profiles
  • HDMI – Pan in zoomed-in with touch-pad area on display

New Lens Firmware HC-HCD 19.0.3 and XCD 0.5.20:

Hasselblad is also pleased to announce new firmware for XCD, HC & HCD lenses including autofocus support for the following Hasselblad H System lenses when used on the X1D camera with an XH adapter: HCD24, HC150, HC150N, HC210, HC300, HCD35-90 and HC50-110. For further details, please see release notes at https://www.hasselblad.com/support/

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Hasselblad firmware updates for X1D and H6D add a host of new features

Posted in Uncategorized

 

Fujifilm releases firmware updates for X-H1, X-E3, and X100F

28 Apr

It looks like Fujifilm’s software engineers have been working overtime the past few weeks. Today, the company has released firmware updates for three of its X-series cameras: the brand new X-H1, as well as the older X-E3 and X100F. In all cases, the new software addresses some user-reported bugs and improves camera performance.

Version 1.20 of the XE-3 firmware is the biggest of the three and comes with the following improvements:

  • Support for Fujifilm X Raw Studio: camera users can now convert Raw files, including batch processing, with the free Fujifilm X Raw Studio software.
  • Backup and restoring of camera settings via Fujifilm X Acquire: when connecting the camera to a computer via USB, photographers can now use the Fujifilm X Acquire software to backup camera settings to a file and restore them. It is also possible to copy settings from one camera to another.
  • Compatibility with the Fujinon XC15-45mm F3.5-5.6 OIS PZ lens: when using this lens the focus ring function now switches automatically. In focus modes S and C it is used for Fine Zoom adjustment. In focus mode M it controls the manual focus. In addition the zoom position of the lens is now memorized when the camera is powered off and maintained while switching into playback mode.
  • Improved radio flash controller operation: users can now shoot with compatible third party studio flash units in high speed sync. or TTL mode, using radio controllers.
  • Enlarged and customizable display indicators and information: users can now enlarge indicators and shooting information displayed in the viewfinder or on the LCD monitor. You will also be able to customize the location of the information on the display.
  • Enhanced Bluetooth connectivity via Camera Remote app: with the Fujifilm Camera Remote app user can now update the camera firmware via bluetooth and remote-trigger compatible cameras.

Version 2.10 of the X100F firmware offers the same capability to enlarge and customize display information and backup and restore of camera settings via X Acquire as the update for the XE-3.

The update to firmware version 1.02 for the Fuji X-H1 is fairly minor, simply fixing a bug that could cause image files to be overwritten when an image folder is selected through the Select Folder function in the Setup menu.

Follow the corresponding links above to get the latest versions for yourself.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm releases firmware updates for X-H1, X-E3, and X100F

Posted in Uncategorized

 

Sony fixes a7 lll ‘blinking pixels’ video issue with firmware 1.01 update

19 Apr

Sony has released the first firmware update for the Sony a7 III—version 1.01—and it was specifically released to solve a “blinking pixel” issue that showed up when recording video footage while using certain settings.

The flickering pixels would appear along the base of footage “during XAVC S 4K (PAL 25p) recording (depending on the combination of camera settings).” Additionally, the update resolves a problem that could occasionally make the rear touch screen stop working, and Sony says the camera’s system should run more smoothly with the new firmware as well.

For more information and to download V1.01 for yourself, visit this support page on the Sony website.

Release Notes

ILCE-7M3 System Software (Firmware) Update Ver.1.01 (Windows)

Resolves a “blinking pixels” phenomenon at the bottom edge of the image during XAVC S 4K (PAL 25p) recording (depending on the combination of camera settings)

Applicable Models

This information is for the following models: ILCE-7M3

About this download

Benefits and improvements

  • Resolves a “blinking pixels” phenomenon at the bottom edge of the image during XAVC S 4K (PAL 25p) recording (depending on the combination of camera settings)

  • Resolves an issue where the touch panel could occasionally become unresponsive

  • Improves the overall stability of the camera

File Info

File Name: ILCE-7M3 System Software (Firmware) Update Ver.1.01 (Windows)

File Version: 1.01

File Size: 282 MB (296,352,960 bytes)

Release Date: 18/04/2018

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Sony fixes a7 lll ‘blinking pixels’ video issue with firmware 1.01 update

Posted in Uncategorized

 

Fujifilm X-T20 firmware update improves subject tracking, enhances touchscreen functionality

13 Apr

In addition to the six other firmware updates released today, Fujifilm also released the previously announced upgrade to the X-T20. The most interesting features include:

  • Improved AF tracking: the company says that the camera can track moving subjects at twice the speed of the previous firmware. The X-T20 can now track subjects 50% smaller than before.
  • New touchscreen controls: Users can now move the AF area by touch when in ‘focus zoom’ mode. The Quick Menu can now be operated by touch, as well.
  • Exposure improved with face detection
  • RGB and highlight warnings now available

Version 2.00 of the X-T20 firmware can be downloaded here.

Here’s the full list of improvements:

The firmware update Ver.2.00 from Ver.1.11 incorporates the following issues:

1. New AF tracking algorithm for moving subjects
Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware. In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before.

2. Enhanced touch screen operation
The firmware update will add some of the touch screen operation features which are currently available on the FUJIFILM X-E3. These touch screen features include:
1) The Auto Focus area can be moved when in focus zoom with flick operation.
2) Pinch-in/out operation in playback mode will be updated to go from full-frame playback to multi-frame playback (Nine-frame view and Hundred-frame view)
3) Select the frame in multi-frame playback with tap or drag operation or return to full-frame playback by double-tapping
4) Q (Quick) menu selection
5) Input character with touch key-board (*1)
*1?Except for some functions. (ex. SSID input)

3. Support “FUJIFILM X RAW STUDIO”
After connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. Fast batch processing will also be available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free.

4. Support for backup/restore of camera settings via FUJIFILM X Acquire
Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.
*Settings other than date and custom white balance can be backup and restored.

5. Compatible with the newly developed FUJINON XC15-45mmF3.5-5.6 OIS PZ lens
The upgrade will add compatibility for the newly developed FUJINON XC15-45mmF3.5-5.6 OIS PZ lens.
1) When changing the focus mode (AF/MF), the focus ring function (fine zoom adjustment, manual focus) automatically switches.
* Focus ring function when focus mode is “S” or “C”?Fine Zoom adjustment.
* Focus ring function when focus mode is “M”?Manual focus.
2) Memorize the lens zoom position when power off and return to the position when power on
3) Maintain the lens zoom position in playback mode to shorten the startup time for the next shooting

6. Improve radio flash controller usability
The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.

7. RGB histogram display and highlight warning
If you press the function button in the histogram, RGB histogram and highlight warning (high brightness portion will blink) will be displayed.

8. Enlarged and customizable indicators or information
The upgrade allows users to enlarge indicators and information in the viewfinder and/or LCD monitor. This upgrade will also enable users to customize the location of where the information is shown on the display. When enlarged display, some icons are not displayed like distance indicator, focus frame, focus mode, focus warning, microphone/remote release, AF+MF, button lock and sound and flash indicator.

9. AE optimization when face detection

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm X-T20 firmware update improves subject tracking, enhances touchscreen functionality

Posted in Uncategorized

 

Fujifilm to release spring firmware updates for six cameras

12 Apr

Fujifilm is releasing firmware updates, both large and small, for six of its X-series cameras, with the X-T2 receiving the most significant changes. These updates will begin rolling out this month and will continue through May. Some of the highlights include:

GFX 50S

  • Compatibility with new GF 250mm F4 R LM OIS WR lens
  • New flicker reduction feature
  • Large Indicators Mode for LCD and viewfinder

X-H1

  • Focus bracketing
  • Enlarged/customizable indicators in viewfinder and LCD
  • Enhanced phase detection during video recording; more phase detection AF area options for still shooting
  • Enhanced Bluetooth connectivity

X-T2

  • Focus bracketing
  • Enlarged/customizable indicators in viewfinder and LCD
  • F-log recording to SD card
  • 1080/120p high speed mode
  • Improved Phase Detect AF performance
  • Flicker reduction

X-Pro2

  • Enlarged/customizable indicators in viewfinder and LCD
  • Improved Phase Detect AF performance
  • Flicker reduction

X-E3

  • Enlarged/customizable indicators in viewfinder and LCD
  • Compatibility with XC 15-45 F3.5-5.6 OIS PZ lens
  • Improved radio flash controller usability
  • Supports FUJIFILM X RAW STUDIO

X100F

  • Enlarged/customizable indicators in viewfinder and LCD

Press Release

New Firmware Updates for GFX, X-H1, X-T2, X-Pro2, X-E3 and X100F

Fujifilm will release new firmware updates for the FUJIFILM GFX 50S, X-H1, X-T2, X-Pro2, X-E3 and X100F. Updates will vary by model and are expected in April 2018 and May 2018.

1. FUJIFILM GFX 50S (Ver.3.10) – Available in May 2018

• Compatible with the newly developed FUJINON GF250mmF4 R LM OIS WR lens including “Focus Preset,” “AF-L” and “AF-ON”.
• Addition of “Flicker Reduction” to reduce flicker in both pictures and display when shooting under fluorescent lighting.
• Addition of “Select Folder” and “Create Folder” allowing users to choose the folder that images are stored in and to create a new folder.
• New “Large Indicators Mode” enabling users to enlarge indicators and information in the viewfinder and/or LCD monitor and to customize the location of where the information is shown on the display.
• Addition of Fn button support for “35mm Format Mode” for quick setting changes.

2. FUJIFILM X-H1 (Ver.1.1.0) – Available in May 2018

• Addition of Focus Bracketing allows the photographer to shoot focus distance bracketing of up to 999 frames.
• Compatible with new cinema lenses FUJINON MKX18-55mmT2.9 and FUJINON MKX50-135mmT2.9.
• Enlarged and customizable indicators and information in the viewfinder and/or LCD monitor. Users can also customize the location of where information is shown on the display.
• Enhanced Phase Detection AF during movie recording.
• Expanded Phase Detection AF Area options during still shooting.
• Enhanced Bluetooth® connectivity with FUJIFILM Camera Remote app.
• Addition of Fn button support for “IS Mode”.

3. FUJIFILM X-T2 (Ver.4.0.0) – Available in May 2018

• Addition of Focus Bracketing allowing the photographer to shoot focus distance bracketing of up to 999 frames.
• Compatible with new cinema lenses FUJINON MKX18-55mmT2.9 and FUJINON MKX50-135mmT2.9.
• Enlarged and customizable indicators and information in the viewfinder and/or LCD monitor. Users can also customize the location of where information is shown on the display.
• Addition of F-log SD card recording.
• Addition of 1080/120P high-speed video mode ideal for recording slow motion footage.
• Enhanced Phase Detection AF to improve performance in various shooting environments.
• Addition of “Flicker Reduction” to reduce flicker in both pictures and display when shooting under fluorescent lighting.
• Addition of “Select Folder” and “Create Folder” allowing users to choose the folder that images are stored in and to create a new folder.

4. FUJIFILM X-Pro2 (Ver.5.0.0) – Available in May 2018

• Enlarged and customizable indicators and information in the viewfinder and/or LCD monitor. Users can also customize the location of where information is shown on the display.
• Enhanced Phase Detection AF to improve performance in various shooting environments.
• Addition of “Flicker Reduction” to reduce flicker in both pictures and display when shooting under fluorescent lighting.
• Addition of “Select Folder” and “Create Folder” allowing users to choose the folder that images are stored in and to create a new folder.

5. FUJIFILM X-E3 (Ver.1.2.0) – Available in Late April 2018

• Supports FUJIFILM X RAW STUDIO.
• Support for backup/restore of camera settings via FUJIFILM X Acquire when the camera is connected to a computer.
• Compatible with the newly developed FUJINON XC15-45mmF3.5-5.6 OIS PZ lens.
• Improved radio flash controller usability allowing users to shoot with compatible third party studio flash in high speed sync or TTL mode via a radio controller.
• Enlarged and customizable indicators and information in the viewfinder and/or LCD monitor. Users can also customize the location of where information is shown on the display.
• Enhanced Bluetooth® connectivity with FUJIFILM Camera Remote app.

6. FUJIFILM X100F (Ver.2.1.0) – Available in Late April 2018

• Enlarged and customizable indicators and information in the viewfinder and/or LCD monitor. Users can also customize the location of where information is shown on the display.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm to release spring firmware updates for six cameras

Posted in Uncategorized

 

Fujifilm GFX 50S firmware update adds Focus Bracketing and 35mm Format Mode

14 Mar

Earlier today, Fujifilm released firmware version 3.0 for its GFX 50S medium-format camera. And with the update come two new features: Focus Bracketing and 35mm Format Mode.

Focus Bracketing enables focus distance bracketing for up to 999 frames, shifting the focal location with each shutter activation at a scale from 1 to 10. The new 35mm Format Mode, meanwhile, results in the camera using the central 36 x 24mm portion of the sensor, producing 30.5MP Raw and JPEG images.

“When using 35mm format adapters,” the company explains in its changelog, “it will be easier to adjust the image size to 35mm format image circle lenses by changing the setting.”

The GFX 50S v3.0 firmware update can be downloaded now from Fujifilm’s website. Additionally, Fujifilm has also released a compatibility update for the H Mount Adapter G accessory.

Update Notes

GFX 50S Camera Body Firmware Update Ver.3.00

Addition of “Focus Bracketing”

The update will enable the photographer to shoot focus distance bracketing up to 999 frames. When the photographer start shooting, the focal location is shifted with each activation of the shutter by the step of focus shift set from 1 to 10.

Addition of “35mm Format Mode”

The update will enable the photographer to shoot central 36.0mm x 24.0mm (30.5M) cropped images as both JPEG and RAW files. When using 35mm format adapters, it will be easier to adjust the image size to 35mm format image circle lenses by changing the setting.

H MOUNT ADAPTER G” new firmware

The firmware update will expand the compatibility for the “H MOUNT ADAPTER G” accessory. Regarding the compatibility of lenses and accessories with H MOUNT ADAPTER G, refer to this URL.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Fujifilm GFX 50S firmware update adds Focus Bracketing and 35mm Format Mode

Posted in Uncategorized

 

Nikon releases new firmware for nine cameras, mostly AF-P lens support

04 Mar

Nine Nikon DSLR models are getting new firmware to fix a few issues users have been encountering, particularly when using AF-P lenses. Updated models include the D4, D4s, Df, D800, D800E, D810, D810A, D7100, and D7200.

The whole lot of them received these fixes:

Added the following supports for AF-P lenses:

  • If the standby timer expires after focusing, the focus position will no longer change when the timer is reactivated.
  • When focus is adjusted by rotating the lens focus ring, the focus indicator in the viewfinder (and in live view, the focus point in the monitor) now flash to indicate when infinity or the minimum focus distance is reached.

The D4, D4s, Df, D800 and D800E received the following fixes:

Added support for AF-P DX lenses.

And the D4, Df, D800 and D800E also benefit from:

When photos were taken using Camera Control Pro 2 after Custom Setting d10 (Exposure delay mode) was enabled in the CUSTOM SETTING MENU, the software would sometimes mistakenly display a message stating that no photo could be taken.

Finally, the Nikon D810 and D810A received fixes to their microphone operation and multiple exposure modes, while the D7100 and D7200 get updates that fix an issue of incorrect exposures when E-type lenses are used in live view mode.

For more information on all of these updates, or if you want to get your Nikon DSLR up to the latest firmware version, visit the Nikon firmware download web page.

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Nikon releases new firmware for nine cameras, mostly AF-P lens support

Posted in Uncategorized

 

Olympus offers major firmware update for OM-D E-M1 II, E-M5 II and Pen-F

28 Feb

Olympus has announced updates for its OM-D E-M1 Mark II, OM-D E-M5 Mark II and Pen-F cameras in the lead up to CP+ 2018. All three cameras get a new Bleach Bypass Art Filter and added support for the Panasonic Leica 200mm F2.8 Power OIS lens, but the improvements go beyond that for the individual camera models.

The E-M1 II’s list of updates is the longest. Firmware 3.0 brings improvements to Pro Capture Mode, increasing the pre-shutter buffer depth from 14 to 35 frames. Pro Capture Mode H can also now be used with any Four Thirds or Micro Four Thirds lens. Focus Stacking mode now works with the 12-100mm F4 Pro, and the camera will now provide in-body distortion correction for the 8mm F1.8 Fisheye Pro.

Olympus OM-D E-M5 II firmware 4.0 adds the focus stacking feature found on the
TG-5 and E-M1 II

Other E-M1 II improvements include the ability to set smaller AF target points in S-AF and C-AF, a 100% magnification option in image playback and a Flicker Scan feature to help choose a shutter speed that avoids flickering from problematic light sources. Olympus also says that C-AF performance has been improved overall, as has stabilization in video shooting, among other minor feature updates.

Olympus OM-D E-M5 II firmware 4.0 adds the focus stacking feature found on the TG-5 and E-M1 II. In this mode, eight images are captured as focus is shifted to create a composite final image with greater depth of field.

Firmware 3.0 for the Pen-F adds the ability to save Monochrome and Color Profile Control settings to the camera by way of a computer. Shading effects are also added to Color Profile Control and Color Creator.

For the full list of improvements, see the press release below or head to Olympus’ website.

YOUR UPGRADE AWAITS: OLYMPUS UNLEASHES POWERFUL NEW FIRMWARE FOR ITS OM-D AND PEN CAMERAS

New Functions and Improved Performance Are Delivered Through Firmware Version 2.0 for OM-D E-M1® Mark II, Version 3.0 for PEN-F®, and Version 4.0 for OM-D E-M5 Mark II

CENTER VALLEY, Pa., February 28, 2018—Today Olympus announces a series of new firmware updates that are available immediately for several of its latest interchangeable lens cameras. The firmware upgrades include Version 2.0 for the flagship Olympus OM-D E-M1 Mark II, Version 3.0 for the Olympus PEN-F, and Version 4.0 for the Olympus OM-D E-M5 Mark II.

Olympus is dedicated to providing ongoing product functionality and performance improvements to deliver cameras that users can depend on long after their initial purchase. The latest firmware updates are designed to bolster Olympus’s interchangeable lens cameras with the latest functionality, improved performance, and expanded creative options. Many of the firmware updates were implemented in response to users’ requests.

For example, Firmware Version 3.0 for the PEN-F adds the ability to save the settings of the Monochrome and Color Profile Control from the user’s computer onto the camera. Firmware Version 4.0 for the OM-D E-M5 Mark II adds the Focus Stacking function available on the OM-D E-M1 and E-M1 Mark II. In addition to these upgrades, videographers will now have access to the Look Up Table (LUT) file for the OM-D E-M1 Mark II and the OM-D E-M5 Mark II, allowing for advanced control and optimal color grading using DaVinci Resolve®.

Other new features include improved Pro Capture Mode functionality in the OM-D E-M1 Mark II’s Firmware Version 2.0, while the PEN-F’s Firmware Version 3.0 includes shading effects that were previously only available in Monochrome Profile Control and are now available in Color Profile Control and Color Creator.

Main Features

OM-D E-M1 Mark II Firmware Version 2.0 Details

1. Improved Pro Capture Mode functionality
Pro Capture Mode provides lag-free shooting so users can capture high-quality, full-resolution images at precise moments without compromise. Pro Capture buffers a running series of JPEG and RAW images when users press the shutter release halfway. With Firmware Version 2.0, the maximum number of pre-shutter frames that can be recorded once the shutter button is fully pressed has increased from 14 to 35.

Additionally, a new display icon shows users that they have initiated Pro Capture Mode and the camera is currently buffering frames.

All attachable lenses are now compatible with Pro Capture H (focus locks after first image is buffered).

Lens Pro Capture L Pro Capture H
Olympus Micro Four Thirds System standard lenses Yes Yes
Other Micro Four Thirds System standard lenses No Yes
Four Thirds System standard lenses No Yes
Lenses without electrical contacts (MF only) Yes Yes

2. Focus Stacking now supports the M.Zuiko Digital ED 12–100mm F4.0 IS PRO
Firmware Version 2.0 now allows the M.Zuiko Digital ED 12–100mm F4.0 IS PRO to support in-camera focus stacking. Additionally, seven other lenses support focus stacking, including the M.Zuiko Digital ED 8mm F1.8 Fisheye PRO, ED 30mm F3.5 Macro, ED 60mm F2.8 Macro, ED 300mm F4.0 IS PRO, ED 7–14mm F2.8 PRO, ED 12–40mm F2.8 PRO, and ED 40–150mm F2.8 PRO.

3. Small AF Target setting added to S-AF and C-AF
In response to feedback from Olympus users looking for a greater level of precision when choosing a specific AF target, Small AF Targets have been added to the single target (1-point) AF area.

4. In-body Fisheye Correction when using M.Zuiko Digital ED 8mm F1.8 Fisheye PRO
Fisheye Distortion Correction is now available in-camera so that the M.Zuiko Digital ED 8mm F1.8 Fisheye PRO can be used as a wide-angle lens without the fisheye effect. Fisheye Correction effects can be viewed by the user in real time on the rear monitor or EVF before shooting.

5. The magnify setting now offers a 100-percent enlargement ratio for use during image playback
Due to Olympus user feedback, pixel size display has been added to the magnification ratio options, making it possible to review images at a 1:1 pixel ratio.

6. New Flicker Scan function removes flickering when using the electronic shutter
The Flicker Scan function allows users to preview the scene and choose the proper shutter speed to avoid flickering, a phenomenon that is common when using the camera’s electronic shutter under fluorescent or LED light sources.

Other Improvements

  • Continuous AF (C-AF) performance has been improved.
  • AF response has been improved when using back-button focus AF settings with the AEL/AFL button.
  • IS performance has been improved when shooting video, enabling more natural camera work (IS-equipped lenses require simultaneously released firmware update).
  • Tethered shooting responsiveness and stability using Olympus Capture has been improved, providing an easier shooting workflow.
  • The remaining battery level icon has been fine-tuned.

PEN-F Firmware Version 3.0 Details

1. Monochrome and Color Profile Control settings can be saved onto camera via computer
It is now possible to save Monochrome and Color Profile Control settings in images recorded on the PEN-F to the camera via a computer. Using the latest Olympus Digital Camera Updater (Ver. 2.1), simply select the image with the profile you want to use and save the settings to the camera.

2. Shading effects in Monochrome Profile Control are available in Color Profile Control and Color Creator
Due to popular demand, shading effects have been added to Color Profile Control and Color Creator for a wider range of photographic expression.

OM-D E-M5 Mark II Firmware Version 4.0 Details

1. In-Camera Focus Stacking function
The Focus Stacking function available on the Tough TG-5 and OM-D E-M1 Mark II is now available on the OM-D E-M5 Mark II. The focus is shifted in half-pixel increments while capturing eight images, which are then composited to form a single image that is in focus from the foreground to the background. A total of eight lenses are supported (the same lenses supported by OM-D E-M1 Mark II Firmware Version 2.0).

Common Features for OM-D E-M1 Mark II, PEN-F, and OM-D E-M5 Mark II

1. New Bleach Bypass Art Filter option
The Bleach Bypass Art Filter included in the OM-D E-M10 Mark III (released in September 2017) is now available with these firmware updates. This option replicates the bleach bypass effect used to develop film creating images with a beautiful metallic sheen.

2. Support for Panasonic LEICA® DG ELMARIT 200mm/F2.8/POWER O.I.S. interchangeable lens
This firmware update improves the compatibility with the Panasonic LEICA DG ELMARIT 200mm/F2.8/POWER O.I.S. (H-ES200) interchangeable lens.

Please visit the following URL for more details on the firmware updates: getolympus.com/firmware

Movie-exclusive picture mode: “Flat” LUT file release
An LUT file is released for movies recorded in the movie-exclusive picture mode “Flat” with the OM-D E-M1 Mark II and E-M5 Mark II. This file converts recorded videos to BT.709 in DaVinci Resolve from Blackmagic Design Pty. Ltd. for color grading.

Please visit the following URL for more details: getolympus.com/firmware

Articles: Digital Photography Review (dpreview.com)

 
Comments Off on Olympus offers major firmware update for OM-D E-M1 II, E-M5 II and Pen-F

Posted in Uncategorized

 
« Older Entries
Newer Entries »