Sink « 360Photography

RSS

Posts Tagged ‘Sink’

DIYer adds giant heat sink to overheating Lumix GF7 camera

09 Jul

One industrious Lumix GF7 owner named Eric Strebel has solved his camera’s overheating issue with a pretty intense DIY hack. Namely, he added a massive heat sink to the back of the camera…. problem solved.

The entire hacking process is detailed in a video that Strebel uploaded to YouTube, where he explains that his camera would, at times, warn him to let it cool down due to overheating while shooting video. The heat sink, which is attached to the camera using piano wire, is very effective at keeping the camera cool for long recording sessions.

The GF7 features a hinged display that can be flipped up, leaving the back of the camera flat and exposed. It is on that portion of the camera that Strebel mounted the heat sink, which he harvested from an old PC. A drill press was used to machine the heat sink to size, while piano wire was bent and utilized as a removable attachment point for mounting the heat sink onto the camera.

The entire project, explains Strebel, took about 4 hours to complete.

Articles: Digital Photography Review (dpreview.com)

Comments Off

Posted in Uncategorized

Over Board: Sink or Skate on This Amazing Floating Ramp

02 Sep

[ By Steph in Architecture & Cities & Urbanism. ]

Floating Skate Ramp 1

It’s hard to imagine a more idyllic place to practice skate tricks than a sculptural wooden ramp floating on the crystalline waters of Lake Tahoe. In some of the photos, it almost doesn’t look real, the skaters captured in mid-air seeming jarringly out of place agains the surface of the water.

Floating Skateboard Ramp 4

Skateboarding pro Bob Burnquist got the opportunity to build the ramp in 2013 when Visit California asked him to think big, coming up with an idea that might seem a little nuts at first but was actually achievable. Working with Miami art director Jerry Blohm, Burnquist created a wooden structure on a floating base, featuring a half pipe, a quarter pipe and a 45-degree ramp.

Floating Skate Ramp 2

Floating Skate Ramp 4

The fact that it sits entirely upon the surface of the water is part of what makes it seem so unreal. It’s built on a steel frame with weighted riggers that keep it from moving around too much in the water. It took 30 man hours and 1,250 screws to finish the 7,300-pound structure.

Floating Skate Ramp 3

FLoating Skateboard Ramp 5

You might be thinking, “Isn’t there a danger of skating right off the edge?” Yes, there definitely is, even for professionals – and that’s why Bob had a wet-suited snorkeler waiting to retrieve his skateboard anytime it went into the water during this shoot.